blob: 41f6cbf96d3b94c39e846db181eccb742a1fbb78 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
#
# PMBus chip drivers configuration
#
menuconfig PMBUS
tristate "PMBus support"
depends on I2C
help
Say yes here if you want to enable PMBus support.
This driver can also be built as a module. If so, the module will
be called pmbus_core.
if PMBUS
config SENSORS_PMBUS
tristate "Generic PMBus devices"
default y
help
If you say yes here you get hardware monitoring support for generic
PMBus devices, including but not limited to ADP4000, BMR310, BMR453,
BMR454, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491, BMR492,
MAX20796, MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012,
TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25, and UDT020.
This driver can also be built as a module. If so, the module will
be called pmbus.
config SENSORS_ADM1266
tristate "Analog Devices ADM1266 Sequencer"
select CRC8
depends on GPIOLIB
help
If you say yes here you get hardware monitoring support for Analog
Devices ADM1266 Cascadable Super Sequencer.
This driver can also be built as a module. If so, the module will
be called adm1266.
config SENSORS_ADM1275
tristate "Analog Devices ADM1275 and compatibles"
help
If you say yes here you get hardware monitoring support for Analog
Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293,
and ADM1294 Hot-Swap Controller and Digital Power Monitors.
This driver can also be built as a module. If so, the module will
be called adm1275.
config SENSORS_BEL_PFE
tristate "Bel PFE Compatible Power Supplies"
help
If you say yes here you get hardware monitoring support for BEL
PFE1100 and PFE3000 Power Supplies.
This driver can also be built as a module. If so, the module will
be called bel-pfe.
config SENSORS_BPA_RS600
tristate "BluTek BPA-RS600 Power Supplies"
help
If you say yes here you get hardware monitoring support for BluTek
BPA-RS600 Power Supplies.
This driver can also be built as a module. If so, the module will
be called bpa-rs600.
config SENSORS_DELTA_AHE50DC_FAN
tristate "Delta AHE-50DC fan control module"
help
If you say yes here you get hardware monitoring support for
the integrated fan control module of the Delta AHE-50DC
Open19 power shelf.
This driver can also be built as a module. If so, the module
will be called delta-ahe50dc-fan.
config SENSORS_FSP_3Y
tristate "FSP/3Y-Power power supplies"
help
If you say yes here you get hardware monitoring support for
FSP/3Y-Power hot-swap power supplies.
Supported models: YH-5151E, YM-2151E
This driver can also be built as a module. If so, the module will
be called fsp-3y.
config SENSORS_IBM_CFFPS
tristate "IBM Common Form Factor Power Supply"
depends on LEDS_CLASS
help
If you say yes here you get hardware monitoring support for the IBM
Common Form Factor power supply.
This driver can also be built as a module. If so, the module will
be called ibm-cffps.
config SENSORS_DPS920AB
tristate "Delta DPS920AB Power Supply"
help
If you say yes here you get hardware monitoring support for Delta
DPS920AB Power Supplies.
This driver can also be built as a module. If so, the module will
be called dps920ab.
config SENSORS_INSPUR_IPSPS
tristate "INSPUR Power System Power Supply"
help
If you say yes here you get hardware monitoring support for the INSPUR
Power System power supply.
This driver can also be built as a module. If so, the module will
be called inspur-ipsps.
config SENSORS_IR35221
tristate "Infineon IR35221"
help
If you say yes here you get hardware monitoring support for the
Infineon IR35221 controller.
This driver can also be built as a module. If so, the module will
be called ir35221.
config SENSORS_IR36021
tristate "Infineon IR36021"
help
If you say yes here you get hardware monitoring support for Infineon
IR36021.
This driver can also be built as a module. If so, the module will
be called ir36021.
config SENSORS_IR38064
tristate "Infineon IR38064 and compatibles"
help
If you say yes here you get hardware monitoring support for Infineon
IR38060, IR38064, IR38164 and IR38263.
This driver can also be built as a module. If so, the module will
be called ir38064.
config SENSORS_IR38064_REGULATOR
bool "Regulator support for IR38064 and compatibles"
depends on SENSORS_IR38064 && REGULATOR
help
Uses the IR38064 or compatible as regulator.
config SENSORS_IRPS5401
tristate "Infineon IRPS5401"
help
If you say yes here you get hardware monitoring support for the
Infineon IRPS5401 controller.
This driver can also be built as a module. If so, the module will
be called irps5401.
config SENSORS_ISL68137
tristate "Renesas Digital Multiphase Voltage Regulators"
help
If you say yes here you get hardware monitoring support for Renesas
digital multiphase voltage regulators.
This driver can also be built as a module. If so, the module will
be called isl68137.
config SENSORS_LM25066
tristate "National Semiconductor LM25066 and compatibles"
help
If you say yes here you get hardware monitoring support for National
Semiconductor LM25056, LM25066, LM5064, and LM5066.
This driver can also be built as a module. If so, the module will
be called lm25066.
config SENSORS_LTC2978
tristate "Linear Technologies LTC2978 and compatibles"
help
If you say yes here you get hardware monitoring support for Linear
Technology LTC2972, LTC2974, LTC2975, LTC2977, LTC2978, LTC2979,
LTC2980, and LTM2987.
This driver can also be built as a module. If so, the module will
be called ltc2978.
config SENSORS_LTC2978_REGULATOR
bool "Regulator support for LTC2978 and compatibles"
depends on SENSORS_LTC2978 && REGULATOR
help
If you say yes here you get regulator support for Linear Technology
LTC3880, LTC3883, LTC3884, LTC3886, LTC3887, LTC3889, LTC7880,
LTM4644, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680, LTM4686,
and LTM4700.
config SENSORS_LTC3815
tristate "Linear Technologies LTC3815"
help
If you say yes here you get hardware monitoring support for Linear
Technology LTC3815.
This driver can also be built as a module. If so, the module will
be called ltc3815.
config SENSORS_MAX15301
tristate "Maxim MAX15301"
help
If you say yes here you get hardware monitoring support for Maxim
MAX15301, as well as for Flex BMR461.
This driver can also be built as a module. If so, the module will
be called max15301.
config SENSORS_MAX16064
tristate "Maxim MAX16064"
help
If you say yes here you get hardware monitoring support for Maxim
MAX16064.
This driver can also be built as a module. If so, the module will
be called max16064.
config SENSORS_MAX16601
tristate "Maxim MAX16508, MAX16601"
help
If you say yes here you get hardware monitoring support for Maxim
MAX16508 and MAX16601.
This driver can also be built as a module. If so, the module will
be called max16601.
config SENSORS_MAX20730
tristate "Maxim MAX20710, MAX20730, MAX20734, MAX20743"
help
If you say yes here you get hardware monitoring support for Maxim
MAX20710, MAX20730, MAX20734, and MAX20743.
This driver can also be built as a module. If so, the module will
be called max20730.
config SENSORS_MAX20751
tristate "Maxim MAX20751"
help
If you say yes here you get hardware monitoring support for Maxim
MAX20751.
This driver can also be built as a module. If so, the module will
be called max20751.
config SENSORS_MAX31785
tristate "Maxim MAX31785 and compatibles"
help
If you say yes here you get hardware monitoring support for Maxim
MAX31785.
This driver can also be built as a module. If so, the module will
be called max31785.
config SENSORS_MAX34440
tristate "Maxim MAX34440 and compatibles"
help
If you say yes here you get hardware monitoring support for Maxim
MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461.
This driver can also be built as a module. If so, the module will
be called max34440.
config SENSORS_MAX8688
tristate "Maxim MAX8688"
help
If you say yes here you get hardware monitoring support for Maxim
MAX8688.
This driver can also be built as a module. If so, the module will
be called max8688.
config SENSORS_MP2888
tristate "MPS MP2888"
help
If you say yes here you get hardware monitoring support for MPS
MP2888 Digital, Multi-Phase, Pulse-Width Modulation Controller.
This driver can also be built as a module. If so, the module will
be called mp2888.
config SENSORS_MP2975
tristate "MPS MP2975"
help
If you say yes here you get hardware monitoring support for MPS
MP2975 Dual Loop Digital Multi-Phase Controller.
This driver can also be built as a module. If so, the module will
be called mp2975.
config SENSORS_MP5023
tristate "MPS MP5023"
help
If you say yes here you get hardware monitoring support for MPS
MP5023.
This driver can also be built as a module. If so, the module will
be called mp5023.
config SENSORS_PIM4328
tristate "Flex PIM4328 and compatibles"
help
If you say yes here you get hardware monitoring support for Flex
PIM4328, PIM4820 and PIM4006 Power Interface Modules.
This driver can also be built as a module. If so, the module will
be called pim4328.
config SENSORS_PM6764TR
tristate "ST PM6764TR"
help
If you say yes here you get hardware monitoring support for ST
PM6764TR.
This driver can also be built as a module. If so, the module will
be called pm6764tr.
config SENSORS_PXE1610
tristate "Infineon PXE1610"
help
If you say yes here you get hardware monitoring support for Infineon
PXE1610.
This driver can also be built as a module. If so, the module will
be called pxe1610.
config SENSORS_Q54SJ108A2
tristate "Delta Power Supplies Q54SJ108A2"
help
If you say yes here you get hardware monitoring support for Delta
Q54SJ108A2 series Power Supplies.
This driver can also be built as a module. If so, the module will
be called q54sj108a2.
config SENSORS_STPDDC60
tristate "ST STPDDC60"
help
If you say yes here you get hardware monitoring support for ST
STPDDC60 Universal Digital Multicell Controller, as well as for
Flex BMR481.
This driver can also be built as a module. If so, the module will
be called stpddc60.
config SENSORS_TPS40422
tristate "TI TPS40422"
help
If you say yes here you get hardware monitoring support for TI
TPS40422.
This driver can also be built as a module. If so, the module will
be called tps40422.
config SENSORS_TPS53679
tristate "TI TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, TPS53688"
help
If you say yes here you get hardware monitoring support for TI
TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, and TPS53688.
This driver can also be built as a module. If so, the module will
be called tps53679.
config SENSORS_UCD9000
tristate "TI UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910"
help
If you say yes here you get hardware monitoring support for TI
UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910, Sequencer
and System Health Controllers.
This driver can also be built as a module. If so, the module will
be called ucd9000.
config SENSORS_UCD9200
tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
help
If you say yes here you get hardware monitoring support for TI
UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
Digital PWM System Controllers.
This driver can also be built as a module. If so, the module will
be called ucd9200.
config SENSORS_XDPE122
tristate "Infineon XDPE122 family"
help
If you say yes here you get hardware monitoring support for Infineon
XDPE12254, XDPE12284, device.
This driver can also be built as a module. If so, the module will
be called xdpe12284.
config SENSORS_ZL6100
tristate "Intersil ZL6100 and compatibles"
help
If you say yes here you get hardware monitoring support for Intersil
ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105,
ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for
Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464.
This driver can also be built as a module. If so, the module will
be called zl6100.
endif # PMBUS