| // SPDX-License-Identifier: GPL-2.0+ |
| // Copyright 2017 IBM Corp. |
| #include <linux/pci.h> |
| #include <asm/pnv-ocxl.h> |
| #include <misc/ocxl-config.h> |
| #include "ocxl_internal.h" |
| |
| #define EXTRACT_BIT(val, bit) (!!(val & BIT(bit))) |
| #define EXTRACT_BITS(val, s, e) ((val & GENMASK(e, s)) >> s) |
| |
| #define OCXL_DVSEC_AFU_IDX_MASK GENMASK(5, 0) |
| #define OCXL_DVSEC_ACTAG_MASK GENMASK(11, 0) |
| #define OCXL_DVSEC_PASID_MASK GENMASK(19, 0) |
| #define OCXL_DVSEC_PASID_LOG_MASK GENMASK(4, 0) |
| |
| #define OCXL_DVSEC_TEMPL_VERSION 0x0 |
| #define OCXL_DVSEC_TEMPL_NAME 0x4 |
| #define OCXL_DVSEC_TEMPL_AFU_VERSION 0x1C |
| #define OCXL_DVSEC_TEMPL_MMIO_GLOBAL 0x20 |
| #define OCXL_DVSEC_TEMPL_MMIO_GLOBAL_SZ 0x28 |
| #define OCXL_DVSEC_TEMPL_MMIO_PP 0x30 |
| #define OCXL_DVSEC_TEMPL_MMIO_PP_SZ 0x38 |
| #define OCXL_DVSEC_TEMPL_ALL_MEM_SZ 0x3C |
| #define OCXL_DVSEC_TEMPL_LPC_MEM_START 0x40 |
| #define OCXL_DVSEC_TEMPL_WWID 0x48 |
| #define OCXL_DVSEC_TEMPL_LPC_MEM_SZ 0x58 |
| |
| #define OCXL_MAX_AFU_PER_FUNCTION 64 |
| #define OCXL_TEMPL_LEN_1_0 0x58 |
| #define OCXL_TEMPL_LEN_1_1 0x60 |
| #define OCXL_TEMPL_NAME_LEN 24 |
| #define OCXL_CFG_TIMEOUT 3 |
| |
| static int find_dvsec(struct pci_dev *dev, int dvsec_id) |
| { |
| return pci_find_dvsec_capability(dev, PCI_VENDOR_ID_IBM, dvsec_id); |
| } |
| |
| static int find_dvsec_afu_ctrl(struct pci_dev *dev, u8 afu_idx) |
| { |
| int vsec = 0; |
| u16 vendor, id; |
| u8 idx; |
| |
| while ((vsec = pci_find_next_ext_capability(dev, vsec, |
| OCXL_EXT_CAP_ID_DVSEC))) { |
| pci_read_config_word(dev, vsec + OCXL_DVSEC_VENDOR_OFFSET, |
| &vendor); |
| pci_read_config_word(dev, vsec + OCXL_DVSEC_ID_OFFSET, &id); |
| |
| if (vendor == PCI_VENDOR_ID_IBM && |
| id == OCXL_DVSEC_AFU_CTRL_ID) { |
| pci_read_config_byte(dev, |
| vsec + OCXL_DVSEC_AFU_CTRL_AFU_IDX, |
| &idx); |
| if (idx == afu_idx) |
| return vsec; |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * get_function_0() - Find a related PCI device (function 0) |
| * @dev: PCI device to match |
| * |
| * Returns a pointer to the related device, or null if not found |
| */ |
| static struct pci_dev *get_function_0(struct pci_dev *dev) |
| { |
| unsigned int devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0); |
| |
| return pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus), |
| dev->bus->number, devfn); |
| } |
| |
| static void read_pasid(struct pci_dev *dev, struct ocxl_fn_config *fn) |
| { |
| u16 val; |
| int pos; |
| |
| pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PASID); |
| if (!pos) { |
| /* |
| * PASID capability is not mandatory, but there |
| * shouldn't be any AFU |
| */ |
| dev_dbg(&dev->dev, "Function doesn't require any PASID\n"); |
| fn->max_pasid_log = -1; |
| goto out; |
| } |
| pci_read_config_word(dev, pos + PCI_PASID_CAP, &val); |
| fn->max_pasid_log = EXTRACT_BITS(val, 8, 12); |
| |
| out: |
| dev_dbg(&dev->dev, "PASID capability:\n"); |
| dev_dbg(&dev->dev, " Max PASID log = %d\n", fn->max_pasid_log); |
| } |
| |
| static int read_dvsec_tl(struct pci_dev *dev, struct ocxl_fn_config *fn) |
| { |
| int pos; |
| |
| pos = find_dvsec(dev, OCXL_DVSEC_TL_ID); |
| if (!pos && PCI_FUNC(dev->devfn) == 0) { |
| dev_err(&dev->dev, "Can't find TL DVSEC\n"); |
| return -ENODEV; |
| } |
| if (pos && PCI_FUNC(dev->devfn) != 0) { |
| dev_err(&dev->dev, "TL DVSEC is only allowed on function 0\n"); |
| return -ENODEV; |
| } |
| fn->dvsec_tl_pos = pos; |
| return 0; |
| } |
| |
| static int read_dvsec_function(struct pci_dev *dev, struct ocxl_fn_config *fn) |
| { |
| int pos, afu_present; |
| u32 val; |
| |
| pos = find_dvsec(dev, OCXL_DVSEC_FUNC_ID); |
| if (!pos) { |
| dev_err(&dev->dev, "Can't find function DVSEC\n"); |
| return -ENODEV; |
| } |
| fn->dvsec_function_pos = pos; |
| |
| pci_read_config_dword(dev, pos + OCXL_DVSEC_FUNC_OFF_INDEX, &val); |
| afu_present = EXTRACT_BIT(val, 31); |
| if (!afu_present) { |
| fn->max_afu_index = -1; |
| dev_dbg(&dev->dev, "Function doesn't define any AFU\n"); |
| goto out; |
| } |
| fn->max_afu_index = EXTRACT_BITS(val, 24, 29); |
| |
| out: |
| dev_dbg(&dev->dev, "Function DVSEC:\n"); |
| dev_dbg(&dev->dev, " Max AFU index = %d\n", fn->max_afu_index); |
| return 0; |
| } |
| |
| static int read_dvsec_afu_info(struct pci_dev *dev, struct ocxl_fn_config *fn) |
| { |
| int pos; |
| |
| if (fn->max_afu_index < 0) { |
| fn->dvsec_afu_info_pos = -1; |
| return 0; |
| } |
| |
| pos = find_dvsec(dev, OCXL_DVSEC_AFU_INFO_ID); |
| if (!pos) { |
| dev_err(&dev->dev, "Can't find AFU information DVSEC\n"); |
| return -ENODEV; |
| } |
| fn->dvsec_afu_info_pos = pos; |
| return 0; |
| } |
| |
| static int read_dvsec_vendor(struct pci_dev *dev) |
| { |
| int pos; |
| u32 cfg, tlx, dlx, reset_reload; |
| |
| /* |
| * vendor specific DVSEC, for IBM images only. Some older |
| * images may not have it |
| * |
| * It's only used on function 0 to specify the version of some |
| * logic blocks and to give access to special registers to |
| * enable host-based flashing. |
| */ |
| if (PCI_FUNC(dev->devfn) != 0) |
| return 0; |
| |
| pos = find_dvsec(dev, OCXL_DVSEC_VENDOR_ID); |
| if (!pos) |
| return 0; |
| |
| pci_read_config_dword(dev, pos + OCXL_DVSEC_VENDOR_CFG_VERS, &cfg); |
| pci_read_config_dword(dev, pos + OCXL_DVSEC_VENDOR_TLX_VERS, &tlx); |
| pci_read_config_dword(dev, pos + OCXL_DVSEC_VENDOR_DLX_VERS, &dlx); |
| pci_read_config_dword(dev, pos + OCXL_DVSEC_VENDOR_RESET_RELOAD, |
| &reset_reload); |
| |
| dev_dbg(&dev->dev, "Vendor specific DVSEC:\n"); |
| dev_dbg(&dev->dev, " CFG version = 0x%x\n", cfg); |
| dev_dbg(&dev->dev, " TLX version = 0x%x\n", tlx); |
| dev_dbg(&dev->dev, " DLX version = 0x%x\n", dlx); |
| dev_dbg(&dev->dev, " ResetReload = 0x%x\n", reset_reload); |
| return 0; |
| } |
| |
| static int get_dvsec_vendor0(struct pci_dev *dev, struct pci_dev **dev0, |
| int *out_pos) |
| { |
| int pos; |
| |
| if (PCI_FUNC(dev->devfn) != 0) { |
| dev = get_function_0(dev); |
| if (!dev) |
| return -1; |
| } |
| pos = find_dvsec(dev, OCXL_DVSEC_VENDOR_ID); |
| if (!pos) |
| return -1; |
| *dev0 = dev; |
| *out_pos = pos; |
| return 0; |
| } |
| |
| int ocxl_config_get_reset_reload(struct pci_dev *dev, int *val) |
| { |
| struct pci_dev *dev0; |
| u32 reset_reload; |
| int pos; |
| |
| if (get_dvsec_vendor0(dev, &dev0, &pos)) |
| return -1; |
| |
| pci_read_config_dword(dev0, pos + OCXL_DVSEC_VENDOR_RESET_RELOAD, |
| &reset_reload); |
| *val = !!(reset_reload & BIT(0)); |
| return 0; |
| } |
| |
| int ocxl_config_set_reset_reload(struct pci_dev *dev, int val) |
| { |
| struct pci_dev *dev0; |
| u32 reset_reload; |
| int pos; |
| |
| if (get_dvsec_vendor0(dev, &dev0, &pos)) |
| return -1; |
| |
| pci_read_config_dword(dev0, pos + OCXL_DVSEC_VENDOR_RESET_RELOAD, |
| &reset_reload); |
| if (val) |
| reset_reload |= BIT(0); |
| else |
| reset_reload &= ~BIT(0); |
| pci_write_config_dword(dev0, pos + OCXL_DVSEC_VENDOR_RESET_RELOAD, |
| reset_reload); |
| return 0; |
| } |
| |
| static int validate_function(struct pci_dev *dev, struct ocxl_fn_config *fn) |
| { |
| if (fn->max_pasid_log == -1 && fn->max_afu_index >= 0) { |
| dev_err(&dev->dev, |
| "AFUs are defined but no PASIDs are requested\n"); |
| return -EINVAL; |
| } |
| |
| if (fn->max_afu_index > OCXL_MAX_AFU_PER_FUNCTION) { |
| dev_err(&dev->dev, |
| "Max AFU index out of architectural limit (%d vs %d)\n", |
| fn->max_afu_index, OCXL_MAX_AFU_PER_FUNCTION); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| int ocxl_config_read_function(struct pci_dev *dev, struct ocxl_fn_config *fn) |
| { |
| int rc; |
| |
| read_pasid(dev, fn); |
| |
| rc = read_dvsec_tl(dev, fn); |
| if (rc) { |
| dev_err(&dev->dev, |
| "Invalid Transaction Layer DVSEC configuration: %d\n", |
| rc); |
| return -ENODEV; |
| } |
| |
| rc = read_dvsec_function(dev, fn); |
| if (rc) { |
| dev_err(&dev->dev, |
| "Invalid Function DVSEC configuration: %d\n", rc); |
| return -ENODEV; |
| } |
| |
| rc = read_dvsec_afu_info(dev, fn); |
| if (rc) { |
| dev_err(&dev->dev, "Invalid AFU configuration: %d\n", rc); |
| return -ENODEV; |
| } |
| |
| rc = read_dvsec_vendor(dev); |
| if (rc) { |
| dev_err(&dev->dev, |
| "Invalid vendor specific DVSEC configuration: %d\n", |
| rc); |
| return -ENODEV; |
| } |
| |
| rc = validate_function(dev, fn); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(ocxl_config_read_function); |
| |
| static int read_afu_info(struct pci_dev *dev, struct ocxl_fn_config *fn, |
| int offset, u32 *data) |
| { |
| u32 val; |
| unsigned long timeout = jiffies + (HZ * OCXL_CFG_TIMEOUT); |
| int pos = fn->dvsec_afu_info_pos; |
| |
| /* Protect 'data valid' bit */ |
| if (EXTRACT_BIT(offset, 31)) { |
| dev_err(&dev->dev, "Invalid offset in AFU info DVSEC\n"); |
| return -EINVAL; |
| } |
| |
| pci_write_config_dword(dev, pos + OCXL_DVSEC_AFU_INFO_OFF, offset); |
| pci_read_config_dword(dev, pos + OCXL_DVSEC_AFU_INFO_OFF, &val); |
| while (!EXTRACT_BIT(val, 31)) { |
| if (time_after_eq(jiffies, timeout)) { |
| dev_err(&dev->dev, |
| "Timeout while reading AFU info DVSEC (offset=%d)\n", |
| offset); |
| return -EBUSY; |
| } |
| cpu_relax(); |
| pci_read_config_dword(dev, pos + OCXL_DVSEC_AFU_INFO_OFF, &val); |
| } |
| pci_read_config_dword(dev, pos + OCXL_DVSEC_AFU_INFO_DATA, data); |
| return 0; |
| } |
| |
| /** |
| * read_template_version() - Read the template version from the AFU |
| * @dev: the device for the AFU |
| * @fn: the AFU offsets |
| * @len: outputs the template length |
| * @version: outputs the major<<8,minor version |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int read_template_version(struct pci_dev *dev, struct ocxl_fn_config *fn, |
| u16 *len, u16 *version) |
| { |
| u32 val32; |
| u8 major, minor; |
| int rc; |
| |
| rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_VERSION, &val32); |
| if (rc) |
| return rc; |
| |
| *len = EXTRACT_BITS(val32, 16, 31); |
| major = EXTRACT_BITS(val32, 8, 15); |
| minor = EXTRACT_BITS(val32, 0, 7); |
| *version = (major << 8) + minor; |
| return 0; |
| } |
| |
| int ocxl_config_check_afu_index(struct pci_dev *dev, |
| struct ocxl_fn_config *fn, int afu_idx) |
| { |
| int rc; |
| u16 templ_version; |
| u16 len, expected_len; |
| |
| pci_write_config_byte(dev, |
| fn->dvsec_afu_info_pos + OCXL_DVSEC_AFU_INFO_AFU_IDX, |
| afu_idx); |
| |
| rc = read_template_version(dev, fn, &len, &templ_version); |
| if (rc) |
| return rc; |
| |
| /* AFU index map can have holes, in which case we read all 0's */ |
| if (!templ_version && !len) |
| return 0; |
| |
| dev_dbg(&dev->dev, "AFU descriptor template version %d.%d\n", |
| templ_version >> 8, templ_version & 0xFF); |
| |
| switch (templ_version) { |
| case 0x0005: // v0.5 was used prior to the spec approval |
| case 0x0100: |
| expected_len = OCXL_TEMPL_LEN_1_0; |
| break; |
| case 0x0101: |
| expected_len = OCXL_TEMPL_LEN_1_1; |
| break; |
| default: |
| dev_warn(&dev->dev, "Unknown AFU template version %#x\n", |
| templ_version); |
| expected_len = len; |
| } |
| if (len != expected_len) |
| dev_warn(&dev->dev, |
| "Unexpected template length %#x in AFU information, expected %#x for version %#x\n", |
| len, expected_len, templ_version); |
| return 1; |
| } |
| |
| static int read_afu_name(struct pci_dev *dev, struct ocxl_fn_config *fn, |
| struct ocxl_afu_config *afu) |
| { |
| int i, rc; |
| u32 val, *ptr; |
| |
| BUILD_BUG_ON(OCXL_AFU_NAME_SZ < OCXL_TEMPL_NAME_LEN); |
| for (i = 0; i < OCXL_TEMPL_NAME_LEN; i += 4) { |
| rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_NAME + i, &val); |
| if (rc) |
| return rc; |
| ptr = (u32 *) &afu->name[i]; |
| *ptr = le32_to_cpu((__force __le32) val); |
| } |
| afu->name[OCXL_AFU_NAME_SZ - 1] = '\0'; /* play safe */ |
| return 0; |
| } |
| |
| static int read_afu_mmio(struct pci_dev *dev, struct ocxl_fn_config *fn, |
| struct ocxl_afu_config *afu) |
| { |
| int rc; |
| u32 val; |
| |
| /* |
| * Global MMIO |
| */ |
| rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_MMIO_GLOBAL, &val); |
| if (rc) |
| return rc; |
| afu->global_mmio_bar = EXTRACT_BITS(val, 0, 2); |
| afu->global_mmio_offset = EXTRACT_BITS(val, 16, 31) << 16; |
| |
| rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_MMIO_GLOBAL + 4, &val); |
| if (rc) |
| return rc; |
| afu->global_mmio_offset += (u64) val << 32; |
| |
| rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_MMIO_GLOBAL_SZ, &val); |
| if (rc) |
| return rc; |
| afu->global_mmio_size = val; |
| |
| /* |
| * Per-process MMIO |
| */ |
| rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_MMIO_PP, &val); |
| if (rc) |
| return rc; |
| afu->pp_mmio_bar = EXTRACT_BITS(val, 0, 2); |
| afu->pp_mmio_offset = EXTRACT_BITS(val, 16, 31) << 16; |
| |
| rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_MMIO_PP + 4, &val); |
| if (rc) |
| return rc; |
| afu->pp_mmio_offset += (u64) val << 32; |
| |
| rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_MMIO_PP_SZ, &val); |
| if (rc) |
| return rc; |
| afu->pp_mmio_stride = val; |
| |
| return 0; |
| } |
| |
| static int read_afu_control(struct pci_dev *dev, struct ocxl_afu_config *afu) |
| { |
| int pos; |
| u8 val8; |
| u16 val16; |
| |
| pos = find_dvsec_afu_ctrl(dev, afu->idx); |
| if (!pos) { |
| dev_err(&dev->dev, "Can't find AFU control DVSEC for AFU %d\n", |
| afu->idx); |
| return -ENODEV; |
| } |
| afu->dvsec_afu_control_pos = pos; |
| |
| pci_read_config_byte(dev, pos + OCXL_DVSEC_AFU_CTRL_PASID_SUP, &val8); |
| afu->pasid_supported_log = EXTRACT_BITS(val8, 0, 4); |
| |
| pci_read_config_word(dev, pos + OCXL_DVSEC_AFU_CTRL_ACTAG_SUP, &val16); |
| afu->actag_supported = EXTRACT_BITS(val16, 0, 11); |
| return 0; |
| } |
| |
| static bool char_allowed(int c) |
| { |
| /* |
| * Permitted Characters : Alphanumeric, hyphen, underscore, comma |
| */ |
| if ((c >= 0x30 && c <= 0x39) /* digits */ || |
| (c >= 0x41 && c <= 0x5A) /* upper case */ || |
| (c >= 0x61 && c <= 0x7A) /* lower case */ || |
| c == 0 /* NULL */ || |
| c == 0x2D /* - */ || |
| c == 0x5F /* _ */ || |
| c == 0x2C /* , */) |
| return true; |
| return false; |
| } |
| |
| static int validate_afu(struct pci_dev *dev, struct ocxl_afu_config *afu) |
| { |
| int i; |
| |
| if (!afu->name[0]) { |
| dev_err(&dev->dev, "Empty AFU name\n"); |
| return -EINVAL; |
| } |
| for (i = 0; i < OCXL_TEMPL_NAME_LEN; i++) { |
| if (!char_allowed(afu->name[i])) { |
| dev_err(&dev->dev, |
| "Invalid character in AFU name\n"); |
| return -EINVAL; |
| } |
| } |
| |
| if (afu->global_mmio_bar != 0 && |
| afu->global_mmio_bar != 2 && |
| afu->global_mmio_bar != 4) { |
| dev_err(&dev->dev, "Invalid global MMIO bar number\n"); |
| return -EINVAL; |
| } |
| if (afu->pp_mmio_bar != 0 && |
| afu->pp_mmio_bar != 2 && |
| afu->pp_mmio_bar != 4) { |
| dev_err(&dev->dev, "Invalid per-process MMIO bar number\n"); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /** |
| * read_afu_lpc_memory_info() - Populate AFU metadata regarding LPC memory |
| * @dev: the device for the AFU |
| * @fn: the AFU offsets |
| * @afu: the AFU struct to populate the LPC metadata into |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int read_afu_lpc_memory_info(struct pci_dev *dev, |
| struct ocxl_fn_config *fn, |
| struct ocxl_afu_config *afu) |
| { |
| int rc; |
| u32 val32; |
| u16 templ_version; |
| u16 templ_len; |
| u64 total_mem_size = 0; |
| u64 lpc_mem_size = 0; |
| |
| afu->lpc_mem_offset = 0; |
| afu->lpc_mem_size = 0; |
| afu->special_purpose_mem_offset = 0; |
| afu->special_purpose_mem_size = 0; |
| /* |
| * For AFUs following template v1.0, the LPC memory covers the |
| * total memory. Its size is a power of 2. |
| * |
| * For AFUs with template >= v1.01, the total memory size is |
| * still a power of 2, but it is split in 2 parts: |
| * - the LPC memory, whose size can now be anything |
| * - the remainder memory is a special purpose memory, whose |
| * definition is AFU-dependent. It is not accessible through |
| * the usual commands for LPC memory |
| */ |
| rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_ALL_MEM_SZ, &val32); |
| if (rc) |
| return rc; |
| |
| val32 = EXTRACT_BITS(val32, 0, 7); |
| if (!val32) |
| return 0; /* No LPC memory */ |
| |
| /* |
| * The configuration space spec allows for a memory size of up |
| * to 2^255 bytes. |
| * |
| * Current generation hardware uses 56-bit physical addresses, |
| * but we won't be able to get near close to that, as we won't |
| * have a hole big enough in the memory map. Let it pass in |
| * the driver for now. We'll get an error from the firmware |
| * when trying to configure something too big. |
| */ |
| total_mem_size = 1ull << val32; |
| |
| rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_LPC_MEM_START, &val32); |
| if (rc) |
| return rc; |
| |
| afu->lpc_mem_offset = val32; |
| |
| rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_LPC_MEM_START + 4, &val32); |
| if (rc) |
| return rc; |
| |
| afu->lpc_mem_offset |= (u64) val32 << 32; |
| |
| rc = read_template_version(dev, fn, &templ_len, &templ_version); |
| if (rc) |
| return rc; |
| |
| if (templ_version >= 0x0101) { |
| rc = read_afu_info(dev, fn, |
| OCXL_DVSEC_TEMPL_LPC_MEM_SZ, &val32); |
| if (rc) |
| return rc; |
| lpc_mem_size = val32; |
| |
| rc = read_afu_info(dev, fn, |
| OCXL_DVSEC_TEMPL_LPC_MEM_SZ + 4, &val32); |
| if (rc) |
| return rc; |
| lpc_mem_size |= (u64) val32 << 32; |
| } else { |
| lpc_mem_size = total_mem_size; |
| } |
| afu->lpc_mem_size = lpc_mem_size; |
| |
| if (lpc_mem_size < total_mem_size) { |
| afu->special_purpose_mem_offset = |
| afu->lpc_mem_offset + lpc_mem_size; |
| afu->special_purpose_mem_size = |
| total_mem_size - lpc_mem_size; |
| } |
| return 0; |
| } |
| |
| int ocxl_config_read_afu(struct pci_dev *dev, struct ocxl_fn_config *fn, |
| struct ocxl_afu_config *afu, u8 afu_idx) |
| { |
| int rc; |
| u32 val32; |
| |
| /* |
| * First, we need to write the AFU idx for the AFU we want to |
| * access. |
| */ |
| WARN_ON((afu_idx & OCXL_DVSEC_AFU_IDX_MASK) != afu_idx); |
| afu->idx = afu_idx; |
| pci_write_config_byte(dev, |
| fn->dvsec_afu_info_pos + OCXL_DVSEC_AFU_INFO_AFU_IDX, |
| afu->idx); |
| |
| rc = read_afu_name(dev, fn, afu); |
| if (rc) |
| return rc; |
| |
| rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_AFU_VERSION, &val32); |
| if (rc) |
| return rc; |
| afu->version_major = EXTRACT_BITS(val32, 24, 31); |
| afu->version_minor = EXTRACT_BITS(val32, 16, 23); |
| afu->afuc_type = EXTRACT_BITS(val32, 14, 15); |
| afu->afum_type = EXTRACT_BITS(val32, 12, 13); |
| afu->profile = EXTRACT_BITS(val32, 0, 7); |
| |
| rc = read_afu_mmio(dev, fn, afu); |
| if (rc) |
| return rc; |
| |
| rc = read_afu_lpc_memory_info(dev, fn, afu); |
| if (rc) |
| return rc; |
| |
| rc = read_afu_control(dev, afu); |
| if (rc) |
| return rc; |
| |
| dev_dbg(&dev->dev, "AFU configuration:\n"); |
| dev_dbg(&dev->dev, " name = %s\n", afu->name); |
| dev_dbg(&dev->dev, " version = %d.%d\n", afu->version_major, |
| afu->version_minor); |
| dev_dbg(&dev->dev, " global mmio bar = %hhu\n", afu->global_mmio_bar); |
| dev_dbg(&dev->dev, " global mmio offset = %#llx\n", |
| afu->global_mmio_offset); |
| dev_dbg(&dev->dev, " global mmio size = %#x\n", afu->global_mmio_size); |
| dev_dbg(&dev->dev, " pp mmio bar = %hhu\n", afu->pp_mmio_bar); |
| dev_dbg(&dev->dev, " pp mmio offset = %#llx\n", afu->pp_mmio_offset); |
| dev_dbg(&dev->dev, " pp mmio stride = %#x\n", afu->pp_mmio_stride); |
| dev_dbg(&dev->dev, " lpc_mem offset = %#llx\n", afu->lpc_mem_offset); |
| dev_dbg(&dev->dev, " lpc_mem size = %#llx\n", afu->lpc_mem_size); |
| dev_dbg(&dev->dev, " special purpose mem offset = %#llx\n", |
| afu->special_purpose_mem_offset); |
| dev_dbg(&dev->dev, " special purpose mem size = %#llx\n", |
| afu->special_purpose_mem_size); |
| dev_dbg(&dev->dev, " pasid supported (log) = %u\n", |
| afu->pasid_supported_log); |
| dev_dbg(&dev->dev, " actag supported = %u\n", |
| afu->actag_supported); |
| |
| rc = validate_afu(dev, afu); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(ocxl_config_read_afu); |
| |
| int ocxl_config_get_actag_info(struct pci_dev *dev, u16 *base, u16 *enabled, |
| u16 *supported) |
| { |
| int rc; |
| |
| /* |
| * This is really a simple wrapper for the kernel API, to |
| * avoid an external driver using ocxl as a library to call |
| * platform-dependent code |
| */ |
| rc = pnv_ocxl_get_actag(dev, base, enabled, supported); |
| if (rc) { |
| dev_err(&dev->dev, "Can't get actag for device: %d\n", rc); |
| return rc; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ocxl_config_get_actag_info); |
| |
| void ocxl_config_set_afu_actag(struct pci_dev *dev, int pos, int actag_base, |
| int actag_count) |
| { |
| u16 val; |
| |
| val = actag_count & OCXL_DVSEC_ACTAG_MASK; |
| pci_write_config_byte(dev, pos + OCXL_DVSEC_AFU_CTRL_ACTAG_EN, val); |
| |
| val = actag_base & OCXL_DVSEC_ACTAG_MASK; |
| pci_write_config_dword(dev, pos + OCXL_DVSEC_AFU_CTRL_ACTAG_BASE, val); |
| } |
| EXPORT_SYMBOL_GPL(ocxl_config_set_afu_actag); |
| |
| int ocxl_config_get_pasid_info(struct pci_dev *dev, int *count) |
| { |
| return pnv_ocxl_get_pasid_count(dev, count); |
| } |
| |
| void ocxl_config_set_afu_pasid(struct pci_dev *dev, int pos, int pasid_base, |
| u32 pasid_count_log) |
| { |
| u8 val8; |
| u32 val32; |
| |
| val8 = pasid_count_log & OCXL_DVSEC_PASID_LOG_MASK; |
| pci_write_config_byte(dev, pos + OCXL_DVSEC_AFU_CTRL_PASID_EN, val8); |
| |
| pci_read_config_dword(dev, pos + OCXL_DVSEC_AFU_CTRL_PASID_BASE, |
| &val32); |
| val32 &= ~OCXL_DVSEC_PASID_MASK; |
| val32 |= pasid_base & OCXL_DVSEC_PASID_MASK; |
| pci_write_config_dword(dev, pos + OCXL_DVSEC_AFU_CTRL_PASID_BASE, |
| val32); |
| } |
| EXPORT_SYMBOL_GPL(ocxl_config_set_afu_pasid); |
| |
| void ocxl_config_set_afu_state(struct pci_dev *dev, int pos, int enable) |
| { |
| u8 val; |
| |
| pci_read_config_byte(dev, pos + OCXL_DVSEC_AFU_CTRL_ENABLE, &val); |
| if (enable) |
| val |= 1; |
| else |
| val &= 0xFE; |
| pci_write_config_byte(dev, pos + OCXL_DVSEC_AFU_CTRL_ENABLE, val); |
| } |
| EXPORT_SYMBOL_GPL(ocxl_config_set_afu_state); |
| |
| int ocxl_config_set_TL(struct pci_dev *dev, int tl_dvsec) |
| { |
| u32 val; |
| __be32 *be32ptr; |
| u8 timers; |
| int i, rc; |
| long recv_cap; |
| char *recv_rate; |
| |
| /* |
| * Skip on function != 0, as the TL can only be defined on 0 |
| */ |
| if (PCI_FUNC(dev->devfn) != 0) |
| return 0; |
| |
| recv_rate = kzalloc(PNV_OCXL_TL_RATE_BUF_SIZE, GFP_KERNEL); |
| if (!recv_rate) |
| return -ENOMEM; |
| /* |
| * The spec defines 64 templates for messages in the |
| * Transaction Layer (TL). |
| * |
| * The host and device each support a subset, so we need to |
| * configure the transmitters on each side to send only |
| * templates the receiver understands, at a rate the receiver |
| * can process. Per the spec, template 0 must be supported by |
| * everybody. That's the template which has been used by the |
| * host and device so far. |
| * |
| * The sending rate limit must be set before the template is |
| * enabled. |
| */ |
| |
| /* |
| * Device -> host |
| */ |
| rc = pnv_ocxl_get_tl_cap(dev, &recv_cap, recv_rate, |
| PNV_OCXL_TL_RATE_BUF_SIZE); |
| if (rc) |
| goto out; |
| |
| for (i = 0; i < PNV_OCXL_TL_RATE_BUF_SIZE; i += 4) { |
| be32ptr = (__be32 *) &recv_rate[i]; |
| pci_write_config_dword(dev, |
| tl_dvsec + OCXL_DVSEC_TL_SEND_RATE + i, |
| be32_to_cpu(*be32ptr)); |
| } |
| val = recv_cap >> 32; |
| pci_write_config_dword(dev, tl_dvsec + OCXL_DVSEC_TL_SEND_CAP, val); |
| val = recv_cap & GENMASK(31, 0); |
| pci_write_config_dword(dev, tl_dvsec + OCXL_DVSEC_TL_SEND_CAP + 4, val); |
| |
| /* |
| * Host -> device |
| */ |
| for (i = 0; i < PNV_OCXL_TL_RATE_BUF_SIZE; i += 4) { |
| pci_read_config_dword(dev, |
| tl_dvsec + OCXL_DVSEC_TL_RECV_RATE + i, |
| &val); |
| be32ptr = (__be32 *) &recv_rate[i]; |
| *be32ptr = cpu_to_be32(val); |
| } |
| pci_read_config_dword(dev, tl_dvsec + OCXL_DVSEC_TL_RECV_CAP, &val); |
| recv_cap = (long) val << 32; |
| pci_read_config_dword(dev, tl_dvsec + OCXL_DVSEC_TL_RECV_CAP + 4, &val); |
| recv_cap |= val; |
| |
| rc = pnv_ocxl_set_tl_conf(dev, recv_cap, __pa(recv_rate), |
| PNV_OCXL_TL_RATE_BUF_SIZE); |
| if (rc) |
| goto out; |
| |
| /* |
| * Opencapi commands needing to be retried are classified per |
| * the TL in 2 groups: short and long commands. |
| * |
| * The short back off timer it not used for now. It will be |
| * for opencapi 4.0. |
| * |
| * The long back off timer is typically used when an AFU hits |
| * a page fault but the NPU is already processing one. So the |
| * AFU needs to wait before it can resubmit. Having a value |
| * too low doesn't break anything, but can generate extra |
| * traffic on the link. |
| * We set it to 1.6 us for now. It's shorter than, but in the |
| * same order of magnitude as the time spent to process a page |
| * fault. |
| */ |
| timers = 0x2 << 4; /* long timer = 1.6 us */ |
| pci_write_config_byte(dev, tl_dvsec + OCXL_DVSEC_TL_BACKOFF_TIMERS, |
| timers); |
| |
| rc = 0; |
| out: |
| kfree(recv_rate); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(ocxl_config_set_TL); |
| |
| int ocxl_config_terminate_pasid(struct pci_dev *dev, int afu_control, int pasid) |
| { |
| u32 val; |
| unsigned long timeout; |
| |
| pci_read_config_dword(dev, afu_control + OCXL_DVSEC_AFU_CTRL_TERM_PASID, |
| &val); |
| if (EXTRACT_BIT(val, 20)) { |
| dev_err(&dev->dev, |
| "Can't terminate PASID %#x, previous termination didn't complete\n", |
| pasid); |
| return -EBUSY; |
| } |
| |
| val &= ~OCXL_DVSEC_PASID_MASK; |
| val |= pasid & OCXL_DVSEC_PASID_MASK; |
| val |= BIT(20); |
| pci_write_config_dword(dev, |
| afu_control + OCXL_DVSEC_AFU_CTRL_TERM_PASID, |
| val); |
| |
| timeout = jiffies + (HZ * OCXL_CFG_TIMEOUT); |
| pci_read_config_dword(dev, afu_control + OCXL_DVSEC_AFU_CTRL_TERM_PASID, |
| &val); |
| while (EXTRACT_BIT(val, 20)) { |
| if (time_after_eq(jiffies, timeout)) { |
| dev_err(&dev->dev, |
| "Timeout while waiting for AFU to terminate PASID %#x\n", |
| pasid); |
| return -EBUSY; |
| } |
| cpu_relax(); |
| pci_read_config_dword(dev, |
| afu_control + OCXL_DVSEC_AFU_CTRL_TERM_PASID, |
| &val); |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ocxl_config_terminate_pasid); |
| |
| void ocxl_config_set_actag(struct pci_dev *dev, int func_dvsec, u32 tag_first, |
| u32 tag_count) |
| { |
| u32 val; |
| |
| val = (tag_first & OCXL_DVSEC_ACTAG_MASK) << 16; |
| val |= tag_count & OCXL_DVSEC_ACTAG_MASK; |
| pci_write_config_dword(dev, func_dvsec + OCXL_DVSEC_FUNC_OFF_ACTAG, |
| val); |
| } |
| EXPORT_SYMBOL_GPL(ocxl_config_set_actag); |