Documentation/fb/sstfb.rst - linux - Git at Google

 =====
 sstfb
 =====

 Introduction
 ============

 This is a frame buffer device driver for 3dfx' Voodoo Graphics
 (aka voodoo 1, aka sst1) and Voodoo² (aka Voodoo 2, aka CVG) based
 video boards. It's highly experimental code, but is guaranteed to work
 on my computer, with my "Maxi Gamer 3D" and "Maxi Gamer 3d²" boards,
 and with me "between chair and keyboard". Some people tested other
 combinations and it seems that it works.
 The main page is located at <http://sstfb.sourceforge.net>, and if
 you want the latest version, check out the CVS, as the driver is a work
 in progress, I feel uncomfortable with releasing tarballs of something
 not completely working...Don't worry, it's still more than usable
 (I eat my own dog food)

 Please read the Bug section, and report any success or failure to me
 (Ghozlane Toumi <gtoumi@laposte.net>).
 BTW, If you have only one monitor , and you don't feel like playing
 with the vga passthrou cable, I can only suggest borrowing a screen
 somewhere...


 Installation
 ============

 This driver (should) work on ix86, with "late" 2.2.x kernel (tested
 with x = 19) and "recent" 2.4.x kernel, as a module or compiled in.
 It has been included in mainstream kernel since the infamous 2.4.10.
 You can apply the patches found in `sstfb/kernel/*-2.{2|4}.x.patch`,
 and copy sstfb.c to linux/drivers/video/, or apply a single patch,
 `sstfb/patch-2.{2|4}.x-sstfb-yymmdd` to your linux source tree.

 Then configure your kernel as usual: choose "m" or "y" to 3Dfx Voodoo
 Graphics in section "console". Compile, install, have fun... and please
 drop me a report :)


 Module Usage
 ============

 .. warning::

        #. You should read completely this section before issuing any command.

        #. If you have only one monitor to play with, once you insmod the
 	  module, the 3dfx takes control of the output, so you'll have to
 	  plug the monitor to the "normal" video board in order to issue
 	  the commands, or you can blindly use sst_dbg_vgapass
 	  in the tools directory (See Tools). The latest solution is pass the
 	  parameter vgapass=1 when insmodding the driver. (See Kernel/Modules
 	  Options)

 Module insertion
 ----------------

        #. insmod sstfb.o

 	  you should see some strange output from the board:
 	  a big blue square, a green and a red small squares and a vertical
 	  white rectangle. why? the function's name is self-explanatory:
 	  "sstfb_test()"...
 	  (if you don't have a second monitor, you'll have to plug your monitor
 	  directly to the 2D videocard to see what you're typing)

        #. con2fb /dev/fbx /dev/ttyx

 	  bind a tty to the new frame buffer. if you already have a frame
 	  buffer driver, the voodoo fb will likely be /dev/fb1. if not,
 	  the device will be /dev/fb0. You can check this by doing a
 	  cat /proc/fb. You can find a copy of con2fb in tools/ directory.
 	  if you don't have another fb device, this step is superfluous,
 	  as the console subsystem automagically binds ttys to the fb.
        #. switch to the virtual console you just mapped. "tadaaa" ...

 Module removal
 --------------

        #. con2fb /dev/fbx /dev/ttyx

 	  bind the tty to the old frame buffer so the module can be removed.
 	  (how does it work with vgacon ? short answer : it doesn't work)

        #. rmmod sstfb


 Kernel/Modules Options
 ----------------------

 You can pass some options to the sstfb module, and via the kernel
 command line when the driver is compiled in:
 for module : insmod sstfb.o option1=value1 option2=value2 ...
 in kernel :  video=sstfb:option1,option2:value2,option3 ...

 sstfb supports the following options:

 =============== =============== ===============================================
 Module		Kernel		Description
 =============== =============== ===============================================
 vgapass=0	vganopass	Enable or disable VGA passthrou cable.
 vgapass=1	vgapass		When enabled, the monitor will get the signal
 				from the VGA board and not from the voodoo.

 				Default: nopass

 mem=x		mem:x		Force frame buffer memory in MiB
 				allowed values: 0, 1, 2, 4.

 				Default: 0 (= autodetect)

 inverse=1	inverse		Supposed to enable inverse console.
 				doesn't work yet...

 clipping=1	clipping	Enable or disable clipping.
 clipping=0	noclipping	With clipping enabled, all offscreen
 				reads and writes are discarded.

 				Default: enable clipping.

 gfxclk=x	gfxclk:x	Force graphic clock frequency (in MHz).
 				Be careful with this option, it may be
 				DANGEROUS.

 				Default: auto

 					- 50Mhz for Voodoo 1,
 					- 75MHz for Voodoo 2.

 slowpci=1	fastpci		Enable or disable fast PCI read/writes.
 slowpci=1	slowpci		Default : fastpci

 dev=x		dev:x		Attach the driver to device number x.
 				0 is the first compatible board (in
 				lspci order)
 =============== =============== ===============================================

 Tools
 =====

 These tools are mostly for debugging purposes, but you can
 find some of these interesting:

 - `con2fb`, maps a tty to a fbramebuffer::

 	con2fb /dev/fb1 /dev/tty5

 - `sst_dbg_vgapass`, changes vga passthrou. You have to recompile the
   driver with SST_DEBUG and SST_DEBUG_IOCTL set to 1::

 	sst_dbg_vgapass /dev/fb1 1 (enables vga cable)
 	sst_dbg_vgapass /dev/fb1 0 (disables vga cable)

 - `glide_reset`, resets the voodoo using glide
   use this after rmmoding sstfb, if the module refuses to
   reinsert.

 Bugs
 ====

 - DO NOT use glide while the sstfb module is in, you'll most likely
   hang your computer.
 - If you see some artefacts (pixels not cleaning and stuff like that),
   try turning off clipping (clipping=0), and/or using slowpci
 - the driver don't detect the 4Mb frame buffer voodoos, it seems that
   the 2 last Mbs wrap around. looking into that .
 - The driver is 16 bpp only, 24/32 won't work.
 - The driver is not your_favorite_toy-safe. this includes SMP...

 	[Actually from inspection it seems to be safe - Alan]

 - When using XFree86 FBdev (X over fbdev) you may see strange color
   patterns at the border of your windows (the pixels lose the lowest
   byte -> basically the blue component and some of the green). I'm unable
   to reproduce this with XFree86-3.3, but one of the testers has this
   problem with XFree86-4. Apparently recent Xfree86-4.x solve this
   problem.
 - I didn't really test changing the palette, so you may find some weird
   things when playing with that.
 - Sometimes the driver will not recognise the DAC, and the
   initialisation will fail. This is specifically true for
   voodoo 2 boards, but it should be solved in recent versions. Please
   contact me.
 - The 24/32 is not likely to work anytime soon, knowing that the
   hardware does ... unusual things in 24/32 bpp.

 Todo
 ====

 - Get rid of the previous paragraph.
 - Buy more coffee.
 - test/port to other arch.
 - try to add panning using tweeks with front and back buffer .
 - try to implement accel on voodoo2, this board can actually do a
   lot in 2D even if it was sold as a 3D only board ...

 Ghozlane Toumi <gtoumi@laposte.net>


 Date: 2002/05/09 20:11:45

 http://sstfb.sourceforge.net/README
	=====
	sstfb
	=====

	Introduction
	============

	This is a frame buffer device driver for 3dfx' Voodoo Graphics
	(aka voodoo 1, aka sst1) and Voodoo² (aka Voodoo 2, aka CVG) based
	video boards. It's highly experimental code, but is guaranteed to work
	on my computer, with my "Maxi Gamer 3D" and "Maxi Gamer 3d²" boards,
	and with me "between chair and keyboard". Some people tested other
	combinations and it seems that it works.
	The main page is located at <http://sstfb.sourceforge.net>, and if
	you want the latest version, check out the CVS, as the driver is a work
	in progress, I feel uncomfortable with releasing tarballs of something
	not completely working...Don't worry, it's still more than usable
	(I eat my own dog food)

	Please read the Bug section, and report any success or failure to me
	(Ghozlane Toumi <gtoumi@laposte.net>).
	BTW, If you have only one monitor , and you don't feel like playing
	with the vga passthrou cable, I can only suggest borrowing a screen
	somewhere...


	Installation
	============

	This driver (should) work on ix86, with "late" 2.2.x kernel (tested
	with x = 19) and "recent" 2.4.x kernel, as a module or compiled in.
	It has been included in mainstream kernel since the infamous 2.4.10.
	You can apply the patches found in `sstfb/kernel/*-2.{2\|4}.x.patch`,
	and copy sstfb.c to linux/drivers/video/, or apply a single patch,
	`sstfb/patch-2.{2\|4}.x-sstfb-yymmdd` to your linux source tree.

	Then configure your kernel as usual: choose "m" or "y" to 3Dfx Voodoo
	Graphics in section "console". Compile, install, have fun... and please
	drop me a report :)


	Module Usage
	============

	.. warning::

	#. You should read completely this section before issuing any command.

	#. If you have only one monitor to play with, once you insmod the
	module, the 3dfx takes control of the output, so you'll have to
	plug the monitor to the "normal" video board in order to issue
	the commands, or you can blindly use sst_dbg_vgapass
	in the tools directory (See Tools). The latest solution is pass the
	parameter vgapass=1 when insmodding the driver. (See Kernel/Modules
	Options)

	Module insertion
	----------------

	#. insmod sstfb.o

	you should see some strange output from the board:
	a big blue square, a green and a red small squares and a vertical
	white rectangle. why? the function's name is self-explanatory:
	"sstfb_test()"...
	(if you don't have a second monitor, you'll have to plug your monitor
	directly to the 2D videocard to see what you're typing)

	#. con2fb /dev/fbx /dev/ttyx

	bind a tty to the new frame buffer. if you already have a frame
	buffer driver, the voodoo fb will likely be /dev/fb1. if not,
	the device will be /dev/fb0. You can check this by doing a
	cat /proc/fb. You can find a copy of con2fb in tools/ directory.
	if you don't have another fb device, this step is superfluous,
	as the console subsystem automagically binds ttys to the fb.
	#. switch to the virtual console you just mapped. "tadaaa" ...

	Module removal
	--------------

	#. con2fb /dev/fbx /dev/ttyx

	bind the tty to the old frame buffer so the module can be removed.
	(how does it work with vgacon ? short answer : it doesn't work)

	#. rmmod sstfb


	Kernel/Modules Options
	----------------------

	You can pass some options to the sstfb module, and via the kernel
	command line when the driver is compiled in:
	for module : insmod sstfb.o option1=value1 option2=value2 ...
	in kernel : video=sstfb:option1,option2:value2,option3 ...

	sstfb supports the following options:

	=============== =============== ===============================================
	Module Kernel Description
	=============== =============== ===============================================
	vgapass=0 vganopass Enable or disable VGA passthrou cable.
	vgapass=1 vgapass When enabled, the monitor will get the signal
	from the VGA board and not from the voodoo.

	Default: nopass

	mem=x mem:x Force frame buffer memory in MiB
	allowed values: 0, 1, 2, 4.

	Default: 0 (= autodetect)

	inverse=1 inverse Supposed to enable inverse console.
	doesn't work yet...

	clipping=1 clipping Enable or disable clipping.
	clipping=0 noclipping With clipping enabled, all offscreen
	reads and writes are discarded.

	Default: enable clipping.

	gfxclk=x gfxclk:x Force graphic clock frequency (in MHz).
	Be careful with this option, it may be
	DANGEROUS.

	Default: auto

	- 50Mhz for Voodoo 1,
	- 75MHz for Voodoo 2.

	slowpci=1 fastpci Enable or disable fast PCI read/writes.
	slowpci=1 slowpci Default : fastpci

	dev=x dev:x Attach the driver to device number x.
	0 is the first compatible board (in
	lspci order)
	=============== =============== ===============================================

	Tools
	=====

	These tools are mostly for debugging purposes, but you can
	find some of these interesting:

	- `con2fb`, maps a tty to a fbramebuffer::

	con2fb /dev/fb1 /dev/tty5

	- `sst_dbg_vgapass`, changes vga passthrou. You have to recompile the
	driver with SST_DEBUG and SST_DEBUG_IOCTL set to 1::

	sst_dbg_vgapass /dev/fb1 1 (enables vga cable)
	sst_dbg_vgapass /dev/fb1 0 (disables vga cable)

	- `glide_reset`, resets the voodoo using glide
	use this after rmmoding sstfb, if the module refuses to
	reinsert.

	Bugs
	====

	- DO NOT use glide while the sstfb module is in, you'll most likely
	hang your computer.
	- If you see some artefacts (pixels not cleaning and stuff like that),
	try turning off clipping (clipping=0), and/or using slowpci
	- the driver don't detect the 4Mb frame buffer voodoos, it seems that
	the 2 last Mbs wrap around. looking into that .
	- The driver is 16 bpp only, 24/32 won't work.
	- The driver is not your_favorite_toy-safe. this includes SMP...

	[Actually from inspection it seems to be safe - Alan]

	- When using XFree86 FBdev (X over fbdev) you may see strange color
	patterns at the border of your windows (the pixels lose the lowest
	byte -> basically the blue component and some of the green). I'm unable
	to reproduce this with XFree86-3.3, but one of the testers has this
	problem with XFree86-4. Apparently recent Xfree86-4.x solve this
	problem.
	- I didn't really test changing the palette, so you may find some weird
	things when playing with that.
	- Sometimes the driver will not recognise the DAC, and the
	initialisation will fail. This is specifically true for
	voodoo 2 boards, but it should be solved in recent versions. Please
	contact me.
	- The 24/32 is not likely to work anytime soon, knowing that the
	hardware does ... unusual things in 24/32 bpp.

	Todo
	====

	- Get rid of the previous paragraph.
	- Buy more coffee.
	- test/port to other arch.
	- try to add panning using tweeks with front and back buffer .
	- try to implement accel on voodoo2, this board can actually do a
	lot in 2D even if it was sold as a 3D only board ...

	Ghozlane Toumi <gtoumi@laposte.net>


	Date: 2002/05/09 20:11:45

	http://sstfb.sourceforge.net/README