| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> |
| * 2005-2007 Takahiro Hirofuchi |
| */ |
| |
| #include <libudev.h> |
| |
| #include <errno.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| #include <getopt.h> |
| |
| #include "usbip_common.h" |
| #include "utils.h" |
| #include "usbip.h" |
| #include "sysfs_utils.h" |
| |
| enum unbind_status { |
| UNBIND_ST_OK, |
| UNBIND_ST_USBIP_HOST, |
| UNBIND_ST_FAILED |
| }; |
| |
| static const char usbip_bind_usage_string[] = |
| "usbip bind <args>\n" |
| " -b, --busid=<busid> Bind " USBIP_HOST_DRV_NAME ".ko to device " |
| "on <busid>\n"; |
| |
| void usbip_bind_usage(void) |
| { |
| printf("usage: %s", usbip_bind_usage_string); |
| } |
| |
| /* call at unbound state */ |
| static int bind_usbip(char *busid) |
| { |
| char attr_name[] = "bind"; |
| char bind_attr_path[SYSFS_PATH_MAX]; |
| int rc = -1; |
| |
| snprintf(bind_attr_path, sizeof(bind_attr_path), "%s/%s/%s/%s/%s/%s", |
| SYSFS_MNT_PATH, SYSFS_BUS_NAME, SYSFS_BUS_TYPE, |
| SYSFS_DRIVERS_NAME, USBIP_HOST_DRV_NAME, attr_name); |
| |
| rc = write_sysfs_attribute(bind_attr_path, busid, strlen(busid)); |
| if (rc < 0) { |
| err("error binding device %s to driver: %s", busid, |
| strerror(errno)); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* buggy driver may cause dead lock */ |
| static int unbind_other(char *busid) |
| { |
| enum unbind_status status = UNBIND_ST_OK; |
| |
| char attr_name[] = "unbind"; |
| char unbind_attr_path[SYSFS_PATH_MAX]; |
| int rc = -1; |
| |
| struct udev *udev; |
| struct udev_device *dev; |
| const char *driver; |
| const char *bDevClass; |
| |
| /* Create libudev context. */ |
| udev = udev_new(); |
| |
| /* Get the device. */ |
| dev = udev_device_new_from_subsystem_sysname(udev, "usb", busid); |
| if (!dev) { |
| dbg("unable to find device with bus ID %s", busid); |
| goto err_close_busid_dev; |
| } |
| |
| /* Check what kind of device it is. */ |
| bDevClass = udev_device_get_sysattr_value(dev, "bDeviceClass"); |
| if (!bDevClass) { |
| dbg("unable to get bDevClass device attribute"); |
| goto err_close_busid_dev; |
| } |
| |
| if (!strncmp(bDevClass, "09", strlen(bDevClass))) { |
| dbg("skip unbinding of hub"); |
| goto err_close_busid_dev; |
| } |
| |
| /* Get the device driver. */ |
| driver = udev_device_get_driver(dev); |
| if (!driver) { |
| /* No driver bound to this device. */ |
| goto out; |
| } |
| |
| if (!strncmp(USBIP_HOST_DRV_NAME, driver, |
| strlen(USBIP_HOST_DRV_NAME))) { |
| /* Already bound to usbip-host. */ |
| status = UNBIND_ST_USBIP_HOST; |
| goto out; |
| } |
| |
| /* Unbind device from driver. */ |
| snprintf(unbind_attr_path, sizeof(unbind_attr_path), "%s/%s/%s/%s/%s/%s", |
| SYSFS_MNT_PATH, SYSFS_BUS_NAME, SYSFS_BUS_TYPE, |
| SYSFS_DRIVERS_NAME, driver, attr_name); |
| |
| rc = write_sysfs_attribute(unbind_attr_path, busid, strlen(busid)); |
| if (rc < 0) { |
| err("error unbinding device %s from driver", busid); |
| goto err_close_busid_dev; |
| } |
| |
| goto out; |
| |
| err_close_busid_dev: |
| status = UNBIND_ST_FAILED; |
| out: |
| udev_device_unref(dev); |
| udev_unref(udev); |
| |
| return status; |
| } |
| |
| static int bind_device(char *busid) |
| { |
| int rc; |
| struct udev *udev; |
| struct udev_device *dev; |
| const char *devpath; |
| |
| /* Check whether the device with this bus ID exists. */ |
| udev = udev_new(); |
| dev = udev_device_new_from_subsystem_sysname(udev, "usb", busid); |
| if (!dev) { |
| err("device with the specified bus ID does not exist"); |
| return -1; |
| } |
| devpath = udev_device_get_devpath(dev); |
| udev_unref(udev); |
| |
| /* If the device is already attached to vhci_hcd - bail out */ |
| if (strstr(devpath, USBIP_VHCI_DRV_NAME)) { |
| err("bind loop detected: device: %s is attached to %s\n", |
| devpath, USBIP_VHCI_DRV_NAME); |
| return -1; |
| } |
| |
| rc = unbind_other(busid); |
| if (rc == UNBIND_ST_FAILED) { |
| err("could not unbind driver from device on busid %s", busid); |
| return -1; |
| } else if (rc == UNBIND_ST_USBIP_HOST) { |
| err("device on busid %s is already bound to %s", busid, |
| USBIP_HOST_DRV_NAME); |
| return -1; |
| } |
| |
| rc = modify_match_busid(busid, 1); |
| if (rc < 0) { |
| err("unable to bind device on %s", busid); |
| return -1; |
| } |
| |
| rc = bind_usbip(busid); |
| if (rc < 0) { |
| err("could not bind device to %s", USBIP_HOST_DRV_NAME); |
| modify_match_busid(busid, 0); |
| return -1; |
| } |
| |
| info("bind device on busid %s: complete", busid); |
| |
| return 0; |
| } |
| |
| int usbip_bind(int argc, char *argv[]) |
| { |
| static const struct option opts[] = { |
| { "busid", required_argument, NULL, 'b' }, |
| { NULL, 0, NULL, 0 } |
| }; |
| |
| int opt; |
| int ret = -1; |
| |
| for (;;) { |
| opt = getopt_long(argc, argv, "b:", opts, NULL); |
| |
| if (opt == -1) |
| break; |
| |
| switch (opt) { |
| case 'b': |
| ret = bind_device(optarg); |
| goto out; |
| default: |
| goto err_out; |
| } |
| } |
| |
| err_out: |
| usbip_bind_usage(); |
| out: |
| return ret; |
| } |