Documentation/devicetree/bindings/clock/at91-clock.txt

Device Tree Clock bindings for arch-at91

This binding uses the common clock binding[1].

[1] Documentation/devicetree/bindings/clock/clock-bindings.txt

Slow Clock controller:

Required properties:
- compatible : shall be one of the following:
	"atmel,at91sam9x5-sckc" or
	"atmel,sama5d4-sckc":
		at91 SCKC (Slow Clock Controller)
		This node contains the slow clock definitions.

	"atmel,at91sam9x5-clk-slow-osc":
		at91 slow oscillator

	"atmel,at91sam9x5-clk-slow-rc-osc":
		at91 internal slow RC oscillator
- reg : defines the IO memory reserved for the SCKC.
- #size-cells : shall be 0 (reg is used to encode clk id).
- #address-cells : shall be 1 (reg is used to encode clk id).


For example:
	sckc: sckc@fffffe50 {
		compatible = "atmel,sama5d3-pmc";
		reg = <0xfffffe50 0x4>
		#size-cells = <0>;
		#address-cells = <1>;

		/* put at91 slow clocks here */
	};

Power Management Controller (PMC):

Required properties:
- compatible : shall be "atmel,<chip>-pmc", "syscon":
	<chip> can be: at91rm9200, at91sam9260, at91sam9261,
	at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
	at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
	sama5d2, sama5d3 or sama5d4.
- #clock-cells : from common clock binding; shall be set to 2. The first entry
  is the type of the clock (core, system, peripheral or generated) and the
  second entry its index as provided by the datasheet
- clocks : Must contain an entry for each entry in clock-names.
- clock-names: Must include the following entries: "slow_clk", "main_xtal"

Optional properties:
- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
  provided on XIN.

For example:
	pmc: pmc@f0018000 {
		compatible = "atmel,sama5d4-pmc", "syscon";
		reg = <0xf0018000 0x120>;
		interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
		#clock-cells = <2>;
		clocks = <&clk32k>, <&main_xtal>;
		clock-names = "slow_clk", "main_xtal";
	};