| // SPDX-License-Identifier: GPL-2.0 |
| #include <dt-bindings/clock/ingenic,tcu.h> |
| #include <dt-bindings/clock/ingenic,x1830-cgu.h> |
| #include <dt-bindings/dma/x1830-dma.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "ingenic,x1830"; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "ingenic,xburst-fpu2.0-mxu2.0"; |
| reg = <0>; |
| |
| clocks = <&cgu X1830_CLK_CPU>; |
| clock-names = "cpu"; |
| }; |
| }; |
| |
| cpuintc: interrupt-controller { |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| compatible = "mti,cpu-interrupt-controller"; |
| }; |
| |
| intc: interrupt-controller@10001000 { |
| compatible = "ingenic,x1830-intc", "ingenic,jz4780-intc"; |
| reg = <0x10001000 0x50>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&cpuintc>; |
| interrupts = <2>; |
| }; |
| |
| exclk: ext { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| |
| rtclk: rtc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| |
| cgu: x1830-cgu@10000000 { |
| compatible = "ingenic,x1830-cgu", "simple-mfd"; |
| reg = <0x10000000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x10000000 0x100>; |
| |
| #clock-cells = <1>; |
| |
| clocks = <&exclk>, <&rtclk>; |
| clock-names = "ext", "rtc"; |
| |
| otg_phy: usb-phy@3c { |
| compatible = "ingenic,x1830-phy"; |
| reg = <0x3c 0x10>; |
| |
| clocks = <&cgu X1830_CLK_OTGPHY>; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| mac_phy_ctrl: mac-phy-ctrl@e8 { |
| compatible = "syscon"; |
| reg = <0xe8 0x4>; |
| }; |
| }; |
| |
| ost: timer@12000000 { |
| compatible = "ingenic,x1830-ost", "ingenic,x1000-ost"; |
| reg = <0x12000000 0x3c>; |
| |
| #clock-cells = <1>; |
| |
| clocks = <&cgu X1830_CLK_OST>; |
| clock-names = "ost"; |
| |
| interrupt-parent = <&cpuintc>; |
| interrupts = <4>; |
| }; |
| |
| tcu: timer@10002000 { |
| compatible = "ingenic,x1830-tcu", "ingenic,x1000-tcu", "simple-mfd"; |
| reg = <0x10002000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x10002000 0x1000>; |
| |
| #clock-cells = <1>; |
| |
| clocks = <&cgu X1830_CLK_RTCLK>, |
| <&cgu X1830_CLK_EXCLK>, |
| <&cgu X1830_CLK_PCLK>; |
| clock-names = "rtc", "ext", "pclk"; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <27 26 25>; |
| |
| wdt: watchdog@0 { |
| compatible = "ingenic,x1830-watchdog", "ingenic,jz4780-watchdog"; |
| reg = <0x0 0x10>; |
| |
| clocks = <&tcu TCU_CLK_WDT>; |
| clock-names = "wdt"; |
| }; |
| }; |
| |
| rtc: rtc@10003000 { |
| compatible = "ingenic,x1830-rtc", "ingenic,jz4780-rtc"; |
| reg = <0x10003000 0x4c>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <32>; |
| |
| clocks = <&cgu X1830_CLK_RTCLK>; |
| clock-names = "rtc"; |
| }; |
| |
| pinctrl: pin-controller@10010000 { |
| compatible = "ingenic,x1830-pinctrl"; |
| reg = <0x10010000 0x800>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| gpa: gpio@0 { |
| compatible = "ingenic,x1830-gpio"; |
| reg = <0>; |
| |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 0 32>; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <17>; |
| }; |
| |
| gpb: gpio@1 { |
| compatible = "ingenic,x1830-gpio"; |
| reg = <1>; |
| |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 32 32>; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <16>; |
| }; |
| |
| gpc: gpio@2 { |
| compatible = "ingenic,x1830-gpio"; |
| reg = <2>; |
| |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 64 32>; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <15>; |
| }; |
| |
| gpd: gpio@3 { |
| compatible = "ingenic,x1830-gpio"; |
| reg = <3>; |
| |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 96 32>; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <14>; |
| }; |
| }; |
| |
| uart0: serial@10030000 { |
| compatible = "ingenic,x1830-uart", "ingenic,x1000-uart"; |
| reg = <0x10030000 0x100>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <51>; |
| |
| clocks = <&exclk>, <&cgu X1830_CLK_UART0>; |
| clock-names = "baud", "module"; |
| |
| status = "disabled"; |
| }; |
| |
| uart1: serial@10031000 { |
| compatible = "ingenic,x1830-uart", "ingenic,x1000-uart"; |
| reg = <0x10031000 0x100>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <50>; |
| |
| clocks = <&exclk>, <&cgu X1830_CLK_UART1>; |
| clock-names = "baud", "module"; |
| |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c-controller@10050000 { |
| compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; |
| reg = <0x10050000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <60>; |
| |
| clocks = <&cgu X1830_CLK_SMB0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c-controller@10051000 { |
| compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; |
| reg = <0x10051000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <59>; |
| |
| clocks = <&cgu X1830_CLK_SMB1>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c-controller@10052000 { |
| compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; |
| reg = <0x10052000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <58>; |
| |
| clocks = <&cgu X1830_CLK_SMB2>; |
| |
| status = "disabled"; |
| }; |
| |
| dtrng: trng@10072000 { |
| compatible = "ingenic,x1830-dtrng"; |
| reg = <0x10072000 0xc>; |
| |
| clocks = <&cgu X1830_CLK_DTRNG>; |
| |
| status = "disabled"; |
| }; |
| |
| pdma: dma-controller@13420000 { |
| compatible = "ingenic,x1830-dma"; |
| reg = <0x13420000 0x400>, <0x13421000 0x40>; |
| #dma-cells = <2>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <10>; |
| |
| clocks = <&cgu X1830_CLK_PDMA>; |
| }; |
| |
| msc0: mmc@13450000 { |
| compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc"; |
| reg = <0x13450000 0x1000>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <37>; |
| |
| clocks = <&cgu X1830_CLK_MSC0>; |
| clock-names = "mmc"; |
| |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| cap-sdio-irq; |
| |
| dmas = <&pdma X1830_DMA_MSC0_RX 0xffffffff>, |
| <&pdma X1830_DMA_MSC0_TX 0xffffffff>; |
| dma-names = "rx", "tx"; |
| |
| status = "disabled"; |
| }; |
| |
| msc1: mmc@13460000 { |
| compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc"; |
| reg = <0x13460000 0x1000>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <36>; |
| |
| clocks = <&cgu X1830_CLK_MSC1>; |
| clock-names = "mmc"; |
| |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| cap-sdio-irq; |
| |
| dmas = <&pdma X1830_DMA_MSC1_RX 0xffffffff>, |
| <&pdma X1830_DMA_MSC1_TX 0xffffffff>; |
| dma-names = "rx", "tx"; |
| |
| status = "disabled"; |
| }; |
| |
| mac: ethernet@134b0000 { |
| compatible = "ingenic,x1830-mac", "snps,dwmac"; |
| reg = <0x134b0000 0x2000>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <55>; |
| interrupt-names = "macirq"; |
| |
| clocks = <&cgu X1830_CLK_MAC>; |
| clock-names = "stmmaceth"; |
| |
| mode-reg = <&mac_phy_ctrl>; |
| |
| status = "disabled"; |
| |
| mdio: mdio { |
| compatible = "snps,dwmac-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| otg: usb@13500000 { |
| compatible = "ingenic,x1830-otg", "snps,dwc2"; |
| reg = <0x13500000 0x40000>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <21>; |
| |
| clocks = <&cgu X1830_CLK_OTG>; |
| clock-names = "otg"; |
| |
| phys = <&otg_phy>; |
| phy-names = "usb2-phy"; |
| |
| g-rx-fifo-size = <768>; |
| g-np-tx-fifo-size = <256>; |
| g-tx-fifo-size = <256 256 256 256 256 256 256 512>; |
| |
| status = "disabled"; |
| }; |
| }; |
