| /* |
| * Copyright (C) 2010, 2011, 2012, Lemote, Inc. |
| * Author: Chen Huacai, chenhc@lemote.com |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/cpu.h> |
| #include <linux/sched.h> |
| #include <linux/sched/hotplug.h> |
| #include <linux/sched/task_stack.h> |
| #include <linux/smp.h> |
| #include <linux/cpufreq.h> |
| #include <linux/kexec.h> |
| #include <asm/processor.h> |
| #include <asm/time.h> |
| #include <asm/clock.h> |
| #include <asm/tlbflush.h> |
| #include <asm/cacheflush.h> |
| #include <loongson.h> |
| #include <workarounds.h> |
| |
| #include "smp.h" |
| |
| DEFINE_PER_CPU(int, cpu_state); |
| |
| static void *ipi_set0_regs[16]; |
| static void *ipi_clear0_regs[16]; |
| static void *ipi_status0_regs[16]; |
| static void *ipi_en0_regs[16]; |
| static void *ipi_mailbox_buf[16]; |
| static uint32_t core0_c0count[NR_CPUS]; |
| |
| /* read a 32bit value from ipi register */ |
| #define loongson3_ipi_read32(addr) readl(addr) |
| /* read a 64bit value from ipi register */ |
| #define loongson3_ipi_read64(addr) readq(addr) |
| /* write a 32bit value to ipi register */ |
| #define loongson3_ipi_write32(action, addr) \ |
| do { \ |
| writel(action, addr); \ |
| __wbflush(); \ |
| } while (0) |
| /* write a 64bit value to ipi register */ |
| #define loongson3_ipi_write64(action, addr) \ |
| do { \ |
| writeq(action, addr); \ |
| __wbflush(); \ |
| } while (0) |
| |
| static void ipi_set0_regs_init(void) |
| { |
| ipi_set0_regs[0] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + SET0); |
| ipi_set0_regs[1] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + SET0); |
| ipi_set0_regs[2] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + SET0); |
| ipi_set0_regs[3] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + SET0); |
| ipi_set0_regs[4] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + SET0); |
| ipi_set0_regs[5] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + SET0); |
| ipi_set0_regs[6] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + SET0); |
| ipi_set0_regs[7] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + SET0); |
| ipi_set0_regs[8] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + SET0); |
| ipi_set0_regs[9] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + SET0); |
| ipi_set0_regs[10] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + SET0); |
| ipi_set0_regs[11] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + SET0); |
| ipi_set0_regs[12] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + SET0); |
| ipi_set0_regs[13] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + SET0); |
| ipi_set0_regs[14] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + SET0); |
| ipi_set0_regs[15] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + SET0); |
| } |
| |
| static void ipi_clear0_regs_init(void) |
| { |
| ipi_clear0_regs[0] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + CLEAR0); |
| ipi_clear0_regs[1] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + CLEAR0); |
| ipi_clear0_regs[2] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + CLEAR0); |
| ipi_clear0_regs[3] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + CLEAR0); |
| ipi_clear0_regs[4] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + CLEAR0); |
| ipi_clear0_regs[5] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + CLEAR0); |
| ipi_clear0_regs[6] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + CLEAR0); |
| ipi_clear0_regs[7] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + CLEAR0); |
| ipi_clear0_regs[8] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + CLEAR0); |
| ipi_clear0_regs[9] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + CLEAR0); |
| ipi_clear0_regs[10] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + CLEAR0); |
| ipi_clear0_regs[11] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + CLEAR0); |
| ipi_clear0_regs[12] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + CLEAR0); |
| ipi_clear0_regs[13] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + CLEAR0); |
| ipi_clear0_regs[14] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + CLEAR0); |
| ipi_clear0_regs[15] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + CLEAR0); |
| } |
| |
| static void ipi_status0_regs_init(void) |
| { |
| ipi_status0_regs[0] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + STATUS0); |
| ipi_status0_regs[1] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + STATUS0); |
| ipi_status0_regs[2] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + STATUS0); |
| ipi_status0_regs[3] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + STATUS0); |
| ipi_status0_regs[4] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + STATUS0); |
| ipi_status0_regs[5] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + STATUS0); |
| ipi_status0_regs[6] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + STATUS0); |
| ipi_status0_regs[7] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + STATUS0); |
| ipi_status0_regs[8] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + STATUS0); |
| ipi_status0_regs[9] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + STATUS0); |
| ipi_status0_regs[10] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + STATUS0); |
| ipi_status0_regs[11] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + STATUS0); |
| ipi_status0_regs[12] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + STATUS0); |
| ipi_status0_regs[13] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + STATUS0); |
| ipi_status0_regs[14] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + STATUS0); |
| ipi_status0_regs[15] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + STATUS0); |
| } |
| |
| static void ipi_en0_regs_init(void) |
| { |
| ipi_en0_regs[0] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + EN0); |
| ipi_en0_regs[1] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + EN0); |
| ipi_en0_regs[2] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + EN0); |
| ipi_en0_regs[3] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + EN0); |
| ipi_en0_regs[4] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + EN0); |
| ipi_en0_regs[5] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + EN0); |
| ipi_en0_regs[6] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + EN0); |
| ipi_en0_regs[7] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + EN0); |
| ipi_en0_regs[8] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + EN0); |
| ipi_en0_regs[9] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + EN0); |
| ipi_en0_regs[10] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + EN0); |
| ipi_en0_regs[11] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + EN0); |
| ipi_en0_regs[12] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + EN0); |
| ipi_en0_regs[13] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + EN0); |
| ipi_en0_regs[14] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + EN0); |
| ipi_en0_regs[15] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + EN0); |
| } |
| |
| static void ipi_mailbox_buf_init(void) |
| { |
| ipi_mailbox_buf[0] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + BUF); |
| ipi_mailbox_buf[1] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + BUF); |
| ipi_mailbox_buf[2] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + BUF); |
| ipi_mailbox_buf[3] = (void *) |
| (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + BUF); |
| ipi_mailbox_buf[4] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + BUF); |
| ipi_mailbox_buf[5] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + BUF); |
| ipi_mailbox_buf[6] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + BUF); |
| ipi_mailbox_buf[7] = (void *) |
| (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + BUF); |
| ipi_mailbox_buf[8] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + BUF); |
| ipi_mailbox_buf[9] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + BUF); |
| ipi_mailbox_buf[10] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + BUF); |
| ipi_mailbox_buf[11] = (void *) |
| (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + BUF); |
| ipi_mailbox_buf[12] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + BUF); |
| ipi_mailbox_buf[13] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + BUF); |
| ipi_mailbox_buf[14] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + BUF); |
| ipi_mailbox_buf[15] = (void *) |
| (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + BUF); |
| } |
| |
| /* |
| * Simple enough, just poke the appropriate ipi register |
| */ |
| static void loongson3_send_ipi_single(int cpu, unsigned int action) |
| { |
| loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(cpu)]); |
| } |
| |
| static void |
| loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action) |
| { |
| unsigned int i; |
| |
| for_each_cpu(i, mask) |
| loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(i)]); |
| } |
| |
| #define IPI_IRQ_OFFSET 6 |
| |
| void loongson3_send_irq_by_ipi(int cpu, int irqs) |
| { |
| loongson3_ipi_write32(irqs << IPI_IRQ_OFFSET, ipi_set0_regs[cpu_logical_map(cpu)]); |
| } |
| |
| void loongson3_ipi_interrupt(struct pt_regs *regs) |
| { |
| int i, cpu = smp_processor_id(); |
| unsigned int action, c0count, irqs; |
| |
| /* Load the ipi register to figure out what we're supposed to do */ |
| action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]); |
| irqs = action >> IPI_IRQ_OFFSET; |
| |
| /* Clear the ipi register to clear the interrupt */ |
| loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu_logical_map(cpu)]); |
| |
| if (action & SMP_RESCHEDULE_YOURSELF) |
| scheduler_ipi(); |
| |
| if (action & SMP_CALL_FUNCTION) { |
| irq_enter(); |
| generic_smp_call_function_interrupt(); |
| irq_exit(); |
| } |
| |
| if (action & SMP_ASK_C0COUNT) { |
| BUG_ON(cpu != 0); |
| c0count = read_c0_count(); |
| c0count = c0count ? c0count : 1; |
| for (i = 1; i < nr_cpu_ids; i++) |
| core0_c0count[i] = c0count; |
| __wbflush(); /* Let others see the result ASAP */ |
| } |
| |
| if (irqs) { |
| int irq; |
| while ((irq = ffs(irqs))) { |
| do_IRQ(irq-1); |
| irqs &= ~(1<<(irq-1)); |
| } |
| } |
| } |
| |
| #define MAX_LOOPS 800 |
| /* |
| * SMP init and finish on secondary CPUs |
| */ |
| static void loongson3_init_secondary(void) |
| { |
| int i; |
| uint32_t initcount; |
| unsigned int cpu = smp_processor_id(); |
| unsigned int imask = STATUSF_IP7 | STATUSF_IP6 | |
| STATUSF_IP3 | STATUSF_IP2; |
| |
| /* Set interrupt mask, but don't enable */ |
| change_c0_status(ST0_IM, imask); |
| |
| for (i = 0; i < num_possible_cpus(); i++) |
| loongson3_ipi_write32(0xffffffff, ipi_en0_regs[cpu_logical_map(i)]); |
| |
| per_cpu(cpu_state, cpu) = CPU_ONLINE; |
| cpu_set_core(&cpu_data[cpu], |
| cpu_logical_map(cpu) % loongson_sysconf.cores_per_package); |
| cpu_data[cpu].package = |
| cpu_logical_map(cpu) / loongson_sysconf.cores_per_package; |
| |
| i = 0; |
| core0_c0count[cpu] = 0; |
| loongson3_send_ipi_single(0, SMP_ASK_C0COUNT); |
| while (!core0_c0count[cpu]) { |
| i++; |
| cpu_relax(); |
| } |
| |
| if (i > MAX_LOOPS) |
| i = MAX_LOOPS; |
| if (cpu_data[cpu].package) |
| initcount = core0_c0count[cpu] + i; |
| else /* Local access is faster for loops */ |
| initcount = core0_c0count[cpu] + i/2; |
| |
| write_c0_count(initcount); |
| } |
| |
| static void loongson3_smp_finish(void) |
| { |
| int cpu = smp_processor_id(); |
| |
| write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); |
| local_irq_enable(); |
| loongson3_ipi_write64(0, |
| ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x0); |
| pr_info("CPU#%d finished, CP0_ST=%x\n", |
| smp_processor_id(), read_c0_status()); |
| } |
| |
| static void __init loongson3_smp_setup(void) |
| { |
| int i = 0, num = 0; /* i: physical id, num: logical id */ |
| |
| init_cpu_possible(cpu_none_mask); |
| |
| /* For unified kernel, NR_CPUS is the maximum possible value, |
| * loongson_sysconf.nr_cpus is the really present value */ |
| while (i < loongson_sysconf.nr_cpus) { |
| if (loongson_sysconf.reserved_cpus_mask & (1<<i)) { |
| /* Reserved physical CPU cores */ |
| __cpu_number_map[i] = -1; |
| } else { |
| __cpu_number_map[i] = num; |
| __cpu_logical_map[num] = i; |
| set_cpu_possible(num, true); |
| num++; |
| } |
| i++; |
| } |
| pr_info("Detected %i available CPU(s)\n", num); |
| |
| while (num < loongson_sysconf.nr_cpus) { |
| __cpu_logical_map[num] = -1; |
| num++; |
| } |
| |
| ipi_set0_regs_init(); |
| ipi_clear0_regs_init(); |
| ipi_status0_regs_init(); |
| ipi_en0_regs_init(); |
| ipi_mailbox_buf_init(); |
| cpu_set_core(&cpu_data[0], |
| cpu_logical_map(0) % loongson_sysconf.cores_per_package); |
| cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package; |
| } |
| |
| static void __init loongson3_prepare_cpus(unsigned int max_cpus) |
| { |
| init_cpu_present(cpu_possible_mask); |
| per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; |
| } |
| |
| /* |
| * Setup the PC, SP, and GP of a secondary processor and start it runing! |
| */ |
| static int loongson3_boot_secondary(int cpu, struct task_struct *idle) |
| { |
| unsigned long startargs[4]; |
| |
| pr_info("Booting CPU#%d...\n", cpu); |
| |
| /* startargs[] are initial PC, SP and GP for secondary CPU */ |
| startargs[0] = (unsigned long)&smp_bootstrap; |
| startargs[1] = (unsigned long)__KSTK_TOS(idle); |
| startargs[2] = (unsigned long)task_thread_info(idle); |
| startargs[3] = 0; |
| |
| pr_debug("CPU#%d, func_pc=%lx, sp=%lx, gp=%lx\n", |
| cpu, startargs[0], startargs[1], startargs[2]); |
| |
| loongson3_ipi_write64(startargs[3], |
| ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x18); |
| loongson3_ipi_write64(startargs[2], |
| ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x10); |
| loongson3_ipi_write64(startargs[1], |
| ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x8); |
| loongson3_ipi_write64(startargs[0], |
| ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x0); |
| return 0; |
| } |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| |
| static int loongson3_cpu_disable(void) |
| { |
| unsigned long flags; |
| unsigned int cpu = smp_processor_id(); |
| |
| if (cpu == 0) |
| return -EBUSY; |
| |
| set_cpu_online(cpu, false); |
| calculate_cpu_foreign_map(); |
| local_irq_save(flags); |
| fixup_irqs(); |
| local_irq_restore(flags); |
| local_flush_tlb_all(); |
| |
| return 0; |
| } |
| |
| |
| static void loongson3_cpu_die(unsigned int cpu) |
| { |
| while (per_cpu(cpu_state, cpu) != CPU_DEAD) |
| cpu_relax(); |
| |
| mb(); |
| } |
| |
| /* To shutdown a core in Loongson 3, the target core should go to CKSEG1 and |
| * flush all L1 entries at first. Then, another core (usually Core 0) can |
| * safely disable the clock of the target core. loongson3_play_dead() is |
| * called via CKSEG1 (uncached and unmmaped) */ |
| static void loongson3a_r1_play_dead(int *state_addr) |
| { |
| register int val; |
| register long cpuid, core, node, count; |
| register void *addr, *base, *initfunc; |
| |
| __asm__ __volatile__( |
| " .set push \n" |
| " .set noreorder \n" |
| " li %[addr], 0x80000000 \n" /* KSEG0 */ |
| "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */ |
| " cache 0, 1(%[addr]) \n" |
| " cache 0, 2(%[addr]) \n" |
| " cache 0, 3(%[addr]) \n" |
| " cache 1, 0(%[addr]) \n" /* flush L1 DCache */ |
| " cache 1, 1(%[addr]) \n" |
| " cache 1, 2(%[addr]) \n" |
| " cache 1, 3(%[addr]) \n" |
| " addiu %[sets], %[sets], -1 \n" |
| " bnez %[sets], 1b \n" |
| " addiu %[addr], %[addr], 0x20 \n" |
| " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ |
| " sw %[val], (%[state_addr]) \n" |
| " sync \n" |
| " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */ |
| " .set pop \n" |
| : [addr] "=&r" (addr), [val] "=&r" (val) |
| : [state_addr] "r" (state_addr), |
| [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); |
| |
| __asm__ __volatile__( |
| " .set push \n" |
| " .set noreorder \n" |
| " .set mips64 \n" |
| " mfc0 %[cpuid], $15, 1 \n" |
| " andi %[cpuid], 0x3ff \n" |
| " dli %[base], 0x900000003ff01000 \n" |
| " andi %[core], %[cpuid], 0x3 \n" |
| " sll %[core], 8 \n" /* get core id */ |
| " or %[base], %[base], %[core] \n" |
| " andi %[node], %[cpuid], 0xc \n" |
| " dsll %[node], 42 \n" /* get node id */ |
| " or %[base], %[base], %[node] \n" |
| "1: li %[count], 0x100 \n" /* wait for init loop */ |
| "2: bnez %[count], 2b \n" /* limit mailbox access */ |
| " addiu %[count], -1 \n" |
| " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */ |
| " beqz %[initfunc], 1b \n" |
| " nop \n" |
| " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */ |
| " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */ |
| " ld $a1, 0x38(%[base]) \n" |
| " jr %[initfunc] \n" /* jump to initial PC */ |
| " nop \n" |
| " .set pop \n" |
| : [core] "=&r" (core), [node] "=&r" (node), |
| [base] "=&r" (base), [cpuid] "=&r" (cpuid), |
| [count] "=&r" (count), [initfunc] "=&r" (initfunc) |
| : /* No Input */ |
| : "a1"); |
| } |
| |
| static void loongson3a_r2r3_play_dead(int *state_addr) |
| { |
| register int val; |
| register long cpuid, core, node, count; |
| register void *addr, *base, *initfunc; |
| |
| __asm__ __volatile__( |
| " .set push \n" |
| " .set noreorder \n" |
| " li %[addr], 0x80000000 \n" /* KSEG0 */ |
| "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */ |
| " cache 0, 1(%[addr]) \n" |
| " cache 0, 2(%[addr]) \n" |
| " cache 0, 3(%[addr]) \n" |
| " cache 1, 0(%[addr]) \n" /* flush L1 DCache */ |
| " cache 1, 1(%[addr]) \n" |
| " cache 1, 2(%[addr]) \n" |
| " cache 1, 3(%[addr]) \n" |
| " addiu %[sets], %[sets], -1 \n" |
| " bnez %[sets], 1b \n" |
| " addiu %[addr], %[addr], 0x40 \n" |
| " li %[addr], 0x80000000 \n" /* KSEG0 */ |
| "2: cache 2, 0(%[addr]) \n" /* flush L1 VCache */ |
| " cache 2, 1(%[addr]) \n" |
| " cache 2, 2(%[addr]) \n" |
| " cache 2, 3(%[addr]) \n" |
| " cache 2, 4(%[addr]) \n" |
| " cache 2, 5(%[addr]) \n" |
| " cache 2, 6(%[addr]) \n" |
| " cache 2, 7(%[addr]) \n" |
| " cache 2, 8(%[addr]) \n" |
| " cache 2, 9(%[addr]) \n" |
| " cache 2, 10(%[addr]) \n" |
| " cache 2, 11(%[addr]) \n" |
| " cache 2, 12(%[addr]) \n" |
| " cache 2, 13(%[addr]) \n" |
| " cache 2, 14(%[addr]) \n" |
| " cache 2, 15(%[addr]) \n" |
| " addiu %[vsets], %[vsets], -1 \n" |
| " bnez %[vsets], 2b \n" |
| " addiu %[addr], %[addr], 0x40 \n" |
| " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ |
| " sw %[val], (%[state_addr]) \n" |
| " sync \n" |
| " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */ |
| " .set pop \n" |
| : [addr] "=&r" (addr), [val] "=&r" (val) |
| : [state_addr] "r" (state_addr), |
| [sets] "r" (cpu_data[smp_processor_id()].dcache.sets), |
| [vsets] "r" (cpu_data[smp_processor_id()].vcache.sets)); |
| |
| __asm__ __volatile__( |
| " .set push \n" |
| " .set noreorder \n" |
| " .set mips64 \n" |
| " mfc0 %[cpuid], $15, 1 \n" |
| " andi %[cpuid], 0x3ff \n" |
| " dli %[base], 0x900000003ff01000 \n" |
| " andi %[core], %[cpuid], 0x3 \n" |
| " sll %[core], 8 \n" /* get core id */ |
| " or %[base], %[base], %[core] \n" |
| " andi %[node], %[cpuid], 0xc \n" |
| " dsll %[node], 42 \n" /* get node id */ |
| " or %[base], %[base], %[node] \n" |
| "1: li %[count], 0x100 \n" /* wait for init loop */ |
| "2: bnez %[count], 2b \n" /* limit mailbox access */ |
| " addiu %[count], -1 \n" |
| " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */ |
| " beqz %[initfunc], 1b \n" |
| " nop \n" |
| " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */ |
| " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */ |
| " ld $a1, 0x38(%[base]) \n" |
| " jr %[initfunc] \n" /* jump to initial PC */ |
| " nop \n" |
| " .set pop \n" |
| : [core] "=&r" (core), [node] "=&r" (node), |
| [base] "=&r" (base), [cpuid] "=&r" (cpuid), |
| [count] "=&r" (count), [initfunc] "=&r" (initfunc) |
| : /* No Input */ |
| : "a1"); |
| } |
| |
| static void loongson3b_play_dead(int *state_addr) |
| { |
| register int val; |
| register long cpuid, core, node, count; |
| register void *addr, *base, *initfunc; |
| |
| __asm__ __volatile__( |
| " .set push \n" |
| " .set noreorder \n" |
| " li %[addr], 0x80000000 \n" /* KSEG0 */ |
| "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */ |
| " cache 0, 1(%[addr]) \n" |
| " cache 0, 2(%[addr]) \n" |
| " cache 0, 3(%[addr]) \n" |
| " cache 1, 0(%[addr]) \n" /* flush L1 DCache */ |
| " cache 1, 1(%[addr]) \n" |
| " cache 1, 2(%[addr]) \n" |
| " cache 1, 3(%[addr]) \n" |
| " addiu %[sets], %[sets], -1 \n" |
| " bnez %[sets], 1b \n" |
| " addiu %[addr], %[addr], 0x20 \n" |
| " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ |
| " sw %[val], (%[state_addr]) \n" |
| " sync \n" |
| " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */ |
| " .set pop \n" |
| : [addr] "=&r" (addr), [val] "=&r" (val) |
| : [state_addr] "r" (state_addr), |
| [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); |
| |
| __asm__ __volatile__( |
| " .set push \n" |
| " .set noreorder \n" |
| " .set mips64 \n" |
| " mfc0 %[cpuid], $15, 1 \n" |
| " andi %[cpuid], 0x3ff \n" |
| " dli %[base], 0x900000003ff01000 \n" |
| " andi %[core], %[cpuid], 0x3 \n" |
| " sll %[core], 8 \n" /* get core id */ |
| " or %[base], %[base], %[core] \n" |
| " andi %[node], %[cpuid], 0xc \n" |
| " dsll %[node], 42 \n" /* get node id */ |
| " or %[base], %[base], %[node] \n" |
| " dsrl %[node], 30 \n" /* 15:14 */ |
| " or %[base], %[base], %[node] \n" |
| "1: li %[count], 0x100 \n" /* wait for init loop */ |
| "2: bnez %[count], 2b \n" /* limit mailbox access */ |
| " addiu %[count], -1 \n" |
| " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */ |
| " beqz %[initfunc], 1b \n" |
| " nop \n" |
| " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */ |
| " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */ |
| " ld $a1, 0x38(%[base]) \n" |
| " jr %[initfunc] \n" /* jump to initial PC */ |
| " nop \n" |
| " .set pop \n" |
| : [core] "=&r" (core), [node] "=&r" (node), |
| [base] "=&r" (base), [cpuid] "=&r" (cpuid), |
| [count] "=&r" (count), [initfunc] "=&r" (initfunc) |
| : /* No Input */ |
| : "a1"); |
| } |
| |
| void play_dead(void) |
| { |
| int *state_addr; |
| unsigned int cpu = smp_processor_id(); |
| void (*play_dead_at_ckseg1)(int *); |
| |
| idle_task_exit(); |
| switch (read_c0_prid() & PRID_REV_MASK) { |
| case PRID_REV_LOONGSON3A_R1: |
| default: |
| play_dead_at_ckseg1 = |
| (void *)CKSEG1ADDR((unsigned long)loongson3a_r1_play_dead); |
| break; |
| case PRID_REV_LOONGSON3A_R2_0: |
| case PRID_REV_LOONGSON3A_R2_1: |
| case PRID_REV_LOONGSON3A_R3_0: |
| case PRID_REV_LOONGSON3A_R3_1: |
| play_dead_at_ckseg1 = |
| (void *)CKSEG1ADDR((unsigned long)loongson3a_r2r3_play_dead); |
| break; |
| case PRID_REV_LOONGSON3B_R1: |
| case PRID_REV_LOONGSON3B_R2: |
| play_dead_at_ckseg1 = |
| (void *)CKSEG1ADDR((unsigned long)loongson3b_play_dead); |
| break; |
| } |
| state_addr = &per_cpu(cpu_state, cpu); |
| mb(); |
| play_dead_at_ckseg1(state_addr); |
| } |
| |
| static int loongson3_disable_clock(unsigned int cpu) |
| { |
| uint64_t core_id = cpu_core(&cpu_data[cpu]); |
| uint64_t package_id = cpu_data[cpu].package; |
| |
| if ((read_c0_prid() & PRID_REV_MASK) == PRID_REV_LOONGSON3A_R1) { |
| LOONGSON_CHIPCFG(package_id) &= ~(1 << (12 + core_id)); |
| } else { |
| if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG)) |
| LOONGSON_FREQCTRL(package_id) &= ~(1 << (core_id * 4 + 3)); |
| } |
| return 0; |
| } |
| |
| static int loongson3_enable_clock(unsigned int cpu) |
| { |
| uint64_t core_id = cpu_core(&cpu_data[cpu]); |
| uint64_t package_id = cpu_data[cpu].package; |
| |
| if ((read_c0_prid() & PRID_REV_MASK) == PRID_REV_LOONGSON3A_R1) { |
| LOONGSON_CHIPCFG(package_id) |= 1 << (12 + core_id); |
| } else { |
| if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG)) |
| LOONGSON_FREQCTRL(package_id) |= 1 << (core_id * 4 + 3); |
| } |
| return 0; |
| } |
| |
| static int register_loongson3_notifier(void) |
| { |
| return cpuhp_setup_state_nocalls(CPUHP_MIPS_SOC_PREPARE, |
| "mips/loongson:prepare", |
| loongson3_enable_clock, |
| loongson3_disable_clock); |
| } |
| early_initcall(register_loongson3_notifier); |
| |
| #endif |
| |
| const struct plat_smp_ops loongson3_smp_ops = { |
| .send_ipi_single = loongson3_send_ipi_single, |
| .send_ipi_mask = loongson3_send_ipi_mask, |
| .init_secondary = loongson3_init_secondary, |
| .smp_finish = loongson3_smp_finish, |
| .boot_secondary = loongson3_boot_secondary, |
| .smp_setup = loongson3_smp_setup, |
| .prepare_cpus = loongson3_prepare_cpus, |
| #ifdef CONFIG_HOTPLUG_CPU |
| .cpu_disable = loongson3_cpu_disable, |
| .cpu_die = loongson3_cpu_die, |
| #endif |
| #ifdef CONFIG_KEXEC |
| .kexec_nonboot_cpu = kexec_nonboot_cpu_jump, |
| #endif |
| }; |
