| // SPDX-License-Identifier: GPL-2.0-or-later |
| |
| #include "linux/virtio_pci.h" |
| #include <linux/virtio_pci_legacy.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| |
| |
| /* |
| * vp_legacy_probe: probe the legacy virtio pci device, note that the |
| * caller is required to enable PCI device before calling this function. |
| * @ldev: the legacy virtio-pci device |
| * |
| * Return 0 on succeed otherwise fail |
| */ |
| int vp_legacy_probe(struct virtio_pci_legacy_device *ldev) |
| { |
| struct pci_dev *pci_dev = ldev->pci_dev; |
| int rc; |
| |
| /* We only own devices >= 0x1000 and <= 0x103f: leave the rest. */ |
| if (pci_dev->device < 0x1000 || pci_dev->device > 0x103f) |
| return -ENODEV; |
| |
| if (pci_dev->revision != VIRTIO_PCI_ABI_VERSION) |
| return -ENODEV; |
| |
| rc = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(64)); |
| if (rc) { |
| rc = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32)); |
| } else { |
| /* |
| * The virtio ring base address is expressed as a 32-bit PFN, |
| * with a page size of 1 << VIRTIO_PCI_QUEUE_ADDR_SHIFT. |
| */ |
| dma_set_coherent_mask(&pci_dev->dev, |
| DMA_BIT_MASK(32 + VIRTIO_PCI_QUEUE_ADDR_SHIFT)); |
| } |
| |
| if (rc) |
| dev_warn(&pci_dev->dev, "Failed to enable 64-bit or 32-bit DMA. Trying to continue, but this might not work.\n"); |
| |
| rc = pci_request_region(pci_dev, 0, "virtio-pci-legacy"); |
| if (rc) |
| return rc; |
| |
| ldev->ioaddr = pci_iomap(pci_dev, 0, 0); |
| if (!ldev->ioaddr) |
| goto err_iomap; |
| |
| ldev->isr = ldev->ioaddr + VIRTIO_PCI_ISR; |
| |
| ldev->id.vendor = pci_dev->subsystem_vendor; |
| ldev->id.device = pci_dev->subsystem_device; |
| |
| return 0; |
| err_iomap: |
| pci_release_region(pci_dev, 0); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(vp_legacy_probe); |
| |
| /* |
| * vp_legacy_probe: remove and cleanup the legacy virtio pci device |
| * @ldev: the legacy virtio-pci device |
| */ |
| void vp_legacy_remove(struct virtio_pci_legacy_device *ldev) |
| { |
| struct pci_dev *pci_dev = ldev->pci_dev; |
| |
| pci_iounmap(pci_dev, ldev->ioaddr); |
| pci_release_region(pci_dev, 0); |
| } |
| EXPORT_SYMBOL_GPL(vp_legacy_remove); |
| |
| /* |
| * vp_legacy_get_features - get features from device |
| * @ldev: the legacy virtio-pci device |
| * |
| * Returns the features read from the device |
| */ |
| u64 vp_legacy_get_features(struct virtio_pci_legacy_device *ldev) |
| { |
| |
| return ioread32(ldev->ioaddr + VIRTIO_PCI_HOST_FEATURES); |
| } |
| EXPORT_SYMBOL_GPL(vp_legacy_get_features); |
| |
| /* |
| * vp_legacy_get_driver_features - get driver features from device |
| * @ldev: the legacy virtio-pci device |
| * |
| * Returns the driver features read from the device |
| */ |
| u64 vp_legacy_get_driver_features(struct virtio_pci_legacy_device *ldev) |
| { |
| return ioread32(ldev->ioaddr + VIRTIO_PCI_GUEST_FEATURES); |
| } |
| EXPORT_SYMBOL_GPL(vp_legacy_get_driver_features); |
| |
| /* |
| * vp_legacy_set_features - set features to device |
| * @ldev: the legacy virtio-pci device |
| * @features: the features set to device |
| */ |
| void vp_legacy_set_features(struct virtio_pci_legacy_device *ldev, |
| u32 features) |
| { |
| iowrite32(features, ldev->ioaddr + VIRTIO_PCI_GUEST_FEATURES); |
| } |
| EXPORT_SYMBOL_GPL(vp_legacy_set_features); |
| |
| /* |
| * vp_legacy_get_status - get the device status |
| * @ldev: the legacy virtio-pci device |
| * |
| * Returns the status read from device |
| */ |
| u8 vp_legacy_get_status(struct virtio_pci_legacy_device *ldev) |
| { |
| return ioread8(ldev->ioaddr + VIRTIO_PCI_STATUS); |
| } |
| EXPORT_SYMBOL_GPL(vp_legacy_get_status); |
| |
| /* |
| * vp_legacy_set_status - set status to device |
| * @ldev: the legacy virtio-pci device |
| * @status: the status set to device |
| */ |
| void vp_legacy_set_status(struct virtio_pci_legacy_device *ldev, |
| u8 status) |
| { |
| iowrite8(status, ldev->ioaddr + VIRTIO_PCI_STATUS); |
| } |
| EXPORT_SYMBOL_GPL(vp_legacy_set_status); |
| |
| /* |
| * vp_legacy_queue_vector - set the MSIX vector for a specific virtqueue |
| * @ldev: the legacy virtio-pci device |
| * @index: queue index |
| * @vector: the config vector |
| * |
| * Returns the config vector read from the device |
| */ |
| u16 vp_legacy_queue_vector(struct virtio_pci_legacy_device *ldev, |
| u16 index, u16 vector) |
| { |
| iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); |
| iowrite16(vector, ldev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); |
| /* Flush the write out to device */ |
| return ioread16(ldev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); |
| } |
| EXPORT_SYMBOL_GPL(vp_legacy_queue_vector); |
| |
| /* |
| * vp_legacy_config_vector - set the vector for config interrupt |
| * @ldev: the legacy virtio-pci device |
| * @vector: the config vector |
| * |
| * Returns the config vector read from the device |
| */ |
| u16 vp_legacy_config_vector(struct virtio_pci_legacy_device *ldev, |
| u16 vector) |
| { |
| /* Setup the vector used for configuration events */ |
| iowrite16(vector, ldev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); |
| /* Verify we had enough resources to assign the vector */ |
| /* Will also flush the write out to device */ |
| return ioread16(ldev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); |
| } |
| EXPORT_SYMBOL_GPL(vp_legacy_config_vector); |
| |
| /* |
| * vp_legacy_set_queue_address - set the virtqueue address |
| * @ldev: the legacy virtio-pci device |
| * @index: the queue index |
| * @queue_pfn: pfn of the virtqueue |
| */ |
| void vp_legacy_set_queue_address(struct virtio_pci_legacy_device *ldev, |
| u16 index, u32 queue_pfn) |
| { |
| iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); |
| iowrite32(queue_pfn, ldev->ioaddr + VIRTIO_PCI_QUEUE_PFN); |
| } |
| EXPORT_SYMBOL_GPL(vp_legacy_set_queue_address); |
| |
| /* |
| * vp_legacy_get_queue_enable - enable a virtqueue |
| * @ldev: the legacy virtio-pci device |
| * @index: the queue index |
| * |
| * Returns whether a virtqueue is enabled or not |
| */ |
| bool vp_legacy_get_queue_enable(struct virtio_pci_legacy_device *ldev, |
| u16 index) |
| { |
| iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); |
| return ioread32(ldev->ioaddr + VIRTIO_PCI_QUEUE_PFN); |
| } |
| EXPORT_SYMBOL_GPL(vp_legacy_get_queue_enable); |
| |
| /* |
| * vp_legacy_get_queue_size - get size for a virtqueue |
| * @ldev: the legacy virtio-pci device |
| * @index: the queue index |
| * |
| * Returns the size of the virtqueue |
| */ |
| u16 vp_legacy_get_queue_size(struct virtio_pci_legacy_device *ldev, |
| u16 index) |
| { |
| iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); |
| return ioread16(ldev->ioaddr + VIRTIO_PCI_QUEUE_NUM); |
| } |
| EXPORT_SYMBOL_GPL(vp_legacy_get_queue_size); |
| |
| MODULE_VERSION("0.1"); |
| MODULE_DESCRIPTION("Legacy Virtio PCI Device"); |
| MODULE_AUTHOR("Wu Zongyong <wuzongyong@linux.alibaba.com>"); |
| MODULE_LICENSE("GPL"); |