| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2019 MediaTek Inc. |
| * Author: jitao.shi <jitao.shi@mediatek.com> |
| */ |
| |
| #include "mtk_mipi_tx.h" |
| |
| #define MIPITX_LANE_CON 0x000c |
| #define RG_DSI_CPHY_T1DRV_EN BIT(0) |
| #define RG_DSI_ANA_CK_SEL BIT(1) |
| #define RG_DSI_PHY_CK_SEL BIT(2) |
| #define RG_DSI_CPHY_EN BIT(3) |
| #define RG_DSI_PHYCK_INV_EN BIT(4) |
| #define RG_DSI_PWR04_EN BIT(5) |
| #define RG_DSI_BG_LPF_EN BIT(6) |
| #define RG_DSI_BG_CORE_EN BIT(7) |
| #define RG_DSI_PAD_TIEL_SEL BIT(8) |
| |
| #define MIPITX_VOLTAGE_SEL 0x0010 |
| #define RG_DSI_HSTX_LDO_REF_SEL (0xf << 6) |
| |
| #define MIPITX_PLL_PWR 0x0028 |
| #define MIPITX_PLL_CON0 0x002c |
| #define MIPITX_PLL_CON1 0x0030 |
| #define MIPITX_PLL_CON2 0x0034 |
| #define MIPITX_PLL_CON3 0x0038 |
| #define MIPITX_PLL_CON4 0x003c |
| #define RG_DSI_PLL_IBIAS (3 << 10) |
| |
| #define MIPITX_D2P_RTCODE 0x0100 |
| #define MIPITX_D2_SW_CTL_EN 0x0144 |
| #define MIPITX_D0_SW_CTL_EN 0x0244 |
| #define MIPITX_CK_CKMODE_EN 0x0328 |
| #define DSI_CK_CKMODE_EN BIT(0) |
| #define MIPITX_CK_SW_CTL_EN 0x0344 |
| #define MIPITX_D1_SW_CTL_EN 0x0444 |
| #define MIPITX_D3_SW_CTL_EN 0x0544 |
| #define DSI_SW_CTL_EN BIT(0) |
| #define AD_DSI_PLL_SDM_PWR_ON BIT(0) |
| #define AD_DSI_PLL_SDM_ISO_EN BIT(1) |
| |
| #define RG_DSI_PLL_EN BIT(4) |
| #define RG_DSI_PLL_POSDIV (0x7 << 8) |
| |
| static int mtk_mipi_tx_pll_enable(struct clk_hw *hw) |
| { |
| struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw); |
| unsigned int txdiv, txdiv0; |
| u64 pcw; |
| |
| dev_dbg(mipi_tx->dev, "enable: %u bps\n", mipi_tx->data_rate); |
| |
| if (mipi_tx->data_rate >= 2000000000) { |
| txdiv = 1; |
| txdiv0 = 0; |
| } else if (mipi_tx->data_rate >= 1000000000) { |
| txdiv = 2; |
| txdiv0 = 1; |
| } else if (mipi_tx->data_rate >= 500000000) { |
| txdiv = 4; |
| txdiv0 = 2; |
| } else if (mipi_tx->data_rate > 250000000) { |
| txdiv = 8; |
| txdiv0 = 3; |
| } else if (mipi_tx->data_rate >= 125000000) { |
| txdiv = 16; |
| txdiv0 = 4; |
| } else { |
| return -EINVAL; |
| } |
| |
| mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_CON4, RG_DSI_PLL_IBIAS); |
| |
| mtk_mipi_tx_set_bits(mipi_tx, MIPITX_PLL_PWR, AD_DSI_PLL_SDM_PWR_ON); |
| mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_CON1, RG_DSI_PLL_EN); |
| udelay(1); |
| mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_PWR, AD_DSI_PLL_SDM_ISO_EN); |
| pcw = div_u64(((u64)mipi_tx->data_rate * txdiv) << 24, 26000000); |
| writel(pcw, mipi_tx->regs + MIPITX_PLL_CON0); |
| mtk_mipi_tx_update_bits(mipi_tx, MIPITX_PLL_CON1, RG_DSI_PLL_POSDIV, |
| txdiv0 << 8); |
| mtk_mipi_tx_set_bits(mipi_tx, MIPITX_PLL_CON1, RG_DSI_PLL_EN); |
| |
| return 0; |
| } |
| |
| static void mtk_mipi_tx_pll_disable(struct clk_hw *hw) |
| { |
| struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw); |
| |
| mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_CON1, RG_DSI_PLL_EN); |
| |
| mtk_mipi_tx_set_bits(mipi_tx, MIPITX_PLL_PWR, AD_DSI_PLL_SDM_ISO_EN); |
| mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_PWR, AD_DSI_PLL_SDM_PWR_ON); |
| } |
| |
| static long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| return clamp_val(rate, 50000000, 1600000000); |
| } |
| |
| static const struct clk_ops mtk_mipi_tx_pll_ops = { |
| .enable = mtk_mipi_tx_pll_enable, |
| .disable = mtk_mipi_tx_pll_disable, |
| .round_rate = mtk_mipi_tx_pll_round_rate, |
| .set_rate = mtk_mipi_tx_pll_set_rate, |
| .recalc_rate = mtk_mipi_tx_pll_recalc_rate, |
| }; |
| |
| static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx) |
| { |
| int i, j; |
| |
| for (i = 0; i < 5; i++) { |
| if ((mipi_tx->rt_code[i] & 0x1f) == 0) |
| mipi_tx->rt_code[i] |= 0x10; |
| |
| if ((mipi_tx->rt_code[i] >> 5 & 0x1f) == 0) |
| mipi_tx->rt_code[i] |= 0x10 << 5; |
| |
| for (j = 0; j < 10; j++) |
| mtk_mipi_tx_update_bits(mipi_tx, |
| MIPITX_D2P_RTCODE * (i + 1) + j * 4, |
| 1, mipi_tx->rt_code[i] >> j & 1); |
| } |
| } |
| |
| static void mtk_mipi_tx_power_on_signal(struct phy *phy) |
| { |
| struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); |
| |
| /* BG_LPF_EN / BG_CORE_EN */ |
| writel(RG_DSI_PAD_TIEL_SEL | RG_DSI_BG_CORE_EN, |
| mipi_tx->regs + MIPITX_LANE_CON); |
| usleep_range(30, 100); |
| writel(RG_DSI_BG_CORE_EN | RG_DSI_BG_LPF_EN, |
| mipi_tx->regs + MIPITX_LANE_CON); |
| |
| /* Switch OFF each Lane */ |
| mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D0_SW_CTL_EN, DSI_SW_CTL_EN); |
| mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D1_SW_CTL_EN, DSI_SW_CTL_EN); |
| mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D2_SW_CTL_EN, DSI_SW_CTL_EN); |
| mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN); |
| mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN); |
| |
| mtk_mipi_tx_update_bits(mipi_tx, MIPITX_VOLTAGE_SEL, |
| RG_DSI_HSTX_LDO_REF_SEL, |
| (mipi_tx->mipitx_drive - 3000) / 200 << 6); |
| |
| mtk_mipi_tx_config_calibration_data(mipi_tx); |
| |
| mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN); |
| } |
| |
| static void mtk_mipi_tx_power_off_signal(struct phy *phy) |
| { |
| struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); |
| |
| /* Switch ON each Lane */ |
| mtk_mipi_tx_set_bits(mipi_tx, MIPITX_D0_SW_CTL_EN, DSI_SW_CTL_EN); |
| mtk_mipi_tx_set_bits(mipi_tx, MIPITX_D1_SW_CTL_EN, DSI_SW_CTL_EN); |
| mtk_mipi_tx_set_bits(mipi_tx, MIPITX_D2_SW_CTL_EN, DSI_SW_CTL_EN); |
| mtk_mipi_tx_set_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN); |
| mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN); |
| |
| writel(RG_DSI_PAD_TIEL_SEL | RG_DSI_BG_CORE_EN, |
| mipi_tx->regs + MIPITX_LANE_CON); |
| writel(RG_DSI_PAD_TIEL_SEL, mipi_tx->regs + MIPITX_LANE_CON); |
| } |
| |
| const struct mtk_mipitx_data mt8183_mipitx_data = { |
| .mipi_tx_clk_ops = &mtk_mipi_tx_pll_ops, |
| .mipi_tx_enable_signal = mtk_mipi_tx_power_on_signal, |
| .mipi_tx_disable_signal = mtk_mipi_tx_power_off_signal, |
| }; |