| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/regulator/socionext,uniphier-regulator.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Socionext UniPhier regulator controller |
| |
| description: | |
| This regulator controls VBUS and belongs to USB3 glue layer. Before using |
| the regulator, it is necessary to control the clocks and resets to enable |
| this layer. These clocks and resets should be described in each property. |
| |
| maintainers: |
| - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
| |
| allOf: |
| - $ref: "regulator.yaml#" |
| |
| # USB3 Controller |
| |
| properties: |
| compatible: |
| enum: |
| - socionext,uniphier-pro4-usb3-regulator |
| - socionext,uniphier-pro5-usb3-regulator |
| - socionext,uniphier-pxs2-usb3-regulator |
| - socionext,uniphier-ld20-usb3-regulator |
| - socionext,uniphier-pxs3-usb3-regulator |
| - socionext,uniphier-nx1-usb3-regulator |
| |
| reg: |
| maxItems: 1 |
| |
| clocks: |
| minItems: 1 |
| maxItems: 2 |
| |
| clock-names: |
| oneOf: |
| - items: # for Pro4, Pro5 |
| - const: gio |
| - const: link |
| - items: # for others |
| - const: link |
| |
| resets: |
| minItems: 1 |
| maxItems: 2 |
| |
| reset-names: |
| oneOf: |
| - items: # for Pro4, Pro5 |
| - const: gio |
| - const: link |
| - items: |
| - const: link |
| |
| additionalProperties: false |
| |
| required: |
| - compatible |
| - reg |
| - clocks |
| - clock-names |
| - resets |
| - reset-names |
| |
| examples: |
| - | |
| usb-glue@65b00000 { |
| compatible = "simple-mfd"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x65b00000 0x400>; |
| |
| usb_vbus0: regulators@100 { |
| compatible = "socionext,uniphier-ld20-usb3-regulator"; |
| reg = <0x100 0x10>; |
| clock-names = "link"; |
| clocks = <&sys_clk 14>; |
| reset-names = "link"; |
| resets = <&sys_rst 14>; |
| }; |
| }; |
| |
