| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Processor thermal device for newer processors |
| * Copyright (c) 2020, Intel Corporation. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/thermal.h> |
| |
| #include "int340x_thermal_zone.h" |
| #include "processor_thermal_device.h" |
| |
| #define DRV_NAME "proc_thermal_pci" |
| |
| struct proc_thermal_pci { |
| struct pci_dev *pdev; |
| struct proc_thermal_device *proc_priv; |
| struct thermal_zone_device *tzone; |
| struct delayed_work work; |
| int stored_thres; |
| int no_legacy; |
| }; |
| |
| enum proc_thermal_mmio_type { |
| PROC_THERMAL_MMIO_TJMAX, |
| PROC_THERMAL_MMIO_PP0_TEMP, |
| PROC_THERMAL_MMIO_PP1_TEMP, |
| PROC_THERMAL_MMIO_PKG_TEMP, |
| PROC_THERMAL_MMIO_THRES_0, |
| PROC_THERMAL_MMIO_THRES_1, |
| PROC_THERMAL_MMIO_INT_ENABLE_0, |
| PROC_THERMAL_MMIO_INT_ENABLE_1, |
| PROC_THERMAL_MMIO_INT_STATUS_0, |
| PROC_THERMAL_MMIO_INT_STATUS_1, |
| PROC_THERMAL_MMIO_MAX |
| }; |
| |
| struct proc_thermal_mmio_info { |
| enum proc_thermal_mmio_type mmio_type; |
| u64 mmio_addr; |
| u64 shift; |
| u64 mask; |
| }; |
| |
| static struct proc_thermal_mmio_info proc_thermal_mmio_info[] = { |
| { PROC_THERMAL_MMIO_TJMAX, 0x599c, 16, 0xff }, |
| { PROC_THERMAL_MMIO_PP0_TEMP, 0x597c, 0, 0xff }, |
| { PROC_THERMAL_MMIO_PP1_TEMP, 0x5980, 0, 0xff }, |
| { PROC_THERMAL_MMIO_PKG_TEMP, 0x5978, 0, 0xff }, |
| { PROC_THERMAL_MMIO_THRES_0, 0x5820, 8, 0x7F }, |
| { PROC_THERMAL_MMIO_THRES_1, 0x5820, 16, 0x7F }, |
| { PROC_THERMAL_MMIO_INT_ENABLE_0, 0x5820, 15, 0x01 }, |
| { PROC_THERMAL_MMIO_INT_ENABLE_1, 0x5820, 23, 0x01 }, |
| { PROC_THERMAL_MMIO_INT_STATUS_0, 0x7200, 6, 0x01 }, |
| { PROC_THERMAL_MMIO_INT_STATUS_1, 0x7200, 8, 0x01 }, |
| }; |
| |
| #define B0D4_THERMAL_NOTIFY_DELAY 1000 |
| static int notify_delay_ms = B0D4_THERMAL_NOTIFY_DELAY; |
| |
| static void proc_thermal_mmio_read(struct proc_thermal_pci *pci_info, |
| enum proc_thermal_mmio_type type, |
| u32 *value) |
| { |
| *value = ioread32(((u8 __iomem *)pci_info->proc_priv->mmio_base + |
| proc_thermal_mmio_info[type].mmio_addr)); |
| *value >>= proc_thermal_mmio_info[type].shift; |
| *value &= proc_thermal_mmio_info[type].mask; |
| } |
| |
| static void proc_thermal_mmio_write(struct proc_thermal_pci *pci_info, |
| enum proc_thermal_mmio_type type, |
| u32 value) |
| { |
| u32 current_val; |
| u32 mask; |
| |
| current_val = ioread32(((u8 __iomem *)pci_info->proc_priv->mmio_base + |
| proc_thermal_mmio_info[type].mmio_addr)); |
| mask = proc_thermal_mmio_info[type].mask << proc_thermal_mmio_info[type].shift; |
| current_val &= ~mask; |
| |
| value &= proc_thermal_mmio_info[type].mask; |
| value <<= proc_thermal_mmio_info[type].shift; |
| |
| current_val |= value; |
| iowrite32(current_val, ((u8 __iomem *)pci_info->proc_priv->mmio_base + |
| proc_thermal_mmio_info[type].mmio_addr)); |
| } |
| |
| /* |
| * To avoid sending two many messages to user space, we have 1 second delay. |
| * On interrupt we are disabling interrupt and enabling after 1 second. |
| * This workload function is delayed by 1 second. |
| */ |
| static void proc_thermal_threshold_work_fn(struct work_struct *work) |
| { |
| struct delayed_work *delayed_work = to_delayed_work(work); |
| struct proc_thermal_pci *pci_info = container_of(delayed_work, |
| struct proc_thermal_pci, work); |
| struct thermal_zone_device *tzone = pci_info->tzone; |
| |
| if (tzone) |
| thermal_zone_device_update(tzone, THERMAL_TRIP_VIOLATED); |
| |
| /* Enable interrupt flag */ |
| proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 1); |
| } |
| |
| static void pkg_thermal_schedule_work(struct delayed_work *work) |
| { |
| unsigned long ms = msecs_to_jiffies(notify_delay_ms); |
| |
| schedule_delayed_work(work, ms); |
| } |
| |
| static irqreturn_t proc_thermal_irq_handler(int irq, void *devid) |
| { |
| struct proc_thermal_pci *pci_info = devid; |
| u32 status; |
| |
| proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_INT_STATUS_0, &status); |
| |
| /* Disable enable interrupt flag */ |
| proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 0); |
| pci_write_config_byte(pci_info->pdev, 0xdc, 0x01); |
| |
| pkg_thermal_schedule_work(&pci_info->work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int sys_get_curr_temp(struct thermal_zone_device *tzd, int *temp) |
| { |
| struct proc_thermal_pci *pci_info = tzd->devdata; |
| u32 _temp; |
| |
| proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_PKG_TEMP, &_temp); |
| *temp = (unsigned long)_temp * 1000; |
| |
| return 0; |
| } |
| |
| static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, int temp) |
| { |
| struct proc_thermal_pci *pci_info = tzd->devdata; |
| int tjmax, _temp; |
| |
| if (temp <= 0) { |
| cancel_delayed_work_sync(&pci_info->work); |
| proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 0); |
| proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_THRES_0, 0); |
| thermal_zone_device_disable(tzd); |
| pci_info->stored_thres = 0; |
| return 0; |
| } |
| |
| proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_TJMAX, &tjmax); |
| _temp = tjmax - (temp / 1000); |
| if (_temp < 0) |
| return -EINVAL; |
| |
| proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_THRES_0, _temp); |
| proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 1); |
| |
| pci_info->stored_thres = temp; |
| |
| return 0; |
| } |
| |
| static int get_trip_temp(struct proc_thermal_pci *pci_info) |
| { |
| int temp, tjmax; |
| |
| proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_THRES_0, &temp); |
| if (!temp) |
| return THERMAL_TEMP_INVALID; |
| |
| proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_TJMAX, &tjmax); |
| temp = (tjmax - temp) * 1000; |
| |
| return temp; |
| } |
| |
| static struct thermal_trip psv_trip = { |
| .type = THERMAL_TRIP_PASSIVE, |
| }; |
| |
| static struct thermal_zone_device_ops tzone_ops = { |
| .get_temp = sys_get_curr_temp, |
| .set_trip_temp = sys_set_trip_temp, |
| }; |
| |
| static struct thermal_zone_params tzone_params = { |
| .governor_name = "user_space", |
| .no_hwmon = true, |
| }; |
| |
| static int proc_thermal_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct proc_thermal_device *proc_priv; |
| struct proc_thermal_pci *pci_info; |
| int irq_flag = 0, irq, ret; |
| |
| proc_priv = devm_kzalloc(&pdev->dev, sizeof(*proc_priv), GFP_KERNEL); |
| if (!proc_priv) |
| return -ENOMEM; |
| |
| pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL); |
| if (!pci_info) |
| return -ENOMEM; |
| |
| pci_info->pdev = pdev; |
| ret = pcim_enable_device(pdev); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "error: could not enable device\n"); |
| return ret; |
| } |
| |
| pci_set_master(pdev); |
| |
| INIT_DELAYED_WORK(&pci_info->work, proc_thermal_threshold_work_fn); |
| |
| ret = proc_thermal_add(&pdev->dev, proc_priv); |
| if (ret) { |
| dev_err(&pdev->dev, "error: proc_thermal_add, will continue\n"); |
| pci_info->no_legacy = 1; |
| } |
| |
| proc_priv->priv_data = pci_info; |
| pci_info->proc_priv = proc_priv; |
| pci_set_drvdata(pdev, proc_priv); |
| |
| ret = proc_thermal_mmio_add(pdev, proc_priv, id->driver_data); |
| if (ret) |
| goto err_ret_thermal; |
| |
| psv_trip.temperature = get_trip_temp(pci_info); |
| |
| pci_info->tzone = thermal_zone_device_register_with_trips("TCPU_PCI", &psv_trip, |
| 1, 1, pci_info, |
| &tzone_ops, |
| &tzone_params, 0, 0); |
| if (IS_ERR(pci_info->tzone)) { |
| ret = PTR_ERR(pci_info->tzone); |
| goto err_ret_mmio; |
| } |
| |
| /* request and enable interrupt */ |
| ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to allocate vectors!\n"); |
| goto err_ret_tzone; |
| } |
| if (!pdev->msi_enabled && !pdev->msix_enabled) |
| irq_flag = IRQF_SHARED; |
| |
| irq = pci_irq_vector(pdev, 0); |
| ret = devm_request_threaded_irq(&pdev->dev, irq, |
| proc_thermal_irq_handler, NULL, |
| irq_flag, KBUILD_MODNAME, pci_info); |
| if (ret) { |
| dev_err(&pdev->dev, "Request IRQ %d failed\n", pdev->irq); |
| goto err_free_vectors; |
| } |
| |
| ret = thermal_zone_device_enable(pci_info->tzone); |
| if (ret) |
| goto err_free_vectors; |
| |
| return 0; |
| |
| err_free_vectors: |
| pci_free_irq_vectors(pdev); |
| err_ret_tzone: |
| thermal_zone_device_unregister(pci_info->tzone); |
| err_ret_mmio: |
| proc_thermal_mmio_remove(pdev, proc_priv); |
| err_ret_thermal: |
| if (!pci_info->no_legacy) |
| proc_thermal_remove(proc_priv); |
| pci_disable_device(pdev); |
| |
| return ret; |
| } |
| |
| static void proc_thermal_pci_remove(struct pci_dev *pdev) |
| { |
| struct proc_thermal_device *proc_priv = pci_get_drvdata(pdev); |
| struct proc_thermal_pci *pci_info = proc_priv->priv_data; |
| |
| cancel_delayed_work_sync(&pci_info->work); |
| |
| proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_THRES_0, 0); |
| proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 0); |
| |
| devm_free_irq(&pdev->dev, pdev->irq, pci_info); |
| pci_free_irq_vectors(pdev); |
| |
| thermal_zone_device_unregister(pci_info->tzone); |
| proc_thermal_mmio_remove(pdev, pci_info->proc_priv); |
| if (!pci_info->no_legacy) |
| proc_thermal_remove(proc_priv); |
| pci_disable_device(pdev); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int proc_thermal_pci_suspend(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct proc_thermal_device *proc_priv; |
| struct proc_thermal_pci *pci_info; |
| |
| proc_priv = pci_get_drvdata(pdev); |
| pci_info = proc_priv->priv_data; |
| |
| if (!pci_info->no_legacy) |
| return proc_thermal_suspend(dev); |
| |
| return 0; |
| } |
| static int proc_thermal_pci_resume(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct proc_thermal_device *proc_priv; |
| struct proc_thermal_pci *pci_info; |
| |
| proc_priv = pci_get_drvdata(pdev); |
| pci_info = proc_priv->priv_data; |
| |
| if (pci_info->stored_thres) { |
| proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_THRES_0, |
| pci_info->stored_thres / 1000); |
| proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 1); |
| } |
| |
| if (!pci_info->no_legacy) |
| return proc_thermal_resume(dev); |
| |
| return 0; |
| } |
| #else |
| #define proc_thermal_pci_suspend NULL |
| #define proc_thermal_pci_resume NULL |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, proc_thermal_pci_suspend, |
| proc_thermal_pci_resume); |
| |
| static const struct pci_device_id proc_thermal_pci_ids[] = { |
| { PCI_DEVICE_DATA(INTEL, ADL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) }, |
| { PCI_DEVICE_DATA(INTEL, MTLP_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) }, |
| { PCI_DEVICE_DATA(INTEL, RPL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) }, |
| { }, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, proc_thermal_pci_ids); |
| |
| static struct pci_driver proc_thermal_pci_driver = { |
| .name = DRV_NAME, |
| .probe = proc_thermal_pci_probe, |
| .remove = proc_thermal_pci_remove, |
| .id_table = proc_thermal_pci_ids, |
| .driver.pm = &proc_thermal_pci_pm, |
| }; |
| |
| module_pci_driver(proc_thermal_pci_driver); |
| |
| MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); |
| MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver"); |
| MODULE_LICENSE("GPL v2"); |