| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2018 Oracle. All Rights Reserved. |
| * Author: Darrick J. Wong <darrick.wong@oracle.com> |
| */ |
| #include <linux/module.h> |
| #include <linux/compiler.h> |
| #include <linux/fs.h> |
| #include <linux/iomap.h> |
| #include <linux/swap.h> |
| |
| /* Swapfile activation */ |
| |
| struct iomap_swapfile_info { |
| struct iomap iomap; /* accumulated iomap */ |
| struct swap_info_struct *sis; |
| uint64_t lowest_ppage; /* lowest physical addr seen (pages) */ |
| uint64_t highest_ppage; /* highest physical addr seen (pages) */ |
| unsigned long nr_pages; /* number of pages collected */ |
| int nr_extents; /* extent count */ |
| }; |
| |
| /* |
| * Collect physical extents for this swap file. Physical extents reported to |
| * the swap code must be trimmed to align to a page boundary. The logical |
| * offset within the file is irrelevant since the swapfile code maps logical |
| * page numbers of the swap device to the physical page-aligned extents. |
| */ |
| static int iomap_swapfile_add_extent(struct iomap_swapfile_info *isi) |
| { |
| struct iomap *iomap = &isi->iomap; |
| unsigned long nr_pages; |
| unsigned long max_pages; |
| uint64_t first_ppage; |
| uint64_t first_ppage_reported; |
| uint64_t next_ppage; |
| int error; |
| |
| if (unlikely(isi->nr_pages >= isi->sis->max)) |
| return 0; |
| max_pages = isi->sis->max - isi->nr_pages; |
| |
| /* |
| * Round the start up and the end down so that the physical |
| * extent aligns to a page boundary. |
| */ |
| first_ppage = ALIGN(iomap->addr, PAGE_SIZE) >> PAGE_SHIFT; |
| next_ppage = ALIGN_DOWN(iomap->addr + iomap->length, PAGE_SIZE) >> |
| PAGE_SHIFT; |
| |
| /* Skip too-short physical extents. */ |
| if (first_ppage >= next_ppage) |
| return 0; |
| nr_pages = next_ppage - first_ppage; |
| nr_pages = min(nr_pages, max_pages); |
| |
| /* |
| * Calculate how much swap space we're adding; the first page contains |
| * the swap header and doesn't count. The mm still wants that first |
| * page fed to add_swap_extent, however. |
| */ |
| first_ppage_reported = first_ppage; |
| if (iomap->offset == 0) |
| first_ppage_reported++; |
| if (isi->lowest_ppage > first_ppage_reported) |
| isi->lowest_ppage = first_ppage_reported; |
| if (isi->highest_ppage < (next_ppage - 1)) |
| isi->highest_ppage = next_ppage - 1; |
| |
| /* Add extent, set up for the next call. */ |
| error = add_swap_extent(isi->sis, isi->nr_pages, nr_pages, first_ppage); |
| if (error < 0) |
| return error; |
| isi->nr_extents += error; |
| isi->nr_pages += nr_pages; |
| return 0; |
| } |
| |
| /* |
| * Accumulate iomaps for this swap file. We have to accumulate iomaps because |
| * swap only cares about contiguous page-aligned physical extents and makes no |
| * distinction between written and unwritten extents. |
| */ |
| static loff_t iomap_swapfile_activate_actor(struct inode *inode, loff_t pos, |
| loff_t count, void *data, struct iomap *iomap, |
| struct iomap *srcmap) |
| { |
| struct iomap_swapfile_info *isi = data; |
| int error; |
| |
| switch (iomap->type) { |
| case IOMAP_MAPPED: |
| case IOMAP_UNWRITTEN: |
| /* Only real or unwritten extents. */ |
| break; |
| case IOMAP_INLINE: |
| /* No inline data. */ |
| pr_err("swapon: file is inline\n"); |
| return -EINVAL; |
| default: |
| pr_err("swapon: file has unallocated extents\n"); |
| return -EINVAL; |
| } |
| |
| /* No uncommitted metadata or shared blocks. */ |
| if (iomap->flags & IOMAP_F_DIRTY) { |
| pr_err("swapon: file is not committed\n"); |
| return -EINVAL; |
| } |
| if (iomap->flags & IOMAP_F_SHARED) { |
| pr_err("swapon: file has shared extents\n"); |
| return -EINVAL; |
| } |
| |
| /* Only one bdev per swap file. */ |
| if (iomap->bdev != isi->sis->bdev) { |
| pr_err("swapon: file is on multiple devices\n"); |
| return -EINVAL; |
| } |
| |
| if (isi->iomap.length == 0) { |
| /* No accumulated extent, so just store it. */ |
| memcpy(&isi->iomap, iomap, sizeof(isi->iomap)); |
| } else if (isi->iomap.addr + isi->iomap.length == iomap->addr) { |
| /* Append this to the accumulated extent. */ |
| isi->iomap.length += iomap->length; |
| } else { |
| /* Otherwise, add the retained iomap and store this one. */ |
| error = iomap_swapfile_add_extent(isi); |
| if (error) |
| return error; |
| memcpy(&isi->iomap, iomap, sizeof(isi->iomap)); |
| } |
| return count; |
| } |
| |
| /* |
| * Iterate a swap file's iomaps to construct physical extents that can be |
| * passed to the swapfile subsystem. |
| */ |
| int iomap_swapfile_activate(struct swap_info_struct *sis, |
| struct file *swap_file, sector_t *pagespan, |
| const struct iomap_ops *ops) |
| { |
| struct iomap_swapfile_info isi = { |
| .sis = sis, |
| .lowest_ppage = (sector_t)-1ULL, |
| }; |
| struct address_space *mapping = swap_file->f_mapping; |
| struct inode *inode = mapping->host; |
| loff_t pos = 0; |
| loff_t len = ALIGN_DOWN(i_size_read(inode), PAGE_SIZE); |
| loff_t ret; |
| |
| /* |
| * Persist all file mapping metadata so that we won't have any |
| * IOMAP_F_DIRTY iomaps. |
| */ |
| ret = vfs_fsync(swap_file, 1); |
| if (ret) |
| return ret; |
| |
| while (len > 0) { |
| ret = iomap_apply(inode, pos, len, IOMAP_REPORT, |
| ops, &isi, iomap_swapfile_activate_actor); |
| if (ret <= 0) |
| return ret; |
| |
| pos += ret; |
| len -= ret; |
| } |
| |
| if (isi.iomap.length) { |
| ret = iomap_swapfile_add_extent(&isi); |
| if (ret) |
| return ret; |
| } |
| |
| /* |
| * If this swapfile doesn't contain even a single page-aligned |
| * contiguous range of blocks, reject this useless swapfile to |
| * prevent confusion later on. |
| */ |
| if (isi.nr_pages == 0) { |
| pr_warn("swapon: Cannot find a single usable page in file.\n"); |
| return -EINVAL; |
| } |
| |
| *pagespan = 1 + isi.highest_ppage - isi.lowest_ppage; |
| sis->max = isi.nr_pages; |
| sis->pages = isi.nr_pages - 1; |
| sis->highest_bit = isi.nr_pages - 1; |
| return isi.nr_extents; |
| } |
| EXPORT_SYMBOL_GPL(iomap_swapfile_activate); |