| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. |
| * Copyright (c) 2022, Linaro Ltd |
| */ |
| #include <linux/auxiliary_bus.h> |
| #include <linux/bitfield.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/mutex.h> |
| #include <linux/property.h> |
| #include <linux/soc/qcom/pdr.h> |
| #include <drm/drm_bridge.h> |
| |
| #include <linux/usb/typec_altmode.h> |
| #include <linux/usb/typec_dp.h> |
| #include <linux/usb/typec_mux.h> |
| |
| #include <linux/soc/qcom/pmic_glink.h> |
| |
| #define PMIC_GLINK_MAX_PORTS 2 |
| |
| #define USBC_SC8180X_NOTIFY_IND 0x13 |
| #define USBC_CMD_WRITE_REQ 0x15 |
| #define USBC_NOTIFY_IND 0x16 |
| |
| #define ALTMODE_PAN_EN 0x10 |
| #define ALTMODE_PAN_ACK 0x11 |
| |
| struct usbc_write_req { |
| struct pmic_glink_hdr hdr; |
| __le32 cmd; |
| __le32 arg; |
| __le32 reserved; |
| }; |
| |
| #define NOTIFY_PAYLOAD_SIZE 16 |
| struct usbc_notify { |
| struct pmic_glink_hdr hdr; |
| char payload[NOTIFY_PAYLOAD_SIZE]; |
| u32 reserved; |
| }; |
| |
| struct usbc_sc8180x_notify { |
| struct pmic_glink_hdr hdr; |
| __le32 notification; |
| __le32 reserved[2]; |
| }; |
| |
| enum pmic_glink_altmode_pin_assignment { |
| DPAM_HPD_OUT, |
| DPAM_HPD_A, |
| DPAM_HPD_B, |
| DPAM_HPD_C, |
| DPAM_HPD_D, |
| DPAM_HPD_E, |
| DPAM_HPD_F, |
| }; |
| |
| struct pmic_glink_altmode; |
| |
| #define work_to_altmode_port(w) container_of((w), struct pmic_glink_altmode_port, work) |
| |
| struct pmic_glink_altmode_port { |
| struct pmic_glink_altmode *altmode; |
| unsigned int index; |
| |
| struct typec_switch *typec_switch; |
| struct typec_mux *typec_mux; |
| struct typec_mux_state state; |
| struct typec_altmode dp_alt; |
| |
| struct work_struct work; |
| |
| struct drm_bridge bridge; |
| |
| enum typec_orientation orientation; |
| u16 svid; |
| u8 dp_data; |
| u8 mode; |
| u8 hpd_state; |
| u8 hpd_irq; |
| }; |
| |
| #define work_to_altmode(w) container_of((w), struct pmic_glink_altmode, enable_work) |
| |
| struct pmic_glink_altmode { |
| struct device *dev; |
| |
| unsigned int owner_id; |
| |
| /* To synchronize WRITE_REQ acks */ |
| struct mutex lock; |
| |
| struct completion pan_ack; |
| struct pmic_glink_client *client; |
| |
| struct work_struct enable_work; |
| |
| struct pmic_glink_altmode_port ports[PMIC_GLINK_MAX_PORTS]; |
| }; |
| |
| static int pmic_glink_altmode_request(struct pmic_glink_altmode *altmode, u32 cmd, u32 arg) |
| { |
| struct usbc_write_req req = {}; |
| unsigned long left; |
| int ret; |
| |
| /* |
| * The USBC_CMD_WRITE_REQ ack doesn't identify the request, so wait for |
| * one ack at a time. |
| */ |
| mutex_lock(&altmode->lock); |
| |
| req.hdr.owner = cpu_to_le32(altmode->owner_id); |
| req.hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP); |
| req.hdr.opcode = cpu_to_le32(USBC_CMD_WRITE_REQ); |
| req.cmd = cpu_to_le32(cmd); |
| req.arg = cpu_to_le32(arg); |
| |
| ret = pmic_glink_send(altmode->client, &req, sizeof(req)); |
| if (ret) { |
| dev_err(altmode->dev, "failed to send altmode request: %#x (%d)\n", cmd, ret); |
| goto out_unlock; |
| } |
| |
| left = wait_for_completion_timeout(&altmode->pan_ack, 5 * HZ); |
| if (!left) { |
| dev_err(altmode->dev, "timeout waiting for altmode request ack for: %#x\n", cmd); |
| ret = -ETIMEDOUT; |
| } |
| |
| out_unlock: |
| mutex_unlock(&altmode->lock); |
| return ret; |
| } |
| |
| static void pmic_glink_altmode_enable_dp(struct pmic_glink_altmode *altmode, |
| struct pmic_glink_altmode_port *port, |
| u8 mode, bool hpd_state, |
| bool hpd_irq) |
| { |
| struct typec_displayport_data dp_data = {}; |
| int ret; |
| |
| dp_data.status = DP_STATUS_ENABLED; |
| if (hpd_state) |
| dp_data.status |= DP_STATUS_HPD_STATE; |
| if (hpd_irq) |
| dp_data.status |= DP_STATUS_IRQ_HPD; |
| dp_data.conf = DP_CONF_SET_PIN_ASSIGN(mode); |
| |
| port->state.alt = &port->dp_alt; |
| port->state.data = &dp_data; |
| port->state.mode = TYPEC_MODAL_STATE(mode); |
| |
| ret = typec_mux_set(port->typec_mux, &port->state); |
| if (ret) |
| dev_err(altmode->dev, "failed to switch mux to DP\n"); |
| } |
| |
| static void pmic_glink_altmode_enable_usb(struct pmic_glink_altmode *altmode, |
| struct pmic_glink_altmode_port *port) |
| { |
| int ret; |
| |
| port->state.alt = NULL; |
| port->state.data = NULL; |
| port->state.mode = TYPEC_STATE_USB; |
| |
| ret = typec_mux_set(port->typec_mux, &port->state); |
| if (ret) |
| dev_err(altmode->dev, "failed to switch mux to USB\n"); |
| } |
| |
| static void pmic_glink_altmode_worker(struct work_struct *work) |
| { |
| struct pmic_glink_altmode_port *alt_port = work_to_altmode_port(work); |
| struct pmic_glink_altmode *altmode = alt_port->altmode; |
| |
| typec_switch_set(alt_port->typec_switch, alt_port->orientation); |
| |
| if (alt_port->svid == USB_TYPEC_DP_SID) |
| pmic_glink_altmode_enable_dp(altmode, alt_port, alt_port->mode, |
| alt_port->hpd_state, alt_port->hpd_irq); |
| else |
| pmic_glink_altmode_enable_usb(altmode, alt_port); |
| |
| if (alt_port->hpd_state) |
| drm_bridge_hpd_notify(&alt_port->bridge, connector_status_connected); |
| else |
| drm_bridge_hpd_notify(&alt_port->bridge, connector_status_disconnected); |
| |
| pmic_glink_altmode_request(altmode, ALTMODE_PAN_ACK, alt_port->index); |
| }; |
| |
| static enum typec_orientation pmic_glink_altmode_orientation(unsigned int orientation) |
| { |
| if (orientation == 0) |
| return TYPEC_ORIENTATION_NORMAL; |
| else if (orientation == 1) |
| return TYPEC_ORIENTATION_REVERSE; |
| else |
| return TYPEC_ORIENTATION_NONE; |
| } |
| |
| #define SC8180X_PORT_MASK 0x000000ff |
| #define SC8180X_ORIENTATION_MASK 0x0000ff00 |
| #define SC8180X_MUX_MASK 0x00ff0000 |
| #define SC8180X_MODE_MASK 0x3f000000 |
| #define SC8180X_HPD_STATE_MASK 0x40000000 |
| #define SC8180X_HPD_IRQ_MASK 0x80000000 |
| |
| static void pmic_glink_altmode_sc8180xp_notify(struct pmic_glink_altmode *altmode, |
| const void *data, size_t len) |
| { |
| struct pmic_glink_altmode_port *alt_port; |
| const struct usbc_sc8180x_notify *msg; |
| u32 notification; |
| u8 orientation; |
| u8 hpd_state; |
| u8 hpd_irq; |
| u16 svid; |
| u8 port; |
| u8 mode; |
| u8 mux; |
| |
| if (len != sizeof(*msg)) { |
| dev_warn(altmode->dev, "invalid length of USBC_NOTIFY indication: %zd\n", len); |
| return; |
| } |
| |
| msg = data; |
| notification = le32_to_cpu(msg->notification); |
| port = FIELD_GET(SC8180X_PORT_MASK, notification); |
| orientation = FIELD_GET(SC8180X_ORIENTATION_MASK, notification); |
| mux = FIELD_GET(SC8180X_MUX_MASK, notification); |
| mode = FIELD_GET(SC8180X_MODE_MASK, notification); |
| hpd_state = FIELD_GET(SC8180X_HPD_STATE_MASK, notification); |
| hpd_irq = FIELD_GET(SC8180X_HPD_IRQ_MASK, notification); |
| |
| svid = mux == 2 ? USB_TYPEC_DP_SID : 0; |
| |
| if (!altmode->ports[port].altmode) { |
| dev_dbg(altmode->dev, "notification on undefined port %d\n", port); |
| return; |
| } |
| |
| alt_port = &altmode->ports[port]; |
| alt_port->orientation = pmic_glink_altmode_orientation(orientation); |
| alt_port->svid = svid; |
| alt_port->mode = mode; |
| alt_port->hpd_state = hpd_state; |
| alt_port->hpd_irq = hpd_irq; |
| schedule_work(&alt_port->work); |
| } |
| |
| #define SC8280XP_DPAM_MASK 0x3f |
| #define SC8280XP_HPD_STATE_MASK BIT(6) |
| #define SC8280XP_HPD_IRQ_MASK BIT(7) |
| |
| static void pmic_glink_altmode_sc8280xp_notify(struct pmic_glink_altmode *altmode, |
| u16 svid, const void *data, size_t len) |
| { |
| struct pmic_glink_altmode_port *alt_port; |
| const struct usbc_notify *notify; |
| u8 orientation; |
| u8 hpd_state; |
| u8 hpd_irq; |
| u8 mode; |
| u8 port; |
| |
| if (len != sizeof(*notify)) { |
| dev_warn(altmode->dev, "invalid length USBC_NOTIFY_IND: %zd\n", |
| len); |
| return; |
| } |
| |
| notify = data; |
| |
| port = notify->payload[0]; |
| orientation = notify->payload[1]; |
| mode = FIELD_GET(SC8280XP_DPAM_MASK, notify->payload[8]) - DPAM_HPD_A; |
| hpd_state = FIELD_GET(SC8280XP_HPD_STATE_MASK, notify->payload[8]); |
| hpd_irq = FIELD_GET(SC8280XP_HPD_IRQ_MASK, notify->payload[8]); |
| |
| if (!altmode->ports[port].altmode) { |
| dev_dbg(altmode->dev, "notification on undefined port %d\n", port); |
| return; |
| } |
| |
| alt_port = &altmode->ports[port]; |
| alt_port->orientation = pmic_glink_altmode_orientation(orientation); |
| alt_port->svid = svid; |
| alt_port->mode = mode; |
| alt_port->hpd_state = hpd_state; |
| alt_port->hpd_irq = hpd_irq; |
| schedule_work(&alt_port->work); |
| } |
| |
| static void pmic_glink_altmode_callback(const void *data, size_t len, void *priv) |
| { |
| struct pmic_glink_altmode *altmode = priv; |
| const struct pmic_glink_hdr *hdr = data; |
| u16 opcode; |
| u16 svid; |
| |
| opcode = le32_to_cpu(hdr->opcode) & 0xff; |
| svid = le32_to_cpu(hdr->opcode) >> 16; |
| |
| switch (opcode) { |
| case USBC_CMD_WRITE_REQ: |
| complete(&altmode->pan_ack); |
| break; |
| case USBC_NOTIFY_IND: |
| pmic_glink_altmode_sc8280xp_notify(altmode, svid, data, len); |
| break; |
| case USBC_SC8180X_NOTIFY_IND: |
| pmic_glink_altmode_sc8180xp_notify(altmode, data, len); |
| break; |
| } |
| } |
| |
| static int pmic_glink_altmode_attach(struct drm_bridge *bridge, |
| enum drm_bridge_attach_flags flags) |
| { |
| return flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR ? 0 : -EINVAL; |
| } |
| |
| static const struct drm_bridge_funcs pmic_glink_altmode_bridge_funcs = { |
| .attach = pmic_glink_altmode_attach, |
| }; |
| |
| static void pmic_glink_altmode_put_mux(void *data) |
| { |
| typec_mux_put(data); |
| } |
| |
| static void pmic_glink_altmode_put_switch(void *data) |
| { |
| typec_switch_put(data); |
| } |
| |
| static void pmic_glink_altmode_enable_worker(struct work_struct *work) |
| { |
| struct pmic_glink_altmode *altmode = work_to_altmode(work); |
| int ret; |
| |
| ret = pmic_glink_altmode_request(altmode, ALTMODE_PAN_EN, 0); |
| if (ret) |
| dev_err(altmode->dev, "failed to request altmode notifications\n"); |
| } |
| |
| static void pmic_glink_altmode_pdr_notify(void *priv, int state) |
| { |
| struct pmic_glink_altmode *altmode = priv; |
| |
| if (state == SERVREG_SERVICE_STATE_UP) |
| schedule_work(&altmode->enable_work); |
| } |
| |
| static const struct of_device_id pmic_glink_altmode_of_quirks[] = { |
| { .compatible = "qcom,sc8180x-pmic-glink", .data = (void *)PMIC_GLINK_OWNER_USBC }, |
| {} |
| }; |
| |
| static int pmic_glink_altmode_probe(struct auxiliary_device *adev, |
| const struct auxiliary_device_id *id) |
| { |
| struct pmic_glink_altmode_port *alt_port; |
| struct pmic_glink_altmode *altmode; |
| struct typec_altmode_desc mux_desc = {}; |
| const struct of_device_id *match; |
| struct fwnode_handle *fwnode; |
| struct device *dev = &adev->dev; |
| u32 port; |
| int ret; |
| |
| altmode = devm_kzalloc(dev, sizeof(*altmode), GFP_KERNEL); |
| if (!altmode) |
| return -ENOMEM; |
| |
| altmode->dev = dev; |
| |
| match = of_match_device(pmic_glink_altmode_of_quirks, dev->parent); |
| if (match) |
| altmode->owner_id = (unsigned long)match->data; |
| else |
| altmode->owner_id = PMIC_GLINK_OWNER_USBC_PAN; |
| |
| INIT_WORK(&altmode->enable_work, pmic_glink_altmode_enable_worker); |
| init_completion(&altmode->pan_ack); |
| mutex_init(&altmode->lock); |
| |
| device_for_each_child_node(dev, fwnode) { |
| ret = fwnode_property_read_u32(fwnode, "reg", &port); |
| if (ret < 0) { |
| dev_err(dev, "missing reg property of %pOFn\n", fwnode); |
| return ret; |
| } |
| |
| if (port >= ARRAY_SIZE(altmode->ports)) { |
| dev_warn(dev, "invalid connector number, ignoring\n"); |
| continue; |
| } |
| |
| if (altmode->ports[port].altmode) { |
| dev_err(dev, "multiple connector definition for port %u\n", port); |
| return -EINVAL; |
| } |
| |
| alt_port = &altmode->ports[port]; |
| alt_port->altmode = altmode; |
| alt_port->index = port; |
| INIT_WORK(&alt_port->work, pmic_glink_altmode_worker); |
| |
| alt_port->bridge.funcs = &pmic_glink_altmode_bridge_funcs; |
| alt_port->bridge.of_node = to_of_node(fwnode); |
| alt_port->bridge.ops = DRM_BRIDGE_OP_HPD; |
| alt_port->bridge.type = DRM_MODE_CONNECTOR_USB; |
| |
| ret = devm_drm_bridge_add(dev, &alt_port->bridge); |
| if (ret) |
| return ret; |
| |
| alt_port->dp_alt.svid = USB_TYPEC_DP_SID; |
| alt_port->dp_alt.mode = USB_TYPEC_DP_MODE; |
| alt_port->dp_alt.active = 1; |
| |
| mux_desc.svid = USB_TYPEC_DP_SID; |
| mux_desc.mode = USB_TYPEC_DP_MODE; |
| alt_port->typec_mux = fwnode_typec_mux_get(fwnode, &mux_desc); |
| if (IS_ERR(alt_port->typec_mux)) |
| return dev_err_probe(dev, PTR_ERR(alt_port->typec_mux), |
| "failed to acquire mode-switch for port: %d\n", |
| port); |
| |
| ret = devm_add_action_or_reset(dev, pmic_glink_altmode_put_mux, |
| alt_port->typec_mux); |
| if (ret) |
| return ret; |
| |
| alt_port->typec_switch = fwnode_typec_switch_get(fwnode); |
| if (IS_ERR(alt_port->typec_switch)) |
| return dev_err_probe(dev, PTR_ERR(alt_port->typec_switch), |
| "failed to acquire orientation-switch for port: %d\n", |
| port); |
| |
| ret = devm_add_action_or_reset(dev, pmic_glink_altmode_put_switch, |
| alt_port->typec_switch); |
| if (ret) |
| return ret; |
| } |
| |
| altmode->client = devm_pmic_glink_register_client(dev, |
| altmode->owner_id, |
| pmic_glink_altmode_callback, |
| pmic_glink_altmode_pdr_notify, |
| altmode); |
| return PTR_ERR_OR_ZERO(altmode->client); |
| } |
| |
| static const struct auxiliary_device_id pmic_glink_altmode_id_table[] = { |
| { .name = "pmic_glink.altmode", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(auxiliary, pmic_glink_altmode_id_table); |
| |
| static struct auxiliary_driver pmic_glink_altmode_driver = { |
| .name = "pmic_glink_altmode", |
| .probe = pmic_glink_altmode_probe, |
| .id_table = pmic_glink_altmode_id_table, |
| }; |
| |
| module_auxiliary_driver(pmic_glink_altmode_driver); |
| |
| MODULE_DESCRIPTION("Qualcomm PMIC GLINK Altmode driver"); |
| MODULE_LICENSE("GPL"); |