| * Clock bindings for NXP i.MX8M Mini |
| |
| Required properties: |
| - compatible: Should be "fsl,imx8mm-ccm" |
| - reg: Address and length of the register set |
| - #clock-cells: Should be <1> |
| - clocks: list of clock specifiers, must contain an entry for each required |
| entry in clock-names |
| - clock-names: should include the following entries: |
| - "osc_32k" |
| - "osc_24m" |
| - "clk_ext1" |
| - "clk_ext2" |
| - "clk_ext3" |
| - "clk_ext4" |
| |
| clk: clock-controller@30380000 { |
| compatible = "fsl,imx8mm-ccm"; |
| reg = <0x0 0x30380000 0x0 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, |
| <&clk_ext3>, <&clk_ext4>; |
| clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", |
| "clk_ext3", "clk_ext4"; |
| }; |
| |
| The clock consumer should specify the desired clock by having the clock |
| ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h |
| for the full list of i.MX8M Mini clock IDs. |
