| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2016 BayLibre, SAS |
| * Author: Neil Armstrong <narmstrong@baylibre.com> |
| * Copyright (C) 2014 Endless Mobile |
| * |
| * Written by: |
| * Jasper St. Pierre <jstpierre@mecheye.net> |
| */ |
| |
| #include <linux/component.h> |
| #include <linux/module.h> |
| #include <linux/of_graph.h> |
| #include <linux/sys_soc.h> |
| #include <linux/platform_device.h> |
| #include <linux/soc/amlogic/meson-canvas.h> |
| |
| #include <drm/drm_aperture.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_fbdev_generic.h> |
| #include <drm/drm_gem_dma_helper.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| #include <drm/drm_modeset_helper_vtables.h> |
| #include <drm/drm_module.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_vblank.h> |
| |
| #include "meson_crtc.h" |
| #include "meson_drv.h" |
| #include "meson_overlay.h" |
| #include "meson_plane.h" |
| #include "meson_osd_afbcd.h" |
| #include "meson_registers.h" |
| #include "meson_encoder_cvbs.h" |
| #include "meson_encoder_hdmi.h" |
| #include "meson_viu.h" |
| #include "meson_vpp.h" |
| #include "meson_rdma.h" |
| |
| #define DRIVER_NAME "meson" |
| #define DRIVER_DESC "Amlogic Meson DRM driver" |
| |
| /** |
| * DOC: Video Processing Unit |
| * |
| * VPU Handles the Global Video Processing, it includes management of the |
| * clocks gates, blocks reset lines and power domains. |
| * |
| * What is missing : |
| * |
| * - Full reset of entire video processing HW blocks |
| * - Scaling and setup of the VPU clock |
| * - Bus clock gates |
| * - Powering up video processing HW blocks |
| * - Powering Up HDMI controller and PHY |
| */ |
| |
| static const struct drm_mode_config_funcs meson_mode_config_funcs = { |
| .atomic_check = drm_atomic_helper_check, |
| .atomic_commit = drm_atomic_helper_commit, |
| .fb_create = drm_gem_fb_create, |
| }; |
| |
| static const struct drm_mode_config_helper_funcs meson_mode_config_helpers = { |
| .atomic_commit_tail = drm_atomic_helper_commit_tail_rpm, |
| }; |
| |
| static irqreturn_t meson_irq(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct meson_drm *priv = dev->dev_private; |
| |
| (void)readl_relaxed(priv->io_base + _REG(VENC_INTFLAG)); |
| |
| meson_crtc_irq(priv); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int meson_dumb_create(struct drm_file *file, struct drm_device *dev, |
| struct drm_mode_create_dumb *args) |
| { |
| /* |
| * We need 64bytes aligned stride, and PAGE aligned size |
| */ |
| args->pitch = ALIGN(DIV_ROUND_UP(args->width * args->bpp, 8), SZ_64); |
| args->size = PAGE_ALIGN(args->pitch * args->height); |
| |
| return drm_gem_dma_dumb_create_internal(file, dev, args); |
| } |
| |
| DEFINE_DRM_GEM_DMA_FOPS(fops); |
| |
| static const struct drm_driver meson_driver = { |
| .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, |
| |
| /* DMA Ops */ |
| DRM_GEM_DMA_DRIVER_OPS_WITH_DUMB_CREATE(meson_dumb_create), |
| |
| /* Misc */ |
| .fops = &fops, |
| .name = DRIVER_NAME, |
| .desc = DRIVER_DESC, |
| .date = "20161109", |
| .major = 1, |
| .minor = 0, |
| }; |
| |
| static bool meson_vpu_has_available_connectors(struct device *dev) |
| { |
| struct device_node *ep, *remote; |
| |
| /* Parses each endpoint and check if remote exists */ |
| for_each_endpoint_of_node(dev->of_node, ep) { |
| /* If the endpoint node exists, consider it enabled */ |
| remote = of_graph_get_remote_port(ep); |
| if (remote) { |
| of_node_put(remote); |
| of_node_put(ep); |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static struct regmap_config meson_regmap_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = 0x1000, |
| }; |
| |
| static void meson_vpu_init(struct meson_drm *priv) |
| { |
| u32 value; |
| |
| /* |
| * Slave dc0 and dc5 connected to master port 1. |
| * By default other slaves are connected to master port 0. |
| */ |
| value = VPU_RDARB_SLAVE_TO_MASTER_PORT(0, 1) | |
| VPU_RDARB_SLAVE_TO_MASTER_PORT(5, 1); |
| writel_relaxed(value, priv->io_base + _REG(VPU_RDARB_MODE_L1C1)); |
| |
| /* Slave dc0 connected to master port 1 */ |
| value = VPU_RDARB_SLAVE_TO_MASTER_PORT(0, 1); |
| writel_relaxed(value, priv->io_base + _REG(VPU_RDARB_MODE_L1C2)); |
| |
| /* Slave dc4 and dc7 connected to master port 1 */ |
| value = VPU_RDARB_SLAVE_TO_MASTER_PORT(4, 1) | |
| VPU_RDARB_SLAVE_TO_MASTER_PORT(7, 1); |
| writel_relaxed(value, priv->io_base + _REG(VPU_RDARB_MODE_L2C1)); |
| |
| /* Slave dc1 connected to master port 1 */ |
| value = VPU_RDARB_SLAVE_TO_MASTER_PORT(1, 1); |
| writel_relaxed(value, priv->io_base + _REG(VPU_WRARB_MODE_L2C1)); |
| } |
| |
| struct meson_drm_soc_attr { |
| struct meson_drm_soc_limits limits; |
| const struct soc_device_attribute *attrs; |
| }; |
| |
| static const struct meson_drm_soc_attr meson_drm_soc_attrs[] = { |
| /* S805X/S805Y HDMI PLL won't lock for HDMI PHY freq > 1,65GHz */ |
| { |
| .limits = { |
| .max_hdmi_phy_freq = 1650000, |
| }, |
| .attrs = (const struct soc_device_attribute []) { |
| { .soc_id = "GXL (S805*)", }, |
| { /* sentinel */ } |
| } |
| }, |
| }; |
| |
| static int meson_drv_bind_master(struct device *dev, bool has_components) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| const struct meson_drm_match_data *match; |
| struct meson_drm *priv; |
| struct drm_device *drm; |
| struct resource *res; |
| void __iomem *regs; |
| int ret, i; |
| |
| /* Checks if an output connector is available */ |
| if (!meson_vpu_has_available_connectors(dev)) { |
| dev_err(dev, "No output connector available\n"); |
| return -ENODEV; |
| } |
| |
| match = of_device_get_match_data(dev); |
| if (!match) |
| return -ENODEV; |
| |
| drm = drm_dev_alloc(&meson_driver, dev); |
| if (IS_ERR(drm)) |
| return PTR_ERR(drm); |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) { |
| ret = -ENOMEM; |
| goto free_drm; |
| } |
| drm->dev_private = priv; |
| priv->drm = drm; |
| priv->dev = dev; |
| priv->compat = match->compat; |
| priv->afbcd.ops = match->afbcd_ops; |
| |
| regs = devm_platform_ioremap_resource_byname(pdev, "vpu"); |
| if (IS_ERR(regs)) { |
| ret = PTR_ERR(regs); |
| goto free_drm; |
| } |
| |
| priv->io_base = regs; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hhi"); |
| if (!res) { |
| ret = -EINVAL; |
| goto free_drm; |
| } |
| /* Simply ioremap since it may be a shared register zone */ |
| regs = devm_ioremap(dev, res->start, resource_size(res)); |
| if (!regs) { |
| ret = -EADDRNOTAVAIL; |
| goto free_drm; |
| } |
| |
| priv->hhi = devm_regmap_init_mmio(dev, regs, |
| &meson_regmap_config); |
| if (IS_ERR(priv->hhi)) { |
| dev_err(&pdev->dev, "Couldn't create the HHI regmap\n"); |
| ret = PTR_ERR(priv->hhi); |
| goto free_drm; |
| } |
| |
| priv->canvas = meson_canvas_get(dev); |
| if (IS_ERR(priv->canvas)) { |
| ret = PTR_ERR(priv->canvas); |
| goto free_drm; |
| } |
| |
| ret = meson_canvas_alloc(priv->canvas, &priv->canvas_id_osd1); |
| if (ret) |
| goto free_drm; |
| ret = meson_canvas_alloc(priv->canvas, &priv->canvas_id_vd1_0); |
| if (ret) { |
| meson_canvas_free(priv->canvas, priv->canvas_id_osd1); |
| goto free_drm; |
| } |
| ret = meson_canvas_alloc(priv->canvas, &priv->canvas_id_vd1_1); |
| if (ret) { |
| meson_canvas_free(priv->canvas, priv->canvas_id_osd1); |
| meson_canvas_free(priv->canvas, priv->canvas_id_vd1_0); |
| goto free_drm; |
| } |
| ret = meson_canvas_alloc(priv->canvas, &priv->canvas_id_vd1_2); |
| if (ret) { |
| meson_canvas_free(priv->canvas, priv->canvas_id_osd1); |
| meson_canvas_free(priv->canvas, priv->canvas_id_vd1_0); |
| meson_canvas_free(priv->canvas, priv->canvas_id_vd1_1); |
| goto free_drm; |
| } |
| |
| priv->vsync_irq = platform_get_irq(pdev, 0); |
| |
| ret = drm_vblank_init(drm, 1); |
| if (ret) |
| goto free_drm; |
| |
| /* Assign limits per soc revision/package */ |
| for (i = 0 ; i < ARRAY_SIZE(meson_drm_soc_attrs) ; ++i) { |
| if (soc_device_match(meson_drm_soc_attrs[i].attrs)) { |
| priv->limits = &meson_drm_soc_attrs[i].limits; |
| break; |
| } |
| } |
| |
| /* |
| * Remove early framebuffers (ie. simplefb). The framebuffer can be |
| * located anywhere in RAM |
| */ |
| ret = drm_aperture_remove_framebuffers(false, &meson_driver); |
| if (ret) |
| goto free_drm; |
| |
| ret = drmm_mode_config_init(drm); |
| if (ret) |
| goto free_drm; |
| drm->mode_config.max_width = 3840; |
| drm->mode_config.max_height = 2160; |
| drm->mode_config.funcs = &meson_mode_config_funcs; |
| drm->mode_config.helper_private = &meson_mode_config_helpers; |
| |
| /* Hardware Initialization */ |
| |
| meson_vpu_init(priv); |
| meson_venc_init(priv); |
| meson_vpp_init(priv); |
| meson_viu_init(priv); |
| if (priv->afbcd.ops) { |
| ret = priv->afbcd.ops->init(priv); |
| if (ret) |
| goto free_drm; |
| } |
| |
| /* Encoder Initialization */ |
| |
| ret = meson_encoder_cvbs_init(priv); |
| if (ret) |
| goto exit_afbcd; |
| |
| if (has_components) { |
| ret = component_bind_all(drm->dev, drm); |
| if (ret) { |
| dev_err(drm->dev, "Couldn't bind all components\n"); |
| goto exit_afbcd; |
| } |
| } |
| |
| ret = meson_encoder_hdmi_init(priv); |
| if (ret) |
| goto exit_afbcd; |
| |
| ret = meson_plane_create(priv); |
| if (ret) |
| goto exit_afbcd; |
| |
| ret = meson_overlay_create(priv); |
| if (ret) |
| goto exit_afbcd; |
| |
| ret = meson_crtc_create(priv); |
| if (ret) |
| goto exit_afbcd; |
| |
| ret = request_irq(priv->vsync_irq, meson_irq, 0, drm->driver->name, drm); |
| if (ret) |
| goto exit_afbcd; |
| |
| drm_mode_config_reset(drm); |
| |
| drm_kms_helper_poll_init(drm); |
| |
| platform_set_drvdata(pdev, priv); |
| |
| ret = drm_dev_register(drm, 0); |
| if (ret) |
| goto uninstall_irq; |
| |
| drm_fbdev_generic_setup(drm, 32); |
| |
| return 0; |
| |
| uninstall_irq: |
| free_irq(priv->vsync_irq, drm); |
| exit_afbcd: |
| if (priv->afbcd.ops) |
| priv->afbcd.ops->exit(priv); |
| free_drm: |
| drm_dev_put(drm); |
| |
| return ret; |
| } |
| |
| static int meson_drv_bind(struct device *dev) |
| { |
| return meson_drv_bind_master(dev, true); |
| } |
| |
| static void meson_drv_unbind(struct device *dev) |
| { |
| struct meson_drm *priv = dev_get_drvdata(dev); |
| struct drm_device *drm = priv->drm; |
| |
| if (priv->canvas) { |
| meson_canvas_free(priv->canvas, priv->canvas_id_osd1); |
| meson_canvas_free(priv->canvas, priv->canvas_id_vd1_0); |
| meson_canvas_free(priv->canvas, priv->canvas_id_vd1_1); |
| meson_canvas_free(priv->canvas, priv->canvas_id_vd1_2); |
| } |
| |
| drm_dev_unregister(drm); |
| drm_kms_helper_poll_fini(drm); |
| drm_atomic_helper_shutdown(drm); |
| free_irq(priv->vsync_irq, drm); |
| drm_dev_put(drm); |
| |
| meson_encoder_hdmi_remove(priv); |
| meson_encoder_cvbs_remove(priv); |
| |
| component_unbind_all(dev, drm); |
| |
| if (priv->afbcd.ops) |
| priv->afbcd.ops->exit(priv); |
| } |
| |
| static const struct component_master_ops meson_drv_master_ops = { |
| .bind = meson_drv_bind, |
| .unbind = meson_drv_unbind, |
| }; |
| |
| static int __maybe_unused meson_drv_pm_suspend(struct device *dev) |
| { |
| struct meson_drm *priv = dev_get_drvdata(dev); |
| |
| if (!priv) |
| return 0; |
| |
| return drm_mode_config_helper_suspend(priv->drm); |
| } |
| |
| static int __maybe_unused meson_drv_pm_resume(struct device *dev) |
| { |
| struct meson_drm *priv = dev_get_drvdata(dev); |
| |
| if (!priv) |
| return 0; |
| |
| meson_vpu_init(priv); |
| meson_venc_init(priv); |
| meson_vpp_init(priv); |
| meson_viu_init(priv); |
| if (priv->afbcd.ops) |
| priv->afbcd.ops->init(priv); |
| |
| return drm_mode_config_helper_resume(priv->drm); |
| } |
| |
| static void meson_drv_shutdown(struct platform_device *pdev) |
| { |
| struct meson_drm *priv = dev_get_drvdata(&pdev->dev); |
| |
| if (!priv) |
| return; |
| |
| drm_kms_helper_poll_fini(priv->drm); |
| drm_atomic_helper_shutdown(priv->drm); |
| } |
| |
| /* Possible connectors nodes to ignore */ |
| static const struct of_device_id connectors_match[] = { |
| { .compatible = "composite-video-connector" }, |
| { .compatible = "svideo-connector" }, |
| {} |
| }; |
| |
| static int meson_drv_probe(struct platform_device *pdev) |
| { |
| struct component_match *match = NULL; |
| struct device_node *np = pdev->dev.of_node; |
| struct device_node *ep, *remote; |
| int count = 0; |
| |
| for_each_endpoint_of_node(np, ep) { |
| remote = of_graph_get_remote_port_parent(ep); |
| if (!remote || !of_device_is_available(remote)) { |
| of_node_put(remote); |
| continue; |
| } |
| |
| /* If an analog connector is detected, count it as an output */ |
| if (of_match_node(connectors_match, remote)) { |
| ++count; |
| of_node_put(remote); |
| continue; |
| } |
| |
| dev_dbg(&pdev->dev, "parent %pOF remote match add %pOF parent %s\n", |
| np, remote, dev_name(&pdev->dev)); |
| |
| component_match_add(&pdev->dev, &match, component_compare_of, remote); |
| |
| of_node_put(remote); |
| |
| ++count; |
| } |
| |
| if (count && !match) |
| return meson_drv_bind_master(&pdev->dev, false); |
| |
| /* If some endpoints were found, initialize the nodes */ |
| if (count) { |
| dev_info(&pdev->dev, "Queued %d outputs on vpu\n", count); |
| |
| return component_master_add_with_match(&pdev->dev, |
| &meson_drv_master_ops, |
| match); |
| } |
| |
| /* If no output endpoints were available, simply bail out */ |
| return 0; |
| }; |
| |
| static int meson_drv_remove(struct platform_device *pdev) |
| { |
| component_master_del(&pdev->dev, &meson_drv_master_ops); |
| |
| return 0; |
| } |
| |
| static struct meson_drm_match_data meson_drm_gxbb_data = { |
| .compat = VPU_COMPATIBLE_GXBB, |
| }; |
| |
| static struct meson_drm_match_data meson_drm_gxl_data = { |
| .compat = VPU_COMPATIBLE_GXL, |
| }; |
| |
| static struct meson_drm_match_data meson_drm_gxm_data = { |
| .compat = VPU_COMPATIBLE_GXM, |
| .afbcd_ops = &meson_afbcd_gxm_ops, |
| }; |
| |
| static struct meson_drm_match_data meson_drm_g12a_data = { |
| .compat = VPU_COMPATIBLE_G12A, |
| .afbcd_ops = &meson_afbcd_g12a_ops, |
| }; |
| |
| static const struct of_device_id dt_match[] = { |
| { .compatible = "amlogic,meson-gxbb-vpu", |
| .data = (void *)&meson_drm_gxbb_data }, |
| { .compatible = "amlogic,meson-gxl-vpu", |
| .data = (void *)&meson_drm_gxl_data }, |
| { .compatible = "amlogic,meson-gxm-vpu", |
| .data = (void *)&meson_drm_gxm_data }, |
| { .compatible = "amlogic,meson-g12a-vpu", |
| .data = (void *)&meson_drm_g12a_data }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, dt_match); |
| |
| static const struct dev_pm_ops meson_drv_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(meson_drv_pm_suspend, meson_drv_pm_resume) |
| }; |
| |
| static struct platform_driver meson_drm_platform_driver = { |
| .probe = meson_drv_probe, |
| .remove = meson_drv_remove, |
| .shutdown = meson_drv_shutdown, |
| .driver = { |
| .name = "meson-drm", |
| .of_match_table = dt_match, |
| .pm = &meson_drv_pm_ops, |
| }, |
| }; |
| |
| drm_module_platform_driver(meson_drm_platform_driver); |
| |
| MODULE_AUTHOR("Jasper St. Pierre <jstpierre@mecheye.net>"); |
| MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |