| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * This file contains helper code to handle channel |
| * settings and keeping track of what is possible at |
| * any point in time. |
| * |
| * Copyright 2009 Johannes Berg <johannes@sipsolutions.net> |
| * Copyright 2013-2014 Intel Mobile Communications GmbH |
| * Copyright 2018-2021 Intel Corporation |
| */ |
| |
| #include <linux/export.h> |
| #include <linux/bitfield.h> |
| #include <net/cfg80211.h> |
| #include "core.h" |
| #include "rdev-ops.h" |
| |
| static bool cfg80211_valid_60g_freq(u32 freq) |
| { |
| return freq >= 58320 && freq <= 70200; |
| } |
| |
| void cfg80211_chandef_create(struct cfg80211_chan_def *chandef, |
| struct ieee80211_channel *chan, |
| enum nl80211_channel_type chan_type) |
| { |
| if (WARN_ON(!chan)) |
| return; |
| |
| chandef->chan = chan; |
| chandef->freq1_offset = chan->freq_offset; |
| chandef->center_freq2 = 0; |
| chandef->edmg.bw_config = 0; |
| chandef->edmg.channels = 0; |
| |
| switch (chan_type) { |
| case NL80211_CHAN_NO_HT: |
| chandef->width = NL80211_CHAN_WIDTH_20_NOHT; |
| chandef->center_freq1 = chan->center_freq; |
| break; |
| case NL80211_CHAN_HT20: |
| chandef->width = NL80211_CHAN_WIDTH_20; |
| chandef->center_freq1 = chan->center_freq; |
| break; |
| case NL80211_CHAN_HT40PLUS: |
| chandef->width = NL80211_CHAN_WIDTH_40; |
| chandef->center_freq1 = chan->center_freq + 10; |
| break; |
| case NL80211_CHAN_HT40MINUS: |
| chandef->width = NL80211_CHAN_WIDTH_40; |
| chandef->center_freq1 = chan->center_freq - 10; |
| break; |
| default: |
| WARN_ON(1); |
| } |
| } |
| EXPORT_SYMBOL(cfg80211_chandef_create); |
| |
| static bool cfg80211_edmg_chandef_valid(const struct cfg80211_chan_def *chandef) |
| { |
| int max_contiguous = 0; |
| int num_of_enabled = 0; |
| int contiguous = 0; |
| int i; |
| |
| if (!chandef->edmg.channels || !chandef->edmg.bw_config) |
| return false; |
| |
| if (!cfg80211_valid_60g_freq(chandef->chan->center_freq)) |
| return false; |
| |
| for (i = 0; i < 6; i++) { |
| if (chandef->edmg.channels & BIT(i)) { |
| contiguous++; |
| num_of_enabled++; |
| } else { |
| contiguous = 0; |
| } |
| |
| max_contiguous = max(contiguous, max_contiguous); |
| } |
| /* basic verification of edmg configuration according to |
| * IEEE P802.11ay/D4.0 section 9.4.2.251 |
| */ |
| /* check bw_config against contiguous edmg channels */ |
| switch (chandef->edmg.bw_config) { |
| case IEEE80211_EDMG_BW_CONFIG_4: |
| case IEEE80211_EDMG_BW_CONFIG_8: |
| case IEEE80211_EDMG_BW_CONFIG_12: |
| if (max_contiguous < 1) |
| return false; |
| break; |
| case IEEE80211_EDMG_BW_CONFIG_5: |
| case IEEE80211_EDMG_BW_CONFIG_9: |
| case IEEE80211_EDMG_BW_CONFIG_13: |
| if (max_contiguous < 2) |
| return false; |
| break; |
| case IEEE80211_EDMG_BW_CONFIG_6: |
| case IEEE80211_EDMG_BW_CONFIG_10: |
| case IEEE80211_EDMG_BW_CONFIG_14: |
| if (max_contiguous < 3) |
| return false; |
| break; |
| case IEEE80211_EDMG_BW_CONFIG_7: |
| case IEEE80211_EDMG_BW_CONFIG_11: |
| case IEEE80211_EDMG_BW_CONFIG_15: |
| if (max_contiguous < 4) |
| return false; |
| break; |
| |
| default: |
| return false; |
| } |
| |
| /* check bw_config against aggregated (non contiguous) edmg channels */ |
| switch (chandef->edmg.bw_config) { |
| case IEEE80211_EDMG_BW_CONFIG_4: |
| case IEEE80211_EDMG_BW_CONFIG_5: |
| case IEEE80211_EDMG_BW_CONFIG_6: |
| case IEEE80211_EDMG_BW_CONFIG_7: |
| break; |
| case IEEE80211_EDMG_BW_CONFIG_8: |
| case IEEE80211_EDMG_BW_CONFIG_9: |
| case IEEE80211_EDMG_BW_CONFIG_10: |
| case IEEE80211_EDMG_BW_CONFIG_11: |
| if (num_of_enabled < 2) |
| return false; |
| break; |
| case IEEE80211_EDMG_BW_CONFIG_12: |
| case IEEE80211_EDMG_BW_CONFIG_13: |
| case IEEE80211_EDMG_BW_CONFIG_14: |
| case IEEE80211_EDMG_BW_CONFIG_15: |
| if (num_of_enabled < 4 || max_contiguous < 2) |
| return false; |
| break; |
| default: |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static int nl80211_chan_width_to_mhz(enum nl80211_chan_width chan_width) |
| { |
| int mhz; |
| |
| switch (chan_width) { |
| case NL80211_CHAN_WIDTH_1: |
| mhz = 1; |
| break; |
| case NL80211_CHAN_WIDTH_2: |
| mhz = 2; |
| break; |
| case NL80211_CHAN_WIDTH_4: |
| mhz = 4; |
| break; |
| case NL80211_CHAN_WIDTH_8: |
| mhz = 8; |
| break; |
| case NL80211_CHAN_WIDTH_16: |
| mhz = 16; |
| break; |
| case NL80211_CHAN_WIDTH_5: |
| mhz = 5; |
| break; |
| case NL80211_CHAN_WIDTH_10: |
| mhz = 10; |
| break; |
| case NL80211_CHAN_WIDTH_20: |
| case NL80211_CHAN_WIDTH_20_NOHT: |
| mhz = 20; |
| break; |
| case NL80211_CHAN_WIDTH_40: |
| mhz = 40; |
| break; |
| case NL80211_CHAN_WIDTH_80P80: |
| case NL80211_CHAN_WIDTH_80: |
| mhz = 80; |
| break; |
| case NL80211_CHAN_WIDTH_160: |
| mhz = 160; |
| break; |
| default: |
| WARN_ON_ONCE(1); |
| return -1; |
| } |
| return mhz; |
| } |
| |
| static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c) |
| { |
| return nl80211_chan_width_to_mhz(c->width); |
| } |
| |
| bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef) |
| { |
| u32 control_freq, oper_freq; |
| int oper_width, control_width; |
| |
| if (!chandef->chan) |
| return false; |
| |
| if (chandef->freq1_offset >= 1000) |
| return false; |
| |
| control_freq = chandef->chan->center_freq; |
| |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_5: |
| case NL80211_CHAN_WIDTH_10: |
| case NL80211_CHAN_WIDTH_20: |
| case NL80211_CHAN_WIDTH_20_NOHT: |
| if (ieee80211_chandef_to_khz(chandef) != |
| ieee80211_channel_to_khz(chandef->chan)) |
| return false; |
| if (chandef->center_freq2) |
| return false; |
| break; |
| case NL80211_CHAN_WIDTH_1: |
| case NL80211_CHAN_WIDTH_2: |
| case NL80211_CHAN_WIDTH_4: |
| case NL80211_CHAN_WIDTH_8: |
| case NL80211_CHAN_WIDTH_16: |
| if (chandef->chan->band != NL80211_BAND_S1GHZ) |
| return false; |
| |
| control_freq = ieee80211_channel_to_khz(chandef->chan); |
| oper_freq = ieee80211_chandef_to_khz(chandef); |
| control_width = nl80211_chan_width_to_mhz( |
| ieee80211_s1g_channel_width( |
| chandef->chan)); |
| oper_width = cfg80211_chandef_get_width(chandef); |
| |
| if (oper_width < 0 || control_width < 0) |
| return false; |
| if (chandef->center_freq2) |
| return false; |
| |
| if (control_freq + MHZ_TO_KHZ(control_width) / 2 > |
| oper_freq + MHZ_TO_KHZ(oper_width) / 2) |
| return false; |
| |
| if (control_freq - MHZ_TO_KHZ(control_width) / 2 < |
| oper_freq - MHZ_TO_KHZ(oper_width) / 2) |
| return false; |
| break; |
| case NL80211_CHAN_WIDTH_40: |
| if (chandef->center_freq1 != control_freq + 10 && |
| chandef->center_freq1 != control_freq - 10) |
| return false; |
| if (chandef->center_freq2) |
| return false; |
| break; |
| case NL80211_CHAN_WIDTH_80P80: |
| if (chandef->center_freq1 != control_freq + 30 && |
| chandef->center_freq1 != control_freq + 10 && |
| chandef->center_freq1 != control_freq - 10 && |
| chandef->center_freq1 != control_freq - 30) |
| return false; |
| if (!chandef->center_freq2) |
| return false; |
| /* adjacent is not allowed -- that's a 160 MHz channel */ |
| if (chandef->center_freq1 - chandef->center_freq2 == 80 || |
| chandef->center_freq2 - chandef->center_freq1 == 80) |
| return false; |
| break; |
| case NL80211_CHAN_WIDTH_80: |
| if (chandef->center_freq1 != control_freq + 30 && |
| chandef->center_freq1 != control_freq + 10 && |
| chandef->center_freq1 != control_freq - 10 && |
| chandef->center_freq1 != control_freq - 30) |
| return false; |
| if (chandef->center_freq2) |
| return false; |
| break; |
| case NL80211_CHAN_WIDTH_160: |
| if (chandef->center_freq1 != control_freq + 70 && |
| chandef->center_freq1 != control_freq + 50 && |
| chandef->center_freq1 != control_freq + 30 && |
| chandef->center_freq1 != control_freq + 10 && |
| chandef->center_freq1 != control_freq - 10 && |
| chandef->center_freq1 != control_freq - 30 && |
| chandef->center_freq1 != control_freq - 50 && |
| chandef->center_freq1 != control_freq - 70) |
| return false; |
| if (chandef->center_freq2) |
| return false; |
| break; |
| default: |
| return false; |
| } |
| |
| /* channel 14 is only for IEEE 802.11b */ |
| if (chandef->center_freq1 == 2484 && |
| chandef->width != NL80211_CHAN_WIDTH_20_NOHT) |
| return false; |
| |
| if (cfg80211_chandef_is_edmg(chandef) && |
| !cfg80211_edmg_chandef_valid(chandef)) |
| return false; |
| |
| return true; |
| } |
| EXPORT_SYMBOL(cfg80211_chandef_valid); |
| |
| static void chandef_primary_freqs(const struct cfg80211_chan_def *c, |
| u32 *pri40, u32 *pri80) |
| { |
| int tmp; |
| |
| switch (c->width) { |
| case NL80211_CHAN_WIDTH_40: |
| *pri40 = c->center_freq1; |
| *pri80 = 0; |
| break; |
| case NL80211_CHAN_WIDTH_80: |
| case NL80211_CHAN_WIDTH_80P80: |
| *pri80 = c->center_freq1; |
| /* n_P20 */ |
| tmp = (30 + c->chan->center_freq - c->center_freq1)/20; |
| /* n_P40 */ |
| tmp /= 2; |
| /* freq_P40 */ |
| *pri40 = c->center_freq1 - 20 + 40 * tmp; |
| break; |
| case NL80211_CHAN_WIDTH_160: |
| /* n_P20 */ |
| tmp = (70 + c->chan->center_freq - c->center_freq1)/20; |
| /* n_P40 */ |
| tmp /= 2; |
| /* freq_P40 */ |
| *pri40 = c->center_freq1 - 60 + 40 * tmp; |
| /* n_P80 */ |
| tmp /= 2; |
| *pri80 = c->center_freq1 - 40 + 80 * tmp; |
| break; |
| default: |
| WARN_ON_ONCE(1); |
| } |
| } |
| |
| const struct cfg80211_chan_def * |
| cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1, |
| const struct cfg80211_chan_def *c2) |
| { |
| u32 c1_pri40, c1_pri80, c2_pri40, c2_pri80; |
| |
| /* If they are identical, return */ |
| if (cfg80211_chandef_identical(c1, c2)) |
| return c1; |
| |
| /* otherwise, must have same control channel */ |
| if (c1->chan != c2->chan) |
| return NULL; |
| |
| /* |
| * If they have the same width, but aren't identical, |
| * then they can't be compatible. |
| */ |
| if (c1->width == c2->width) |
| return NULL; |
| |
| /* |
| * can't be compatible if one of them is 5 or 10 MHz, |
| * but they don't have the same width. |
| */ |
| if (c1->width == NL80211_CHAN_WIDTH_5 || |
| c1->width == NL80211_CHAN_WIDTH_10 || |
| c2->width == NL80211_CHAN_WIDTH_5 || |
| c2->width == NL80211_CHAN_WIDTH_10) |
| return NULL; |
| |
| if (c1->width == NL80211_CHAN_WIDTH_20_NOHT || |
| c1->width == NL80211_CHAN_WIDTH_20) |
| return c2; |
| |
| if (c2->width == NL80211_CHAN_WIDTH_20_NOHT || |
| c2->width == NL80211_CHAN_WIDTH_20) |
| return c1; |
| |
| chandef_primary_freqs(c1, &c1_pri40, &c1_pri80); |
| chandef_primary_freqs(c2, &c2_pri40, &c2_pri80); |
| |
| if (c1_pri40 != c2_pri40) |
| return NULL; |
| |
| WARN_ON(!c1_pri80 && !c2_pri80); |
| if (c1_pri80 && c2_pri80 && c1_pri80 != c2_pri80) |
| return NULL; |
| |
| if (c1->width > c2->width) |
| return c1; |
| return c2; |
| } |
| EXPORT_SYMBOL(cfg80211_chandef_compatible); |
| |
| static void cfg80211_set_chans_dfs_state(struct wiphy *wiphy, u32 center_freq, |
| u32 bandwidth, |
| enum nl80211_dfs_state dfs_state) |
| { |
| struct ieee80211_channel *c; |
| u32 freq; |
| |
| for (freq = center_freq - bandwidth/2 + 10; |
| freq <= center_freq + bandwidth/2 - 10; |
| freq += 20) { |
| c = ieee80211_get_channel(wiphy, freq); |
| if (!c || !(c->flags & IEEE80211_CHAN_RADAR)) |
| continue; |
| |
| c->dfs_state = dfs_state; |
| c->dfs_state_entered = jiffies; |
| } |
| } |
| |
| void cfg80211_set_dfs_state(struct wiphy *wiphy, |
| const struct cfg80211_chan_def *chandef, |
| enum nl80211_dfs_state dfs_state) |
| { |
| int width; |
| |
| if (WARN_ON(!cfg80211_chandef_valid(chandef))) |
| return; |
| |
| width = cfg80211_chandef_get_width(chandef); |
| if (width < 0) |
| return; |
| |
| cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq1, |
| width, dfs_state); |
| |
| if (!chandef->center_freq2) |
| return; |
| cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq2, |
| width, dfs_state); |
| } |
| |
| static u32 cfg80211_get_start_freq(u32 center_freq, |
| u32 bandwidth) |
| { |
| u32 start_freq; |
| |
| bandwidth = MHZ_TO_KHZ(bandwidth); |
| if (bandwidth <= MHZ_TO_KHZ(20)) |
| start_freq = center_freq; |
| else |
| start_freq = center_freq - bandwidth / 2 + MHZ_TO_KHZ(10); |
| |
| return start_freq; |
| } |
| |
| static u32 cfg80211_get_end_freq(u32 center_freq, |
| u32 bandwidth) |
| { |
| u32 end_freq; |
| |
| bandwidth = MHZ_TO_KHZ(bandwidth); |
| if (bandwidth <= MHZ_TO_KHZ(20)) |
| end_freq = center_freq; |
| else |
| end_freq = center_freq + bandwidth / 2 - MHZ_TO_KHZ(10); |
| |
| return end_freq; |
| } |
| |
| static int cfg80211_get_chans_dfs_required(struct wiphy *wiphy, |
| u32 center_freq, |
| u32 bandwidth) |
| { |
| struct ieee80211_channel *c; |
| u32 freq, start_freq, end_freq; |
| |
| start_freq = cfg80211_get_start_freq(center_freq, bandwidth); |
| end_freq = cfg80211_get_end_freq(center_freq, bandwidth); |
| |
| for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) { |
| c = ieee80211_get_channel_khz(wiphy, freq); |
| if (!c) |
| return -EINVAL; |
| |
| if (c->flags & IEEE80211_CHAN_RADAR) |
| return 1; |
| } |
| return 0; |
| } |
| |
| |
| int cfg80211_chandef_dfs_required(struct wiphy *wiphy, |
| const struct cfg80211_chan_def *chandef, |
| enum nl80211_iftype iftype) |
| { |
| int width; |
| int ret; |
| |
| if (WARN_ON(!cfg80211_chandef_valid(chandef))) |
| return -EINVAL; |
| |
| switch (iftype) { |
| case NL80211_IFTYPE_ADHOC: |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_P2P_GO: |
| case NL80211_IFTYPE_MESH_POINT: |
| width = cfg80211_chandef_get_width(chandef); |
| if (width < 0) |
| return -EINVAL; |
| |
| ret = cfg80211_get_chans_dfs_required(wiphy, |
| ieee80211_chandef_to_khz(chandef), |
| width); |
| if (ret < 0) |
| return ret; |
| else if (ret > 0) |
| return BIT(chandef->width); |
| |
| if (!chandef->center_freq2) |
| return 0; |
| |
| ret = cfg80211_get_chans_dfs_required(wiphy, |
| MHZ_TO_KHZ(chandef->center_freq2), |
| width); |
| if (ret < 0) |
| return ret; |
| else if (ret > 0) |
| return BIT(chandef->width); |
| |
| break; |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_OCB: |
| case NL80211_IFTYPE_P2P_CLIENT: |
| case NL80211_IFTYPE_MONITOR: |
| case NL80211_IFTYPE_AP_VLAN: |
| case NL80211_IFTYPE_P2P_DEVICE: |
| case NL80211_IFTYPE_NAN: |
| break; |
| case NL80211_IFTYPE_WDS: |
| case NL80211_IFTYPE_UNSPECIFIED: |
| case NUM_NL80211_IFTYPES: |
| WARN_ON(1); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(cfg80211_chandef_dfs_required); |
| |
| static int cfg80211_get_chans_dfs_usable(struct wiphy *wiphy, |
| u32 center_freq, |
| u32 bandwidth) |
| { |
| struct ieee80211_channel *c; |
| u32 freq, start_freq, end_freq; |
| int count = 0; |
| |
| start_freq = cfg80211_get_start_freq(center_freq, bandwidth); |
| end_freq = cfg80211_get_end_freq(center_freq, bandwidth); |
| |
| /* |
| * Check entire range of channels for the bandwidth. |
| * Check all channels are DFS channels (DFS_USABLE or |
| * DFS_AVAILABLE). Return number of usable channels |
| * (require CAC). Allow DFS and non-DFS channel mix. |
| */ |
| for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) { |
| c = ieee80211_get_channel_khz(wiphy, freq); |
| if (!c) |
| return -EINVAL; |
| |
| if (c->flags & IEEE80211_CHAN_DISABLED) |
| return -EINVAL; |
| |
| if (c->flags & IEEE80211_CHAN_RADAR) { |
| if (c->dfs_state == NL80211_DFS_UNAVAILABLE) |
| return -EINVAL; |
| |
| if (c->dfs_state == NL80211_DFS_USABLE) |
| count++; |
| } |
| } |
| |
| return count; |
| } |
| |
| bool cfg80211_chandef_dfs_usable(struct wiphy *wiphy, |
| const struct cfg80211_chan_def *chandef) |
| { |
| int width; |
| int r1, r2 = 0; |
| |
| if (WARN_ON(!cfg80211_chandef_valid(chandef))) |
| return false; |
| |
| width = cfg80211_chandef_get_width(chandef); |
| if (width < 0) |
| return false; |
| |
| r1 = cfg80211_get_chans_dfs_usable(wiphy, |
| MHZ_TO_KHZ(chandef->center_freq1), |
| width); |
| |
| if (r1 < 0) |
| return false; |
| |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_80P80: |
| WARN_ON(!chandef->center_freq2); |
| r2 = cfg80211_get_chans_dfs_usable(wiphy, |
| MHZ_TO_KHZ(chandef->center_freq2), |
| width); |
| if (r2 < 0) |
| return false; |
| break; |
| default: |
| WARN_ON(chandef->center_freq2); |
| break; |
| } |
| |
| return (r1 + r2 > 0); |
| } |
| |
| /* |
| * Checks if center frequency of chan falls with in the bandwidth |
| * range of chandef. |
| */ |
| bool cfg80211_is_sub_chan(struct cfg80211_chan_def *chandef, |
| struct ieee80211_channel *chan) |
| { |
| int width; |
| u32 freq; |
| |
| if (chandef->chan->center_freq == chan->center_freq) |
| return true; |
| |
| width = cfg80211_chandef_get_width(chandef); |
| if (width <= 20) |
| return false; |
| |
| for (freq = chandef->center_freq1 - width / 2 + 10; |
| freq <= chandef->center_freq1 + width / 2 - 10; freq += 20) { |
| if (chan->center_freq == freq) |
| return true; |
| } |
| |
| if (!chandef->center_freq2) |
| return false; |
| |
| for (freq = chandef->center_freq2 - width / 2 + 10; |
| freq <= chandef->center_freq2 + width / 2 - 10; freq += 20) { |
| if (chan->center_freq == freq) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| bool cfg80211_beaconing_iface_active(struct wireless_dev *wdev) |
| { |
| bool active = false; |
| |
| ASSERT_WDEV_LOCK(wdev); |
| |
| if (!wdev->chandef.chan) |
| return false; |
| |
| switch (wdev->iftype) { |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_P2P_GO: |
| active = wdev->beacon_interval != 0; |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| active = wdev->ssid_len != 0; |
| break; |
| case NL80211_IFTYPE_MESH_POINT: |
| active = wdev->mesh_id_len != 0; |
| break; |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_OCB: |
| case NL80211_IFTYPE_P2P_CLIENT: |
| case NL80211_IFTYPE_MONITOR: |
| case NL80211_IFTYPE_AP_VLAN: |
| case NL80211_IFTYPE_P2P_DEVICE: |
| /* Can NAN type be considered as beaconing interface? */ |
| case NL80211_IFTYPE_NAN: |
| break; |
| case NL80211_IFTYPE_UNSPECIFIED: |
| case NL80211_IFTYPE_WDS: |
| case NUM_NL80211_IFTYPES: |
| WARN_ON(1); |
| } |
| |
| return active; |
| } |
| |
| static bool cfg80211_is_wiphy_oper_chan(struct wiphy *wiphy, |
| struct ieee80211_channel *chan) |
| { |
| struct wireless_dev *wdev; |
| |
| list_for_each_entry(wdev, &wiphy->wdev_list, list) { |
| wdev_lock(wdev); |
| if (!cfg80211_beaconing_iface_active(wdev)) { |
| wdev_unlock(wdev); |
| continue; |
| } |
| |
| if (cfg80211_is_sub_chan(&wdev->chandef, chan)) { |
| wdev_unlock(wdev); |
| return true; |
| } |
| wdev_unlock(wdev); |
| } |
| |
| return false; |
| } |
| |
| bool cfg80211_any_wiphy_oper_chan(struct wiphy *wiphy, |
| struct ieee80211_channel *chan) |
| { |
| struct cfg80211_registered_device *rdev; |
| |
| ASSERT_RTNL(); |
| |
| if (!(chan->flags & IEEE80211_CHAN_RADAR)) |
| return false; |
| |
| list_for_each_entry(rdev, &cfg80211_rdev_list, list) { |
| if (!reg_dfs_domain_same(wiphy, &rdev->wiphy)) |
| continue; |
| |
| if (cfg80211_is_wiphy_oper_chan(&rdev->wiphy, chan)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static bool cfg80211_get_chans_dfs_available(struct wiphy *wiphy, |
| u32 center_freq, |
| u32 bandwidth) |
| { |
| struct ieee80211_channel *c; |
| u32 freq, start_freq, end_freq; |
| bool dfs_offload; |
| |
| dfs_offload = wiphy_ext_feature_isset(wiphy, |
| NL80211_EXT_FEATURE_DFS_OFFLOAD); |
| |
| start_freq = cfg80211_get_start_freq(center_freq, bandwidth); |
| end_freq = cfg80211_get_end_freq(center_freq, bandwidth); |
| |
| /* |
| * Check entire range of channels for the bandwidth. |
| * If any channel in between is disabled or has not |
| * had gone through CAC return false |
| */ |
| for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) { |
| c = ieee80211_get_channel_khz(wiphy, freq); |
| if (!c) |
| return false; |
| |
| if (c->flags & IEEE80211_CHAN_DISABLED) |
| return false; |
| |
| if ((c->flags & IEEE80211_CHAN_RADAR) && |
| (c->dfs_state != NL80211_DFS_AVAILABLE) && |
| !(c->dfs_state == NL80211_DFS_USABLE && dfs_offload)) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool cfg80211_chandef_dfs_available(struct wiphy *wiphy, |
| const struct cfg80211_chan_def *chandef) |
| { |
| int width; |
| int r; |
| |
| if (WARN_ON(!cfg80211_chandef_valid(chandef))) |
| return false; |
| |
| width = cfg80211_chandef_get_width(chandef); |
| if (width < 0) |
| return false; |
| |
| r = cfg80211_get_chans_dfs_available(wiphy, |
| MHZ_TO_KHZ(chandef->center_freq1), |
| width); |
| |
| /* If any of channels unavailable for cf1 just return */ |
| if (!r) |
| return r; |
| |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_80P80: |
| WARN_ON(!chandef->center_freq2); |
| r = cfg80211_get_chans_dfs_available(wiphy, |
| MHZ_TO_KHZ(chandef->center_freq2), |
| width); |
| break; |
| default: |
| WARN_ON(chandef->center_freq2); |
| break; |
| } |
| |
| return r; |
| } |
| |
| static unsigned int cfg80211_get_chans_dfs_cac_time(struct wiphy *wiphy, |
| u32 center_freq, |
| u32 bandwidth) |
| { |
| struct ieee80211_channel *c; |
| u32 start_freq, end_freq, freq; |
| unsigned int dfs_cac_ms = 0; |
| |
| start_freq = cfg80211_get_start_freq(center_freq, bandwidth); |
| end_freq = cfg80211_get_end_freq(center_freq, bandwidth); |
| |
| for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) { |
| c = ieee80211_get_channel_khz(wiphy, freq); |
| if (!c) |
| return 0; |
| |
| if (c->flags & IEEE80211_CHAN_DISABLED) |
| return 0; |
| |
| if (!(c->flags & IEEE80211_CHAN_RADAR)) |
| continue; |
| |
| if (c->dfs_cac_ms > dfs_cac_ms) |
| dfs_cac_ms = c->dfs_cac_ms; |
| } |
| |
| return dfs_cac_ms; |
| } |
| |
| unsigned int |
| cfg80211_chandef_dfs_cac_time(struct wiphy *wiphy, |
| const struct cfg80211_chan_def *chandef) |
| { |
| int width; |
| unsigned int t1 = 0, t2 = 0; |
| |
| if (WARN_ON(!cfg80211_chandef_valid(chandef))) |
| return 0; |
| |
| width = cfg80211_chandef_get_width(chandef); |
| if (width < 0) |
| return 0; |
| |
| t1 = cfg80211_get_chans_dfs_cac_time(wiphy, |
| MHZ_TO_KHZ(chandef->center_freq1), |
| width); |
| |
| if (!chandef->center_freq2) |
| return t1; |
| |
| t2 = cfg80211_get_chans_dfs_cac_time(wiphy, |
| MHZ_TO_KHZ(chandef->center_freq2), |
| width); |
| |
| return max(t1, t2); |
| } |
| |
| static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy, |
| u32 center_freq, u32 bandwidth, |
| u32 prohibited_flags) |
| { |
| struct ieee80211_channel *c; |
| u32 freq, start_freq, end_freq; |
| |
| start_freq = cfg80211_get_start_freq(center_freq, bandwidth); |
| end_freq = cfg80211_get_end_freq(center_freq, bandwidth); |
| |
| for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) { |
| c = ieee80211_get_channel_khz(wiphy, freq); |
| if (!c || c->flags & prohibited_flags) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* check if the operating channels are valid and supported */ |
| static bool cfg80211_edmg_usable(struct wiphy *wiphy, u8 edmg_channels, |
| enum ieee80211_edmg_bw_config edmg_bw_config, |
| int primary_channel, |
| struct ieee80211_edmg *edmg_cap) |
| { |
| struct ieee80211_channel *chan; |
| int i, freq; |
| int channels_counter = 0; |
| |
| if (!edmg_channels && !edmg_bw_config) |
| return true; |
| |
| if ((!edmg_channels && edmg_bw_config) || |
| (edmg_channels && !edmg_bw_config)) |
| return false; |
| |
| if (!(edmg_channels & BIT(primary_channel - 1))) |
| return false; |
| |
| /* 60GHz channels 1..6 */ |
| for (i = 0; i < 6; i++) { |
| if (!(edmg_channels & BIT(i))) |
| continue; |
| |
| if (!(edmg_cap->channels & BIT(i))) |
| return false; |
| |
| channels_counter++; |
| |
| freq = ieee80211_channel_to_frequency(i + 1, |
| NL80211_BAND_60GHZ); |
| chan = ieee80211_get_channel(wiphy, freq); |
| if (!chan || chan->flags & IEEE80211_CHAN_DISABLED) |
| return false; |
| } |
| |
| /* IEEE802.11 allows max 4 channels */ |
| if (channels_counter > 4) |
| return false; |
| |
| /* check bw_config is a subset of what driver supports |
| * (see IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13) |
| */ |
| if ((edmg_bw_config % 4) > (edmg_cap->bw_config % 4)) |
| return false; |
| |
| if (edmg_bw_config > edmg_cap->bw_config) |
| return false; |
| |
| return true; |
| } |
| |
| bool cfg80211_chandef_usable(struct wiphy *wiphy, |
| const struct cfg80211_chan_def *chandef, |
| u32 prohibited_flags) |
| { |
| struct ieee80211_sta_ht_cap *ht_cap; |
| struct ieee80211_sta_vht_cap *vht_cap; |
| struct ieee80211_edmg *edmg_cap; |
| u32 width, control_freq, cap; |
| bool ext_nss_cap, support_80_80 = false; |
| |
| if (WARN_ON(!cfg80211_chandef_valid(chandef))) |
| return false; |
| |
| ht_cap = &wiphy->bands[chandef->chan->band]->ht_cap; |
| vht_cap = &wiphy->bands[chandef->chan->band]->vht_cap; |
| edmg_cap = &wiphy->bands[chandef->chan->band]->edmg_cap; |
| ext_nss_cap = __le16_to_cpu(vht_cap->vht_mcs.tx_highest) & |
| IEEE80211_VHT_EXT_NSS_BW_CAPABLE; |
| |
| if (edmg_cap->channels && |
| !cfg80211_edmg_usable(wiphy, |
| chandef->edmg.channels, |
| chandef->edmg.bw_config, |
| chandef->chan->hw_value, |
| edmg_cap)) |
| return false; |
| |
| control_freq = chandef->chan->center_freq; |
| |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_1: |
| width = 1; |
| break; |
| case NL80211_CHAN_WIDTH_2: |
| width = 2; |
| break; |
| case NL80211_CHAN_WIDTH_4: |
| width = 4; |
| break; |
| case NL80211_CHAN_WIDTH_8: |
| width = 8; |
| break; |
| case NL80211_CHAN_WIDTH_16: |
| width = 16; |
| break; |
| case NL80211_CHAN_WIDTH_5: |
| width = 5; |
| break; |
| case NL80211_CHAN_WIDTH_10: |
| prohibited_flags |= IEEE80211_CHAN_NO_10MHZ; |
| width = 10; |
| break; |
| case NL80211_CHAN_WIDTH_20: |
| if (!ht_cap->ht_supported && |
| chandef->chan->band != NL80211_BAND_6GHZ) |
| return false; |
| fallthrough; |
| case NL80211_CHAN_WIDTH_20_NOHT: |
| prohibited_flags |= IEEE80211_CHAN_NO_20MHZ; |
| width = 20; |
| break; |
| case NL80211_CHAN_WIDTH_40: |
| width = 40; |
| if (chandef->chan->band == NL80211_BAND_6GHZ) |
| break; |
| if (!ht_cap->ht_supported) |
| return false; |
| if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) || |
| ht_cap->cap & IEEE80211_HT_CAP_40MHZ_INTOLERANT) |
| return false; |
| if (chandef->center_freq1 < control_freq && |
| chandef->chan->flags & IEEE80211_CHAN_NO_HT40MINUS) |
| return false; |
| if (chandef->center_freq1 > control_freq && |
| chandef->chan->flags & IEEE80211_CHAN_NO_HT40PLUS) |
| return false; |
| break; |
| case NL80211_CHAN_WIDTH_80P80: |
| cap = vht_cap->cap; |
| support_80_80 = |
| (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) || |
| (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ && |
| cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) || |
| (ext_nss_cap && |
| u32_get_bits(cap, IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) > 1); |
| if (chandef->chan->band != NL80211_BAND_6GHZ && !support_80_80) |
| return false; |
| fallthrough; |
| case NL80211_CHAN_WIDTH_80: |
| prohibited_flags |= IEEE80211_CHAN_NO_80MHZ; |
| width = 80; |
| if (chandef->chan->band == NL80211_BAND_6GHZ) |
| break; |
| if (!vht_cap->vht_supported) |
| return false; |
| break; |
| case NL80211_CHAN_WIDTH_160: |
| prohibited_flags |= IEEE80211_CHAN_NO_160MHZ; |
| width = 160; |
| if (chandef->chan->band == NL80211_BAND_6GHZ) |
| break; |
| if (!vht_cap->vht_supported) |
| return false; |
| cap = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; |
| if (cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ && |
| cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ && |
| !(ext_nss_cap && |
| (vht_cap->cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK))) |
| return false; |
| break; |
| default: |
| WARN_ON_ONCE(1); |
| return false; |
| } |
| |
| /* |
| * TODO: What if there are only certain 80/160/80+80 MHz channels |
| * allowed by the driver, or only certain combinations? |
| * For 40 MHz the driver can set the NO_HT40 flags, but for |
| * 80/160 MHz and in particular 80+80 MHz this isn't really |
| * feasible and we only have NO_80MHZ/NO_160MHZ so far but |
| * no way to cover 80+80 MHz or more complex restrictions. |
| * Note that such restrictions also need to be advertised to |
| * userspace, for example for P2P channel selection. |
| */ |
| |
| if (width > 20) |
| prohibited_flags |= IEEE80211_CHAN_NO_OFDM; |
| |
| /* 5 and 10 MHz are only defined for the OFDM PHY */ |
| if (width < 20) |
| prohibited_flags |= IEEE80211_CHAN_NO_OFDM; |
| |
| |
| if (!cfg80211_secondary_chans_ok(wiphy, |
| ieee80211_chandef_to_khz(chandef), |
| width, prohibited_flags)) |
| return false; |
| |
| if (!chandef->center_freq2) |
| return true; |
| return cfg80211_secondary_chans_ok(wiphy, |
| MHZ_TO_KHZ(chandef->center_freq2), |
| width, prohibited_flags); |
| } |
| EXPORT_SYMBOL(cfg80211_chandef_usable); |
| |
| /* |
| * Check if the channel can be used under permissive conditions mandated by |
| * some regulatory bodies, i.e., the channel is marked with |
| * IEEE80211_CHAN_IR_CONCURRENT and there is an additional station interface |
| * associated to an AP on the same channel or on the same UNII band |
| * (assuming that the AP is an authorized master). |
| * In addition allow operation on a channel on which indoor operation is |
| * allowed, iff we are currently operating in an indoor environment. |
| */ |
| static bool cfg80211_ir_permissive_chan(struct wiphy *wiphy, |
| enum nl80211_iftype iftype, |
| struct ieee80211_channel *chan) |
| { |
| struct wireless_dev *wdev; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); |
| |
| lockdep_assert_held(&rdev->wiphy.mtx); |
| |
| if (!IS_ENABLED(CONFIG_CFG80211_REG_RELAX_NO_IR) || |
| !(wiphy->regulatory_flags & REGULATORY_ENABLE_RELAX_NO_IR)) |
| return false; |
| |
| /* only valid for GO and TDLS off-channel (station/p2p-CL) */ |
| if (iftype != NL80211_IFTYPE_P2P_GO && |
| iftype != NL80211_IFTYPE_STATION && |
| iftype != NL80211_IFTYPE_P2P_CLIENT) |
| return false; |
| |
| if (regulatory_indoor_allowed() && |
| (chan->flags & IEEE80211_CHAN_INDOOR_ONLY)) |
| return true; |
| |
| if (!(chan->flags & IEEE80211_CHAN_IR_CONCURRENT)) |
| return false; |
| |
| /* |
| * Generally, it is possible to rely on another device/driver to allow |
| * the IR concurrent relaxation, however, since the device can further |
| * enforce the relaxation (by doing a similar verifications as this), |
| * and thus fail the GO instantiation, consider only the interfaces of |
| * the current registered device. |
| */ |
| list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { |
| struct ieee80211_channel *other_chan = NULL; |
| int r1, r2; |
| |
| wdev_lock(wdev); |
| if (wdev->iftype == NL80211_IFTYPE_STATION && |
| wdev->current_bss) |
| other_chan = wdev->current_bss->pub.channel; |
| |
| /* |
| * If a GO already operates on the same GO_CONCURRENT channel, |
| * this one (maybe the same one) can beacon as well. We allow |
| * the operation even if the station we relied on with |
| * GO_CONCURRENT is disconnected now. But then we must make sure |
| * we're not outdoor on an indoor-only channel. |
| */ |
| if (iftype == NL80211_IFTYPE_P2P_GO && |
| wdev->iftype == NL80211_IFTYPE_P2P_GO && |
| wdev->beacon_interval && |
| !(chan->flags & IEEE80211_CHAN_INDOOR_ONLY)) |
| other_chan = wdev->chandef.chan; |
| wdev_unlock(wdev); |
| |
| if (!other_chan) |
| continue; |
| |
| if (chan == other_chan) |
| return true; |
| |
| if (chan->band != NL80211_BAND_5GHZ && |
| chan->band != NL80211_BAND_6GHZ) |
| continue; |
| |
| r1 = cfg80211_get_unii(chan->center_freq); |
| r2 = cfg80211_get_unii(other_chan->center_freq); |
| |
| if (r1 != -EINVAL && r1 == r2) { |
| /* |
| * At some locations channels 149-165 are considered a |
| * bundle, but at other locations, e.g., Indonesia, |
| * channels 149-161 are considered a bundle while |
| * channel 165 is left out and considered to be in a |
| * different bundle. Thus, in case that there is a |
| * station interface connected to an AP on channel 165, |
| * it is assumed that channels 149-161 are allowed for |
| * GO operations. However, having a station interface |
| * connected to an AP on channels 149-161, does not |
| * allow GO operation on channel 165. |
| */ |
| if (chan->center_freq == 5825 && |
| other_chan->center_freq != 5825) |
| continue; |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static bool _cfg80211_reg_can_beacon(struct wiphy *wiphy, |
| struct cfg80211_chan_def *chandef, |
| enum nl80211_iftype iftype, |
| bool check_no_ir) |
| { |
| bool res; |
| u32 prohibited_flags = IEEE80211_CHAN_DISABLED | |
| IEEE80211_CHAN_RADAR; |
| |
| trace_cfg80211_reg_can_beacon(wiphy, chandef, iftype, check_no_ir); |
| |
| if (check_no_ir) |
| prohibited_flags |= IEEE80211_CHAN_NO_IR; |
| |
| if (cfg80211_chandef_dfs_required(wiphy, chandef, iftype) > 0 && |
| cfg80211_chandef_dfs_available(wiphy, chandef)) { |
| /* We can skip IEEE80211_CHAN_NO_IR if chandef dfs available */ |
| prohibited_flags = IEEE80211_CHAN_DISABLED; |
| } |
| |
| res = cfg80211_chandef_usable(wiphy, chandef, prohibited_flags); |
| |
| trace_cfg80211_return_bool(res); |
| return res; |
| } |
| |
| bool cfg80211_reg_can_beacon(struct wiphy *wiphy, |
| struct cfg80211_chan_def *chandef, |
| enum nl80211_iftype iftype) |
| { |
| return _cfg80211_reg_can_beacon(wiphy, chandef, iftype, true); |
| } |
| EXPORT_SYMBOL(cfg80211_reg_can_beacon); |
| |
| bool cfg80211_reg_can_beacon_relax(struct wiphy *wiphy, |
| struct cfg80211_chan_def *chandef, |
| enum nl80211_iftype iftype) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); |
| bool check_no_ir; |
| |
| lockdep_assert_held(&rdev->wiphy.mtx); |
| |
| /* |
| * Under certain conditions suggested by some regulatory bodies a |
| * GO/STA can IR on channels marked with IEEE80211_NO_IR. Set this flag |
| * only if such relaxations are not enabled and the conditions are not |
| * met. |
| */ |
| check_no_ir = !cfg80211_ir_permissive_chan(wiphy, iftype, |
| chandef->chan); |
| |
| return _cfg80211_reg_can_beacon(wiphy, chandef, iftype, check_no_ir); |
| } |
| EXPORT_SYMBOL(cfg80211_reg_can_beacon_relax); |
| |
| int cfg80211_set_monitor_channel(struct cfg80211_registered_device *rdev, |
| struct cfg80211_chan_def *chandef) |
| { |
| if (!rdev->ops->set_monitor_channel) |
| return -EOPNOTSUPP; |
| if (!cfg80211_has_monitors_only(rdev)) |
| return -EBUSY; |
| |
| return rdev_set_monitor_channel(rdev, chandef); |
| } |
| |
| void |
| cfg80211_get_chan_state(struct wireless_dev *wdev, |
| struct ieee80211_channel **chan, |
| enum cfg80211_chan_mode *chanmode, |
| u8 *radar_detect) |
| { |
| int ret; |
| |
| *chan = NULL; |
| *chanmode = CHAN_MODE_UNDEFINED; |
| |
| ASSERT_WDEV_LOCK(wdev); |
| |
| if (wdev->netdev && !netif_running(wdev->netdev)) |
| return; |
| |
| switch (wdev->iftype) { |
| case NL80211_IFTYPE_ADHOC: |
| if (wdev->current_bss) { |
| *chan = wdev->current_bss->pub.channel; |
| *chanmode = (wdev->ibss_fixed && |
| !wdev->ibss_dfs_possible) |
| ? CHAN_MODE_SHARED |
| : CHAN_MODE_EXCLUSIVE; |
| |
| /* consider worst-case - IBSS can try to return to the |
| * original user-specified channel as creator */ |
| if (wdev->ibss_dfs_possible) |
| *radar_detect |= BIT(wdev->chandef.width); |
| return; |
| } |
| break; |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_P2P_CLIENT: |
| if (wdev->current_bss) { |
| *chan = wdev->current_bss->pub.channel; |
| *chanmode = CHAN_MODE_SHARED; |
| return; |
| } |
| break; |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_P2P_GO: |
| if (wdev->cac_started) { |
| *chan = wdev->chandef.chan; |
| *chanmode = CHAN_MODE_SHARED; |
| *radar_detect |= BIT(wdev->chandef.width); |
| } else if (wdev->beacon_interval) { |
| *chan = wdev->chandef.chan; |
| *chanmode = CHAN_MODE_SHARED; |
| |
| ret = cfg80211_chandef_dfs_required(wdev->wiphy, |
| &wdev->chandef, |
| wdev->iftype); |
| WARN_ON(ret < 0); |
| if (ret > 0) |
| *radar_detect |= BIT(wdev->chandef.width); |
| } |
| return; |
| case NL80211_IFTYPE_MESH_POINT: |
| if (wdev->mesh_id_len) { |
| *chan = wdev->chandef.chan; |
| *chanmode = CHAN_MODE_SHARED; |
| |
| ret = cfg80211_chandef_dfs_required(wdev->wiphy, |
| &wdev->chandef, |
| wdev->iftype); |
| WARN_ON(ret < 0); |
| if (ret > 0) |
| *radar_detect |= BIT(wdev->chandef.width); |
| } |
| return; |
| case NL80211_IFTYPE_OCB: |
| if (wdev->chandef.chan) { |
| *chan = wdev->chandef.chan; |
| *chanmode = CHAN_MODE_SHARED; |
| return; |
| } |
| break; |
| case NL80211_IFTYPE_MONITOR: |
| case NL80211_IFTYPE_AP_VLAN: |
| case NL80211_IFTYPE_P2P_DEVICE: |
| case NL80211_IFTYPE_NAN: |
| /* these interface types don't really have a channel */ |
| return; |
| case NL80211_IFTYPE_UNSPECIFIED: |
| case NL80211_IFTYPE_WDS: |
| case NUM_NL80211_IFTYPES: |
| WARN_ON(1); |
| } |
| } |
| |
| bool cfg80211_any_usable_channels(struct wiphy *wiphy, |
| unsigned long sband_mask, |
| u32 prohibited_flags) |
| { |
| int idx; |
| |
| prohibited_flags |= IEEE80211_CHAN_DISABLED; |
| |
| for_each_set_bit(idx, &sband_mask, NUM_NL80211_BANDS) { |
| struct ieee80211_supported_band *sband = wiphy->bands[idx]; |
| int chanidx; |
| |
| if (!sband) |
| continue; |
| |
| for (chanidx = 0; chanidx < sband->n_channels; chanidx++) { |
| struct ieee80211_channel *chan; |
| |
| chan = &sband->channels[chanidx]; |
| |
| if (chan->flags & prohibited_flags) |
| continue; |
| |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| EXPORT_SYMBOL(cfg80211_any_usable_channels); |