| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * x86 instruction analysis |
| * |
| * Copyright (C) IBM Corporation, 2002, 2004, 2009 |
| */ |
| |
| #include <linux/kernel.h> |
| #ifdef __KERNEL__ |
| #include <linux/string.h> |
| #else |
| #include <string.h> |
| #endif |
| #include <asm/inat.h> /*__ignore_sync_check__ */ |
| #include <asm/insn.h> /* __ignore_sync_check__ */ |
| #include <asm/unaligned.h> /* __ignore_sync_check__ */ |
| |
| #include <linux/errno.h> |
| #include <linux/kconfig.h> |
| |
| #include <asm/emulate_prefix.h> /* __ignore_sync_check__ */ |
| |
| #define leXX_to_cpu(t, r) \ |
| ({ \ |
| __typeof__(t) v; \ |
| switch (sizeof(t)) { \ |
| case 4: v = le32_to_cpu(r); break; \ |
| case 2: v = le16_to_cpu(r); break; \ |
| case 1: v = r; break; \ |
| default: \ |
| BUILD_BUG(); break; \ |
| } \ |
| v; \ |
| }) |
| |
| /* Verify next sizeof(t) bytes can be on the same instruction */ |
| #define validate_next(t, insn, n) \ |
| ((insn)->next_byte + sizeof(t) + n <= (insn)->end_kaddr) |
| |
| #define __get_next(t, insn) \ |
| ({ t r = get_unaligned((t *)(insn)->next_byte); (insn)->next_byte += sizeof(t); leXX_to_cpu(t, r); }) |
| |
| #define __peek_nbyte_next(t, insn, n) \ |
| ({ t r = get_unaligned((t *)(insn)->next_byte + n); leXX_to_cpu(t, r); }) |
| |
| #define get_next(t, insn) \ |
| ({ if (unlikely(!validate_next(t, insn, 0))) goto err_out; __get_next(t, insn); }) |
| |
| #define peek_nbyte_next(t, insn, n) \ |
| ({ if (unlikely(!validate_next(t, insn, n))) goto err_out; __peek_nbyte_next(t, insn, n); }) |
| |
| #define peek_next(t, insn) peek_nbyte_next(t, insn, 0) |
| |
| /** |
| * insn_init() - initialize struct insn |
| * @insn: &struct insn to be initialized |
| * @kaddr: address (in kernel memory) of instruction (or copy thereof) |
| * @buf_len: length of the insn buffer at @kaddr |
| * @x86_64: !0 for 64-bit kernel or 64-bit app |
| */ |
| void insn_init(struct insn *insn, const void *kaddr, int buf_len, int x86_64) |
| { |
| /* |
| * Instructions longer than MAX_INSN_SIZE (15 bytes) are invalid |
| * even if the input buffer is long enough to hold them. |
| */ |
| if (buf_len > MAX_INSN_SIZE) |
| buf_len = MAX_INSN_SIZE; |
| |
| memset(insn, 0, sizeof(*insn)); |
| insn->kaddr = kaddr; |
| insn->end_kaddr = kaddr + buf_len; |
| insn->next_byte = kaddr; |
| insn->x86_64 = x86_64 ? 1 : 0; |
| insn->opnd_bytes = 4; |
| if (x86_64) |
| insn->addr_bytes = 8; |
| else |
| insn->addr_bytes = 4; |
| } |
| |
| static const insn_byte_t xen_prefix[] = { __XEN_EMULATE_PREFIX }; |
| static const insn_byte_t kvm_prefix[] = { __KVM_EMULATE_PREFIX }; |
| |
| static int __insn_get_emulate_prefix(struct insn *insn, |
| const insn_byte_t *prefix, size_t len) |
| { |
| size_t i; |
| |
| for (i = 0; i < len; i++) { |
| if (peek_nbyte_next(insn_byte_t, insn, i) != prefix[i]) |
| goto err_out; |
| } |
| |
| insn->emulate_prefix_size = len; |
| insn->next_byte += len; |
| |
| return 1; |
| |
| err_out: |
| return 0; |
| } |
| |
| static void insn_get_emulate_prefix(struct insn *insn) |
| { |
| if (__insn_get_emulate_prefix(insn, xen_prefix, sizeof(xen_prefix))) |
| return; |
| |
| __insn_get_emulate_prefix(insn, kvm_prefix, sizeof(kvm_prefix)); |
| } |
| |
| /** |
| * insn_get_prefixes - scan x86 instruction prefix bytes |
| * @insn: &struct insn containing instruction |
| * |
| * Populates the @insn->prefixes bitmap, and updates @insn->next_byte |
| * to point to the (first) opcode. No effect if @insn->prefixes.got |
| * is already set. |
| * |
| * * Returns: |
| * 0: on success |
| * < 0: on error |
| */ |
| int insn_get_prefixes(struct insn *insn) |
| { |
| struct insn_field *prefixes = &insn->prefixes; |
| insn_attr_t attr; |
| insn_byte_t b, lb; |
| int i, nb; |
| |
| if (prefixes->got) |
| return 0; |
| |
| insn_get_emulate_prefix(insn); |
| |
| nb = 0; |
| lb = 0; |
| b = peek_next(insn_byte_t, insn); |
| attr = inat_get_opcode_attribute(b); |
| while (inat_is_legacy_prefix(attr)) { |
| /* Skip if same prefix */ |
| for (i = 0; i < nb; i++) |
| if (prefixes->bytes[i] == b) |
| goto found; |
| if (nb == 4) |
| /* Invalid instruction */ |
| break; |
| prefixes->bytes[nb++] = b; |
| if (inat_is_address_size_prefix(attr)) { |
| /* address size switches 2/4 or 4/8 */ |
| if (insn->x86_64) |
| insn->addr_bytes ^= 12; |
| else |
| insn->addr_bytes ^= 6; |
| } else if (inat_is_operand_size_prefix(attr)) { |
| /* oprand size switches 2/4 */ |
| insn->opnd_bytes ^= 6; |
| } |
| found: |
| prefixes->nbytes++; |
| insn->next_byte++; |
| lb = b; |
| b = peek_next(insn_byte_t, insn); |
| attr = inat_get_opcode_attribute(b); |
| } |
| /* Set the last prefix */ |
| if (lb && lb != insn->prefixes.bytes[3]) { |
| if (unlikely(insn->prefixes.bytes[3])) { |
| /* Swap the last prefix */ |
| b = insn->prefixes.bytes[3]; |
| for (i = 0; i < nb; i++) |
| if (prefixes->bytes[i] == lb) |
| insn_set_byte(prefixes, i, b); |
| } |
| insn_set_byte(&insn->prefixes, 3, lb); |
| } |
| |
| /* Decode REX prefix */ |
| if (insn->x86_64) { |
| b = peek_next(insn_byte_t, insn); |
| attr = inat_get_opcode_attribute(b); |
| if (inat_is_rex_prefix(attr)) { |
| insn_field_set(&insn->rex_prefix, b, 1); |
| insn->next_byte++; |
| if (X86_REX_W(b)) |
| /* REX.W overrides opnd_size */ |
| insn->opnd_bytes = 8; |
| } |
| } |
| insn->rex_prefix.got = 1; |
| |
| /* Decode VEX prefix */ |
| b = peek_next(insn_byte_t, insn); |
| attr = inat_get_opcode_attribute(b); |
| if (inat_is_vex_prefix(attr)) { |
| insn_byte_t b2 = peek_nbyte_next(insn_byte_t, insn, 1); |
| if (!insn->x86_64) { |
| /* |
| * In 32-bits mode, if the [7:6] bits (mod bits of |
| * ModRM) on the second byte are not 11b, it is |
| * LDS or LES or BOUND. |
| */ |
| if (X86_MODRM_MOD(b2) != 3) |
| goto vex_end; |
| } |
| insn_set_byte(&insn->vex_prefix, 0, b); |
| insn_set_byte(&insn->vex_prefix, 1, b2); |
| if (inat_is_evex_prefix(attr)) { |
| b2 = peek_nbyte_next(insn_byte_t, insn, 2); |
| insn_set_byte(&insn->vex_prefix, 2, b2); |
| b2 = peek_nbyte_next(insn_byte_t, insn, 3); |
| insn_set_byte(&insn->vex_prefix, 3, b2); |
| insn->vex_prefix.nbytes = 4; |
| insn->next_byte += 4; |
| if (insn->x86_64 && X86_VEX_W(b2)) |
| /* VEX.W overrides opnd_size */ |
| insn->opnd_bytes = 8; |
| } else if (inat_is_vex3_prefix(attr)) { |
| b2 = peek_nbyte_next(insn_byte_t, insn, 2); |
| insn_set_byte(&insn->vex_prefix, 2, b2); |
| insn->vex_prefix.nbytes = 3; |
| insn->next_byte += 3; |
| if (insn->x86_64 && X86_VEX_W(b2)) |
| /* VEX.W overrides opnd_size */ |
| insn->opnd_bytes = 8; |
| } else { |
| /* |
| * For VEX2, fake VEX3-like byte#2. |
| * Makes it easier to decode vex.W, vex.vvvv, |
| * vex.L and vex.pp. Masking with 0x7f sets vex.W == 0. |
| */ |
| insn_set_byte(&insn->vex_prefix, 2, b2 & 0x7f); |
| insn->vex_prefix.nbytes = 2; |
| insn->next_byte += 2; |
| } |
| } |
| vex_end: |
| insn->vex_prefix.got = 1; |
| |
| prefixes->got = 1; |
| |
| return 0; |
| |
| err_out: |
| return -ENODATA; |
| } |
| |
| /** |
| * insn_get_opcode - collect opcode(s) |
| * @insn: &struct insn containing instruction |
| * |
| * Populates @insn->opcode, updates @insn->next_byte to point past the |
| * opcode byte(s), and set @insn->attr (except for groups). |
| * If necessary, first collects any preceding (prefix) bytes. |
| * Sets @insn->opcode.value = opcode1. No effect if @insn->opcode.got |
| * is already 1. |
| * |
| * Returns: |
| * 0: on success |
| * < 0: on error |
| */ |
| int insn_get_opcode(struct insn *insn) |
| { |
| struct insn_field *opcode = &insn->opcode; |
| int pfx_id, ret; |
| insn_byte_t op; |
| |
| if (opcode->got) |
| return 0; |
| |
| if (!insn->prefixes.got) { |
| ret = insn_get_prefixes(insn); |
| if (ret) |
| return ret; |
| } |
| |
| /* Get first opcode */ |
| op = get_next(insn_byte_t, insn); |
| insn_set_byte(opcode, 0, op); |
| opcode->nbytes = 1; |
| |
| /* Check if there is VEX prefix or not */ |
| if (insn_is_avx(insn)) { |
| insn_byte_t m, p; |
| m = insn_vex_m_bits(insn); |
| p = insn_vex_p_bits(insn); |
| insn->attr = inat_get_avx_attribute(op, m, p); |
| if ((inat_must_evex(insn->attr) && !insn_is_evex(insn)) || |
| (!inat_accept_vex(insn->attr) && |
| !inat_is_group(insn->attr))) { |
| /* This instruction is bad */ |
| insn->attr = 0; |
| return -EINVAL; |
| } |
| /* VEX has only 1 byte for opcode */ |
| goto end; |
| } |
| |
| insn->attr = inat_get_opcode_attribute(op); |
| while (inat_is_escape(insn->attr)) { |
| /* Get escaped opcode */ |
| op = get_next(insn_byte_t, insn); |
| opcode->bytes[opcode->nbytes++] = op; |
| pfx_id = insn_last_prefix_id(insn); |
| insn->attr = inat_get_escape_attribute(op, pfx_id, insn->attr); |
| } |
| |
| if (inat_must_vex(insn->attr)) { |
| /* This instruction is bad */ |
| insn->attr = 0; |
| return -EINVAL; |
| } |
| end: |
| opcode->got = 1; |
| return 0; |
| |
| err_out: |
| return -ENODATA; |
| } |
| |
| /** |
| * insn_get_modrm - collect ModRM byte, if any |
| * @insn: &struct insn containing instruction |
| * |
| * Populates @insn->modrm and updates @insn->next_byte to point past the |
| * ModRM byte, if any. If necessary, first collects the preceding bytes |
| * (prefixes and opcode(s)). No effect if @insn->modrm.got is already 1. |
| * |
| * Returns: |
| * 0: on success |
| * < 0: on error |
| */ |
| int insn_get_modrm(struct insn *insn) |
| { |
| struct insn_field *modrm = &insn->modrm; |
| insn_byte_t pfx_id, mod; |
| int ret; |
| |
| if (modrm->got) |
| return 0; |
| |
| if (!insn->opcode.got) { |
| ret = insn_get_opcode(insn); |
| if (ret) |
| return ret; |
| } |
| |
| if (inat_has_modrm(insn->attr)) { |
| mod = get_next(insn_byte_t, insn); |
| insn_field_set(modrm, mod, 1); |
| if (inat_is_group(insn->attr)) { |
| pfx_id = insn_last_prefix_id(insn); |
| insn->attr = inat_get_group_attribute(mod, pfx_id, |
| insn->attr); |
| if (insn_is_avx(insn) && !inat_accept_vex(insn->attr)) { |
| /* Bad insn */ |
| insn->attr = 0; |
| return -EINVAL; |
| } |
| } |
| } |
| |
| if (insn->x86_64 && inat_is_force64(insn->attr)) |
| insn->opnd_bytes = 8; |
| |
| modrm->got = 1; |
| return 0; |
| |
| err_out: |
| return -ENODATA; |
| } |
| |
| |
| /** |
| * insn_rip_relative() - Does instruction use RIP-relative addressing mode? |
| * @insn: &struct insn containing instruction |
| * |
| * If necessary, first collects the instruction up to and including the |
| * ModRM byte. No effect if @insn->x86_64 is 0. |
| */ |
| int insn_rip_relative(struct insn *insn) |
| { |
| struct insn_field *modrm = &insn->modrm; |
| int ret; |
| |
| if (!insn->x86_64) |
| return 0; |
| |
| if (!modrm->got) { |
| ret = insn_get_modrm(insn); |
| if (ret) |
| return 0; |
| } |
| /* |
| * For rip-relative instructions, the mod field (top 2 bits) |
| * is zero and the r/m field (bottom 3 bits) is 0x5. |
| */ |
| return (modrm->nbytes && (modrm->bytes[0] & 0xc7) == 0x5); |
| } |
| |
| /** |
| * insn_get_sib() - Get the SIB byte of instruction |
| * @insn: &struct insn containing instruction |
| * |
| * If necessary, first collects the instruction up to and including the |
| * ModRM byte. |
| * |
| * Returns: |
| * 0: if decoding succeeded |
| * < 0: otherwise. |
| */ |
| int insn_get_sib(struct insn *insn) |
| { |
| insn_byte_t modrm; |
| int ret; |
| |
| if (insn->sib.got) |
| return 0; |
| |
| if (!insn->modrm.got) { |
| ret = insn_get_modrm(insn); |
| if (ret) |
| return ret; |
| } |
| |
| if (insn->modrm.nbytes) { |
| modrm = insn->modrm.bytes[0]; |
| if (insn->addr_bytes != 2 && |
| X86_MODRM_MOD(modrm) != 3 && X86_MODRM_RM(modrm) == 4) { |
| insn_field_set(&insn->sib, |
| get_next(insn_byte_t, insn), 1); |
| } |
| } |
| insn->sib.got = 1; |
| |
| return 0; |
| |
| err_out: |
| return -ENODATA; |
| } |
| |
| |
| /** |
| * insn_get_displacement() - Get the displacement of instruction |
| * @insn: &struct insn containing instruction |
| * |
| * If necessary, first collects the instruction up to and including the |
| * SIB byte. |
| * Displacement value is sign-expanded. |
| * |
| * * Returns: |
| * 0: if decoding succeeded |
| * < 0: otherwise. |
| */ |
| int insn_get_displacement(struct insn *insn) |
| { |
| insn_byte_t mod, rm, base; |
| int ret; |
| |
| if (insn->displacement.got) |
| return 0; |
| |
| if (!insn->sib.got) { |
| ret = insn_get_sib(insn); |
| if (ret) |
| return ret; |
| } |
| |
| if (insn->modrm.nbytes) { |
| /* |
| * Interpreting the modrm byte: |
| * mod = 00 - no displacement fields (exceptions below) |
| * mod = 01 - 1-byte displacement field |
| * mod = 10 - displacement field is 4 bytes, or 2 bytes if |
| * address size = 2 (0x67 prefix in 32-bit mode) |
| * mod = 11 - no memory operand |
| * |
| * If address size = 2... |
| * mod = 00, r/m = 110 - displacement field is 2 bytes |
| * |
| * If address size != 2... |
| * mod != 11, r/m = 100 - SIB byte exists |
| * mod = 00, SIB base = 101 - displacement field is 4 bytes |
| * mod = 00, r/m = 101 - rip-relative addressing, displacement |
| * field is 4 bytes |
| */ |
| mod = X86_MODRM_MOD(insn->modrm.value); |
| rm = X86_MODRM_RM(insn->modrm.value); |
| base = X86_SIB_BASE(insn->sib.value); |
| if (mod == 3) |
| goto out; |
| if (mod == 1) { |
| insn_field_set(&insn->displacement, |
| get_next(signed char, insn), 1); |
| } else if (insn->addr_bytes == 2) { |
| if ((mod == 0 && rm == 6) || mod == 2) { |
| insn_field_set(&insn->displacement, |
| get_next(short, insn), 2); |
| } |
| } else { |
| if ((mod == 0 && rm == 5) || mod == 2 || |
| (mod == 0 && base == 5)) { |
| insn_field_set(&insn->displacement, |
| get_next(int, insn), 4); |
| } |
| } |
| } |
| out: |
| insn->displacement.got = 1; |
| return 0; |
| |
| err_out: |
| return -ENODATA; |
| } |
| |
| /* Decode moffset16/32/64. Return 0 if failed */ |
| static int __get_moffset(struct insn *insn) |
| { |
| switch (insn->addr_bytes) { |
| case 2: |
| insn_field_set(&insn->moffset1, get_next(short, insn), 2); |
| break; |
| case 4: |
| insn_field_set(&insn->moffset1, get_next(int, insn), 4); |
| break; |
| case 8: |
| insn_field_set(&insn->moffset1, get_next(int, insn), 4); |
| insn_field_set(&insn->moffset2, get_next(int, insn), 4); |
| break; |
| default: /* opnd_bytes must be modified manually */ |
| goto err_out; |
| } |
| insn->moffset1.got = insn->moffset2.got = 1; |
| |
| return 1; |
| |
| err_out: |
| return 0; |
| } |
| |
| /* Decode imm v32(Iz). Return 0 if failed */ |
| static int __get_immv32(struct insn *insn) |
| { |
| switch (insn->opnd_bytes) { |
| case 2: |
| insn_field_set(&insn->immediate, get_next(short, insn), 2); |
| break; |
| case 4: |
| case 8: |
| insn_field_set(&insn->immediate, get_next(int, insn), 4); |
| break; |
| default: /* opnd_bytes must be modified manually */ |
| goto err_out; |
| } |
| |
| return 1; |
| |
| err_out: |
| return 0; |
| } |
| |
| /* Decode imm v64(Iv/Ov), Return 0 if failed */ |
| static int __get_immv(struct insn *insn) |
| { |
| switch (insn->opnd_bytes) { |
| case 2: |
| insn_field_set(&insn->immediate1, get_next(short, insn), 2); |
| break; |
| case 4: |
| insn_field_set(&insn->immediate1, get_next(int, insn), 4); |
| insn->immediate1.nbytes = 4; |
| break; |
| case 8: |
| insn_field_set(&insn->immediate1, get_next(int, insn), 4); |
| insn_field_set(&insn->immediate2, get_next(int, insn), 4); |
| break; |
| default: /* opnd_bytes must be modified manually */ |
| goto err_out; |
| } |
| insn->immediate1.got = insn->immediate2.got = 1; |
| |
| return 1; |
| err_out: |
| return 0; |
| } |
| |
| /* Decode ptr16:16/32(Ap) */ |
| static int __get_immptr(struct insn *insn) |
| { |
| switch (insn->opnd_bytes) { |
| case 2: |
| insn_field_set(&insn->immediate1, get_next(short, insn), 2); |
| break; |
| case 4: |
| insn_field_set(&insn->immediate1, get_next(int, insn), 4); |
| break; |
| case 8: |
| /* ptr16:64 is not exist (no segment) */ |
| return 0; |
| default: /* opnd_bytes must be modified manually */ |
| goto err_out; |
| } |
| insn_field_set(&insn->immediate2, get_next(unsigned short, insn), 2); |
| insn->immediate1.got = insn->immediate2.got = 1; |
| |
| return 1; |
| err_out: |
| return 0; |
| } |
| |
| /** |
| * insn_get_immediate() - Get the immediate in an instruction |
| * @insn: &struct insn containing instruction |
| * |
| * If necessary, first collects the instruction up to and including the |
| * displacement bytes. |
| * Basically, most of immediates are sign-expanded. Unsigned-value can be |
| * computed by bit masking with ((1 << (nbytes * 8)) - 1) |
| * |
| * Returns: |
| * 0: on success |
| * < 0: on error |
| */ |
| int insn_get_immediate(struct insn *insn) |
| { |
| int ret; |
| |
| if (insn->immediate.got) |
| return 0; |
| |
| if (!insn->displacement.got) { |
| ret = insn_get_displacement(insn); |
| if (ret) |
| return ret; |
| } |
| |
| if (inat_has_moffset(insn->attr)) { |
| if (!__get_moffset(insn)) |
| goto err_out; |
| goto done; |
| } |
| |
| if (!inat_has_immediate(insn->attr)) |
| /* no immediates */ |
| goto done; |
| |
| switch (inat_immediate_size(insn->attr)) { |
| case INAT_IMM_BYTE: |
| insn_field_set(&insn->immediate, get_next(signed char, insn), 1); |
| break; |
| case INAT_IMM_WORD: |
| insn_field_set(&insn->immediate, get_next(short, insn), 2); |
| break; |
| case INAT_IMM_DWORD: |
| insn_field_set(&insn->immediate, get_next(int, insn), 4); |
| break; |
| case INAT_IMM_QWORD: |
| insn_field_set(&insn->immediate1, get_next(int, insn), 4); |
| insn_field_set(&insn->immediate2, get_next(int, insn), 4); |
| break; |
| case INAT_IMM_PTR: |
| if (!__get_immptr(insn)) |
| goto err_out; |
| break; |
| case INAT_IMM_VWORD32: |
| if (!__get_immv32(insn)) |
| goto err_out; |
| break; |
| case INAT_IMM_VWORD: |
| if (!__get_immv(insn)) |
| goto err_out; |
| break; |
| default: |
| /* Here, insn must have an immediate, but failed */ |
| goto err_out; |
| } |
| if (inat_has_second_immediate(insn->attr)) { |
| insn_field_set(&insn->immediate2, get_next(signed char, insn), 1); |
| } |
| done: |
| insn->immediate.got = 1; |
| return 0; |
| |
| err_out: |
| return -ENODATA; |
| } |
| |
| /** |
| * insn_get_length() - Get the length of instruction |
| * @insn: &struct insn containing instruction |
| * |
| * If necessary, first collects the instruction up to and including the |
| * immediates bytes. |
| * |
| * Returns: |
| * - 0 on success |
| * - < 0 on error |
| */ |
| int insn_get_length(struct insn *insn) |
| { |
| int ret; |
| |
| if (insn->length) |
| return 0; |
| |
| if (!insn->immediate.got) { |
| ret = insn_get_immediate(insn); |
| if (ret) |
| return ret; |
| } |
| |
| insn->length = (unsigned char)((unsigned long)insn->next_byte |
| - (unsigned long)insn->kaddr); |
| |
| return 0; |
| } |
| |
| /* Ensure this instruction is decoded completely */ |
| static inline int insn_complete(struct insn *insn) |
| { |
| return insn->opcode.got && insn->modrm.got && insn->sib.got && |
| insn->displacement.got && insn->immediate.got; |
| } |
| |
| /** |
| * insn_decode() - Decode an x86 instruction |
| * @insn: &struct insn to be initialized |
| * @kaddr: address (in kernel memory) of instruction (or copy thereof) |
| * @buf_len: length of the insn buffer at @kaddr |
| * @m: insn mode, see enum insn_mode |
| * |
| * Returns: |
| * 0: if decoding succeeded |
| * < 0: otherwise. |
| */ |
| int insn_decode(struct insn *insn, const void *kaddr, int buf_len, enum insn_mode m) |
| { |
| int ret; |
| |
| /* #define INSN_MODE_KERN -1 __ignore_sync_check__ mode is only valid in the kernel */ |
| |
| if (m == INSN_MODE_KERN) |
| insn_init(insn, kaddr, buf_len, IS_ENABLED(CONFIG_X86_64)); |
| else |
| insn_init(insn, kaddr, buf_len, m == INSN_MODE_64); |
| |
| ret = insn_get_length(insn); |
| if (ret) |
| return ret; |
| |
| if (insn_complete(insn)) |
| return 0; |
| |
| return -EINVAL; |
| } |