| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/media/i2c/ov5647.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Omnivision OV5647 raw image sensor |
| |
| maintainers: |
| - Dave Stevenson <dave.stevenson@raspberrypi.com> |
| - Jacopo Mondi <jacopo@jmondi.org> |
| |
| description: |- |
| The OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data |
| interfaces and CCI (I2C compatible) control bus. |
| |
| properties: |
| compatible: |
| const: ovti,ov5647 |
| |
| reg: |
| description: I2C device address. |
| maxItems: 1 |
| |
| clocks: |
| description: Reference to the xclk clock. |
| maxItems: 1 |
| |
| pwdn-gpios: |
| description: Reference to the GPIO connected to the pwdn pin. Active high. |
| maxItems: 1 |
| |
| port: |
| type: object |
| description: |- |
| Should contain one endpoint sub-node used to model connection to the |
| video receiver according to the specification defined in |
| Documentation/devicetree/bindings/media/video-interfaces.txt. |
| |
| properties: |
| endpoint: |
| type: object |
| |
| properties: |
| remote-endpoint: |
| description: |- |
| phandle to the video receiver input port. |
| |
| clock-noncontinuous: |
| type: boolean |
| description: |- |
| Set to true to allow MIPI CSI-2 non-continuous clock operations. |
| |
| additionalProperties: false |
| |
| additionalProperties: false |
| |
| required: |
| - compatible |
| - reg |
| - clocks |
| - port |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ov5647: camera@36 { |
| compatible = "ovti,ov5647"; |
| reg = <0x36>; |
| clocks = <&camera_clk>; |
| pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; |
| |
| port { |
| camera_out: endpoint { |
| remote-endpoint = <&csi1_ep1>; |
| }; |
| }; |
| }; |
| }; |
| |
| ... |
