| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Mac80211 SDIO driver for ST-Ericsson CW1200 device |
| * |
| * Copyright (c) 2010, ST-Ericsson |
| * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/gpio.h> |
| #include <linux/delay.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/sdio.h> |
| #include <linux/mmc/sdio_ids.h> |
| #include <net/mac80211.h> |
| |
| #include "cw1200.h" |
| #include "hwbus.h" |
| #include <linux/platform_data/net-cw1200.h> |
| #include "hwio.h" |
| |
| MODULE_AUTHOR("Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>"); |
| MODULE_DESCRIPTION("mac80211 ST-Ericsson CW1200 SDIO driver"); |
| MODULE_LICENSE("GPL"); |
| |
| #define SDIO_BLOCK_SIZE (512) |
| |
| /* Default platform data for Sagrad modules */ |
| static struct cw1200_platform_data_sdio sagrad_109x_evk_platform_data = { |
| .ref_clk = 38400, |
| .have_5ghz = false, |
| .sdd_file = "sdd_sagrad_1091_1098.bin", |
| }; |
| |
| /* Allow platform data to be overridden */ |
| static struct cw1200_platform_data_sdio *global_plat_data = &sagrad_109x_evk_platform_data; |
| |
| void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata) |
| { |
| global_plat_data = pdata; |
| } |
| |
| struct hwbus_priv { |
| struct sdio_func *func; |
| struct cw1200_common *core; |
| const struct cw1200_platform_data_sdio *pdata; |
| }; |
| |
| static const struct sdio_device_id cw1200_sdio_ids[] = { |
| { SDIO_DEVICE(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200) }, |
| { /* end: all zeroes */ }, |
| }; |
| MODULE_DEVICE_TABLE(sdio, cw1200_sdio_ids); |
| |
| /* hwbus_ops implemetation */ |
| |
| static int cw1200_sdio_memcpy_fromio(struct hwbus_priv *self, |
| unsigned int addr, |
| void *dst, int count) |
| { |
| return sdio_memcpy_fromio(self->func, dst, addr, count); |
| } |
| |
| static int cw1200_sdio_memcpy_toio(struct hwbus_priv *self, |
| unsigned int addr, |
| const void *src, int count) |
| { |
| return sdio_memcpy_toio(self->func, addr, (void *)src, count); |
| } |
| |
| static void cw1200_sdio_lock(struct hwbus_priv *self) |
| { |
| sdio_claim_host(self->func); |
| } |
| |
| static void cw1200_sdio_unlock(struct hwbus_priv *self) |
| { |
| sdio_release_host(self->func); |
| } |
| |
| static void cw1200_sdio_irq_handler(struct sdio_func *func) |
| { |
| struct hwbus_priv *self = sdio_get_drvdata(func); |
| |
| /* note: sdio_host already claimed here. */ |
| if (self->core) |
| cw1200_irq_handler(self->core); |
| } |
| |
| static irqreturn_t cw1200_gpio_hardirq(int irq, void *dev_id) |
| { |
| return IRQ_WAKE_THREAD; |
| } |
| |
| static irqreturn_t cw1200_gpio_irq(int irq, void *dev_id) |
| { |
| struct hwbus_priv *self = dev_id; |
| |
| if (self->core) { |
| cw1200_sdio_lock(self); |
| cw1200_irq_handler(self->core); |
| cw1200_sdio_unlock(self); |
| return IRQ_HANDLED; |
| } else { |
| return IRQ_NONE; |
| } |
| } |
| |
| static int cw1200_request_irq(struct hwbus_priv *self) |
| { |
| int ret; |
| u8 cccr; |
| |
| cccr = sdio_f0_readb(self->func, SDIO_CCCR_IENx, &ret); |
| if (WARN_ON(ret)) |
| goto err; |
| |
| /* Master interrupt enable ... */ |
| cccr |= BIT(0); |
| |
| /* ... for our function */ |
| cccr |= BIT(self->func->num); |
| |
| sdio_f0_writeb(self->func, cccr, SDIO_CCCR_IENx, &ret); |
| if (WARN_ON(ret)) |
| goto err; |
| |
| ret = enable_irq_wake(self->pdata->irq); |
| if (WARN_ON(ret)) |
| goto err; |
| |
| /* Request the IRQ */ |
| ret = request_threaded_irq(self->pdata->irq, cw1200_gpio_hardirq, |
| cw1200_gpio_irq, |
| IRQF_TRIGGER_HIGH | IRQF_ONESHOT, |
| "cw1200_wlan_irq", self); |
| if (WARN_ON(ret)) |
| goto err; |
| |
| return 0; |
| |
| err: |
| return ret; |
| } |
| |
| static int cw1200_sdio_irq_subscribe(struct hwbus_priv *self) |
| { |
| int ret = 0; |
| |
| pr_debug("SW IRQ subscribe\n"); |
| sdio_claim_host(self->func); |
| if (self->pdata->irq) |
| ret = cw1200_request_irq(self); |
| else |
| ret = sdio_claim_irq(self->func, cw1200_sdio_irq_handler); |
| |
| sdio_release_host(self->func); |
| return ret; |
| } |
| |
| static int cw1200_sdio_irq_unsubscribe(struct hwbus_priv *self) |
| { |
| int ret = 0; |
| |
| pr_debug("SW IRQ unsubscribe\n"); |
| |
| if (self->pdata->irq) { |
| disable_irq_wake(self->pdata->irq); |
| free_irq(self->pdata->irq, self); |
| } else { |
| sdio_claim_host(self->func); |
| ret = sdio_release_irq(self->func); |
| sdio_release_host(self->func); |
| } |
| return ret; |
| } |
| |
| static int cw1200_sdio_off(const struct cw1200_platform_data_sdio *pdata) |
| { |
| if (pdata->reset) { |
| gpio_set_value(pdata->reset, 0); |
| msleep(30); /* Min is 2 * CLK32K cycles */ |
| gpio_free(pdata->reset); |
| } |
| |
| if (pdata->power_ctrl) |
| pdata->power_ctrl(pdata, false); |
| if (pdata->clk_ctrl) |
| pdata->clk_ctrl(pdata, false); |
| |
| return 0; |
| } |
| |
| static int cw1200_sdio_on(const struct cw1200_platform_data_sdio *pdata) |
| { |
| /* Ensure I/Os are pulled low */ |
| if (pdata->reset) { |
| gpio_request(pdata->reset, "cw1200_wlan_reset"); |
| gpio_direction_output(pdata->reset, 0); |
| } |
| if (pdata->powerup) { |
| gpio_request(pdata->powerup, "cw1200_wlan_powerup"); |
| gpio_direction_output(pdata->powerup, 0); |
| } |
| if (pdata->reset || pdata->powerup) |
| msleep(10); /* Settle time? */ |
| |
| /* Enable 3v3 and 1v8 to hardware */ |
| if (pdata->power_ctrl) { |
| if (pdata->power_ctrl(pdata, true)) { |
| pr_err("power_ctrl() failed!\n"); |
| return -1; |
| } |
| } |
| |
| /* Enable CLK32K */ |
| if (pdata->clk_ctrl) { |
| if (pdata->clk_ctrl(pdata, true)) { |
| pr_err("clk_ctrl() failed!\n"); |
| return -1; |
| } |
| msleep(10); /* Delay until clock is stable for 2 cycles */ |
| } |
| |
| /* Enable POWERUP signal */ |
| if (pdata->powerup) { |
| gpio_set_value(pdata->powerup, 1); |
| msleep(250); /* or more..? */ |
| } |
| /* Enable RSTn signal */ |
| if (pdata->reset) { |
| gpio_set_value(pdata->reset, 1); |
| msleep(50); /* Or more..? */ |
| } |
| return 0; |
| } |
| |
| static size_t cw1200_sdio_align_size(struct hwbus_priv *self, size_t size) |
| { |
| if (self->pdata->no_nptb) |
| size = round_up(size, SDIO_BLOCK_SIZE); |
| else |
| size = sdio_align_size(self->func, size); |
| |
| return size; |
| } |
| |
| static int cw1200_sdio_pm(struct hwbus_priv *self, bool suspend) |
| { |
| int ret = 0; |
| |
| if (self->pdata->irq) |
| ret = irq_set_irq_wake(self->pdata->irq, suspend); |
| return ret; |
| } |
| |
| static const struct hwbus_ops cw1200_sdio_hwbus_ops = { |
| .hwbus_memcpy_fromio = cw1200_sdio_memcpy_fromio, |
| .hwbus_memcpy_toio = cw1200_sdio_memcpy_toio, |
| .lock = cw1200_sdio_lock, |
| .unlock = cw1200_sdio_unlock, |
| .align_size = cw1200_sdio_align_size, |
| .power_mgmt = cw1200_sdio_pm, |
| }; |
| |
| /* Probe Function to be called by SDIO stack when device is discovered */ |
| static int cw1200_sdio_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| struct hwbus_priv *self; |
| int status; |
| |
| pr_info("cw1200_wlan_sdio: Probe called\n"); |
| |
| /* We are only able to handle the wlan function */ |
| if (func->num != 0x01) |
| return -ENODEV; |
| |
| self = kzalloc(sizeof(*self), GFP_KERNEL); |
| if (!self) { |
| pr_err("Can't allocate SDIO hwbus_priv.\n"); |
| return -ENOMEM; |
| } |
| |
| func->card->quirks |= MMC_QUIRK_LENIENT_FN0; |
| |
| self->pdata = global_plat_data; /* FIXME */ |
| self->func = func; |
| sdio_set_drvdata(func, self); |
| sdio_claim_host(func); |
| sdio_enable_func(func); |
| sdio_release_host(func); |
| |
| status = cw1200_sdio_irq_subscribe(self); |
| |
| status = cw1200_core_probe(&cw1200_sdio_hwbus_ops, |
| self, &func->dev, &self->core, |
| self->pdata->ref_clk, |
| self->pdata->macaddr, |
| self->pdata->sdd_file, |
| self->pdata->have_5ghz); |
| if (status) { |
| cw1200_sdio_irq_unsubscribe(self); |
| sdio_claim_host(func); |
| sdio_disable_func(func); |
| sdio_release_host(func); |
| sdio_set_drvdata(func, NULL); |
| kfree(self); |
| } |
| |
| return status; |
| } |
| |
| /* Disconnect Function to be called by SDIO stack when |
| * device is disconnected |
| */ |
| static void cw1200_sdio_disconnect(struct sdio_func *func) |
| { |
| struct hwbus_priv *self = sdio_get_drvdata(func); |
| |
| if (self) { |
| cw1200_sdio_irq_unsubscribe(self); |
| if (self->core) { |
| cw1200_core_release(self->core); |
| self->core = NULL; |
| } |
| sdio_claim_host(func); |
| sdio_disable_func(func); |
| sdio_release_host(func); |
| sdio_set_drvdata(func, NULL); |
| kfree(self); |
| } |
| } |
| |
| #ifdef CONFIG_PM |
| static int cw1200_sdio_suspend(struct device *dev) |
| { |
| int ret; |
| struct sdio_func *func = dev_to_sdio_func(dev); |
| struct hwbus_priv *self = sdio_get_drvdata(func); |
| |
| if (!cw1200_can_suspend(self->core)) |
| return -EAGAIN; |
| |
| /* Notify SDIO that CW1200 will remain powered during suspend */ |
| ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); |
| if (ret) |
| pr_err("Error setting SDIO pm flags: %i\n", ret); |
| |
| return ret; |
| } |
| |
| static int cw1200_sdio_resume(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static const struct dev_pm_ops cw1200_pm_ops = { |
| .suspend = cw1200_sdio_suspend, |
| .resume = cw1200_sdio_resume, |
| }; |
| #endif |
| |
| static struct sdio_driver sdio_driver = { |
| .name = "cw1200_wlan_sdio", |
| .id_table = cw1200_sdio_ids, |
| .probe = cw1200_sdio_probe, |
| .remove = cw1200_sdio_disconnect, |
| #ifdef CONFIG_PM |
| .drv = { |
| .pm = &cw1200_pm_ops, |
| } |
| #endif |
| }; |
| |
| /* Init Module function -> Called by insmod */ |
| static int __init cw1200_sdio_init(void) |
| { |
| const struct cw1200_platform_data_sdio *pdata; |
| int ret; |
| |
| /* FIXME -- this won't support multiple devices */ |
| pdata = global_plat_data; |
| |
| if (cw1200_sdio_on(pdata)) { |
| ret = -1; |
| goto err; |
| } |
| |
| ret = sdio_register_driver(&sdio_driver); |
| if (ret) |
| goto err; |
| |
| return 0; |
| |
| err: |
| cw1200_sdio_off(pdata); |
| return ret; |
| } |
| |
| /* Called at Driver Unloading */ |
| static void __exit cw1200_sdio_exit(void) |
| { |
| const struct cw1200_platform_data_sdio *pdata; |
| |
| /* FIXME -- this won't support multiple devices */ |
| pdata = global_plat_data; |
| sdio_unregister_driver(&sdio_driver); |
| cw1200_sdio_off(pdata); |
| } |
| |
| |
| module_init(cw1200_sdio_init); |
| module_exit(cw1200_sdio_exit); |