| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| Mantis PCI bridge driver |
| |
| Copyright (C) Manu Abraham (abraham.manu@gmail.com) |
| |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/kernel.h> |
| #include <asm/io.h> |
| #include <asm/page.h> |
| #include <linux/kmod.h> |
| #include <linux/vmalloc.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/pci.h> |
| |
| #include <asm/irq.h> |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| |
| #include <media/dmxdev.h> |
| #include <media/dvbdev.h> |
| #include <media/dvb_demux.h> |
| #include <media/dvb_frontend.h> |
| #include <media/dvb_net.h> |
| |
| #include "mantis_common.h" |
| #include "mantis_reg.h" |
| #include "mantis_pci.h" |
| |
| #define DRIVER_NAME "Mantis Core" |
| |
| int mantis_pci_init(struct mantis_pci *mantis) |
| { |
| u8 latency; |
| struct mantis_hwconfig *config = mantis->hwconfig; |
| struct pci_dev *pdev = mantis->pdev; |
| int err, ret = 0; |
| |
| dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n", |
| config->model_name, |
| config->dev_type, |
| mantis->pdev->bus->number, |
| PCI_SLOT(mantis->pdev->devfn), |
| PCI_FUNC(mantis->pdev->devfn)); |
| |
| err = pci_enable_device(pdev); |
| if (err != 0) { |
| ret = -ENODEV; |
| dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err); |
| goto fail0; |
| } |
| |
| err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (err != 0) { |
| dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err); |
| ret = -ENOMEM; |
| goto fail1; |
| } |
| |
| pci_set_master(pdev); |
| |
| if (!request_mem_region(pci_resource_start(pdev, 0), |
| pci_resource_len(pdev, 0), |
| DRIVER_NAME)) { |
| |
| dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !"); |
| ret = -ENODEV; |
| goto fail1; |
| } |
| |
| mantis->mmio = ioremap(pci_resource_start(pdev, 0), |
| pci_resource_len(pdev, 0)); |
| |
| if (!mantis->mmio) { |
| dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !"); |
| ret = -ENODEV; |
| goto fail2; |
| } |
| |
| pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency); |
| mantis->latency = latency; |
| mantis->revision = pdev->revision; |
| |
| dprintk(MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ", |
| mantis->revision, |
| mantis->pdev->subsystem_vendor, |
| mantis->pdev->subsystem_device); |
| |
| dprintk(MANTIS_ERROR, 0, |
| "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n", |
| mantis->pdev->irq, |
| mantis->latency, |
| mantis->mantis_addr, |
| mantis->mmio); |
| |
| err = request_irq(pdev->irq, |
| config->irq_handler, |
| IRQF_SHARED, |
| DRIVER_NAME, |
| mantis); |
| |
| if (err != 0) { |
| |
| dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err); |
| ret = -ENODEV; |
| goto fail3; |
| } |
| |
| pci_set_drvdata(pdev, mantis); |
| return ret; |
| |
| /* Error conditions */ |
| fail3: |
| dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret); |
| if (mantis->mmio) |
| iounmap(mantis->mmio); |
| |
| fail2: |
| dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret); |
| release_mem_region(pci_resource_start(pdev, 0), |
| pci_resource_len(pdev, 0)); |
| |
| fail1: |
| dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret); |
| pci_disable_device(pdev); |
| |
| fail0: |
| dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(mantis_pci_init); |
| |
| void mantis_pci_exit(struct mantis_pci *mantis) |
| { |
| struct pci_dev *pdev = mantis->pdev; |
| |
| dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio); |
| free_irq(pdev->irq, mantis); |
| if (mantis->mmio) { |
| iounmap(mantis->mmio); |
| release_mem_region(pci_resource_start(pdev, 0), |
| pci_resource_len(pdev, 0)); |
| } |
| |
| pci_disable_device(pdev); |
| } |
| EXPORT_SYMBOL_GPL(mantis_pci_exit); |
| |
| MODULE_DESCRIPTION("Mantis PCI DTV bridge driver"); |
| MODULE_AUTHOR("Manu Abraham"); |
| MODULE_LICENSE("GPL"); |