| // SPDX-License-Identifier: MIT |
| /* |
| * Copyright © 2021 Intel Corporation |
| */ |
| |
| #include <drm/drm_framebuffer.h> |
| #include <drm/drm_modeset_helper.h> |
| |
| #include "i915_drv.h" |
| #include "intel_display.h" |
| #include "intel_display_types.h" |
| #include "intel_dpt.h" |
| #include "intel_fb.h" |
| |
| #define check_array_bounds(i915, a, i) drm_WARN_ON(&(i915)->drm, (i) >= ARRAY_SIZE(a)) |
| |
| /* |
| * From the Sky Lake PRM: |
| * "The Color Control Surface (CCS) contains the compression status of |
| * the cache-line pairs. The compression state of the cache-line pair |
| * is specified by 2 bits in the CCS. Each CCS cache-line represents |
| * an area on the main surface of 16 x16 sets of 128 byte Y-tiled |
| * cache-line-pairs. CCS is always Y tiled." |
| * |
| * Since cache line pairs refers to horizontally adjacent cache lines, |
| * each cache line in the CCS corresponds to an area of 32x16 cache |
| * lines on the main surface. Since each pixel is 4 bytes, this gives |
| * us a ratio of one byte in the CCS for each 8x16 pixels in the |
| * main surface. |
| */ |
| static const struct drm_format_info skl_ccs_formats[] = { |
| { .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 2, |
| .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, }, |
| { .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 2, |
| .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, }, |
| { .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 2, |
| .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, .has_alpha = true, }, |
| { .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 2, |
| .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, .has_alpha = true, }, |
| }; |
| |
| /* |
| * Gen-12 compression uses 4 bits of CCS data for each cache line pair in the |
| * main surface. And each 64B CCS cache line represents an area of 4x1 Y-tiles |
| * in the main surface. With 4 byte pixels and each Y-tile having dimensions of |
| * 32x32 pixels, the ratio turns out to 1B in the CCS for every 2x32 pixels in |
| * the main surface. |
| */ |
| static const struct drm_format_info gen12_ccs_formats[] = { |
| { .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 2, |
| .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 1, .vsub = 1, }, |
| { .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 2, |
| .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 1, .vsub = 1, }, |
| { .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 2, |
| .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 1, .vsub = 1, .has_alpha = true }, |
| { .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 2, |
| .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 1, .vsub = 1, .has_alpha = true }, |
| { .format = DRM_FORMAT_YUYV, .num_planes = 2, |
| .char_per_block = { 2, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 2, .vsub = 1, .is_yuv = true }, |
| { .format = DRM_FORMAT_YVYU, .num_planes = 2, |
| .char_per_block = { 2, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 2, .vsub = 1, .is_yuv = true }, |
| { .format = DRM_FORMAT_UYVY, .num_planes = 2, |
| .char_per_block = { 2, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 2, .vsub = 1, .is_yuv = true }, |
| { .format = DRM_FORMAT_VYUY, .num_planes = 2, |
| .char_per_block = { 2, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 2, .vsub = 1, .is_yuv = true }, |
| { .format = DRM_FORMAT_XYUV8888, .num_planes = 2, |
| .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 1, .vsub = 1, .is_yuv = true }, |
| { .format = DRM_FORMAT_NV12, .num_planes = 4, |
| .char_per_block = { 1, 2, 1, 1 }, .block_w = { 1, 1, 4, 4 }, .block_h = { 1, 1, 1, 1 }, |
| .hsub = 2, .vsub = 2, .is_yuv = true }, |
| { .format = DRM_FORMAT_P010, .num_planes = 4, |
| .char_per_block = { 2, 4, 1, 1 }, .block_w = { 1, 1, 2, 2 }, .block_h = { 1, 1, 1, 1 }, |
| .hsub = 2, .vsub = 2, .is_yuv = true }, |
| { .format = DRM_FORMAT_P012, .num_planes = 4, |
| .char_per_block = { 2, 4, 1, 1 }, .block_w = { 1, 1, 2, 2 }, .block_h = { 1, 1, 1, 1 }, |
| .hsub = 2, .vsub = 2, .is_yuv = true }, |
| { .format = DRM_FORMAT_P016, .num_planes = 4, |
| .char_per_block = { 2, 4, 1, 1 }, .block_w = { 1, 1, 2, 2 }, .block_h = { 1, 1, 1, 1 }, |
| .hsub = 2, .vsub = 2, .is_yuv = true }, |
| }; |
| |
| /* |
| * Same as gen12_ccs_formats[] above, but with additional surface used |
| * to pass Clear Color information in plane 2 with 64 bits of data. |
| */ |
| static const struct drm_format_info gen12_ccs_cc_formats[] = { |
| { .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 3, |
| .char_per_block = { 4, 1, 0 }, .block_w = { 1, 2, 2 }, .block_h = { 1, 1, 1 }, |
| .hsub = 1, .vsub = 1, }, |
| { .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 3, |
| .char_per_block = { 4, 1, 0 }, .block_w = { 1, 2, 2 }, .block_h = { 1, 1, 1 }, |
| .hsub = 1, .vsub = 1, }, |
| { .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 3, |
| .char_per_block = { 4, 1, 0 }, .block_w = { 1, 2, 2 }, .block_h = { 1, 1, 1 }, |
| .hsub = 1, .vsub = 1, .has_alpha = true }, |
| { .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 3, |
| .char_per_block = { 4, 1, 0 }, .block_w = { 1, 2, 2 }, .block_h = { 1, 1, 1 }, |
| .hsub = 1, .vsub = 1, .has_alpha = true }, |
| }; |
| |
| struct intel_modifier_desc { |
| u64 modifier; |
| struct { |
| u8 from; |
| u8 until; |
| } display_ver; |
| #define DISPLAY_VER_ALL { 0, -1 } |
| |
| const struct drm_format_info *formats; |
| int format_count; |
| #define FORMAT_OVERRIDE(format_list) \ |
| .formats = format_list, \ |
| .format_count = ARRAY_SIZE(format_list) |
| |
| u8 plane_caps; |
| |
| struct { |
| u8 cc_planes:3; |
| u8 packed_aux_planes:4; |
| u8 planar_aux_planes:4; |
| } ccs; |
| }; |
| |
| #define INTEL_PLANE_CAP_CCS_MASK (INTEL_PLANE_CAP_CCS_RC | \ |
| INTEL_PLANE_CAP_CCS_RC_CC | \ |
| INTEL_PLANE_CAP_CCS_MC) |
| #define INTEL_PLANE_CAP_TILING_MASK (INTEL_PLANE_CAP_TILING_X | \ |
| INTEL_PLANE_CAP_TILING_Y | \ |
| INTEL_PLANE_CAP_TILING_Yf) |
| #define INTEL_PLANE_CAP_TILING_NONE 0 |
| |
| static const struct intel_modifier_desc intel_modifiers[] = { |
| { |
| .modifier = I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS, |
| .display_ver = { 12, 13 }, |
| .plane_caps = INTEL_PLANE_CAP_TILING_Y | INTEL_PLANE_CAP_CCS_MC, |
| |
| .ccs.packed_aux_planes = BIT(1), |
| .ccs.planar_aux_planes = BIT(2) | BIT(3), |
| |
| FORMAT_OVERRIDE(gen12_ccs_formats), |
| }, { |
| .modifier = I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS, |
| .display_ver = { 12, 13 }, |
| .plane_caps = INTEL_PLANE_CAP_TILING_Y | INTEL_PLANE_CAP_CCS_RC, |
| |
| .ccs.packed_aux_planes = BIT(1), |
| |
| FORMAT_OVERRIDE(gen12_ccs_formats), |
| }, { |
| .modifier = I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC, |
| .display_ver = { 12, 13 }, |
| .plane_caps = INTEL_PLANE_CAP_TILING_Y | INTEL_PLANE_CAP_CCS_RC_CC, |
| |
| .ccs.cc_planes = BIT(2), |
| .ccs.packed_aux_planes = BIT(1), |
| |
| FORMAT_OVERRIDE(gen12_ccs_cc_formats), |
| }, { |
| .modifier = I915_FORMAT_MOD_Yf_TILED_CCS, |
| .display_ver = { 9, 11 }, |
| .plane_caps = INTEL_PLANE_CAP_TILING_Yf | INTEL_PLANE_CAP_CCS_RC, |
| |
| .ccs.packed_aux_planes = BIT(1), |
| |
| FORMAT_OVERRIDE(skl_ccs_formats), |
| }, { |
| .modifier = I915_FORMAT_MOD_Y_TILED_CCS, |
| .display_ver = { 9, 11 }, |
| .plane_caps = INTEL_PLANE_CAP_TILING_Y | INTEL_PLANE_CAP_CCS_RC, |
| |
| .ccs.packed_aux_planes = BIT(1), |
| |
| FORMAT_OVERRIDE(skl_ccs_formats), |
| }, { |
| .modifier = I915_FORMAT_MOD_Yf_TILED, |
| .display_ver = { 9, 11 }, |
| .plane_caps = INTEL_PLANE_CAP_TILING_Yf, |
| }, { |
| .modifier = I915_FORMAT_MOD_Y_TILED, |
| .display_ver = { 9, 13 }, |
| .plane_caps = INTEL_PLANE_CAP_TILING_Y, |
| }, { |
| .modifier = I915_FORMAT_MOD_X_TILED, |
| .display_ver = DISPLAY_VER_ALL, |
| .plane_caps = INTEL_PLANE_CAP_TILING_X, |
| }, { |
| .modifier = DRM_FORMAT_MOD_LINEAR, |
| .display_ver = DISPLAY_VER_ALL, |
| }, |
| }; |
| |
| static const struct intel_modifier_desc *lookup_modifier_or_null(u64 modifier) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(intel_modifiers); i++) |
| if (intel_modifiers[i].modifier == modifier) |
| return &intel_modifiers[i]; |
| |
| return NULL; |
| } |
| |
| static const struct intel_modifier_desc *lookup_modifier(u64 modifier) |
| { |
| const struct intel_modifier_desc *md = lookup_modifier_or_null(modifier); |
| |
| if (WARN_ON(!md)) |
| return &intel_modifiers[0]; |
| |
| return md; |
| } |
| |
| static const struct drm_format_info * |
| lookup_format_info(const struct drm_format_info formats[], |
| int num_formats, u32 format) |
| { |
| int i; |
| |
| for (i = 0; i < num_formats; i++) { |
| if (formats[i].format == format) |
| return &formats[i]; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * intel_fb_get_format_info: Get a modifier specific format information |
| * @cmd: FB add command structure |
| * |
| * Returns: |
| * Returns the format information for @cmd->pixel_format specific to @cmd->modifier[0], |
| * or %NULL if the modifier doesn't override the format. |
| */ |
| const struct drm_format_info * |
| intel_fb_get_format_info(const struct drm_mode_fb_cmd2 *cmd) |
| { |
| const struct intel_modifier_desc *md = lookup_modifier_or_null(cmd->modifier[0]); |
| |
| if (!md || !md->formats) |
| return NULL; |
| |
| return lookup_format_info(md->formats, md->format_count, cmd->pixel_format); |
| } |
| |
| static bool plane_caps_contain_any(u8 caps, u8 mask) |
| { |
| return caps & mask; |
| } |
| |
| static bool plane_caps_contain_all(u8 caps, u8 mask) |
| { |
| return (caps & mask) == mask; |
| } |
| |
| /** |
| * intel_fb_is_ccs_modifier: Check if a modifier is a CCS modifier type |
| * @modifier: Modifier to check |
| * |
| * Returns: |
| * Returns %true if @modifier is a render, render with color clear or |
| * media compression modifier. |
| */ |
| bool intel_fb_is_ccs_modifier(u64 modifier) |
| { |
| return plane_caps_contain_any(lookup_modifier(modifier)->plane_caps, |
| INTEL_PLANE_CAP_CCS_MASK); |
| } |
| |
| /** |
| * intel_fb_is_rc_ccs_cc_modifier: Check if a modifier is an RC CCS CC modifier type |
| * @modifier: Modifier to check |
| * |
| * Returns: |
| * Returns %true if @modifier is a render with color clear modifier. |
| */ |
| bool intel_fb_is_rc_ccs_cc_modifier(u64 modifier) |
| { |
| return plane_caps_contain_any(lookup_modifier(modifier)->plane_caps, |
| INTEL_PLANE_CAP_CCS_RC_CC); |
| } |
| |
| /** |
| * intel_fb_is_mc_ccs_modifier: Check if a modifier is an MC CCS modifier type |
| * @modifier: Modifier to check |
| * |
| * Returns: |
| * Returns %true if @modifier is a media compression modifier. |
| */ |
| bool intel_fb_is_mc_ccs_modifier(u64 modifier) |
| { |
| return plane_caps_contain_any(lookup_modifier(modifier)->plane_caps, |
| INTEL_PLANE_CAP_CCS_MC); |
| } |
| |
| static bool check_modifier_display_ver_range(const struct intel_modifier_desc *md, |
| u8 display_ver_from, u8 display_ver_until) |
| { |
| return md->display_ver.from <= display_ver_until && |
| display_ver_from <= md->display_ver.until; |
| } |
| |
| static bool plane_has_modifier(struct drm_i915_private *i915, |
| u8 plane_caps, |
| const struct intel_modifier_desc *md) |
| { |
| if (!IS_DISPLAY_VER(i915, md->display_ver.from, md->display_ver.until)) |
| return false; |
| |
| if (!plane_caps_contain_all(plane_caps, md->plane_caps)) |
| return false; |
| |
| return true; |
| } |
| |
| /** |
| * intel_fb_plane_get_modifiers: Get the modifiers for the given platform and plane capabilities |
| * @i915: i915 device instance |
| * @plane_caps: capabilities for the plane the modifiers are queried for |
| * |
| * Returns: |
| * Returns the list of modifiers allowed by the @i915 platform and @plane_caps. |
| * The caller must free the returned buffer. |
| */ |
| u64 *intel_fb_plane_get_modifiers(struct drm_i915_private *i915, |
| u8 plane_caps) |
| { |
| u64 *list, *p; |
| int count = 1; /* +1 for invalid modifier terminator */ |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(intel_modifiers); i++) { |
| if (plane_has_modifier(i915, plane_caps, &intel_modifiers[i])) |
| count++; |
| } |
| |
| list = kmalloc_array(count, sizeof(*list), GFP_KERNEL); |
| if (drm_WARN_ON(&i915->drm, !list)) |
| return NULL; |
| |
| p = list; |
| for (i = 0; i < ARRAY_SIZE(intel_modifiers); i++) { |
| if (plane_has_modifier(i915, plane_caps, &intel_modifiers[i])) |
| *p++ = intel_modifiers[i].modifier; |
| } |
| *p++ = DRM_FORMAT_MOD_INVALID; |
| |
| return list; |
| } |
| |
| /** |
| * intel_fb_plane_supports_modifier: Determine if a modifier is supported by the given plane |
| * @plane: Plane to check the modifier support for |
| * @modifier: The modifier to check the support for |
| * |
| * Returns: |
| * %true if the @modifier is supported on @plane. |
| */ |
| bool intel_fb_plane_supports_modifier(struct intel_plane *plane, u64 modifier) |
| { |
| int i; |
| |
| for (i = 0; i < plane->base.modifier_count; i++) |
| if (plane->base.modifiers[i] == modifier) |
| return true; |
| |
| return false; |
| } |
| |
| static bool format_is_yuv_semiplanar(const struct intel_modifier_desc *md, |
| const struct drm_format_info *info) |
| { |
| int yuv_planes; |
| |
| if (!info->is_yuv) |
| return false; |
| |
| if (plane_caps_contain_any(md->plane_caps, INTEL_PLANE_CAP_CCS_MASK)) |
| yuv_planes = 4; |
| else |
| yuv_planes = 2; |
| |
| return info->num_planes == yuv_planes; |
| } |
| |
| /** |
| * intel_format_info_is_yuv_semiplanar: Check if the given format is YUV semiplanar |
| * @info: format to check |
| * @modifier: modifier used with the format |
| * |
| * Returns: |
| * %true if @info / @modifier is YUV semiplanar. |
| */ |
| bool intel_format_info_is_yuv_semiplanar(const struct drm_format_info *info, |
| u64 modifier) |
| { |
| return format_is_yuv_semiplanar(lookup_modifier(modifier), info); |
| } |
| |
| static u8 ccs_aux_plane_mask(const struct intel_modifier_desc *md, |
| const struct drm_format_info *format) |
| { |
| if (format_is_yuv_semiplanar(md, format)) |
| return md->ccs.planar_aux_planes; |
| else |
| return md->ccs.packed_aux_planes; |
| } |
| |
| /** |
| * intel_fb_is_ccs_aux_plane: Check if a framebuffer color plane is a CCS AUX plane |
| * @fb: Framebuffer |
| * @color_plane: color plane index to check |
| * |
| * Returns: |
| * Returns %true if @fb's color plane at index @color_plane is a CCS AUX plane. |
| */ |
| bool intel_fb_is_ccs_aux_plane(const struct drm_framebuffer *fb, int color_plane) |
| { |
| const struct intel_modifier_desc *md = lookup_modifier(fb->modifier); |
| |
| return ccs_aux_plane_mask(md, fb->format) & BIT(color_plane); |
| } |
| |
| /** |
| * intel_fb_is_gen12_ccs_aux_plane: Check if a framebuffer color plane is a GEN12 CCS AUX plane |
| * @fb: Framebuffer |
| * @color_plane: color plane index to check |
| * |
| * Returns: |
| * Returns %true if @fb's color plane at index @color_plane is a GEN12 CCS AUX plane. |
| */ |
| static bool intel_fb_is_gen12_ccs_aux_plane(const struct drm_framebuffer *fb, int color_plane) |
| { |
| const struct intel_modifier_desc *md = lookup_modifier(fb->modifier); |
| |
| return check_modifier_display_ver_range(md, 12, 13) && |
| ccs_aux_plane_mask(md, fb->format) & BIT(color_plane); |
| } |
| |
| /** |
| * intel_fb_rc_ccs_cc_plane: Get the CCS CC color plane index for a framebuffer |
| * @fb: Framebuffer |
| * |
| * Returns: |
| * Returns the index of the color clear plane for @fb, or -1 if @fb is not a |
| * framebuffer using a render compression/color clear modifier. |
| */ |
| int intel_fb_rc_ccs_cc_plane(const struct drm_framebuffer *fb) |
| { |
| const struct intel_modifier_desc *md = lookup_modifier(fb->modifier); |
| |
| if (!md->ccs.cc_planes) |
| return -1; |
| |
| drm_WARN_ON_ONCE(fb->dev, hweight8(md->ccs.cc_planes) > 1); |
| |
| return ilog2((int)md->ccs.cc_planes); |
| } |
| |
| static bool is_gen12_ccs_cc_plane(const struct drm_framebuffer *fb, int color_plane) |
| { |
| return intel_fb_rc_ccs_cc_plane(fb) == color_plane; |
| } |
| |
| static bool is_semiplanar_uv_plane(const struct drm_framebuffer *fb, int color_plane) |
| { |
| return intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier) && |
| color_plane == 1; |
| } |
| |
| bool is_surface_linear(const struct drm_framebuffer *fb, int color_plane) |
| { |
| return fb->modifier == DRM_FORMAT_MOD_LINEAR || |
| intel_fb_is_gen12_ccs_aux_plane(fb, color_plane) || |
| is_gen12_ccs_cc_plane(fb, color_plane); |
| } |
| |
| int main_to_ccs_plane(const struct drm_framebuffer *fb, int main_plane) |
| { |
| drm_WARN_ON(fb->dev, !intel_fb_is_ccs_modifier(fb->modifier) || |
| (main_plane && main_plane >= fb->format->num_planes / 2)); |
| |
| return fb->format->num_planes / 2 + main_plane; |
| } |
| |
| int skl_ccs_to_main_plane(const struct drm_framebuffer *fb, int ccs_plane) |
| { |
| drm_WARN_ON(fb->dev, !intel_fb_is_ccs_modifier(fb->modifier) || |
| ccs_plane < fb->format->num_planes / 2); |
| |
| if (is_gen12_ccs_cc_plane(fb, ccs_plane)) |
| return 0; |
| |
| return ccs_plane - fb->format->num_planes / 2; |
| } |
| |
| static unsigned int gen12_ccs_aux_stride(struct intel_framebuffer *fb, int ccs_plane) |
| { |
| int main_plane = skl_ccs_to_main_plane(&fb->base, ccs_plane); |
| unsigned int main_stride = fb->base.pitches[main_plane]; |
| unsigned int main_tile_width = intel_tile_width_bytes(&fb->base, main_plane); |
| |
| return DIV_ROUND_UP(main_stride, 4 * main_tile_width) * 64; |
| } |
| |
| int skl_main_to_aux_plane(const struct drm_framebuffer *fb, int main_plane) |
| { |
| struct drm_i915_private *i915 = to_i915(fb->dev); |
| |
| if (intel_fb_is_ccs_modifier(fb->modifier)) |
| return main_to_ccs_plane(fb, main_plane); |
| else if (DISPLAY_VER(i915) < 11 && |
| intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier)) |
| return 1; |
| else |
| return 0; |
| } |
| |
| unsigned int intel_tile_size(const struct drm_i915_private *i915) |
| { |
| return DISPLAY_VER(i915) == 2 ? 2048 : 4096; |
| } |
| |
| unsigned int |
| intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane) |
| { |
| struct drm_i915_private *dev_priv = to_i915(fb->dev); |
| unsigned int cpp = fb->format->cpp[color_plane]; |
| |
| switch (fb->modifier) { |
| case DRM_FORMAT_MOD_LINEAR: |
| return intel_tile_size(dev_priv); |
| case I915_FORMAT_MOD_X_TILED: |
| if (DISPLAY_VER(dev_priv) == 2) |
| return 128; |
| else |
| return 512; |
| case I915_FORMAT_MOD_Y_TILED_CCS: |
| if (intel_fb_is_ccs_aux_plane(fb, color_plane)) |
| return 128; |
| fallthrough; |
| case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS: |
| case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC: |
| case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS: |
| if (intel_fb_is_ccs_aux_plane(fb, color_plane) || |
| is_gen12_ccs_cc_plane(fb, color_plane)) |
| return 64; |
| fallthrough; |
| case I915_FORMAT_MOD_Y_TILED: |
| if (DISPLAY_VER(dev_priv) == 2 || HAS_128_BYTE_Y_TILING(dev_priv)) |
| return 128; |
| else |
| return 512; |
| case I915_FORMAT_MOD_Yf_TILED_CCS: |
| if (intel_fb_is_ccs_aux_plane(fb, color_plane)) |
| return 128; |
| fallthrough; |
| case I915_FORMAT_MOD_Yf_TILED: |
| switch (cpp) { |
| case 1: |
| return 64; |
| case 2: |
| case 4: |
| return 128; |
| case 8: |
| case 16: |
| return 256; |
| default: |
| MISSING_CASE(cpp); |
| return cpp; |
| } |
| break; |
| default: |
| MISSING_CASE(fb->modifier); |
| return cpp; |
| } |
| } |
| |
| unsigned int intel_tile_height(const struct drm_framebuffer *fb, int color_plane) |
| { |
| return intel_tile_size(to_i915(fb->dev)) / |
| intel_tile_width_bytes(fb, color_plane); |
| } |
| |
| /* |
| * Return the tile dimensions in pixel units, based on the (2 or 4 kbyte) GTT |
| * page tile size. |
| */ |
| static void intel_tile_dims(const struct drm_framebuffer *fb, int color_plane, |
| unsigned int *tile_width, |
| unsigned int *tile_height) |
| { |
| unsigned int tile_width_bytes = intel_tile_width_bytes(fb, color_plane); |
| unsigned int cpp = fb->format->cpp[color_plane]; |
| |
| *tile_width = tile_width_bytes / cpp; |
| *tile_height = intel_tile_height(fb, color_plane); |
| } |
| |
| /* |
| * Return the tile dimensions in pixel units, based on the tile block size. |
| * The block covers the full GTT page sized tile on all tiled surfaces and |
| * it's a 64 byte portion of the tile on TGL+ CCS surfaces. |
| */ |
| static void intel_tile_block_dims(const struct drm_framebuffer *fb, int color_plane, |
| unsigned int *tile_width, |
| unsigned int *tile_height) |
| { |
| intel_tile_dims(fb, color_plane, tile_width, tile_height); |
| |
| if (intel_fb_is_gen12_ccs_aux_plane(fb, color_plane)) |
| *tile_height = 1; |
| } |
| |
| unsigned int intel_tile_row_size(const struct drm_framebuffer *fb, int color_plane) |
| { |
| unsigned int tile_width, tile_height; |
| |
| intel_tile_dims(fb, color_plane, &tile_width, &tile_height); |
| |
| return fb->pitches[color_plane] * tile_height; |
| } |
| |
| unsigned int |
| intel_fb_align_height(const struct drm_framebuffer *fb, |
| int color_plane, unsigned int height) |
| { |
| unsigned int tile_height = intel_tile_height(fb, color_plane); |
| |
| return ALIGN(height, tile_height); |
| } |
| |
| static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier) |
| { |
| u8 tiling_caps = lookup_modifier(fb_modifier)->plane_caps & |
| INTEL_PLANE_CAP_TILING_MASK; |
| |
| switch (tiling_caps) { |
| case INTEL_PLANE_CAP_TILING_Y: |
| return I915_TILING_Y; |
| case INTEL_PLANE_CAP_TILING_X: |
| return I915_TILING_X; |
| case INTEL_PLANE_CAP_TILING_Yf: |
| case INTEL_PLANE_CAP_TILING_NONE: |
| return I915_TILING_NONE; |
| default: |
| MISSING_CASE(tiling_caps); |
| return I915_TILING_NONE; |
| } |
| } |
| |
| static bool intel_modifier_uses_dpt(struct drm_i915_private *i915, u64 modifier) |
| { |
| return DISPLAY_VER(i915) >= 13 && modifier != DRM_FORMAT_MOD_LINEAR; |
| } |
| |
| bool intel_fb_uses_dpt(const struct drm_framebuffer *fb) |
| { |
| return fb && intel_modifier_uses_dpt(to_i915(fb->dev), fb->modifier); |
| } |
| |
| unsigned int intel_cursor_alignment(const struct drm_i915_private *i915) |
| { |
| if (IS_I830(i915)) |
| return 16 * 1024; |
| else if (IS_I85X(i915)) |
| return 256; |
| else if (IS_I845G(i915) || IS_I865G(i915)) |
| return 32; |
| else |
| return 4 * 1024; |
| } |
| |
| static unsigned int intel_linear_alignment(const struct drm_i915_private *dev_priv) |
| { |
| if (DISPLAY_VER(dev_priv) >= 9) |
| return 256 * 1024; |
| else if (IS_I965G(dev_priv) || IS_I965GM(dev_priv) || |
| IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| return 128 * 1024; |
| else if (DISPLAY_VER(dev_priv) >= 4) |
| return 4 * 1024; |
| else |
| return 0; |
| } |
| |
| unsigned int intel_surf_alignment(const struct drm_framebuffer *fb, |
| int color_plane) |
| { |
| struct drm_i915_private *dev_priv = to_i915(fb->dev); |
| |
| if (intel_fb_uses_dpt(fb)) |
| return 512 * 4096; |
| |
| /* AUX_DIST needs only 4K alignment */ |
| if (intel_fb_is_ccs_aux_plane(fb, color_plane)) |
| return 4096; |
| |
| if (is_semiplanar_uv_plane(fb, color_plane)) { |
| /* |
| * TODO: cross-check wrt. the bspec stride in bytes * 64 bytes |
| * alignment for linear UV planes on all platforms. |
| */ |
| if (DISPLAY_VER(dev_priv) >= 12) { |
| if (fb->modifier == DRM_FORMAT_MOD_LINEAR) |
| return intel_linear_alignment(dev_priv); |
| |
| return intel_tile_row_size(fb, color_plane); |
| } |
| |
| return 4096; |
| } |
| |
| drm_WARN_ON(&dev_priv->drm, color_plane != 0); |
| |
| switch (fb->modifier) { |
| case DRM_FORMAT_MOD_LINEAR: |
| return intel_linear_alignment(dev_priv); |
| case I915_FORMAT_MOD_X_TILED: |
| if (HAS_ASYNC_FLIPS(dev_priv)) |
| return 256 * 1024; |
| return 0; |
| case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS: |
| case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS: |
| case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC: |
| return 16 * 1024; |
| case I915_FORMAT_MOD_Y_TILED_CCS: |
| case I915_FORMAT_MOD_Yf_TILED_CCS: |
| case I915_FORMAT_MOD_Y_TILED: |
| case I915_FORMAT_MOD_Yf_TILED: |
| return 1 * 1024 * 1024; |
| default: |
| MISSING_CASE(fb->modifier); |
| return 0; |
| } |
| } |
| |
| void intel_fb_plane_get_subsampling(int *hsub, int *vsub, |
| const struct drm_framebuffer *fb, |
| int color_plane) |
| { |
| int main_plane; |
| |
| if (color_plane == 0) { |
| *hsub = 1; |
| *vsub = 1; |
| |
| return; |
| } |
| |
| /* |
| * TODO: Deduct the subsampling from the char block for all CCS |
| * formats and planes. |
| */ |
| if (!intel_fb_is_gen12_ccs_aux_plane(fb, color_plane)) { |
| *hsub = fb->format->hsub; |
| *vsub = fb->format->vsub; |
| |
| return; |
| } |
| |
| main_plane = skl_ccs_to_main_plane(fb, color_plane); |
| *hsub = drm_format_info_block_width(fb->format, color_plane) / |
| drm_format_info_block_width(fb->format, main_plane); |
| |
| /* |
| * The min stride check in the core framebuffer_check() function |
| * assumes that format->hsub applies to every plane except for the |
| * first plane. That's incorrect for the CCS AUX plane of the first |
| * plane, but for the above check to pass we must define the block |
| * width with that subsampling applied to it. Adjust the width here |
| * accordingly, so we can calculate the actual subsampling factor. |
| */ |
| if (main_plane == 0) |
| *hsub *= fb->format->hsub; |
| |
| *vsub = 32; |
| } |
| |
| static void intel_fb_plane_dims(const struct intel_framebuffer *fb, int color_plane, int *w, int *h) |
| { |
| int main_plane = intel_fb_is_ccs_aux_plane(&fb->base, color_plane) ? |
| skl_ccs_to_main_plane(&fb->base, color_plane) : 0; |
| unsigned int main_width = fb->base.width; |
| unsigned int main_height = fb->base.height; |
| int main_hsub, main_vsub; |
| int hsub, vsub; |
| |
| intel_fb_plane_get_subsampling(&main_hsub, &main_vsub, &fb->base, main_plane); |
| intel_fb_plane_get_subsampling(&hsub, &vsub, &fb->base, color_plane); |
| |
| *w = DIV_ROUND_UP(main_width, main_hsub * hsub); |
| *h = DIV_ROUND_UP(main_height, main_vsub * vsub); |
| } |
| |
| static u32 intel_adjust_tile_offset(int *x, int *y, |
| unsigned int tile_width, |
| unsigned int tile_height, |
| unsigned int tile_size, |
| unsigned int pitch_tiles, |
| u32 old_offset, |
| u32 new_offset) |
| { |
| unsigned int pitch_pixels = pitch_tiles * tile_width; |
| unsigned int tiles; |
| |
| WARN_ON(old_offset & (tile_size - 1)); |
| WARN_ON(new_offset & (tile_size - 1)); |
| WARN_ON(new_offset > old_offset); |
| |
| tiles = (old_offset - new_offset) / tile_size; |
| |
| *y += tiles / pitch_tiles * tile_height; |
| *x += tiles % pitch_tiles * tile_width; |
| |
| /* minimize x in case it got needlessly big */ |
| *y += *x / pitch_pixels * tile_height; |
| *x %= pitch_pixels; |
| |
| return new_offset; |
| } |
| |
| static u32 intel_adjust_linear_offset(int *x, int *y, |
| unsigned int cpp, |
| unsigned int pitch, |
| u32 old_offset, |
| u32 new_offset) |
| { |
| old_offset += *y * pitch + *x * cpp; |
| |
| *y = (old_offset - new_offset) / pitch; |
| *x = ((old_offset - new_offset) - *y * pitch) / cpp; |
| |
| return new_offset; |
| } |
| |
| static u32 intel_adjust_aligned_offset(int *x, int *y, |
| const struct drm_framebuffer *fb, |
| int color_plane, |
| unsigned int rotation, |
| unsigned int pitch, |
| u32 old_offset, u32 new_offset) |
| { |
| struct drm_i915_private *i915 = to_i915(fb->dev); |
| unsigned int cpp = fb->format->cpp[color_plane]; |
| |
| drm_WARN_ON(&i915->drm, new_offset > old_offset); |
| |
| if (!is_surface_linear(fb, color_plane)) { |
| unsigned int tile_size, tile_width, tile_height; |
| unsigned int pitch_tiles; |
| |
| tile_size = intel_tile_size(i915); |
| intel_tile_dims(fb, color_plane, &tile_width, &tile_height); |
| |
| if (drm_rotation_90_or_270(rotation)) { |
| pitch_tiles = pitch / tile_height; |
| swap(tile_width, tile_height); |
| } else { |
| pitch_tiles = pitch / (tile_width * cpp); |
| } |
| |
| intel_adjust_tile_offset(x, y, tile_width, tile_height, |
| tile_size, pitch_tiles, |
| old_offset, new_offset); |
| } else { |
| intel_adjust_linear_offset(x, y, cpp, pitch, |
| old_offset, new_offset); |
| } |
| |
| return new_offset; |
| } |
| |
| /* |
| * Adjust the tile offset by moving the difference into |
| * the x/y offsets. |
| */ |
| u32 intel_plane_adjust_aligned_offset(int *x, int *y, |
| const struct intel_plane_state *state, |
| int color_plane, |
| u32 old_offset, u32 new_offset) |
| { |
| return intel_adjust_aligned_offset(x, y, state->hw.fb, color_plane, |
| state->hw.rotation, |
| state->view.color_plane[color_plane].mapping_stride, |
| old_offset, new_offset); |
| } |
| |
| /* |
| * Computes the aligned offset to the base tile and adjusts |
| * x, y. bytes per pixel is assumed to be a power-of-two. |
| * |
| * In the 90/270 rotated case, x and y are assumed |
| * to be already rotated to match the rotated GTT view, and |
| * pitch is the tile_height aligned framebuffer height. |
| * |
| * This function is used when computing the derived information |
| * under intel_framebuffer, so using any of that information |
| * here is not allowed. Anything under drm_framebuffer can be |
| * used. This is why the user has to pass in the pitch since it |
| * is specified in the rotated orientation. |
| */ |
| static u32 intel_compute_aligned_offset(struct drm_i915_private *i915, |
| int *x, int *y, |
| const struct drm_framebuffer *fb, |
| int color_plane, |
| unsigned int pitch, |
| unsigned int rotation, |
| u32 alignment) |
| { |
| unsigned int cpp = fb->format->cpp[color_plane]; |
| u32 offset, offset_aligned; |
| |
| if (!is_surface_linear(fb, color_plane)) { |
| unsigned int tile_size, tile_width, tile_height; |
| unsigned int tile_rows, tiles, pitch_tiles; |
| |
| tile_size = intel_tile_size(i915); |
| intel_tile_dims(fb, color_plane, &tile_width, &tile_height); |
| |
| if (drm_rotation_90_or_270(rotation)) { |
| pitch_tiles = pitch / tile_height; |
| swap(tile_width, tile_height); |
| } else { |
| pitch_tiles = pitch / (tile_width * cpp); |
| } |
| |
| tile_rows = *y / tile_height; |
| *y %= tile_height; |
| |
| tiles = *x / tile_width; |
| *x %= tile_width; |
| |
| offset = (tile_rows * pitch_tiles + tiles) * tile_size; |
| |
| offset_aligned = offset; |
| if (alignment) |
| offset_aligned = rounddown(offset_aligned, alignment); |
| |
| intel_adjust_tile_offset(x, y, tile_width, tile_height, |
| tile_size, pitch_tiles, |
| offset, offset_aligned); |
| } else { |
| offset = *y * pitch + *x * cpp; |
| offset_aligned = offset; |
| if (alignment) { |
| offset_aligned = rounddown(offset_aligned, alignment); |
| *y = (offset % alignment) / pitch; |
| *x = ((offset % alignment) - *y * pitch) / cpp; |
| } else { |
| *y = *x = 0; |
| } |
| } |
| |
| return offset_aligned; |
| } |
| |
| u32 intel_plane_compute_aligned_offset(int *x, int *y, |
| const struct intel_plane_state *state, |
| int color_plane) |
| { |
| struct intel_plane *intel_plane = to_intel_plane(state->uapi.plane); |
| struct drm_i915_private *i915 = to_i915(intel_plane->base.dev); |
| const struct drm_framebuffer *fb = state->hw.fb; |
| unsigned int rotation = state->hw.rotation; |
| int pitch = state->view.color_plane[color_plane].mapping_stride; |
| u32 alignment; |
| |
| if (intel_plane->id == PLANE_CURSOR) |
| alignment = intel_cursor_alignment(i915); |
| else |
| alignment = intel_surf_alignment(fb, color_plane); |
| |
| return intel_compute_aligned_offset(i915, x, y, fb, color_plane, |
| pitch, rotation, alignment); |
| } |
| |
| /* Convert the fb->offset[] into x/y offsets */ |
| static int intel_fb_offset_to_xy(int *x, int *y, |
| const struct drm_framebuffer *fb, |
| int color_plane) |
| { |
| struct drm_i915_private *i915 = to_i915(fb->dev); |
| unsigned int height; |
| u32 alignment; |
| |
| if (DISPLAY_VER(i915) >= 12 && |
| !intel_fb_needs_pot_stride_remap(to_intel_framebuffer(fb)) && |
| is_semiplanar_uv_plane(fb, color_plane)) |
| alignment = intel_tile_row_size(fb, color_plane); |
| else if (fb->modifier != DRM_FORMAT_MOD_LINEAR) |
| alignment = intel_tile_size(i915); |
| else |
| alignment = 0; |
| |
| if (alignment != 0 && fb->offsets[color_plane] % alignment) { |
| drm_dbg_kms(&i915->drm, |
| "Misaligned offset 0x%08x for color plane %d\n", |
| fb->offsets[color_plane], color_plane); |
| return -EINVAL; |
| } |
| |
| height = drm_framebuffer_plane_height(fb->height, fb, color_plane); |
| height = ALIGN(height, intel_tile_height(fb, color_plane)); |
| |
| /* Catch potential overflows early */ |
| if (add_overflows_t(u32, mul_u32_u32(height, fb->pitches[color_plane]), |
| fb->offsets[color_plane])) { |
| drm_dbg_kms(&i915->drm, |
| "Bad offset 0x%08x or pitch %d for color plane %d\n", |
| fb->offsets[color_plane], fb->pitches[color_plane], |
| color_plane); |
| return -ERANGE; |
| } |
| |
| *x = 0; |
| *y = 0; |
| |
| intel_adjust_aligned_offset(x, y, |
| fb, color_plane, DRM_MODE_ROTATE_0, |
| fb->pitches[color_plane], |
| fb->offsets[color_plane], 0); |
| |
| return 0; |
| } |
| |
| static int intel_fb_check_ccs_xy(const struct drm_framebuffer *fb, int ccs_plane, int x, int y) |
| { |
| struct drm_i915_private *i915 = to_i915(fb->dev); |
| const struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); |
| int main_plane; |
| int hsub, vsub; |
| int tile_width, tile_height; |
| int ccs_x, ccs_y; |
| int main_x, main_y; |
| |
| if (!intel_fb_is_ccs_aux_plane(fb, ccs_plane)) |
| return 0; |
| |
| /* |
| * While all the tile dimensions are based on a 2k or 4k GTT page size |
| * here the main and CCS coordinates must match only within a (64 byte |
| * on TGL+) block inside the tile. |
| */ |
| intel_tile_block_dims(fb, ccs_plane, &tile_width, &tile_height); |
| intel_fb_plane_get_subsampling(&hsub, &vsub, fb, ccs_plane); |
| |
| tile_width *= hsub; |
| tile_height *= vsub; |
| |
| ccs_x = (x * hsub) % tile_width; |
| ccs_y = (y * vsub) % tile_height; |
| |
| main_plane = skl_ccs_to_main_plane(fb, ccs_plane); |
| main_x = intel_fb->normal_view.color_plane[main_plane].x % tile_width; |
| main_y = intel_fb->normal_view.color_plane[main_plane].y % tile_height; |
| |
| /* |
| * CCS doesn't have its own x/y offset register, so the intra CCS tile |
| * x/y offsets must match between CCS and the main surface. |
| */ |
| if (main_x != ccs_x || main_y != ccs_y) { |
| drm_dbg_kms(&i915->drm, |
| "Bad CCS x/y (main %d,%d ccs %d,%d) full (main %d,%d ccs %d,%d)\n", |
| main_x, main_y, |
| ccs_x, ccs_y, |
| intel_fb->normal_view.color_plane[main_plane].x, |
| intel_fb->normal_view.color_plane[main_plane].y, |
| x, y); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static bool intel_plane_can_remap(const struct intel_plane_state *plane_state) |
| { |
| struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane); |
| struct drm_i915_private *i915 = to_i915(plane->base.dev); |
| const struct drm_framebuffer *fb = plane_state->hw.fb; |
| int i; |
| |
| /* We don't want to deal with remapping with cursors */ |
| if (plane->id == PLANE_CURSOR) |
| return false; |
| |
| /* |
| * The display engine limits already match/exceed the |
| * render engine limits, so not much point in remapping. |
| * Would also need to deal with the fence POT alignment |
| * and gen2 2KiB GTT tile size. |
| */ |
| if (DISPLAY_VER(i915) < 4) |
| return false; |
| |
| /* |
| * The new CCS hash mode isn't compatible with remapping as |
| * the virtual address of the pages affects the compressed data. |
| */ |
| if (intel_fb_is_ccs_modifier(fb->modifier)) |
| return false; |
| |
| /* Linear needs a page aligned stride for remapping */ |
| if (fb->modifier == DRM_FORMAT_MOD_LINEAR) { |
| unsigned int alignment = intel_tile_size(i915) - 1; |
| |
| for (i = 0; i < fb->format->num_planes; i++) { |
| if (fb->pitches[i] & alignment) |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| bool intel_fb_needs_pot_stride_remap(const struct intel_framebuffer *fb) |
| { |
| struct drm_i915_private *i915 = to_i915(fb->base.dev); |
| |
| return IS_ALDERLAKE_P(i915) && fb->base.modifier != DRM_FORMAT_MOD_LINEAR; |
| } |
| |
| static int intel_fb_pitch(const struct intel_framebuffer *fb, int color_plane, unsigned int rotation) |
| { |
| if (drm_rotation_90_or_270(rotation)) |
| return fb->rotated_view.color_plane[color_plane].mapping_stride; |
| else if (intel_fb_needs_pot_stride_remap(fb)) |
| return fb->remapped_view.color_plane[color_plane].mapping_stride; |
| else |
| return fb->normal_view.color_plane[color_plane].mapping_stride; |
| } |
| |
| static bool intel_plane_needs_remap(const struct intel_plane_state *plane_state) |
| { |
| struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane); |
| const struct intel_framebuffer *fb = to_intel_framebuffer(plane_state->hw.fb); |
| unsigned int rotation = plane_state->hw.rotation; |
| u32 stride, max_stride; |
| |
| /* |
| * No remapping for invisible planes since we don't have |
| * an actual source viewport to remap. |
| */ |
| if (!plane_state->uapi.visible) |
| return false; |
| |
| if (!intel_plane_can_remap(plane_state)) |
| return false; |
| |
| /* |
| * FIXME: aux plane limits on gen9+ are |
| * unclear in Bspec, for now no checking. |
| */ |
| stride = intel_fb_pitch(fb, 0, rotation); |
| max_stride = plane->max_stride(plane, fb->base.format->format, |
| fb->base.modifier, rotation); |
| |
| return stride > max_stride; |
| } |
| |
| static int convert_plane_offset_to_xy(const struct intel_framebuffer *fb, int color_plane, |
| int plane_width, int *x, int *y) |
| { |
| struct drm_i915_gem_object *obj = intel_fb_obj(&fb->base); |
| int ret; |
| |
| ret = intel_fb_offset_to_xy(x, y, &fb->base, color_plane); |
| if (ret) { |
| drm_dbg_kms(fb->base.dev, |
| "bad fb plane %d offset: 0x%x\n", |
| color_plane, fb->base.offsets[color_plane]); |
| return ret; |
| } |
| |
| ret = intel_fb_check_ccs_xy(&fb->base, color_plane, *x, *y); |
| if (ret) |
| return ret; |
| |
| /* |
| * The fence (if used) is aligned to the start of the object |
| * so having the framebuffer wrap around across the edge of the |
| * fenced region doesn't really work. We have no API to configure |
| * the fence start offset within the object (nor could we probably |
| * on gen2/3). So it's just easier if we just require that the |
| * fb layout agrees with the fence layout. We already check that the |
| * fb stride matches the fence stride elsewhere. |
| */ |
| if (color_plane == 0 && i915_gem_object_is_tiled(obj) && |
| (*x + plane_width) * fb->base.format->cpp[color_plane] > fb->base.pitches[color_plane]) { |
| drm_dbg_kms(fb->base.dev, |
| "bad fb plane %d offset: 0x%x\n", |
| color_plane, fb->base.offsets[color_plane]); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static u32 calc_plane_aligned_offset(const struct intel_framebuffer *fb, int color_plane, int *x, int *y) |
| { |
| struct drm_i915_private *i915 = to_i915(fb->base.dev); |
| unsigned int tile_size = intel_tile_size(i915); |
| u32 offset; |
| |
| offset = intel_compute_aligned_offset(i915, x, y, &fb->base, color_plane, |
| fb->base.pitches[color_plane], |
| DRM_MODE_ROTATE_0, |
| tile_size); |
| |
| return offset / tile_size; |
| } |
| |
| struct fb_plane_view_dims { |
| unsigned int width, height; |
| unsigned int tile_width, tile_height; |
| }; |
| |
| static void init_plane_view_dims(const struct intel_framebuffer *fb, int color_plane, |
| unsigned int width, unsigned int height, |
| struct fb_plane_view_dims *dims) |
| { |
| dims->width = width; |
| dims->height = height; |
| |
| intel_tile_dims(&fb->base, color_plane, &dims->tile_width, &dims->tile_height); |
| } |
| |
| static unsigned int |
| plane_view_src_stride_tiles(const struct intel_framebuffer *fb, int color_plane, |
| const struct fb_plane_view_dims *dims) |
| { |
| return DIV_ROUND_UP(fb->base.pitches[color_plane], |
| dims->tile_width * fb->base.format->cpp[color_plane]); |
| } |
| |
| static unsigned int |
| plane_view_dst_stride_tiles(const struct intel_framebuffer *fb, int color_plane, |
| unsigned int pitch_tiles) |
| { |
| if (intel_fb_needs_pot_stride_remap(fb)) { |
| /* |
| * ADL_P, the only platform needing a POT stride has a minimum |
| * of 8 main surface tiles. |
| */ |
| return roundup_pow_of_two(max(pitch_tiles, 8u)); |
| } else { |
| return pitch_tiles; |
| } |
| } |
| |
| static unsigned int |
| plane_view_scanout_stride(const struct intel_framebuffer *fb, int color_plane, |
| unsigned int tile_width, |
| unsigned int src_stride_tiles, unsigned int dst_stride_tiles) |
| { |
| unsigned int stride_tiles; |
| |
| if (IS_ALDERLAKE_P(to_i915(fb->base.dev))) |
| stride_tiles = src_stride_tiles; |
| else |
| stride_tiles = dst_stride_tiles; |
| |
| return stride_tiles * tile_width * fb->base.format->cpp[color_plane]; |
| } |
| |
| static unsigned int |
| plane_view_width_tiles(const struct intel_framebuffer *fb, int color_plane, |
| const struct fb_plane_view_dims *dims, |
| int x) |
| { |
| return DIV_ROUND_UP(x + dims->width, dims->tile_width); |
| } |
| |
| static unsigned int |
| plane_view_height_tiles(const struct intel_framebuffer *fb, int color_plane, |
| const struct fb_plane_view_dims *dims, |
| int y) |
| { |
| return DIV_ROUND_UP(y + dims->height, dims->tile_height); |
| } |
| |
| static unsigned int |
| plane_view_linear_tiles(const struct intel_framebuffer *fb, int color_plane, |
| const struct fb_plane_view_dims *dims, |
| int x, int y) |
| { |
| struct drm_i915_private *i915 = to_i915(fb->base.dev); |
| unsigned int size; |
| |
| size = (y + dims->height) * fb->base.pitches[color_plane] + |
| x * fb->base.format->cpp[color_plane]; |
| |
| return DIV_ROUND_UP(size, intel_tile_size(i915)); |
| } |
| |
| #define assign_chk_ovf(i915, var, val) ({ \ |
| drm_WARN_ON(&(i915)->drm, overflows_type(val, var)); \ |
| (var) = (val); \ |
| }) |
| |
| #define assign_bfld_chk_ovf(i915, var, val) ({ \ |
| (var) = (val); \ |
| drm_WARN_ON(&(i915)->drm, (var) != (val)); \ |
| (var); \ |
| }) |
| |
| static u32 calc_plane_remap_info(const struct intel_framebuffer *fb, int color_plane, |
| const struct fb_plane_view_dims *dims, |
| u32 obj_offset, u32 gtt_offset, int x, int y, |
| struct intel_fb_view *view) |
| { |
| struct drm_i915_private *i915 = to_i915(fb->base.dev); |
| struct intel_remapped_plane_info *remap_info = &view->gtt.remapped.plane[color_plane]; |
| struct i915_color_plane_view *color_plane_info = &view->color_plane[color_plane]; |
| unsigned int tile_width = dims->tile_width; |
| unsigned int tile_height = dims->tile_height; |
| unsigned int tile_size = intel_tile_size(i915); |
| struct drm_rect r; |
| u32 size = 0; |
| |
| assign_bfld_chk_ovf(i915, remap_info->offset, obj_offset); |
| |
| if (intel_fb_is_gen12_ccs_aux_plane(&fb->base, color_plane)) { |
| remap_info->linear = 1; |
| |
| assign_chk_ovf(i915, remap_info->size, |
| plane_view_linear_tiles(fb, color_plane, dims, x, y)); |
| } else { |
| remap_info->linear = 0; |
| |
| assign_chk_ovf(i915, remap_info->src_stride, |
| plane_view_src_stride_tiles(fb, color_plane, dims)); |
| assign_chk_ovf(i915, remap_info->width, |
| plane_view_width_tiles(fb, color_plane, dims, x)); |
| assign_chk_ovf(i915, remap_info->height, |
| plane_view_height_tiles(fb, color_plane, dims, y)); |
| } |
| |
| if (view->gtt.type == I915_GGTT_VIEW_ROTATED) { |
| drm_WARN_ON(&i915->drm, remap_info->linear); |
| check_array_bounds(i915, view->gtt.rotated.plane, color_plane); |
| |
| assign_chk_ovf(i915, remap_info->dst_stride, |
| plane_view_dst_stride_tiles(fb, color_plane, remap_info->height)); |
| |
| /* rotate the x/y offsets to match the GTT view */ |
| drm_rect_init(&r, x, y, dims->width, dims->height); |
| drm_rect_rotate(&r, |
| remap_info->width * tile_width, |
| remap_info->height * tile_height, |
| DRM_MODE_ROTATE_270); |
| |
| color_plane_info->x = r.x1; |
| color_plane_info->y = r.y1; |
| |
| color_plane_info->mapping_stride = remap_info->dst_stride * tile_height; |
| color_plane_info->scanout_stride = color_plane_info->mapping_stride; |
| |
| size += remap_info->dst_stride * remap_info->width; |
| |
| /* rotate the tile dimensions to match the GTT view */ |
| swap(tile_width, tile_height); |
| } else { |
| drm_WARN_ON(&i915->drm, view->gtt.type != I915_GGTT_VIEW_REMAPPED); |
| |
| check_array_bounds(i915, view->gtt.remapped.plane, color_plane); |
| |
| if (view->gtt.remapped.plane_alignment) { |
| unsigned int aligned_offset = ALIGN(gtt_offset, |
| view->gtt.remapped.plane_alignment); |
| |
| size += aligned_offset - gtt_offset; |
| gtt_offset = aligned_offset; |
| } |
| |
| color_plane_info->x = x; |
| color_plane_info->y = y; |
| |
| if (remap_info->linear) { |
| color_plane_info->mapping_stride = fb->base.pitches[color_plane]; |
| color_plane_info->scanout_stride = color_plane_info->mapping_stride; |
| |
| size += remap_info->size; |
| } else { |
| unsigned int dst_stride = plane_view_dst_stride_tiles(fb, color_plane, |
| remap_info->width); |
| |
| assign_chk_ovf(i915, remap_info->dst_stride, dst_stride); |
| color_plane_info->mapping_stride = dst_stride * |
| tile_width * |
| fb->base.format->cpp[color_plane]; |
| color_plane_info->scanout_stride = |
| plane_view_scanout_stride(fb, color_plane, tile_width, |
| remap_info->src_stride, |
| dst_stride); |
| |
| size += dst_stride * remap_info->height; |
| } |
| } |
| |
| /* |
| * We only keep the x/y offsets, so push all of the gtt offset into |
| * the x/y offsets. x,y will hold the first pixel of the framebuffer |
| * plane from the start of the remapped/rotated gtt mapping. |
| */ |
| if (remap_info->linear) |
| intel_adjust_linear_offset(&color_plane_info->x, &color_plane_info->y, |
| fb->base.format->cpp[color_plane], |
| color_plane_info->mapping_stride, |
| gtt_offset * tile_size, 0); |
| else |
| intel_adjust_tile_offset(&color_plane_info->x, &color_plane_info->y, |
| tile_width, tile_height, |
| tile_size, remap_info->dst_stride, |
| gtt_offset * tile_size, 0); |
| |
| return size; |
| } |
| |
| #undef assign_chk_ovf |
| |
| /* Return number of tiles @color_plane needs. */ |
| static unsigned int |
| calc_plane_normal_size(const struct intel_framebuffer *fb, int color_plane, |
| const struct fb_plane_view_dims *dims, |
| int x, int y) |
| { |
| unsigned int tiles; |
| |
| if (is_surface_linear(&fb->base, color_plane)) { |
| tiles = plane_view_linear_tiles(fb, color_plane, dims, x, y); |
| } else { |
| tiles = plane_view_src_stride_tiles(fb, color_plane, dims) * |
| plane_view_height_tiles(fb, color_plane, dims, y); |
| /* |
| * If the plane isn't horizontally tile aligned, |
| * we need one more tile. |
| */ |
| if (x != 0) |
| tiles++; |
| } |
| |
| return tiles; |
| } |
| |
| static void intel_fb_view_init(struct drm_i915_private *i915, struct intel_fb_view *view, |
| enum i915_ggtt_view_type view_type) |
| { |
| memset(view, 0, sizeof(*view)); |
| view->gtt.type = view_type; |
| |
| if (view_type == I915_GGTT_VIEW_REMAPPED && IS_ALDERLAKE_P(i915)) |
| view->gtt.remapped.plane_alignment = SZ_2M / PAGE_SIZE; |
| } |
| |
| bool intel_fb_supports_90_270_rotation(const struct intel_framebuffer *fb) |
| { |
| if (DISPLAY_VER(to_i915(fb->base.dev)) >= 13) |
| return false; |
| |
| return fb->base.modifier == I915_FORMAT_MOD_Y_TILED || |
| fb->base.modifier == I915_FORMAT_MOD_Yf_TILED; |
| } |
| |
| int intel_fill_fb_info(struct drm_i915_private *i915, struct intel_framebuffer *fb) |
| { |
| struct drm_i915_gem_object *obj = intel_fb_obj(&fb->base); |
| u32 gtt_offset_rotated = 0; |
| u32 gtt_offset_remapped = 0; |
| unsigned int max_size = 0; |
| int i, num_planes = fb->base.format->num_planes; |
| unsigned int tile_size = intel_tile_size(i915); |
| |
| intel_fb_view_init(i915, &fb->normal_view, I915_GGTT_VIEW_NORMAL); |
| |
| drm_WARN_ON(&i915->drm, |
| intel_fb_supports_90_270_rotation(fb) && |
| intel_fb_needs_pot_stride_remap(fb)); |
| |
| if (intel_fb_supports_90_270_rotation(fb)) |
| intel_fb_view_init(i915, &fb->rotated_view, I915_GGTT_VIEW_ROTATED); |
| if (intel_fb_needs_pot_stride_remap(fb)) |
| intel_fb_view_init(i915, &fb->remapped_view, I915_GGTT_VIEW_REMAPPED); |
| |
| for (i = 0; i < num_planes; i++) { |
| struct fb_plane_view_dims view_dims; |
| unsigned int width, height; |
| unsigned int cpp, size; |
| u32 offset; |
| int x, y; |
| int ret; |
| |
| /* |
| * Plane 2 of Render Compression with Clear Color fb modifier |
| * is consumed by the driver and not passed to DE. Skip the |
| * arithmetic related to alignment and offset calculation. |
| */ |
| if (is_gen12_ccs_cc_plane(&fb->base, i)) { |
| if (IS_ALIGNED(fb->base.offsets[i], PAGE_SIZE)) |
| continue; |
| else |
| return -EINVAL; |
| } |
| |
| cpp = fb->base.format->cpp[i]; |
| intel_fb_plane_dims(fb, i, &width, &height); |
| |
| ret = convert_plane_offset_to_xy(fb, i, width, &x, &y); |
| if (ret) |
| return ret; |
| |
| init_plane_view_dims(fb, i, width, height, &view_dims); |
| |
| /* |
| * First pixel of the framebuffer from |
| * the start of the normal gtt mapping. |
| */ |
| fb->normal_view.color_plane[i].x = x; |
| fb->normal_view.color_plane[i].y = y; |
| fb->normal_view.color_plane[i].mapping_stride = fb->base.pitches[i]; |
| fb->normal_view.color_plane[i].scanout_stride = |
| fb->normal_view.color_plane[i].mapping_stride; |
| |
| offset = calc_plane_aligned_offset(fb, i, &x, &y); |
| |
| if (intel_fb_supports_90_270_rotation(fb)) |
| gtt_offset_rotated += calc_plane_remap_info(fb, i, &view_dims, |
| offset, gtt_offset_rotated, x, y, |
| &fb->rotated_view); |
| |
| if (intel_fb_needs_pot_stride_remap(fb)) |
| gtt_offset_remapped += calc_plane_remap_info(fb, i, &view_dims, |
| offset, gtt_offset_remapped, x, y, |
| &fb->remapped_view); |
| |
| size = calc_plane_normal_size(fb, i, &view_dims, x, y); |
| /* how many tiles in total needed in the bo */ |
| max_size = max(max_size, offset + size); |
| } |
| |
| if (mul_u32_u32(max_size, tile_size) > obj->base.size) { |
| drm_dbg_kms(&i915->drm, |
| "fb too big for bo (need %llu bytes, have %zu bytes)\n", |
| mul_u32_u32(max_size, tile_size), obj->base.size); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void intel_plane_remap_gtt(struct intel_plane_state *plane_state) |
| { |
| struct drm_i915_private *i915 = |
| to_i915(plane_state->uapi.plane->dev); |
| struct drm_framebuffer *fb = plane_state->hw.fb; |
| struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); |
| unsigned int rotation = plane_state->hw.rotation; |
| int i, num_planes = fb->format->num_planes; |
| unsigned int src_x, src_y; |
| unsigned int src_w, src_h; |
| u32 gtt_offset = 0; |
| |
| intel_fb_view_init(i915, &plane_state->view, |
| drm_rotation_90_or_270(rotation) ? I915_GGTT_VIEW_ROTATED : |
| I915_GGTT_VIEW_REMAPPED); |
| |
| src_x = plane_state->uapi.src.x1 >> 16; |
| src_y = plane_state->uapi.src.y1 >> 16; |
| src_w = drm_rect_width(&plane_state->uapi.src) >> 16; |
| src_h = drm_rect_height(&plane_state->uapi.src) >> 16; |
| |
| drm_WARN_ON(&i915->drm, intel_fb_is_ccs_modifier(fb->modifier)); |
| |
| /* Make src coordinates relative to the viewport */ |
| drm_rect_translate(&plane_state->uapi.src, |
| -(src_x << 16), -(src_y << 16)); |
| |
| /* Rotate src coordinates to match rotated GTT view */ |
| if (drm_rotation_90_or_270(rotation)) |
| drm_rect_rotate(&plane_state->uapi.src, |
| src_w << 16, src_h << 16, |
| DRM_MODE_ROTATE_270); |
| |
| for (i = 0; i < num_planes; i++) { |
| unsigned int hsub = i ? fb->format->hsub : 1; |
| unsigned int vsub = i ? fb->format->vsub : 1; |
| struct fb_plane_view_dims view_dims; |
| unsigned int width, height; |
| unsigned int x, y; |
| u32 offset; |
| |
| x = src_x / hsub; |
| y = src_y / vsub; |
| width = src_w / hsub; |
| height = src_h / vsub; |
| |
| init_plane_view_dims(intel_fb, i, width, height, &view_dims); |
| |
| /* |
| * First pixel of the src viewport from the |
| * start of the normal gtt mapping. |
| */ |
| x += intel_fb->normal_view.color_plane[i].x; |
| y += intel_fb->normal_view.color_plane[i].y; |
| |
| offset = calc_plane_aligned_offset(intel_fb, i, &x, &y); |
| |
| gtt_offset += calc_plane_remap_info(intel_fb, i, &view_dims, |
| offset, gtt_offset, x, y, |
| &plane_state->view); |
| } |
| } |
| |
| void intel_fb_fill_view(const struct intel_framebuffer *fb, unsigned int rotation, |
| struct intel_fb_view *view) |
| { |
| if (drm_rotation_90_or_270(rotation)) |
| *view = fb->rotated_view; |
| else if (intel_fb_needs_pot_stride_remap(fb)) |
| *view = fb->remapped_view; |
| else |
| *view = fb->normal_view; |
| } |
| |
| static |
| u32 intel_fb_max_stride(struct drm_i915_private *dev_priv, |
| u32 pixel_format, u64 modifier) |
| { |
| /* |
| * Arbitrary limit for gen4+ chosen to match the |
| * render engine max stride. |
| * |
| * The new CCS hash mode makes remapping impossible |
| */ |
| if (DISPLAY_VER(dev_priv) < 4 || intel_fb_is_ccs_modifier(modifier) || |
| intel_modifier_uses_dpt(dev_priv, modifier)) |
| return intel_plane_fb_max_stride(dev_priv, pixel_format, modifier); |
| else if (DISPLAY_VER(dev_priv) >= 7) |
| return 256 * 1024; |
| else |
| return 128 * 1024; |
| } |
| |
| static u32 |
| intel_fb_stride_alignment(const struct drm_framebuffer *fb, int color_plane) |
| { |
| struct drm_i915_private *dev_priv = to_i915(fb->dev); |
| u32 tile_width; |
| |
| if (is_surface_linear(fb, color_plane)) { |
| u32 max_stride = intel_plane_fb_max_stride(dev_priv, |
| fb->format->format, |
| fb->modifier); |
| |
| /* |
| * To make remapping with linear generally feasible |
| * we need the stride to be page aligned. |
| */ |
| if (fb->pitches[color_plane] > max_stride && |
| !intel_fb_is_ccs_modifier(fb->modifier)) |
| return intel_tile_size(dev_priv); |
| else |
| return 64; |
| } |
| |
| tile_width = intel_tile_width_bytes(fb, color_plane); |
| if (intel_fb_is_ccs_modifier(fb->modifier)) { |
| /* |
| * On TGL the surface stride must be 4 tile aligned, mapped by |
| * one 64 byte cacheline on the CCS AUX surface. |
| */ |
| if (DISPLAY_VER(dev_priv) >= 12) |
| tile_width *= 4; |
| /* |
| * Display WA #0531: skl,bxt,kbl,glk |
| * |
| * Render decompression and plane width > 3840 |
| * combined with horizontal panning requires the |
| * plane stride to be a multiple of 4. We'll just |
| * require the entire fb to accommodate that to avoid |
| * potential runtime errors at plane configuration time. |
| */ |
| else if ((DISPLAY_VER(dev_priv) == 9 || IS_GEMINILAKE(dev_priv)) && |
| color_plane == 0 && fb->width > 3840) |
| tile_width *= 4; |
| } |
| return tile_width; |
| } |
| |
| static int intel_plane_check_stride(const struct intel_plane_state *plane_state) |
| { |
| struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane); |
| const struct drm_framebuffer *fb = plane_state->hw.fb; |
| unsigned int rotation = plane_state->hw.rotation; |
| u32 stride, max_stride; |
| |
| /* |
| * We ignore stride for all invisible planes that |
| * can be remapped. Otherwise we could end up |
| * with a false positive when the remapping didn't |
| * kick in due the plane being invisible. |
| */ |
| if (intel_plane_can_remap(plane_state) && |
| !plane_state->uapi.visible) |
| return 0; |
| |
| /* FIXME other color planes? */ |
| stride = plane_state->view.color_plane[0].mapping_stride; |
| max_stride = plane->max_stride(plane, fb->format->format, |
| fb->modifier, rotation); |
| |
| if (stride > max_stride) { |
| DRM_DEBUG_KMS("[FB:%d] stride (%d) exceeds [PLANE:%d:%s] max stride (%d)\n", |
| fb->base.id, stride, |
| plane->base.base.id, plane->base.name, max_stride); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| int intel_plane_compute_gtt(struct intel_plane_state *plane_state) |
| { |
| const struct intel_framebuffer *fb = |
| to_intel_framebuffer(plane_state->hw.fb); |
| unsigned int rotation = plane_state->hw.rotation; |
| |
| if (!fb) |
| return 0; |
| |
| if (intel_plane_needs_remap(plane_state)) { |
| intel_plane_remap_gtt(plane_state); |
| |
| /* |
| * Sometimes even remapping can't overcome |
| * the stride limitations :( Can happen with |
| * big plane sizes and suitably misaligned |
| * offsets. |
| */ |
| return intel_plane_check_stride(plane_state); |
| } |
| |
| intel_fb_fill_view(fb, rotation, &plane_state->view); |
| |
| /* Rotate src coordinates to match rotated GTT view */ |
| if (drm_rotation_90_or_270(rotation)) |
| drm_rect_rotate(&plane_state->uapi.src, |
| fb->base.width << 16, fb->base.height << 16, |
| DRM_MODE_ROTATE_270); |
| |
| return intel_plane_check_stride(plane_state); |
| } |
| |
| static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb) |
| { |
| struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); |
| |
| drm_framebuffer_cleanup(fb); |
| |
| if (intel_fb_uses_dpt(fb)) |
| intel_dpt_destroy(intel_fb->dpt_vm); |
| |
| intel_frontbuffer_put(intel_fb->frontbuffer); |
| |
| kfree(intel_fb); |
| } |
| |
| static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb, |
| struct drm_file *file, |
| unsigned int *handle) |
| { |
| struct drm_i915_gem_object *obj = intel_fb_obj(fb); |
| struct drm_i915_private *i915 = to_i915(obj->base.dev); |
| |
| if (i915_gem_object_is_userptr(obj)) { |
| drm_dbg(&i915->drm, |
| "attempting to use a userptr for a framebuffer, denied\n"); |
| return -EINVAL; |
| } |
| |
| return drm_gem_handle_create(file, &obj->base, handle); |
| } |
| |
| static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb, |
| struct drm_file *file, |
| unsigned int flags, unsigned int color, |
| struct drm_clip_rect *clips, |
| unsigned int num_clips) |
| { |
| struct drm_i915_gem_object *obj = intel_fb_obj(fb); |
| |
| i915_gem_object_flush_if_display(obj); |
| intel_frontbuffer_flush(to_intel_frontbuffer(fb), ORIGIN_DIRTYFB); |
| |
| return 0; |
| } |
| |
| static const struct drm_framebuffer_funcs intel_fb_funcs = { |
| .destroy = intel_user_framebuffer_destroy, |
| .create_handle = intel_user_framebuffer_create_handle, |
| .dirty = intel_user_framebuffer_dirty, |
| }; |
| |
| int intel_framebuffer_init(struct intel_framebuffer *intel_fb, |
| struct drm_i915_gem_object *obj, |
| struct drm_mode_fb_cmd2 *mode_cmd) |
| { |
| struct drm_i915_private *dev_priv = to_i915(obj->base.dev); |
| struct drm_framebuffer *fb = &intel_fb->base; |
| u32 max_stride; |
| unsigned int tiling, stride; |
| int ret = -EINVAL; |
| int i; |
| |
| intel_fb->frontbuffer = intel_frontbuffer_get(obj); |
| if (!intel_fb->frontbuffer) |
| return -ENOMEM; |
| |
| i915_gem_object_lock(obj, NULL); |
| tiling = i915_gem_object_get_tiling(obj); |
| stride = i915_gem_object_get_stride(obj); |
| i915_gem_object_unlock(obj); |
| |
| if (mode_cmd->flags & DRM_MODE_FB_MODIFIERS) { |
| /* |
| * If there's a fence, enforce that |
| * the fb modifier and tiling mode match. |
| */ |
| if (tiling != I915_TILING_NONE && |
| tiling != intel_fb_modifier_to_tiling(mode_cmd->modifier[0])) { |
| drm_dbg_kms(&dev_priv->drm, |
| "tiling_mode doesn't match fb modifier\n"); |
| goto err; |
| } |
| } else { |
| if (tiling == I915_TILING_X) { |
| mode_cmd->modifier[0] = I915_FORMAT_MOD_X_TILED; |
| } else if (tiling == I915_TILING_Y) { |
| drm_dbg_kms(&dev_priv->drm, |
| "No Y tiling for legacy addfb\n"); |
| goto err; |
| } |
| } |
| |
| if (!drm_any_plane_has_format(&dev_priv->drm, |
| mode_cmd->pixel_format, |
| mode_cmd->modifier[0])) { |
| drm_dbg_kms(&dev_priv->drm, |
| "unsupported pixel format %p4cc / modifier 0x%llx\n", |
| &mode_cmd->pixel_format, mode_cmd->modifier[0]); |
| goto err; |
| } |
| |
| /* |
| * gen2/3 display engine uses the fence if present, |
| * so the tiling mode must match the fb modifier exactly. |
| */ |
| if (DISPLAY_VER(dev_priv) < 4 && |
| tiling != intel_fb_modifier_to_tiling(mode_cmd->modifier[0])) { |
| drm_dbg_kms(&dev_priv->drm, |
| "tiling_mode must match fb modifier exactly on gen2/3\n"); |
| goto err; |
| } |
| |
| max_stride = intel_fb_max_stride(dev_priv, mode_cmd->pixel_format, |
| mode_cmd->modifier[0]); |
| if (mode_cmd->pitches[0] > max_stride) { |
| drm_dbg_kms(&dev_priv->drm, |
| "%s pitch (%u) must be at most %d\n", |
| mode_cmd->modifier[0] != DRM_FORMAT_MOD_LINEAR ? |
| "tiled" : "linear", |
| mode_cmd->pitches[0], max_stride); |
| goto err; |
| } |
| |
| /* |
| * If there's a fence, enforce that |
| * the fb pitch and fence stride match. |
| */ |
| if (tiling != I915_TILING_NONE && mode_cmd->pitches[0] != stride) { |
| drm_dbg_kms(&dev_priv->drm, |
| "pitch (%d) must match tiling stride (%d)\n", |
| mode_cmd->pitches[0], stride); |
| goto err; |
| } |
| |
| /* FIXME need to adjust LINOFF/TILEOFF accordingly. */ |
| if (mode_cmd->offsets[0] != 0) { |
| drm_dbg_kms(&dev_priv->drm, |
| "plane 0 offset (0x%08x) must be 0\n", |
| mode_cmd->offsets[0]); |
| goto err; |
| } |
| |
| drm_helper_mode_fill_fb_struct(&dev_priv->drm, fb, mode_cmd); |
| |
| for (i = 0; i < fb->format->num_planes; i++) { |
| u32 stride_alignment; |
| |
| if (mode_cmd->handles[i] != mode_cmd->handles[0]) { |
| drm_dbg_kms(&dev_priv->drm, "bad plane %d handle\n", |
| i); |
| goto err; |
| } |
| |
| stride_alignment = intel_fb_stride_alignment(fb, i); |
| if (fb->pitches[i] & (stride_alignment - 1)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "plane %d pitch (%d) must be at least %u byte aligned\n", |
| i, fb->pitches[i], stride_alignment); |
| goto err; |
| } |
| |
| if (intel_fb_is_gen12_ccs_aux_plane(fb, i)) { |
| int ccs_aux_stride = gen12_ccs_aux_stride(intel_fb, i); |
| |
| if (fb->pitches[i] != ccs_aux_stride) { |
| drm_dbg_kms(&dev_priv->drm, |
| "ccs aux plane %d pitch (%d) must be %d\n", |
| i, |
| fb->pitches[i], ccs_aux_stride); |
| goto err; |
| } |
| } |
| |
| fb->obj[i] = &obj->base; |
| } |
| |
| ret = intel_fill_fb_info(dev_priv, intel_fb); |
| if (ret) |
| goto err; |
| |
| if (intel_fb_uses_dpt(fb)) { |
| struct i915_address_space *vm; |
| |
| vm = intel_dpt_create(intel_fb); |
| if (IS_ERR(vm)) { |
| ret = PTR_ERR(vm); |
| goto err; |
| } |
| |
| intel_fb->dpt_vm = vm; |
| } |
| |
| ret = drm_framebuffer_init(&dev_priv->drm, fb, &intel_fb_funcs); |
| if (ret) { |
| drm_err(&dev_priv->drm, "framebuffer init failed %d\n", ret); |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| intel_frontbuffer_put(intel_fb->frontbuffer); |
| return ret; |
| } |
| |
| struct drm_framebuffer * |
| intel_user_framebuffer_create(struct drm_device *dev, |
| struct drm_file *filp, |
| const struct drm_mode_fb_cmd2 *user_mode_cmd) |
| { |
| struct drm_framebuffer *fb; |
| struct drm_i915_gem_object *obj; |
| struct drm_mode_fb_cmd2 mode_cmd = *user_mode_cmd; |
| struct drm_i915_private *i915; |
| |
| obj = i915_gem_object_lookup(filp, mode_cmd.handles[0]); |
| if (!obj) |
| return ERR_PTR(-ENOENT); |
| |
| /* object is backed with LMEM for discrete */ |
| i915 = to_i915(obj->base.dev); |
| if (HAS_LMEM(i915) && !i915_gem_object_can_migrate(obj, INTEL_REGION_LMEM)) { |
| /* object is "remote", not in local memory */ |
| i915_gem_object_put(obj); |
| return ERR_PTR(-EREMOTE); |
| } |
| |
| fb = intel_framebuffer_create(obj, &mode_cmd); |
| i915_gem_object_put(obj); |
| |
| return fb; |
| } |
| |
| struct drm_framebuffer * |
| intel_framebuffer_create(struct drm_i915_gem_object *obj, |
| struct drm_mode_fb_cmd2 *mode_cmd) |
| { |
| struct intel_framebuffer *intel_fb; |
| int ret; |
| |
| intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL); |
| if (!intel_fb) |
| return ERR_PTR(-ENOMEM); |
| |
| ret = intel_framebuffer_init(intel_fb, obj, mode_cmd); |
| if (ret) |
| goto err; |
| |
| return &intel_fb->base; |
| |
| err: |
| kfree(intel_fb); |
| return ERR_PTR(ret); |
| } |