| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Imagination Technologies Pulse Width Modulator driver |
| * |
| * Copyright (c) 2014-2015, Imagination Technologies |
| * |
| * Based on drivers/pwm/pwm-tegra.c, Copyright (c) 2010, NVIDIA Corporation |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/pwm.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| /* PWM registers */ |
| #define PWM_CTRL_CFG 0x0000 |
| #define PWM_CTRL_CFG_NO_SUB_DIV 0 |
| #define PWM_CTRL_CFG_SUB_DIV0 1 |
| #define PWM_CTRL_CFG_SUB_DIV1 2 |
| #define PWM_CTRL_CFG_SUB_DIV0_DIV1 3 |
| #define PWM_CTRL_CFG_DIV_SHIFT(ch) ((ch) * 2 + 4) |
| #define PWM_CTRL_CFG_DIV_MASK 0x3 |
| |
| #define PWM_CH_CFG(ch) (0x4 + (ch) * 4) |
| #define PWM_CH_CFG_TMBASE_SHIFT 0 |
| #define PWM_CH_CFG_DUTY_SHIFT 16 |
| |
| #define PERIP_PWM_PDM_CONTROL 0x0140 |
| #define PERIP_PWM_PDM_CONTROL_CH_MASK 0x1 |
| #define PERIP_PWM_PDM_CONTROL_CH_SHIFT(ch) ((ch) * 4) |
| |
| #define IMG_PWM_PM_TIMEOUT 1000 /* ms */ |
| |
| /* |
| * PWM period is specified with a timebase register, |
| * in number of step periods. The PWM duty cycle is also |
| * specified in step periods, in the [0, $timebase] range. |
| * In other words, the timebase imposes the duty cycle |
| * resolution. Therefore, let's constraint the timebase to |
| * a minimum value to allow a sane range of duty cycle values. |
| * Imposing a minimum timebase, will impose a maximum PWM frequency. |
| * |
| * The value chosen is completely arbitrary. |
| */ |
| #define MIN_TMBASE_STEPS 16 |
| |
| #define IMG_PWM_NPWM 4 |
| |
| struct img_pwm_soc_data { |
| u32 max_timebase; |
| }; |
| |
| struct img_pwm_chip { |
| struct device *dev; |
| struct pwm_chip chip; |
| struct clk *pwm_clk; |
| struct clk *sys_clk; |
| void __iomem *base; |
| struct regmap *periph_regs; |
| int max_period_ns; |
| int min_period_ns; |
| const struct img_pwm_soc_data *data; |
| u32 suspend_ctrl_cfg; |
| u32 suspend_ch_cfg[IMG_PWM_NPWM]; |
| }; |
| |
| static inline struct img_pwm_chip *to_img_pwm_chip(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct img_pwm_chip, chip); |
| } |
| |
| static inline void img_pwm_writel(struct img_pwm_chip *chip, |
| u32 reg, u32 val) |
| { |
| writel(val, chip->base + reg); |
| } |
| |
| static inline u32 img_pwm_readl(struct img_pwm_chip *chip, |
| u32 reg) |
| { |
| return readl(chip->base + reg); |
| } |
| |
| static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| int duty_ns, int period_ns) |
| { |
| u32 val, div, duty, timebase; |
| unsigned long mul, output_clk_hz, input_clk_hz; |
| struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); |
| unsigned int max_timebase = pwm_chip->data->max_timebase; |
| int ret; |
| |
| if (period_ns < pwm_chip->min_period_ns || |
| period_ns > pwm_chip->max_period_ns) { |
| dev_err(chip->dev, "configured period not in range\n"); |
| return -ERANGE; |
| } |
| |
| input_clk_hz = clk_get_rate(pwm_chip->pwm_clk); |
| output_clk_hz = DIV_ROUND_UP(NSEC_PER_SEC, period_ns); |
| |
| mul = DIV_ROUND_UP(input_clk_hz, output_clk_hz); |
| if (mul <= max_timebase) { |
| div = PWM_CTRL_CFG_NO_SUB_DIV; |
| timebase = DIV_ROUND_UP(mul, 1); |
| } else if (mul <= max_timebase * 8) { |
| div = PWM_CTRL_CFG_SUB_DIV0; |
| timebase = DIV_ROUND_UP(mul, 8); |
| } else if (mul <= max_timebase * 64) { |
| div = PWM_CTRL_CFG_SUB_DIV1; |
| timebase = DIV_ROUND_UP(mul, 64); |
| } else if (mul <= max_timebase * 512) { |
| div = PWM_CTRL_CFG_SUB_DIV0_DIV1; |
| timebase = DIV_ROUND_UP(mul, 512); |
| } else { |
| dev_err(chip->dev, |
| "failed to configure timebase steps/divider value\n"); |
| return -EINVAL; |
| } |
| |
| duty = DIV_ROUND_UP(timebase * duty_ns, period_ns); |
| |
| ret = pm_runtime_get_sync(chip->dev); |
| if (ret < 0) { |
| pm_runtime_put_autosuspend(chip->dev); |
| return ret; |
| } |
| |
| val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); |
| val &= ~(PWM_CTRL_CFG_DIV_MASK << PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm)); |
| val |= (div & PWM_CTRL_CFG_DIV_MASK) << |
| PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm); |
| img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); |
| |
| val = (duty << PWM_CH_CFG_DUTY_SHIFT) | |
| (timebase << PWM_CH_CFG_TMBASE_SHIFT); |
| img_pwm_writel(pwm_chip, PWM_CH_CFG(pwm->hwpwm), val); |
| |
| pm_runtime_mark_last_busy(chip->dev); |
| pm_runtime_put_autosuspend(chip->dev); |
| |
| return 0; |
| } |
| |
| static int img_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| u32 val; |
| struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); |
| int ret; |
| |
| ret = pm_runtime_resume_and_get(chip->dev); |
| if (ret < 0) |
| return ret; |
| |
| val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); |
| val |= BIT(pwm->hwpwm); |
| img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); |
| |
| regmap_update_bits(pwm_chip->periph_regs, PERIP_PWM_PDM_CONTROL, |
| PERIP_PWM_PDM_CONTROL_CH_MASK << |
| PERIP_PWM_PDM_CONTROL_CH_SHIFT(pwm->hwpwm), 0); |
| |
| return 0; |
| } |
| |
| static void img_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| u32 val; |
| struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); |
| |
| val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); |
| val &= ~BIT(pwm->hwpwm); |
| img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); |
| |
| pm_runtime_mark_last_busy(chip->dev); |
| pm_runtime_put_autosuspend(chip->dev); |
| } |
| |
| static const struct pwm_ops img_pwm_ops = { |
| .config = img_pwm_config, |
| .enable = img_pwm_enable, |
| .disable = img_pwm_disable, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct img_pwm_soc_data pistachio_pwm = { |
| .max_timebase = 255, |
| }; |
| |
| static const struct of_device_id img_pwm_of_match[] = { |
| { |
| .compatible = "img,pistachio-pwm", |
| .data = &pistachio_pwm, |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, img_pwm_of_match); |
| |
| static int img_pwm_runtime_suspend(struct device *dev) |
| { |
| struct img_pwm_chip *pwm_chip = dev_get_drvdata(dev); |
| |
| clk_disable_unprepare(pwm_chip->pwm_clk); |
| clk_disable_unprepare(pwm_chip->sys_clk); |
| |
| return 0; |
| } |
| |
| static int img_pwm_runtime_resume(struct device *dev) |
| { |
| struct img_pwm_chip *pwm_chip = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = clk_prepare_enable(pwm_chip->sys_clk); |
| if (ret < 0) { |
| dev_err(dev, "could not prepare or enable sys clock\n"); |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(pwm_chip->pwm_clk); |
| if (ret < 0) { |
| dev_err(dev, "could not prepare or enable pwm clock\n"); |
| clk_disable_unprepare(pwm_chip->sys_clk); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int img_pwm_probe(struct platform_device *pdev) |
| { |
| int ret; |
| u64 val; |
| unsigned long clk_rate; |
| struct img_pwm_chip *pwm; |
| const struct of_device_id *of_dev_id; |
| |
| pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); |
| if (!pwm) |
| return -ENOMEM; |
| |
| pwm->dev = &pdev->dev; |
| |
| pwm->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(pwm->base)) |
| return PTR_ERR(pwm->base); |
| |
| of_dev_id = of_match_device(img_pwm_of_match, &pdev->dev); |
| if (!of_dev_id) |
| return -ENODEV; |
| pwm->data = of_dev_id->data; |
| |
| pwm->periph_regs = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, |
| "img,cr-periph"); |
| if (IS_ERR(pwm->periph_regs)) |
| return PTR_ERR(pwm->periph_regs); |
| |
| pwm->sys_clk = devm_clk_get(&pdev->dev, "sys"); |
| if (IS_ERR(pwm->sys_clk)) { |
| dev_err(&pdev->dev, "failed to get system clock\n"); |
| return PTR_ERR(pwm->sys_clk); |
| } |
| |
| pwm->pwm_clk = devm_clk_get(&pdev->dev, "pwm"); |
| if (IS_ERR(pwm->pwm_clk)) { |
| dev_err(&pdev->dev, "failed to get pwm clock\n"); |
| return PTR_ERR(pwm->pwm_clk); |
| } |
| |
| platform_set_drvdata(pdev, pwm); |
| |
| pm_runtime_set_autosuspend_delay(&pdev->dev, IMG_PWM_PM_TIMEOUT); |
| pm_runtime_use_autosuspend(&pdev->dev); |
| pm_runtime_enable(&pdev->dev); |
| if (!pm_runtime_enabled(&pdev->dev)) { |
| ret = img_pwm_runtime_resume(&pdev->dev); |
| if (ret) |
| goto err_pm_disable; |
| } |
| |
| clk_rate = clk_get_rate(pwm->pwm_clk); |
| if (!clk_rate) { |
| dev_err(&pdev->dev, "pwm clock has no frequency\n"); |
| ret = -EINVAL; |
| goto err_suspend; |
| } |
| |
| /* The maximum input clock divider is 512 */ |
| val = (u64)NSEC_PER_SEC * 512 * pwm->data->max_timebase; |
| do_div(val, clk_rate); |
| pwm->max_period_ns = val; |
| |
| val = (u64)NSEC_PER_SEC * MIN_TMBASE_STEPS; |
| do_div(val, clk_rate); |
| pwm->min_period_ns = val; |
| |
| pwm->chip.dev = &pdev->dev; |
| pwm->chip.ops = &img_pwm_ops; |
| pwm->chip.npwm = IMG_PWM_NPWM; |
| |
| ret = pwmchip_add(&pwm->chip); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret); |
| goto err_suspend; |
| } |
| |
| return 0; |
| |
| err_suspend: |
| if (!pm_runtime_enabled(&pdev->dev)) |
| img_pwm_runtime_suspend(&pdev->dev); |
| err_pm_disable: |
| pm_runtime_disable(&pdev->dev); |
| pm_runtime_dont_use_autosuspend(&pdev->dev); |
| return ret; |
| } |
| |
| static int img_pwm_remove(struct platform_device *pdev) |
| { |
| struct img_pwm_chip *pwm_chip = platform_get_drvdata(pdev); |
| u32 val; |
| unsigned int i; |
| int ret; |
| |
| ret = pm_runtime_get_sync(&pdev->dev); |
| if (ret < 0) { |
| pm_runtime_put(&pdev->dev); |
| return ret; |
| } |
| |
| for (i = 0; i < pwm_chip->chip.npwm; i++) { |
| val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); |
| val &= ~BIT(i); |
| img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); |
| } |
| |
| pm_runtime_put(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| if (!pm_runtime_status_suspended(&pdev->dev)) |
| img_pwm_runtime_suspend(&pdev->dev); |
| |
| return pwmchip_remove(&pwm_chip->chip); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int img_pwm_suspend(struct device *dev) |
| { |
| struct img_pwm_chip *pwm_chip = dev_get_drvdata(dev); |
| int i, ret; |
| |
| if (pm_runtime_status_suspended(dev)) { |
| ret = img_pwm_runtime_resume(dev); |
| if (ret) |
| return ret; |
| } |
| |
| for (i = 0; i < pwm_chip->chip.npwm; i++) |
| pwm_chip->suspend_ch_cfg[i] = img_pwm_readl(pwm_chip, |
| PWM_CH_CFG(i)); |
| |
| pwm_chip->suspend_ctrl_cfg = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); |
| |
| img_pwm_runtime_suspend(dev); |
| |
| return 0; |
| } |
| |
| static int img_pwm_resume(struct device *dev) |
| { |
| struct img_pwm_chip *pwm_chip = dev_get_drvdata(dev); |
| int ret; |
| int i; |
| |
| ret = img_pwm_runtime_resume(dev); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < pwm_chip->chip.npwm; i++) |
| img_pwm_writel(pwm_chip, PWM_CH_CFG(i), |
| pwm_chip->suspend_ch_cfg[i]); |
| |
| img_pwm_writel(pwm_chip, PWM_CTRL_CFG, pwm_chip->suspend_ctrl_cfg); |
| |
| for (i = 0; i < pwm_chip->chip.npwm; i++) |
| if (pwm_chip->suspend_ctrl_cfg & BIT(i)) |
| regmap_update_bits(pwm_chip->periph_regs, |
| PERIP_PWM_PDM_CONTROL, |
| PERIP_PWM_PDM_CONTROL_CH_MASK << |
| PERIP_PWM_PDM_CONTROL_CH_SHIFT(i), |
| 0); |
| |
| if (pm_runtime_status_suspended(dev)) |
| img_pwm_runtime_suspend(dev); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| static const struct dev_pm_ops img_pwm_pm_ops = { |
| SET_RUNTIME_PM_OPS(img_pwm_runtime_suspend, |
| img_pwm_runtime_resume, |
| NULL) |
| SET_SYSTEM_SLEEP_PM_OPS(img_pwm_suspend, img_pwm_resume) |
| }; |
| |
| static struct platform_driver img_pwm_driver = { |
| .driver = { |
| .name = "img-pwm", |
| .pm = &img_pwm_pm_ops, |
| .of_match_table = img_pwm_of_match, |
| }, |
| .probe = img_pwm_probe, |
| .remove = img_pwm_remove, |
| }; |
| module_platform_driver(img_pwm_driver); |
| |
| MODULE_AUTHOR("Sai Masarapu <Sai.Masarapu@imgtec.com>"); |
| MODULE_DESCRIPTION("Imagination Technologies PWM DAC driver"); |
| MODULE_LICENSE("GPL v2"); |