| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mtd/ingenic,nand.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Ingenic SoCs NAND controller devicetree bindings |
| |
| maintainers: |
| - Paul Cercueil <paul@crapouillou.net> |
| |
| allOf: |
| - $ref: nand-controller.yaml# |
| |
| properties: |
| compatible: |
| enum: |
| - ingenic,jz4740-nand |
| - ingenic,jz4725b-nand |
| - ingenic,jz4780-nand |
| |
| reg: |
| items: |
| - description: Bank number, offset and size of first attached NAND chip |
| - description: Bank number, offset and size of second attached NAND chip |
| - description: Bank number, offset and size of third attached NAND chip |
| - description: Bank number, offset and size of fourth attached NAND chip |
| minItems: 1 |
| |
| ecc-engine: true |
| |
| partitions: |
| type: object |
| description: |
| Node containing description of fixed partitions. |
| See Documentation/devicetree/bindings/mtd/partition.txt |
| |
| patternProperties: |
| "^nand@[a-f0-9]$": |
| type: object |
| properties: |
| rb-gpios: |
| description: GPIO specifier for the busy pin. |
| maxItems: 1 |
| |
| wp-gpios: |
| description: GPIO specifier for the write-protect pin. |
| maxItems: 1 |
| |
| required: |
| - compatible |
| - reg |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/jz4780-cgu.h> |
| memory-controller@13410000 { |
| compatible = "ingenic,jz4780-nemc"; |
| reg = <0x13410000 0x10000>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges = <1 0 0x1b000000 0x1000000>, |
| <2 0 0x1a000000 0x1000000>, |
| <3 0 0x19000000 0x1000000>, |
| <4 0 0x18000000 0x1000000>, |
| <5 0 0x17000000 0x1000000>, |
| <6 0 0x16000000 0x1000000>; |
| |
| clocks = <&cgu JZ4780_CLK_NEMC>; |
| |
| nand-controller@1 { |
| compatible = "ingenic,jz4780-nand"; |
| reg = <1 0 0x1000000>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ecc-engine = <&bch>; |
| |
| ingenic,nemc-tAS = <10>; |
| ingenic,nemc-tAH = <5>; |
| ingenic,nemc-tBP = <10>; |
| ingenic,nemc-tAW = <15>; |
| ingenic,nemc-tSTRV = <100>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pins_nemc>; |
| |
| nand@1 { |
| reg = <1>; |
| |
| nand-ecc-step-size = <1024>; |
| nand-ecc-strength = <24>; |
| nand-ecc-mode = "hw"; |
| nand-on-flash-bbt; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pins_nemc_cs1>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| partition@0 { |
| label = "u-boot-spl"; |
| reg = <0x0 0x0 0x0 0x800000>; |
| }; |
| |
| partition@800000 { |
| label = "u-boot"; |
| reg = <0x0 0x800000 0x0 0x200000>; |
| }; |
| |
| partition@a00000 { |
| label = "u-boot-env"; |
| reg = <0x0 0xa00000 0x0 0x200000>; |
| }; |
| |
| partition@c00000 { |
| label = "boot"; |
| reg = <0x0 0xc00000 0x0 0x4000000>; |
| }; |
| |
| partition@4c00000 { |
| label = "system"; |
| reg = <0x0 0x4c00000 0x1 0xfb400000>; |
| }; |
| }; |
| }; |
| }; |
| }; |