| /* |
| * tm6000-input.c - driver for TM5600/TM6000/TM6010 USB video capture devices |
| * |
| * Copyright (C) 2010 Stefan Ringel <stefan.ringel@arcor.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation version 2 |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| |
| #include <linux/input.h> |
| #include <linux/usb.h> |
| |
| #include <media/rc-core.h> |
| |
| #include "tm6000.h" |
| #include "tm6000-regs.h" |
| |
| static unsigned int ir_debug; |
| module_param(ir_debug, int, 0644); |
| MODULE_PARM_DESC(ir_debug, "enable debug message [IR]"); |
| |
| static unsigned int enable_ir = 1; |
| module_param(enable_ir, int, 0644); |
| MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)"); |
| |
| /* number of 50ms for ON-OFF-ON power led */ |
| /* show IR activity */ |
| #define PWLED_OFF 2 |
| |
| #undef dprintk |
| |
| #define dprintk(fmt, arg...) \ |
| if (ir_debug) { \ |
| printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \ |
| } |
| |
| struct tm6000_ir_poll_result { |
| u16 rc_data; |
| }; |
| |
| struct tm6000_IR { |
| struct tm6000_core *dev; |
| struct rc_dev *rc; |
| char name[32]; |
| char phys[32]; |
| |
| /* poll expernal decoder */ |
| int polling; |
| struct delayed_work work; |
| u8 wait:1; |
| u8 key:1; |
| u8 pwled:1; |
| u8 pwledcnt; |
| u16 key_addr; |
| struct urb *int_urb; |
| u8 *urb_data; |
| |
| int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *); |
| |
| /* IR device properties */ |
| u64 rc_type; |
| }; |
| |
| |
| void tm6000_ir_wait(struct tm6000_core *dev, u8 state) |
| { |
| struct tm6000_IR *ir = dev->ir; |
| |
| if (!dev->ir) |
| return; |
| |
| if (state) |
| ir->wait = 1; |
| else |
| ir->wait = 0; |
| } |
| |
| |
| static int tm6000_ir_config(struct tm6000_IR *ir) |
| { |
| struct tm6000_core *dev = ir->dev; |
| u8 buf[10]; |
| int rc; |
| |
| switch (ir->rc_type) { |
| case RC_TYPE_NEC: |
| /* Setup IR decoder for NEC standard 12MHz system clock */ |
| /* IR_LEADER_CNT = 0.9ms */ |
| tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER1, 0xaa); |
| tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER0, 0x30); |
| /* IR_PULSE_CNT = 0.7ms */ |
| tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT1, 0x20); |
| tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT0, 0xd0); |
| /* Remote WAKEUP = enable */ |
| tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe); |
| /* IR_WKUP_SEL = Low byte in decoded IR data */ |
| tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_SEL, 0xff); |
| /* IR_WKU_ADD code */ |
| tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_ADD, 0xff); |
| tm6000_flash_led(dev, 0); |
| msleep(100); |
| tm6000_flash_led(dev, 1); |
| break; |
| default: |
| /* hack */ |
| buf[0] = 0xff; |
| buf[1] = 0xff; |
| buf[2] = 0xf2; |
| buf[3] = 0x2b; |
| buf[4] = 0x20; |
| buf[5] = 0x35; |
| buf[6] = 0x60; |
| buf[7] = 0x04; |
| buf[8] = 0xc0; |
| buf[9] = 0x08; |
| |
| rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a); |
| msleep(100); |
| |
| if (rc < 0) { |
| printk(KERN_INFO "IR configuration failed"); |
| return rc; |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void tm6000_ir_urb_received(struct urb *urb) |
| { |
| struct tm6000_core *dev = urb->context; |
| struct tm6000_IR *ir = dev->ir; |
| int rc; |
| |
| if (urb->status != 0) |
| printk(KERN_INFO "not ready\n"); |
| else if (urb->actual_length > 0) { |
| memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length); |
| |
| dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0], |
| ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]); |
| |
| ir->key = 1; |
| } |
| |
| rc = usb_submit_urb(urb, GFP_ATOMIC); |
| } |
| |
| static int default_polling_getkey(struct tm6000_IR *ir, |
| struct tm6000_ir_poll_result *poll_result) |
| { |
| struct tm6000_core *dev = ir->dev; |
| int rc; |
| u8 buf[2]; |
| |
| if (ir->wait && !&dev->int_in) |
| return 0; |
| |
| if (&dev->int_in) { |
| switch (ir->rc_type) { |
| case RC_TYPE_RC5: |
| poll_result->rc_data = ir->urb_data[0]; |
| break; |
| case RC_TYPE_NEC: |
| if (ir->urb_data[1] == ((ir->key_addr >> 8) & 0xff)) { |
| poll_result->rc_data = ir->urb_data[0] |
| | ir->urb_data[1] << 8; |
| } |
| break; |
| default: |
| poll_result->rc_data = ir->urb_data[0] |
| | ir->urb_data[1] << 8; |
| break; |
| } |
| } else { |
| tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0); |
| msleep(10); |
| tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1); |
| msleep(10); |
| |
| if (ir->rc_type == RC_TYPE_RC5) { |
| rc = tm6000_read_write_usb(dev, USB_DIR_IN | |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| REQ_02_GET_IR_CODE, 0, 0, buf, 1); |
| |
| msleep(10); |
| |
| dprintk("read data=%02x\n", buf[0]); |
| if (rc < 0) |
| return rc; |
| |
| poll_result->rc_data = buf[0]; |
| } else { |
| rc = tm6000_read_write_usb(dev, USB_DIR_IN | |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| REQ_02_GET_IR_CODE, 0, 0, buf, 2); |
| |
| msleep(10); |
| |
| dprintk("read data=%04x\n", buf[0] | buf[1] << 8); |
| if (rc < 0) |
| return rc; |
| |
| poll_result->rc_data = buf[0] | buf[1] << 8; |
| } |
| if ((poll_result->rc_data & 0x00ff) != 0xff) |
| ir->key = 1; |
| } |
| return 0; |
| } |
| |
| static void tm6000_ir_handle_key(struct tm6000_IR *ir) |
| { |
| struct tm6000_core *dev = ir->dev; |
| int result; |
| struct tm6000_ir_poll_result poll_result; |
| |
| /* read the registers containing the IR status */ |
| result = ir->get_key(ir, &poll_result); |
| if (result < 0) { |
| printk(KERN_INFO "ir->get_key() failed %d\n", result); |
| return; |
| } |
| |
| dprintk("ir->get_key result data=%04x\n", poll_result.rc_data); |
| |
| if (ir->pwled) { |
| if (ir->pwledcnt >= PWLED_OFF) { |
| ir->pwled = 0; |
| ir->pwledcnt = 0; |
| tm6000_flash_led(dev, 1); |
| } else |
| ir->pwledcnt += 1; |
| } |
| |
| if (ir->key) { |
| rc_keydown(ir->rc, poll_result.rc_data, 0); |
| ir->key = 0; |
| ir->pwled = 1; |
| ir->pwledcnt = 0; |
| tm6000_flash_led(dev, 0); |
| } |
| return; |
| } |
| |
| static void tm6000_ir_work(struct work_struct *work) |
| { |
| struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work); |
| |
| tm6000_ir_handle_key(ir); |
| schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling)); |
| } |
| |
| static int tm6000_ir_start(struct rc_dev *rc) |
| { |
| struct tm6000_IR *ir = rc->priv; |
| |
| INIT_DELAYED_WORK(&ir->work, tm6000_ir_work); |
| schedule_delayed_work(&ir->work, 0); |
| |
| return 0; |
| } |
| |
| static void tm6000_ir_stop(struct rc_dev *rc) |
| { |
| struct tm6000_IR *ir = rc->priv; |
| |
| cancel_delayed_work_sync(&ir->work); |
| } |
| |
| int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type) |
| { |
| struct tm6000_IR *ir = rc->priv; |
| |
| if (!ir) |
| return 0; |
| |
| if ((rc->rc_map.scan) && (rc_type == RC_TYPE_NEC)) |
| ir->key_addr = ((rc->rc_map.scan[0].scancode >> 8) & 0xffff); |
| |
| ir->get_key = default_polling_getkey; |
| ir->rc_type = rc_type; |
| |
| tm6000_ir_config(ir); |
| /* TODO */ |
| return 0; |
| } |
| |
| int tm6000_ir_int_start(struct tm6000_core *dev) |
| { |
| struct tm6000_IR *ir = dev->ir; |
| int pipe, size; |
| int err = -ENOMEM; |
| |
| |
| if (!ir) |
| return -ENODEV; |
| |
| ir->int_urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!ir->int_urb) |
| return -ENOMEM; |
| |
| pipe = usb_rcvintpipe(dev->udev, |
| dev->int_in.endp->desc.bEndpointAddress |
| & USB_ENDPOINT_NUMBER_MASK); |
| |
| size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe)); |
| dprintk("IR max size: %d\n", size); |
| |
| ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL); |
| if (ir->int_urb->transfer_buffer == NULL) { |
| usb_free_urb(ir->int_urb); |
| return err; |
| } |
| dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval); |
| usb_fill_int_urb(ir->int_urb, dev->udev, pipe, |
| ir->int_urb->transfer_buffer, size, |
| tm6000_ir_urb_received, dev, |
| dev->int_in.endp->desc.bInterval); |
| err = usb_submit_urb(ir->int_urb, GFP_KERNEL); |
| if (err) { |
| kfree(ir->int_urb->transfer_buffer); |
| usb_free_urb(ir->int_urb); |
| return err; |
| } |
| ir->urb_data = kzalloc(size, GFP_KERNEL); |
| |
| return 0; |
| } |
| |
| void tm6000_ir_int_stop(struct tm6000_core *dev) |
| { |
| struct tm6000_IR *ir = dev->ir; |
| |
| if (!ir) |
| return; |
| |
| usb_kill_urb(ir->int_urb); |
| kfree(ir->int_urb->transfer_buffer); |
| usb_free_urb(ir->int_urb); |
| ir->int_urb = NULL; |
| kfree(ir->urb_data); |
| ir->urb_data = NULL; |
| } |
| |
| int tm6000_ir_init(struct tm6000_core *dev) |
| { |
| struct tm6000_IR *ir; |
| struct rc_dev *rc; |
| int err = -ENOMEM; |
| |
| if (!enable_ir) |
| return -ENODEV; |
| |
| if (!dev->caps.has_remote) |
| return 0; |
| |
| if (!dev->ir_codes) |
| return 0; |
| |
| ir = kzalloc(sizeof(*ir), GFP_KERNEL); |
| rc = rc_allocate_device(); |
| if (!ir || !rc) |
| goto out; |
| |
| /* record handles to ourself */ |
| ir->dev = dev; |
| dev->ir = ir; |
| ir->rc = rc; |
| |
| /* input einrichten */ |
| rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC; |
| rc->priv = ir; |
| rc->change_protocol = tm6000_ir_change_protocol; |
| rc->open = tm6000_ir_start; |
| rc->close = tm6000_ir_stop; |
| rc->driver_type = RC_DRIVER_SCANCODE; |
| |
| ir->polling = 50; |
| ir->pwled = 0; |
| ir->pwledcnt = 0; |
| |
| |
| snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)", |
| dev->name); |
| |
| usb_make_path(dev->udev, ir->phys, sizeof(ir->phys)); |
| strlcat(ir->phys, "/input0", sizeof(ir->phys)); |
| |
| tm6000_ir_change_protocol(rc, RC_TYPE_UNKNOWN); |
| |
| rc->input_name = ir->name; |
| rc->input_phys = ir->phys; |
| rc->input_id.bustype = BUS_USB; |
| rc->input_id.version = 1; |
| rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor); |
| rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct); |
| rc->map_name = dev->ir_codes; |
| rc->driver_name = "tm6000"; |
| rc->dev.parent = &dev->udev->dev; |
| |
| if (&dev->int_in) { |
| dprintk("IR over int\n"); |
| |
| err = tm6000_ir_int_start(dev); |
| |
| if (err) |
| goto out; |
| } |
| |
| /* ir register */ |
| err = rc_register_device(rc); |
| if (err) |
| goto out; |
| |
| return 0; |
| |
| out: |
| dev->ir = NULL; |
| rc_free_device(rc); |
| kfree(ir); |
| return err; |
| } |
| |
| int tm6000_ir_fini(struct tm6000_core *dev) |
| { |
| struct tm6000_IR *ir = dev->ir; |
| |
| /* skip detach on non attached board */ |
| |
| if (!ir) |
| return 0; |
| |
| rc_unregister_device(ir->rc); |
| |
| if (ir->int_urb) |
| tm6000_ir_int_stop(dev); |
| |
| kfree(ir); |
| dev->ir = NULL; |
| |
| return 0; |
| } |