| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc. |
| * All rights reserved. |
| * |
| * Purpose: Handle USB control endpoint |
| * |
| * Author: Warren Hsu |
| * |
| * Date: Mar. 29, 2005 |
| * |
| * Functions: |
| * vnt_control_out - Write variable length bytes to MEM/BB/MAC/EEPROM |
| * vnt_control_in - Read variable length bytes from MEM/BB/MAC/EEPROM |
| * vnt_control_out_u8 - Write one byte to MEM/BB/MAC/EEPROM |
| * vnt_control_in_u8 - Read one byte from MEM/BB/MAC/EEPROM |
| * |
| * Revision History: |
| * 04-05-2004 Jerry Chen: Initial release |
| * 11-24-2004 Warren Hsu: Add ControlvWriteByte,ControlvReadByte, |
| * ControlvMaskByte |
| * |
| */ |
| |
| #include "rxtx.h" |
| #include "desc.h" |
| #include "device.h" |
| #include "usbpipe.h" |
| #include "mac.h" |
| #include "rf.h" |
| |
| #define USB_CTL_WAIT 500 /* ms */ |
| |
| int vnt_control_out(struct vnt_private *priv, u8 request, u16 value, |
| u16 index, u16 length, const u8 *buffer) |
| { |
| int ret = 0; |
| u8 *usb_buffer; |
| |
| if (test_bit(DEVICE_FLAGS_DISCONNECTED, &priv->flags)) { |
| ret = -EINVAL; |
| goto end; |
| } |
| |
| mutex_lock(&priv->usb_lock); |
| |
| usb_buffer = kmemdup(buffer, length, GFP_KERNEL); |
| if (!usb_buffer) { |
| ret = -ENOMEM; |
| goto end_unlock; |
| } |
| |
| ret = usb_control_msg(priv->usb, |
| usb_sndctrlpipe(priv->usb, 0), |
| request, 0x40, value, |
| index, usb_buffer, length, USB_CTL_WAIT); |
| |
| kfree(usb_buffer); |
| |
| if (ret == (int)length) |
| ret = 0; |
| else |
| ret = -EIO; |
| |
| end_unlock: |
| mutex_unlock(&priv->usb_lock); |
| end: |
| return ret; |
| } |
| |
| int vnt_control_out_u8(struct vnt_private *priv, u8 reg, u8 reg_off, u8 data) |
| { |
| return vnt_control_out(priv, MESSAGE_TYPE_WRITE, |
| reg_off, reg, sizeof(u8), &data); |
| } |
| |
| int vnt_control_out_blocks(struct vnt_private *priv, |
| u16 block, u8 reg, u16 length, const u8 *data) |
| { |
| int ret = 0, i; |
| |
| for (i = 0; i < length; i += block) { |
| u16 len = min_t(int, length - i, block); |
| |
| ret = vnt_control_out(priv, MESSAGE_TYPE_WRITE, |
| i, reg, len, data + i); |
| if (ret) |
| goto end; |
| } |
| end: |
| return ret; |
| } |
| |
| int vnt_control_in(struct vnt_private *priv, u8 request, u16 value, |
| u16 index, u16 length, u8 *buffer) |
| { |
| int ret = 0; |
| u8 *usb_buffer; |
| |
| if (test_bit(DEVICE_FLAGS_DISCONNECTED, &priv->flags)) { |
| ret = -EINVAL; |
| goto end; |
| } |
| |
| mutex_lock(&priv->usb_lock); |
| |
| usb_buffer = kmalloc(length, GFP_KERNEL); |
| if (!usb_buffer) { |
| ret = -ENOMEM; |
| goto end_unlock; |
| } |
| |
| ret = usb_control_msg(priv->usb, |
| usb_rcvctrlpipe(priv->usb, 0), |
| request, 0xc0, value, |
| index, usb_buffer, length, USB_CTL_WAIT); |
| |
| if (ret == length) |
| memcpy(buffer, usb_buffer, length); |
| |
| kfree(usb_buffer); |
| |
| if (ret == (int)length) |
| ret = 0; |
| else |
| ret = -EIO; |
| |
| end_unlock: |
| mutex_unlock(&priv->usb_lock); |
| end: |
| return ret; |
| } |
| |
| int vnt_control_in_u8(struct vnt_private *priv, u8 reg, u8 reg_off, u8 *data) |
| { |
| return vnt_control_in(priv, MESSAGE_TYPE_READ, |
| reg_off, reg, sizeof(u8), data); |
| } |
| |
| static int vnt_int_report_rate(struct vnt_private *priv, u8 pkt_no, u8 tsr) |
| { |
| struct vnt_usb_send_context *context; |
| struct ieee80211_tx_info *info; |
| u8 tx_retry = (tsr & 0xf0) >> 4; |
| s8 idx; |
| |
| if (pkt_no >= priv->num_tx_context) |
| return -EINVAL; |
| |
| context = priv->tx_context[pkt_no]; |
| |
| if (!context->skb) |
| return -EINVAL; |
| |
| info = IEEE80211_SKB_CB(context->skb); |
| idx = info->control.rates[0].idx; |
| |
| ieee80211_tx_info_clear_status(info); |
| |
| info->status.rates[0].count = tx_retry; |
| |
| if (!(tsr & TSR_TMO)) { |
| info->status.rates[0].idx = idx; |
| |
| if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) |
| info->flags |= IEEE80211_TX_STAT_ACK; |
| } |
| |
| ieee80211_tx_status_irqsafe(priv->hw, context->skb); |
| |
| context->in_use = false; |
| |
| return 0; |
| } |
| |
| static void vnt_int_process_data(struct vnt_private *priv) |
| { |
| struct vnt_interrupt_data *int_data; |
| struct ieee80211_low_level_stats *low_stats = &priv->low_stats; |
| |
| dev_dbg(&priv->usb->dev, "---->s_nsInterruptProcessData\n"); |
| |
| int_data = (struct vnt_interrupt_data *)priv->int_buf.data_buf; |
| |
| if (int_data->tsr0 & TSR_VALID) |
| vnt_int_report_rate(priv, int_data->pkt0, int_data->tsr0); |
| |
| if (int_data->tsr1 & TSR_VALID) |
| vnt_int_report_rate(priv, int_data->pkt1, int_data->tsr1); |
| |
| if (int_data->tsr2 & TSR_VALID) |
| vnt_int_report_rate(priv, int_data->pkt2, int_data->tsr2); |
| |
| if (int_data->tsr3 & TSR_VALID) |
| vnt_int_report_rate(priv, int_data->pkt3, int_data->tsr3); |
| |
| if (!int_data->isr0) |
| return; |
| |
| if (int_data->isr0 & ISR_BNTX && priv->op_mode == NL80211_IFTYPE_AP) |
| vnt_schedule_command(priv, WLAN_CMD_BECON_SEND); |
| |
| priv->current_tsf = le64_to_cpu(int_data->tsf); |
| |
| low_stats->dot11RTSSuccessCount += int_data->rts_success; |
| low_stats->dot11RTSFailureCount += int_data->rts_fail; |
| low_stats->dot11ACKFailureCount += int_data->ack_fail; |
| low_stats->dot11FCSErrorCount += int_data->fcs_err; |
| } |
| |
| static void vnt_start_interrupt_urb_complete(struct urb *urb) |
| { |
| struct vnt_private *priv = urb->context; |
| int status = urb->status; |
| |
| switch (status) { |
| case 0: |
| case -ETIMEDOUT: |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| return; |
| default: |
| break; |
| } |
| |
| if (status) |
| dev_dbg(&priv->usb->dev, "%s status = %d\n", __func__, status); |
| else |
| vnt_int_process_data(priv); |
| |
| status = usb_submit_urb(priv->interrupt_urb, GFP_ATOMIC); |
| if (status) |
| dev_dbg(&priv->usb->dev, "Submit int URB failed %d\n", status); |
| } |
| |
| int vnt_start_interrupt_urb(struct vnt_private *priv) |
| { |
| int ret = 0; |
| |
| dev_dbg(&priv->usb->dev, "---->Interrupt Polling Thread\n"); |
| |
| usb_fill_int_urb(priv->interrupt_urb, |
| priv->usb, |
| usb_rcvintpipe(priv->usb, 1), |
| priv->int_buf.data_buf, |
| MAX_INTERRUPT_SIZE, |
| vnt_start_interrupt_urb_complete, |
| priv, |
| priv->int_interval); |
| |
| ret = usb_submit_urb(priv->interrupt_urb, GFP_ATOMIC); |
| if (ret) |
| dev_dbg(&priv->usb->dev, "Submit int URB failed %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int vnt_rx_data(struct vnt_private *priv, struct vnt_rcb *ptr_rcb, |
| unsigned long bytes_received) |
| { |
| struct ieee80211_hw *hw = priv->hw; |
| struct ieee80211_supported_band *sband; |
| struct sk_buff *skb; |
| struct ieee80211_rx_status *rx_status; |
| struct vnt_rx_header *head; |
| struct vnt_rx_tail *tail; |
| u32 frame_size; |
| int ii; |
| u16 rx_bitrate, pay_load_with_padding; |
| u8 rate_idx = 0; |
| long rx_dbm; |
| |
| skb = ptr_rcb->skb; |
| rx_status = IEEE80211_SKB_RXCB(skb); |
| |
| /* [31:16]RcvByteCount ( not include 4-byte Status ) */ |
| head = (struct vnt_rx_header *)skb->data; |
| frame_size = head->wbk_status >> 16; |
| frame_size += 4; |
| |
| if (bytes_received != frame_size) { |
| dev_dbg(&priv->usb->dev, "------- WRONG Length 1\n"); |
| return false; |
| } |
| |
| if ((bytes_received > 2372) || (bytes_received <= 40)) { |
| /* Frame Size error drop this packet.*/ |
| dev_dbg(&priv->usb->dev, "------ WRONG Length 2\n"); |
| return false; |
| } |
| |
| /* real Frame Size = USBframe_size -4WbkStatus - 4RxStatus */ |
| /* -8TSF - 4RSR - 4SQ3 - ?Padding */ |
| |
| /* if SQ3 the range is 24~27, if no SQ3 the range is 20~23 */ |
| |
| /*Fix hardware bug => PLCP_Length error */ |
| if (((bytes_received - head->pay_load_len) > 27) || |
| ((bytes_received - head->pay_load_len) < 24) || |
| (bytes_received < head->pay_load_len)) { |
| dev_dbg(&priv->usb->dev, "Wrong PLCP Length %x\n", |
| head->pay_load_len); |
| return false; |
| } |
| |
| sband = hw->wiphy->bands[hw->conf.chandef.chan->band]; |
| rx_bitrate = head->rx_rate * 5; /* rx_rate * 5 */ |
| |
| for (ii = 0; ii < sband->n_bitrates; ii++) { |
| if (sband->bitrates[ii].bitrate == rx_bitrate) { |
| rate_idx = ii; |
| break; |
| } |
| } |
| |
| if (ii == sband->n_bitrates) { |
| dev_dbg(&priv->usb->dev, "Wrong Rx Bit Rate %d\n", rx_bitrate); |
| return false; |
| } |
| |
| pay_load_with_padding = ((head->pay_load_len / 4) + |
| ((head->pay_load_len % 4) ? 1 : 0)) * 4; |
| |
| tail = (struct vnt_rx_tail *)(skb->data + |
| sizeof(*head) + pay_load_with_padding); |
| priv->tsf_time = le64_to_cpu(tail->tsf_time); |
| |
| if (tail->rsr & (RSR_IVLDTYP | RSR_IVLDLEN)) |
| return false; |
| |
| vnt_rf_rssi_to_dbm(priv, tail->rssi, &rx_dbm); |
| |
| priv->bb_pre_ed_rssi = (u8)-rx_dbm + 1; |
| priv->current_rssi = priv->bb_pre_ed_rssi; |
| |
| skb_pull(skb, sizeof(*head)); |
| skb_trim(skb, head->pay_load_len); |
| |
| rx_status->mactime = priv->tsf_time; |
| rx_status->band = hw->conf.chandef.chan->band; |
| rx_status->signal = rx_dbm; |
| rx_status->flag = 0; |
| rx_status->freq = hw->conf.chandef.chan->center_freq; |
| |
| if (!(tail->rsr & RSR_CRCOK)) |
| rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; |
| |
| rx_status->rate_idx = rate_idx; |
| |
| if (tail->new_rsr & NEWRSR_DECRYPTOK) |
| rx_status->flag |= RX_FLAG_DECRYPTED; |
| |
| ieee80211_rx_irqsafe(priv->hw, skb); |
| |
| return true; |
| } |
| |
| static void vnt_submit_rx_urb_complete(struct urb *urb) |
| { |
| struct vnt_rcb *rcb = urb->context; |
| struct vnt_private *priv = rcb->priv; |
| |
| switch (urb->status) { |
| case 0: |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| return; |
| case -ETIMEDOUT: |
| default: |
| dev_dbg(&priv->usb->dev, "BULK In failed %d\n", urb->status); |
| break; |
| } |
| |
| if (urb->actual_length) { |
| if (vnt_rx_data(priv, rcb, urb->actual_length)) { |
| rcb->skb = dev_alloc_skb(priv->rx_buf_sz); |
| if (!rcb->skb) |
| return; |
| } else { |
| skb_push(rcb->skb, skb_headroom(rcb->skb)); |
| skb_trim(rcb->skb, 0); |
| } |
| |
| urb->transfer_buffer = skb_put(rcb->skb, |
| skb_tailroom(rcb->skb)); |
| } |
| |
| if (usb_submit_urb(urb, GFP_ATOMIC)) |
| dev_dbg(&priv->usb->dev, "Failed to re submit rx skb\n"); |
| } |
| |
| int vnt_submit_rx_urb(struct vnt_private *priv, struct vnt_rcb *rcb) |
| { |
| int ret = 0; |
| struct urb *urb = rcb->urb; |
| |
| if (!rcb->skb) { |
| dev_dbg(&priv->usb->dev, "rcb->skb is null\n"); |
| ret = -EINVAL; |
| goto end; |
| } |
| |
| usb_fill_bulk_urb(urb, |
| priv->usb, |
| usb_rcvbulkpipe(priv->usb, 2), |
| skb_put(rcb->skb, skb_tailroom(rcb->skb)), |
| MAX_TOTAL_SIZE_WITH_ALL_HEADERS, |
| vnt_submit_rx_urb_complete, |
| rcb); |
| |
| ret = usb_submit_urb(urb, GFP_ATOMIC); |
| if (ret) |
| dev_dbg(&priv->usb->dev, "Submit Rx URB failed %d\n", ret); |
| end: |
| return ret; |
| } |
| |
| static void vnt_tx_context_complete(struct urb *urb) |
| { |
| struct vnt_usb_send_context *context = urb->context; |
| struct vnt_private *priv = context->priv; |
| |
| switch (urb->status) { |
| case 0: |
| dev_dbg(&priv->usb->dev, |
| "Write %d bytes\n", urb->actual_length); |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| context->in_use = false; |
| return; |
| case -ETIMEDOUT: |
| default: |
| dev_dbg(&priv->usb->dev, "BULK Out failed %d\n", urb->status); |
| break; |
| } |
| |
| if (context->type == CONTEXT_DATA_PACKET) |
| ieee80211_wake_queues(priv->hw); |
| |
| if (urb->status || context->type == CONTEXT_BEACON_PACKET) { |
| if (context->skb) |
| ieee80211_free_txskb(priv->hw, context->skb); |
| |
| context->in_use = false; |
| } |
| } |
| |
| int vnt_tx_context(struct vnt_private *priv, |
| struct vnt_usb_send_context *context, |
| struct sk_buff *skb) |
| { |
| struct vnt_tx_usb_header *usb; |
| struct urb *urb; |
| int status; |
| u16 count = skb->len; |
| |
| usb = skb_push(skb, sizeof(*usb)); |
| usb->tx_byte_count = cpu_to_le16(count); |
| usb->pkt_no = context->pkt_no; |
| usb->type = context->type; |
| |
| if (test_bit(DEVICE_FLAGS_DISCONNECTED, &priv->flags)) { |
| context->in_use = false; |
| return -ENODEV; |
| } |
| |
| if (skb->len > MAX_TOTAL_SIZE_WITH_ALL_HEADERS) { |
| context->in_use = false; |
| return -E2BIG; |
| } |
| |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!urb) { |
| context->in_use = false; |
| return -ENOMEM; |
| } |
| |
| usb_fill_bulk_urb(urb, |
| priv->usb, |
| usb_sndbulkpipe(priv->usb, 3), |
| skb->data, |
| skb->len, |
| vnt_tx_context_complete, |
| context); |
| |
| usb_anchor_urb(urb, &priv->tx_submitted); |
| |
| status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (status) { |
| dev_dbg(&priv->usb->dev, "Submit Tx URB failed %d\n", status); |
| usb_unanchor_urb(urb); |
| context->in_use = false; |
| } |
| |
| usb_free_urb(urb); |
| |
| return status; |
| } |