| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2010-2013 Bluecherry, LLC <https://www.bluecherrydvr.com> |
| * |
| * Original author: |
| * Ben Collins <bcollins@ubuntu.com> |
| * |
| * Additional work by: |
| * John Brooks <john.brooks@bluecherry.net> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/mempool.h> |
| #include <linux/poll.h> |
| #include <linux/kthread.h> |
| #include <linux/freezer.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| |
| #include <sound/core.h> |
| #include <sound/initval.h> |
| #include <sound/pcm.h> |
| #include <sound/control.h> |
| |
| #include "solo6x10.h" |
| #include "solo6x10-tw28.h" |
| |
| #define G723_FDMA_PAGES 32 |
| #define G723_PERIOD_BYTES 48 |
| #define G723_PERIOD_BLOCK 1024 |
| #define G723_FRAMES_PER_PAGE 48 |
| |
| /* Sets up channels 16-19 for decoding and 0-15 for encoding */ |
| #define OUTMODE_MASK 0x300 |
| |
| #define SAMPLERATE 8000 |
| #define BITRATE 25 |
| |
| /* The solo writes to 1k byte pages, 32 pages, in the dma. Each 1k page |
| * is broken down to 20 * 48 byte regions (one for each channel possible) |
| * with the rest of the page being dummy data. */ |
| #define PERIODS G723_FDMA_PAGES |
| #define G723_INTR_ORDER 4 /* 0 - 4 */ |
| |
| struct solo_snd_pcm { |
| int on; |
| spinlock_t lock; |
| struct solo_dev *solo_dev; |
| u8 *g723_buf; |
| dma_addr_t g723_dma; |
| }; |
| |
| static void solo_g723_config(struct solo_dev *solo_dev) |
| { |
| int clk_div; |
| |
| clk_div = (solo_dev->clock_mhz * 1000000) |
| / (SAMPLERATE * (BITRATE * 2) * 2); |
| |
| solo_reg_write(solo_dev, SOLO_AUDIO_SAMPLE, |
| SOLO_AUDIO_BITRATE(BITRATE) |
| | SOLO_AUDIO_CLK_DIV(clk_div)); |
| |
| solo_reg_write(solo_dev, SOLO_AUDIO_FDMA_INTR, |
| SOLO_AUDIO_FDMA_INTERVAL(1) |
| | SOLO_AUDIO_INTR_ORDER(G723_INTR_ORDER) |
| | SOLO_AUDIO_FDMA_BASE(SOLO_G723_EXT_ADDR(solo_dev) >> 16)); |
| |
| solo_reg_write(solo_dev, SOLO_AUDIO_CONTROL, |
| SOLO_AUDIO_ENABLE |
| | SOLO_AUDIO_I2S_MODE |
| | SOLO_AUDIO_I2S_MULTI(3) |
| | SOLO_AUDIO_MODE(OUTMODE_MASK)); |
| } |
| |
| void solo_g723_isr(struct solo_dev *solo_dev) |
| { |
| struct snd_pcm_str *pstr = |
| &solo_dev->snd_pcm->streams[SNDRV_PCM_STREAM_CAPTURE]; |
| struct snd_pcm_substream *ss; |
| struct solo_snd_pcm *solo_pcm; |
| |
| for (ss = pstr->substream; ss != NULL; ss = ss->next) { |
| if (snd_pcm_substream_chip(ss) == NULL) |
| continue; |
| |
| /* This means open() hasn't been called on this one */ |
| if (snd_pcm_substream_chip(ss) == solo_dev) |
| continue; |
| |
| /* Haven't triggered a start yet */ |
| solo_pcm = snd_pcm_substream_chip(ss); |
| if (!solo_pcm->on) |
| continue; |
| |
| snd_pcm_period_elapsed(ss); |
| } |
| } |
| |
| static const struct snd_pcm_hardware snd_solo_pcm_hw = { |
| .info = (SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | |
| SNDRV_PCM_INFO_MMAP_VALID), |
| .formats = SNDRV_PCM_FMTBIT_U8, |
| .rates = SNDRV_PCM_RATE_8000, |
| .rate_min = SAMPLERATE, |
| .rate_max = SAMPLERATE, |
| .channels_min = 1, |
| .channels_max = 1, |
| .buffer_bytes_max = G723_PERIOD_BYTES * PERIODS, |
| .period_bytes_min = G723_PERIOD_BYTES, |
| .period_bytes_max = G723_PERIOD_BYTES, |
| .periods_min = PERIODS, |
| .periods_max = PERIODS, |
| }; |
| |
| static int snd_solo_pcm_open(struct snd_pcm_substream *ss) |
| { |
| struct solo_dev *solo_dev = snd_pcm_substream_chip(ss); |
| struct solo_snd_pcm *solo_pcm; |
| |
| solo_pcm = kzalloc(sizeof(*solo_pcm), GFP_KERNEL); |
| if (solo_pcm == NULL) |
| goto oom; |
| |
| solo_pcm->g723_buf = pci_alloc_consistent(solo_dev->pdev, |
| G723_PERIOD_BYTES, |
| &solo_pcm->g723_dma); |
| if (solo_pcm->g723_buf == NULL) |
| goto oom; |
| |
| spin_lock_init(&solo_pcm->lock); |
| solo_pcm->solo_dev = solo_dev; |
| ss->runtime->hw = snd_solo_pcm_hw; |
| |
| snd_pcm_substream_chip(ss) = solo_pcm; |
| |
| return 0; |
| |
| oom: |
| kfree(solo_pcm); |
| return -ENOMEM; |
| } |
| |
| static int snd_solo_pcm_close(struct snd_pcm_substream *ss) |
| { |
| struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss); |
| |
| snd_pcm_substream_chip(ss) = solo_pcm->solo_dev; |
| pci_free_consistent(solo_pcm->solo_dev->pdev, G723_PERIOD_BYTES, |
| solo_pcm->g723_buf, solo_pcm->g723_dma); |
| kfree(solo_pcm); |
| |
| return 0; |
| } |
| |
| static int snd_solo_pcm_trigger(struct snd_pcm_substream *ss, int cmd) |
| { |
| struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss); |
| struct solo_dev *solo_dev = solo_pcm->solo_dev; |
| int ret = 0; |
| |
| spin_lock(&solo_pcm->lock); |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| if (solo_pcm->on == 0) { |
| /* If this is the first user, switch on interrupts */ |
| if (atomic_inc_return(&solo_dev->snd_users) == 1) |
| solo_irq_on(solo_dev, SOLO_IRQ_G723); |
| solo_pcm->on = 1; |
| } |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| if (solo_pcm->on) { |
| /* If this was our last user, switch them off */ |
| if (atomic_dec_return(&solo_dev->snd_users) == 0) |
| solo_irq_off(solo_dev, SOLO_IRQ_G723); |
| solo_pcm->on = 0; |
| } |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| spin_unlock(&solo_pcm->lock); |
| |
| return ret; |
| } |
| |
| static int snd_solo_pcm_prepare(struct snd_pcm_substream *ss) |
| { |
| return 0; |
| } |
| |
| static snd_pcm_uframes_t snd_solo_pcm_pointer(struct snd_pcm_substream *ss) |
| { |
| struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss); |
| struct solo_dev *solo_dev = solo_pcm->solo_dev; |
| snd_pcm_uframes_t idx = solo_reg_read(solo_dev, SOLO_AUDIO_STA) & 0x1f; |
| |
| return idx * G723_FRAMES_PER_PAGE; |
| } |
| |
| static int snd_solo_pcm_copy_user(struct snd_pcm_substream *ss, int channel, |
| unsigned long pos, void __user *dst, |
| unsigned long count) |
| { |
| struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss); |
| struct solo_dev *solo_dev = solo_pcm->solo_dev; |
| int err, i; |
| |
| for (i = 0; i < (count / G723_FRAMES_PER_PAGE); i++) { |
| int page = (pos / G723_FRAMES_PER_PAGE) + i; |
| |
| err = solo_p2m_dma_t(solo_dev, 0, solo_pcm->g723_dma, |
| SOLO_G723_EXT_ADDR(solo_dev) + |
| (page * G723_PERIOD_BLOCK) + |
| (ss->number * G723_PERIOD_BYTES), |
| G723_PERIOD_BYTES, 0, 0); |
| if (err) |
| return err; |
| |
| if (copy_to_user(dst, solo_pcm->g723_buf, G723_PERIOD_BYTES)) |
| return -EFAULT; |
| dst += G723_PERIOD_BYTES; |
| } |
| |
| return 0; |
| } |
| |
| static int snd_solo_pcm_copy_kernel(struct snd_pcm_substream *ss, int channel, |
| unsigned long pos, void *dst, |
| unsigned long count) |
| { |
| struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss); |
| struct solo_dev *solo_dev = solo_pcm->solo_dev; |
| int err, i; |
| |
| for (i = 0; i < (count / G723_FRAMES_PER_PAGE); i++) { |
| int page = (pos / G723_FRAMES_PER_PAGE) + i; |
| |
| err = solo_p2m_dma_t(solo_dev, 0, solo_pcm->g723_dma, |
| SOLO_G723_EXT_ADDR(solo_dev) + |
| (page * G723_PERIOD_BLOCK) + |
| (ss->number * G723_PERIOD_BYTES), |
| G723_PERIOD_BYTES, 0, 0); |
| if (err) |
| return err; |
| |
| memcpy(dst, solo_pcm->g723_buf, G723_PERIOD_BYTES); |
| dst += G723_PERIOD_BYTES; |
| } |
| |
| return 0; |
| } |
| |
| static const struct snd_pcm_ops snd_solo_pcm_ops = { |
| .open = snd_solo_pcm_open, |
| .close = snd_solo_pcm_close, |
| .prepare = snd_solo_pcm_prepare, |
| .trigger = snd_solo_pcm_trigger, |
| .pointer = snd_solo_pcm_pointer, |
| .copy_user = snd_solo_pcm_copy_user, |
| .copy_kernel = snd_solo_pcm_copy_kernel, |
| }; |
| |
| static int snd_solo_capture_volume_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *info) |
| { |
| info->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| info->count = 1; |
| info->value.integer.min = 0; |
| info->value.integer.max = 15; |
| info->value.integer.step = 1; |
| |
| return 0; |
| } |
| |
| static int snd_solo_capture_volume_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *value) |
| { |
| struct solo_dev *solo_dev = snd_kcontrol_chip(kcontrol); |
| u8 ch = value->id.numid - 1; |
| |
| value->value.integer.value[0] = tw28_get_audio_gain(solo_dev, ch); |
| |
| return 0; |
| } |
| |
| static int snd_solo_capture_volume_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *value) |
| { |
| struct solo_dev *solo_dev = snd_kcontrol_chip(kcontrol); |
| u8 ch = value->id.numid - 1; |
| u8 old_val; |
| |
| old_val = tw28_get_audio_gain(solo_dev, ch); |
| if (old_val == value->value.integer.value[0]) |
| return 0; |
| |
| tw28_set_audio_gain(solo_dev, ch, value->value.integer.value[0]); |
| |
| return 1; |
| } |
| |
| static const struct snd_kcontrol_new snd_solo_capture_volume = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Capture Volume", |
| .info = snd_solo_capture_volume_info, |
| .get = snd_solo_capture_volume_get, |
| .put = snd_solo_capture_volume_put, |
| }; |
| |
| static int solo_snd_pcm_init(struct solo_dev *solo_dev) |
| { |
| struct snd_card *card = solo_dev->snd_card; |
| struct snd_pcm *pcm; |
| struct snd_pcm_substream *ss; |
| int ret; |
| int i; |
| |
| ret = snd_pcm_new(card, card->driver, 0, 0, solo_dev->nr_chans, |
| &pcm); |
| if (ret < 0) |
| return ret; |
| |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, |
| &snd_solo_pcm_ops); |
| |
| snd_pcm_chip(pcm) = solo_dev; |
| pcm->info_flags = 0; |
| strscpy(pcm->name, card->shortname, sizeof(pcm->name)); |
| |
| for (i = 0, ss = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream; |
| ss; ss = ss->next, i++) |
| sprintf(ss->name, "Camera #%d Audio", i); |
| |
| snd_pcm_set_managed_buffer_all(pcm, |
| SNDRV_DMA_TYPE_CONTINUOUS, |
| NULL, |
| G723_PERIOD_BYTES * PERIODS, |
| G723_PERIOD_BYTES * PERIODS); |
| |
| solo_dev->snd_pcm = pcm; |
| |
| return 0; |
| } |
| |
| int solo_g723_init(struct solo_dev *solo_dev) |
| { |
| static struct snd_device_ops ops = { }; |
| struct snd_card *card; |
| struct snd_kcontrol_new kctl; |
| char name[32]; |
| int ret; |
| |
| atomic_set(&solo_dev->snd_users, 0); |
| |
| /* Allows for easier mapping between video and audio */ |
| sprintf(name, "Softlogic%d", solo_dev->vfd->num); |
| |
| ret = snd_card_new(&solo_dev->pdev->dev, |
| SNDRV_DEFAULT_IDX1, name, THIS_MODULE, 0, |
| &solo_dev->snd_card); |
| if (ret < 0) |
| return ret; |
| |
| card = solo_dev->snd_card; |
| |
| strscpy(card->driver, SOLO6X10_NAME, sizeof(card->driver)); |
| strscpy(card->shortname, "SOLO-6x10 Audio", sizeof(card->shortname)); |
| sprintf(card->longname, "%s on %s IRQ %d", card->shortname, |
| pci_name(solo_dev->pdev), solo_dev->pdev->irq); |
| |
| ret = snd_device_new(card, SNDRV_DEV_LOWLEVEL, solo_dev, &ops); |
| if (ret < 0) |
| goto snd_error; |
| |
| /* Mixer controls */ |
| strscpy(card->mixername, "SOLO-6x10", sizeof(card->mixername)); |
| kctl = snd_solo_capture_volume; |
| kctl.count = solo_dev->nr_chans; |
| |
| ret = snd_ctl_add(card, snd_ctl_new1(&kctl, solo_dev)); |
| if (ret < 0) |
| goto snd_error; |
| |
| ret = solo_snd_pcm_init(solo_dev); |
| if (ret < 0) |
| goto snd_error; |
| |
| ret = snd_card_register(card); |
| if (ret < 0) |
| goto snd_error; |
| |
| solo_g723_config(solo_dev); |
| |
| dev_info(&solo_dev->pdev->dev, "Alsa sound card as %s\n", name); |
| |
| return 0; |
| |
| snd_error: |
| snd_card_free(card); |
| return ret; |
| } |
| |
| void solo_g723_exit(struct solo_dev *solo_dev) |
| { |
| if (!solo_dev->snd_card) |
| return; |
| |
| solo_reg_write(solo_dev, SOLO_AUDIO_CONTROL, 0); |
| solo_irq_off(solo_dev, SOLO_IRQ_G723); |
| |
| snd_card_free(solo_dev->snd_card); |
| solo_dev->snd_card = NULL; |
| } |