| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_bridge.h> |
| #include <drm/drm_crtc.h> |
| |
| #include "msm_drv.h" |
| #include "msm_kms.h" |
| #include "dp_drm.h" |
| |
| struct dp_connector { |
| struct drm_connector base; |
| struct msm_dp *dp_display; |
| }; |
| #define to_dp_connector(x) container_of(x, struct dp_connector, base) |
| |
| /** |
| * dp_connector_detect - callback to determine if connector is connected |
| * @conn: Pointer to drm connector structure |
| * @force: Force detect setting from drm framework |
| * Returns: Connector 'is connected' status |
| */ |
| static enum drm_connector_status dp_connector_detect(struct drm_connector *conn, |
| bool force) |
| { |
| struct msm_dp *dp; |
| |
| dp = to_dp_connector(conn)->dp_display; |
| |
| DRM_DEBUG_DP("is_connected = %s\n", |
| (dp->is_connected) ? "true" : "false"); |
| |
| return (dp->is_connected) ? connector_status_connected : |
| connector_status_disconnected; |
| } |
| |
| /** |
| * dp_connector_get_modes - callback to add drm modes via drm_mode_probed_add() |
| * @connector: Pointer to drm connector structure |
| * Returns: Number of modes added |
| */ |
| static int dp_connector_get_modes(struct drm_connector *connector) |
| { |
| int rc = 0; |
| struct msm_dp *dp; |
| struct dp_display_mode *dp_mode = NULL; |
| struct drm_display_mode *m, drm_mode; |
| |
| if (!connector) |
| return 0; |
| |
| dp = to_dp_connector(connector)->dp_display; |
| |
| dp_mode = kzalloc(sizeof(*dp_mode), GFP_KERNEL); |
| if (!dp_mode) |
| return 0; |
| |
| /* pluggable case assumes EDID is read when HPD */ |
| if (dp->is_connected) { |
| /* |
| *The get_modes() function might return one mode that is stored |
| * in dp_mode when compliance test is in progress. If not, the |
| * return value is equal to the total number of modes supported |
| * by the sink |
| */ |
| rc = dp_display_get_modes(dp, dp_mode); |
| if (rc <= 0) { |
| DRM_ERROR("failed to get DP sink modes, rc=%d\n", rc); |
| kfree(dp_mode); |
| return rc; |
| } |
| if (dp_mode->drm_mode.clock) { /* valid DP mode */ |
| memset(&drm_mode, 0x0, sizeof(drm_mode)); |
| drm_mode_copy(&drm_mode, &dp_mode->drm_mode); |
| m = drm_mode_duplicate(connector->dev, &drm_mode); |
| if (!m) { |
| DRM_ERROR("failed to add mode %ux%u\n", |
| drm_mode.hdisplay, |
| drm_mode.vdisplay); |
| kfree(dp_mode); |
| return 0; |
| } |
| drm_mode_probed_add(connector, m); |
| } |
| } else { |
| DRM_DEBUG_DP("No sink connected\n"); |
| } |
| kfree(dp_mode); |
| return rc; |
| } |
| |
| /** |
| * dp_connector_mode_valid - callback to determine if specified mode is valid |
| * @connector: Pointer to drm connector structure |
| * @mode: Pointer to drm mode structure |
| * Returns: Validity status for specified mode |
| */ |
| static enum drm_mode_status dp_connector_mode_valid( |
| struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct msm_dp *dp_disp; |
| |
| dp_disp = to_dp_connector(connector)->dp_display; |
| |
| if ((dp_disp->max_pclk_khz <= 0) || |
| (dp_disp->max_pclk_khz > DP_MAX_PIXEL_CLK_KHZ) || |
| (mode->clock > dp_disp->max_pclk_khz)) |
| return MODE_BAD; |
| |
| return dp_display_validate_mode(dp_disp, mode->clock); |
| } |
| |
| static const struct drm_connector_funcs dp_connector_funcs = { |
| .detect = dp_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = drm_connector_cleanup, |
| .reset = drm_atomic_helper_connector_reset, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static const struct drm_connector_helper_funcs dp_connector_helper_funcs = { |
| .get_modes = dp_connector_get_modes, |
| .mode_valid = dp_connector_mode_valid, |
| }; |
| |
| /* connector initialization */ |
| struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display) |
| { |
| struct drm_connector *connector = NULL; |
| struct dp_connector *dp_connector; |
| int ret; |
| |
| dp_connector = devm_kzalloc(dp_display->drm_dev->dev, |
| sizeof(*dp_connector), |
| GFP_KERNEL); |
| if (!dp_connector) |
| return ERR_PTR(-ENOMEM); |
| |
| dp_connector->dp_display = dp_display; |
| |
| connector = &dp_connector->base; |
| |
| ret = drm_connector_init(dp_display->drm_dev, connector, |
| &dp_connector_funcs, |
| dp_display->connector_type); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| drm_connector_helper_add(connector, &dp_connector_helper_funcs); |
| |
| /* |
| * Enable HPD to let hpd event is handled when cable is connected. |
| */ |
| connector->polled = DRM_CONNECTOR_POLL_HPD; |
| |
| drm_connector_attach_encoder(connector, dp_display->encoder); |
| |
| if (dp_display->panel_bridge) { |
| ret = drm_bridge_attach(dp_display->encoder, |
| dp_display->panel_bridge, NULL, |
| DRM_BRIDGE_ATTACH_NO_CONNECTOR); |
| if (ret < 0) { |
| DRM_ERROR("failed to attach panel bridge: %d\n", ret); |
| return ERR_PTR(ret); |
| } |
| } |
| |
| return connector; |
| } |