blob: f553b317e6b2a55e3155ac603f898b7a746f3247 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* dts file for Xilinx ZynqMP zc1751-xm017-dc3
*
* (C) Copyright 2016 - 2021, Xilinx, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
/dts-v1/;
#include "zynqmp.dtsi"
#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/phy/phy.h>
/ {
model = "ZynqMP zc1751-xm017-dc3 RevA";
compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
aliases {
ethernet0 = &gem0;
i2c0 = &i2c0;
i2c1 = &i2c1;
mmc0 = &sdhci1;
rtc0 = &rtc;
serial0 = &uart0;
serial1 = &uart1;
usb0 = &usb0;
usb1 = &usb1;
};
chosen {
bootargs = "earlycon";
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
};
clock_si5338_2: clk26 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
};
clock_si5338_3: clk125 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
};
};
&fpd_dma_chan1 {
status = "okay";
};
&fpd_dma_chan2 {
status = "okay";
};
&fpd_dma_chan3 {
status = "okay";
};
&fpd_dma_chan4 {
status = "okay";
};
&fpd_dma_chan5 {
status = "okay";
};
&fpd_dma_chan6 {
status = "okay";
};
&fpd_dma_chan7 {
status = "okay";
};
&fpd_dma_chan8 {
status = "okay";
};
&gem0 {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 { /* VSC8211 */
reg = <0>;
};
};
};
&gpio {
status = "okay";
};
/* just eeprom here */
&i2c0 {
status = "okay";
clock-frequency = <400000>;
tca6416_u26: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
/* IRQ not connected */
};
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
/* eeprom24c02 and SE98A temp chip pca9306 */
&i2c1 {
status = "okay";
clock-frequency = <400000>;
};
/* MT29F64G08AECDBJ4-6 */
&nand0 {
status = "okay";
arasan,has-mdma;
num-cs = <2>;
};
&psgtr {
status = "okay";
/* usb3, sata */
clocks = <&clock_si5338_2>, <&clock_si5338_3>;
clock-names = "ref2", "ref3";
};
&rtc {
status = "okay";
};
&sata {
status = "okay";
/* SATA phy OOB timing settings */
ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
phy-names = "sata-phy";
phys = <&psgtr 2 PHY_TYPE_SATA 0 3>;
};
&sdhci1 { /* emmc with some settings */
status = "okay";
};
/* main */
&uart0 {
status = "okay";
};
/* DB9 */
&uart1 {
status = "okay";
};
&usb0 {
status = "okay";
phy-names = "usb3-phy";
phys = <&psgtr 0 PHY_TYPE_USB3 0 2>;
};
&dwc3_0 {
status = "okay";
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
};
/* ULPI SMSC USB3320 */
&usb1 {
status = "okay";
phy-names = "usb3-phy";
phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
};
&dwc3_1 {
status = "okay";
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
};