| /* |
| * OpenRISC signal.c |
| * |
| * Linux architectural port borrowing liberally from similar works of |
| * others. All original copyrights apply as per the original source |
| * declaration. |
| * |
| * Modifications for the OpenRISC architecture: |
| * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com> |
| * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/kernel.h> |
| #include <linux/signal.h> |
| #include <linux/errno.h> |
| #include <linux/wait.h> |
| #include <linux/ptrace.h> |
| #include <linux/unistd.h> |
| #include <linux/stddef.h> |
| #include <linux/tracehook.h> |
| |
| #include <asm/processor.h> |
| #include <asm/syscall.h> |
| #include <asm/ucontext.h> |
| #include <asm/uaccess.h> |
| |
| #define DEBUG_SIG 0 |
| |
| struct rt_sigframe { |
| struct siginfo info; |
| struct ucontext uc; |
| unsigned char retcode[16]; /* trampoline code */ |
| }; |
| |
| static int restore_sigcontext(struct pt_regs *regs, |
| struct sigcontext __user *sc) |
| { |
| int err = 0; |
| |
| /* Always make any pending restarted system calls return -EINTR */ |
| current_thread_info()->restart_block.fn = do_no_restart_syscall; |
| |
| /* |
| * Restore the regs from &sc->regs. |
| * (sc is already checked for VERIFY_READ since the sigframe was |
| * checked in sys_sigreturn previously) |
| */ |
| err |= __copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long)); |
| err |= __copy_from_user(®s->pc, &sc->regs.pc, sizeof(unsigned long)); |
| err |= __copy_from_user(®s->sr, &sc->regs.sr, sizeof(unsigned long)); |
| |
| /* make sure the SM-bit is cleared so user-mode cannot fool us */ |
| regs->sr &= ~SPR_SR_SM; |
| |
| regs->orig_gpr11 = -1; /* Avoid syscall restart checks */ |
| |
| /* TODO: the other ports use regs->orig_XX to disable syscall checks |
| * after this completes, but we don't use that mechanism. maybe we can |
| * use it now ? |
| */ |
| |
| return err; |
| } |
| |
| asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs) |
| { |
| struct rt_sigframe *frame = (struct rt_sigframe __user *)regs->sp; |
| sigset_t set; |
| |
| /* |
| * Since we stacked the signal on a dword boundary, |
| * then frame should be dword aligned here. If it's |
| * not, then the user is trying to mess with us. |
| */ |
| if (((long)frame) & 3) |
| goto badframe; |
| |
| if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) |
| goto badframe; |
| if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) |
| goto badframe; |
| |
| set_current_blocked(&set); |
| |
| if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) |
| goto badframe; |
| |
| if (restore_altstack(&frame->uc.uc_stack)) |
| goto badframe; |
| |
| return regs->gpr[11]; |
| |
| badframe: |
| force_sig(SIGSEGV, current); |
| return 0; |
| } |
| |
| /* |
| * Set up a signal frame. |
| */ |
| |
| static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) |
| { |
| int err = 0; |
| |
| /* copy the regs */ |
| /* There should be no need to save callee-saved registers here... |
| * ...but we save them anyway. Revisit this |
| */ |
| err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long)); |
| err |= __copy_to_user(&sc->regs.pc, ®s->pc, sizeof(unsigned long)); |
| err |= __copy_to_user(&sc->regs.sr, ®s->sr, sizeof(unsigned long)); |
| |
| return err; |
| } |
| |
| static inline unsigned long align_sigframe(unsigned long sp) |
| { |
| return sp & ~3UL; |
| } |
| |
| /* |
| * Work out where the signal frame should go. It's either on the user stack |
| * or the alternate stack. |
| */ |
| |
| static inline void __user *get_sigframe(struct ksignal *ksig, |
| struct pt_regs *regs, size_t frame_size) |
| { |
| unsigned long sp = regs->sp; |
| |
| /* redzone */ |
| sp -= STACK_FRAME_OVERHEAD; |
| sp = sigsp(sp, ksig); |
| sp = align_sigframe(sp - frame_size); |
| |
| return (void __user *)sp; |
| } |
| |
| /* grab and setup a signal frame. |
| * |
| * basically we stack a lot of state info, and arrange for the |
| * user-mode program to return to the kernel using either a |
| * trampoline which performs the syscall sigreturn, or a provided |
| * user-mode trampoline. |
| */ |
| static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, |
| struct pt_regs *regs) |
| { |
| struct rt_sigframe *frame; |
| unsigned long return_ip; |
| int err = 0; |
| |
| frame = get_sigframe(ksig, regs, sizeof(*frame)); |
| |
| if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) |
| return -EFAULT; |
| |
| /* Create siginfo. */ |
| if (ksig->ka.sa.sa_flags & SA_SIGINFO) |
| err |= copy_siginfo_to_user(&frame->info, &ksig->info); |
| |
| /* Create the ucontext. */ |
| err |= __put_user(0, &frame->uc.uc_flags); |
| err |= __put_user(NULL, &frame->uc.uc_link); |
| err |= __save_altstack(&frame->uc.uc_stack, regs->sp); |
| err |= setup_sigcontext(regs, &frame->uc.uc_mcontext); |
| |
| err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); |
| |
| if (err) |
| return -EFAULT; |
| |
| /* trampoline - the desired return ip is the retcode itself */ |
| return_ip = (unsigned long)&frame->retcode; |
| /* This is: |
| l.ori r11,r0,__NR_sigreturn |
| l.sys 1 |
| */ |
| err |= __put_user(0xa960, (short *)(frame->retcode + 0)); |
| err |= __put_user(__NR_rt_sigreturn, (short *)(frame->retcode + 2)); |
| err |= __put_user(0x20000001, (unsigned long *)(frame->retcode + 4)); |
| err |= __put_user(0x15000000, (unsigned long *)(frame->retcode + 8)); |
| |
| if (err) |
| return -EFAULT; |
| |
| /* TODO what is the current->exec_domain stuff and invmap ? */ |
| |
| /* Set up registers for signal handler */ |
| regs->pc = (unsigned long)ksig->ka.sa.sa_handler; /* what we enter NOW */ |
| regs->gpr[9] = (unsigned long)return_ip; /* what we enter LATER */ |
| regs->gpr[3] = (unsigned long)ksig->sig; /* arg 1: signo */ |
| regs->gpr[4] = (unsigned long)&frame->info; /* arg 2: (siginfo_t*) */ |
| regs->gpr[5] = (unsigned long)&frame->uc; /* arg 3: ucontext */ |
| |
| /* actually move the usp to reflect the stacked frame */ |
| regs->sp = (unsigned long)frame; |
| |
| return 0; |
| } |
| |
| static inline void |
| handle_signal(struct ksignal *ksig, struct pt_regs *regs) |
| { |
| int ret; |
| |
| ret = setup_rt_frame(ksig, sigmask_to_save(), regs); |
| |
| signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP)); |
| } |
| |
| /* |
| * Note that 'init' is a special process: it doesn't get signals it doesn't |
| * want to handle. Thus you cannot kill init even with a SIGKILL even by |
| * mistake. |
| * |
| * Also note that the regs structure given here as an argument, is the latest |
| * pushed pt_regs. It may or may not be the same as the first pushed registers |
| * when the initial usermode->kernelmode transition took place. Therefore |
| * we can use user_mode(regs) to see if we came directly from kernel or user |
| * mode below. |
| */ |
| |
| int do_signal(struct pt_regs *regs, int syscall) |
| { |
| struct ksignal ksig; |
| unsigned long continue_addr = 0; |
| unsigned long restart_addr = 0; |
| unsigned long retval = 0; |
| int restart = 0; |
| |
| if (syscall) { |
| continue_addr = regs->pc; |
| restart_addr = continue_addr - 4; |
| retval = regs->gpr[11]; |
| |
| /* |
| * Setup syscall restart here so that a debugger will |
| * see the already changed PC. |
| */ |
| switch (retval) { |
| case -ERESTART_RESTARTBLOCK: |
| restart = -2; |
| /* Fall through */ |
| case -ERESTARTNOHAND: |
| case -ERESTARTSYS: |
| case -ERESTARTNOINTR: |
| restart++; |
| regs->gpr[11] = regs->orig_gpr11; |
| regs->pc = restart_addr; |
| break; |
| } |
| } |
| |
| /* |
| * Get the signal to deliver. During the call to get_signal the |
| * debugger may change all our registers so we may need to revert |
| * the decision to restart the syscall; specifically, if the PC is |
| * changed, don't restart the syscall. |
| */ |
| if (get_signal(&ksig)) { |
| if (unlikely(restart) && regs->pc == restart_addr) { |
| if (retval == -ERESTARTNOHAND || |
| retval == -ERESTART_RESTARTBLOCK |
| || (retval == -ERESTARTSYS |
| && !(ksig.ka.sa.sa_flags & SA_RESTART))) { |
| /* No automatic restart */ |
| regs->gpr[11] = -EINTR; |
| regs->pc = continue_addr; |
| } |
| } |
| handle_signal(&ksig, regs); |
| } else { |
| /* no handler */ |
| restore_saved_sigmask(); |
| /* |
| * Restore pt_regs PC as syscall restart will be handled by |
| * kernel without return to userspace |
| */ |
| if (unlikely(restart) && regs->pc == restart_addr) { |
| regs->pc = continue_addr; |
| return restart; |
| } |
| } |
| |
| return 0; |
| } |
| |
| asmlinkage int |
| do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall) |
| { |
| do { |
| if (likely(thread_flags & _TIF_NEED_RESCHED)) { |
| schedule(); |
| } else { |
| if (unlikely(!user_mode(regs))) |
| return 0; |
| local_irq_enable(); |
| if (thread_flags & _TIF_SIGPENDING) { |
| int restart = do_signal(regs, syscall); |
| if (unlikely(restart)) { |
| /* |
| * Restart without handlers. |
| * Deal with it without leaving |
| * the kernel space. |
| */ |
| return restart; |
| } |
| syscall = 0; |
| } else { |
| clear_thread_flag(TIF_NOTIFY_RESUME); |
| tracehook_notify_resume(regs); |
| } |
| } |
| local_irq_disable(); |
| thread_flags = current_thread_info()->flags; |
| } while (thread_flags & _TIF_WORK_MASK); |
| return 0; |
| } |