blob: bf9e4ef35684b933c66fe474e6cbd7dc0f096a20 [file] [log] [blame]
/*
Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
* Neither the name of Trident Microsystems nor Hauppauge Computer Works
nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
DRXJ specific implementation of DRX driver
authors: Dragan Savic, Milos Nikolic, Mihajlo Katona, Tao Ding, Paul Janssen
The Linux DVB Driver for Micronas DRX39xx family (drx3933j) was
written by Devin Heitmueller <devin.heitmueller@kernellabs.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*-----------------------------------------------------------------------------
INCLUDE FILES
----------------------------------------------------------------------------*/
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
#include <linux/module.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <asm/div64.h>
#include <media/dvb_frontend.h>
#include "drx39xxj.h"
#include "drxj.h"
#include "drxj_map.h"
/*============================================================================*/
/*=== DEFINES ================================================================*/
/*============================================================================*/
#define DRX39XX_MAIN_FIRMWARE "dvb-fe-drxj-mc-1.0.8.fw"
/*
* \brief Maximum u32 value.
*/
#ifndef MAX_U32
#define MAX_U32 ((u32) (0xFFFFFFFFL))
#endif
/* Customer configurable hardware settings, etc */
#ifndef MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH
#define MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH 0x02
#endif
#ifndef MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH
#define MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH 0x02
#endif
#ifndef MPEG_OUTPUT_CLK_DRIVE_STRENGTH
#define MPEG_OUTPUT_CLK_DRIVE_STRENGTH 0x06
#endif
#ifndef OOB_CRX_DRIVE_STRENGTH
#define OOB_CRX_DRIVE_STRENGTH 0x02
#endif
#ifndef OOB_DRX_DRIVE_STRENGTH
#define OOB_DRX_DRIVE_STRENGTH 0x02
#endif
/*** START DJCOMBO patches to DRXJ registermap constants *********************/
/*** registermap 200706071303 from drxj **************************************/
#define ATV_TOP_CR_AMP_TH_FM 0x0
#define ATV_TOP_CR_AMP_TH_L 0xA
#define ATV_TOP_CR_AMP_TH_LP 0xA
#define ATV_TOP_CR_AMP_TH_BG 0x8
#define ATV_TOP_CR_AMP_TH_DK 0x8
#define ATV_TOP_CR_AMP_TH_I 0x8
#define ATV_TOP_CR_CONT_CR_D_MN 0x18
#define ATV_TOP_CR_CONT_CR_D_FM 0x0
#define ATV_TOP_CR_CONT_CR_D_L 0x20
#define ATV_TOP_CR_CONT_CR_D_LP 0x20
#define ATV_TOP_CR_CONT_CR_D_BG 0x18
#define ATV_TOP_CR_CONT_CR_D_DK 0x18
#define ATV_TOP_CR_CONT_CR_D_I 0x18
#define ATV_TOP_CR_CONT_CR_I_MN 0x80
#define ATV_TOP_CR_CONT_CR_I_FM 0x0
#define ATV_TOP_CR_CONT_CR_I_L 0x80
#define ATV_TOP_CR_CONT_CR_I_LP 0x80
#define ATV_TOP_CR_CONT_CR_I_BG 0x80
#define ATV_TOP_CR_CONT_CR_I_DK 0x80
#define ATV_TOP_CR_CONT_CR_I_I 0x80
#define ATV_TOP_CR_CONT_CR_P_MN 0x4
#define ATV_TOP_CR_CONT_CR_P_FM 0x0
#define ATV_TOP_CR_CONT_CR_P_L 0x4
#define ATV_TOP_CR_CONT_CR_P_LP 0x4
#define ATV_TOP_CR_CONT_CR_P_BG 0x4
#define ATV_TOP_CR_CONT_CR_P_DK 0x4
#define ATV_TOP_CR_CONT_CR_P_I 0x4
#define ATV_TOP_CR_OVM_TH_MN 0xA0
#define ATV_TOP_CR_OVM_TH_FM 0x0
#define ATV_TOP_CR_OVM_TH_L 0xA0
#define ATV_TOP_CR_OVM_TH_LP 0xA0
#define ATV_TOP_CR_OVM_TH_BG 0xA0
#define ATV_TOP_CR_OVM_TH_DK 0xA0
#define ATV_TOP_CR_OVM_TH_I 0xA0
#define ATV_TOP_EQU0_EQU_C0_FM 0x0
#define ATV_TOP_EQU0_EQU_C0_L 0x3
#define ATV_TOP_EQU0_EQU_C0_LP 0x3
#define ATV_TOP_EQU0_EQU_C0_BG 0x7
#define ATV_TOP_EQU0_EQU_C0_DK 0x0
#define ATV_TOP_EQU0_EQU_C0_I 0x3
#define ATV_TOP_EQU1_EQU_C1_FM 0x0
#define ATV_TOP_EQU1_EQU_C1_L 0x1F6
#define ATV_TOP_EQU1_EQU_C1_LP 0x1F6
#define ATV_TOP_EQU1_EQU_C1_BG 0x197
#define ATV_TOP_EQU1_EQU_C1_DK 0x198
#define ATV_TOP_EQU1_EQU_C1_I 0x1F6
#define ATV_TOP_EQU2_EQU_C2_FM 0x0
#define ATV_TOP_EQU2_EQU_C2_L 0x28
#define ATV_TOP_EQU2_EQU_C2_LP 0x28
#define ATV_TOP_EQU2_EQU_C2_BG 0xC5
#define ATV_TOP_EQU2_EQU_C2_DK 0xB0
#define ATV_TOP_EQU2_EQU_C2_I 0x28
#define ATV_TOP_EQU3_EQU_C3_FM 0x0
#define ATV_TOP_EQU3_EQU_C3_L 0x192
#define ATV_TOP_EQU3_EQU_C3_LP 0x192
#define ATV_TOP_EQU3_EQU_C3_BG 0x12E
#define ATV_TOP_EQU3_EQU_C3_DK 0x18E
#define ATV_TOP_EQU3_EQU_C3_I 0x192
#define ATV_TOP_STD_MODE_MN 0x0
#define ATV_TOP_STD_MODE_FM 0x1
#define ATV_TOP_STD_MODE_L 0x0
#define ATV_TOP_STD_MODE_LP 0x0
#define ATV_TOP_STD_MODE_BG 0x0
#define ATV_TOP_STD_MODE_DK 0x0
#define ATV_TOP_STD_MODE_I 0x0
#define ATV_TOP_STD_VID_POL_MN 0x0
#define ATV_TOP_STD_VID_POL_FM 0x0
#define ATV_TOP_STD_VID_POL_L 0x2
#define ATV_TOP_STD_VID_POL_LP 0x2
#define ATV_TOP_STD_VID_POL_BG 0x0
#define ATV_TOP_STD_VID_POL_DK 0x0
#define ATV_TOP_STD_VID_POL_I 0x0
#define ATV_TOP_VID_AMP_MN 0x380
#define ATV_TOP_VID_AMP_FM 0x0
#define ATV_TOP_VID_AMP_L 0xF50
#define ATV_TOP_VID_AMP_LP 0xF50
#define ATV_TOP_VID_AMP_BG 0x380
#define ATV_TOP_VID_AMP_DK 0x394
#define ATV_TOP_VID_AMP_I 0x3D8
#define IQM_CF_OUT_ENA_OFDM__M 0x4
#define IQM_FS_ADJ_SEL_B_QAM 0x1
#define IQM_FS_ADJ_SEL_B_OFF 0x0
#define IQM_FS_ADJ_SEL_B_VSB 0x2
#define IQM_RC_ADJ_SEL_B_OFF 0x0
#define IQM_RC_ADJ_SEL_B_QAM 0x1
#define IQM_RC_ADJ_SEL_B_VSB 0x2
/*** END DJCOMBO patches to DRXJ registermap *********************************/
#include "drx_driver_version.h"
/* #define DRX_DEBUG */
#ifdef DRX_DEBUG
#include <stdio.h>
#endif
/*-----------------------------------------------------------------------------
ENUMS
----------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------
DEFINES
----------------------------------------------------------------------------*/
#ifndef DRXJ_WAKE_UP_KEY
#define DRXJ_WAKE_UP_KEY (demod->my_i2c_dev_addr->i2c_addr)
#endif
/*
* \def DRXJ_DEF_I2C_ADDR
* \brief Default I2C address of a demodulator instance.
*/
#define DRXJ_DEF_I2C_ADDR (0x52)
/*
* \def DRXJ_DEF_DEMOD_DEV_ID
* \brief Default device identifier of a demodultor instance.
*/
#define DRXJ_DEF_DEMOD_DEV_ID (1)
/*
* \def DRXJ_SCAN_TIMEOUT
* \brief Timeout value for waiting on demod lock during channel scan (millisec).
*/
#define DRXJ_SCAN_TIMEOUT 1000
/*
* \def HI_I2C_DELAY
* \brief HI timing delay for I2C timing (in nano seconds)
*
* Used to compute HI_CFG_DIV
*/
#define HI_I2C_DELAY 42
/*
* \def HI_I2C_BRIDGE_DELAY
* \brief HI timing delay for I2C timing (in nano seconds)
*
* Used to compute HI_CFG_BDL
*/
#define HI_I2C_BRIDGE_DELAY 750
/*
* \brief Time Window for MER and SER Measurement in Units of Segment duration.
*/
#define VSB_TOP_MEASUREMENT_PERIOD 64
#define SYMBOLS_PER_SEGMENT 832
/*
* \brief bit rate and segment rate constants used for SER and BER.
*/
/* values taken from the QAM microcode */
#define DRXJ_QAM_SL_SIG_POWER_QAM_UNKNOWN 0
#define DRXJ_QAM_SL_SIG_POWER_QPSK 32768
#define DRXJ_QAM_SL_SIG_POWER_QAM8 24576
#define DRXJ_QAM_SL_SIG_POWER_QAM16 40960
#define DRXJ_QAM_SL_SIG_POWER_QAM32 20480
#define DRXJ_QAM_SL_SIG_POWER_QAM64 43008
#define DRXJ_QAM_SL_SIG_POWER_QAM128 20992
#define DRXJ_QAM_SL_SIG_POWER_QAM256 43520
/*
* \brief Min supported symbolrates.
*/
#ifndef DRXJ_QAM_SYMBOLRATE_MIN
#define DRXJ_QAM_SYMBOLRATE_MIN (520000)
#endif
/*
* \brief Max supported symbolrates.
*/
#ifndef DRXJ_QAM_SYMBOLRATE_MAX
#define DRXJ_QAM_SYMBOLRATE_MAX (7233000)
#endif
/*
* \def DRXJ_QAM_MAX_WAITTIME
* \brief Maximal wait time for QAM auto constellation in ms
*/
#ifndef DRXJ_QAM_MAX_WAITTIME
#define DRXJ_QAM_MAX_WAITTIME 900
#endif
#ifndef DRXJ_QAM_FEC_LOCK_WAITTIME
#define DRXJ_QAM_FEC_LOCK_WAITTIME 150
#endif
#ifndef DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME
#define DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME 200
#endif
/*
* \def SCU status and results
* \brief SCU
*/
#define DRX_SCU_READY 0
#define DRXJ_MAX_WAITTIME 100 /* ms */
#define FEC_RS_MEASUREMENT_PERIOD 12894 /* 1 sec */
#define FEC_RS_MEASUREMENT_PRESCALE 1 /* n sec */
/*
* \def DRX_AUD_MAX_DEVIATION
* \brief Needed for calculation of prescale feature in AUD
*/
#ifndef DRXJ_AUD_MAX_FM_DEVIATION
#define DRXJ_AUD_MAX_FM_DEVIATION 100 /* kHz */
#endif
/*
* \brief Needed for calculation of NICAM prescale feature in AUD
*/
#ifndef DRXJ_AUD_MAX_NICAM_PRESCALE
#define DRXJ_AUD_MAX_NICAM_PRESCALE (9) /* dB */
#endif
/*
* \brief Needed for calculation of NICAM prescale feature in AUD
*/
#ifndef DRXJ_AUD_MAX_WAITTIME
#define DRXJ_AUD_MAX_WAITTIME 250 /* ms */
#endif
/* ATV config changed flags */
#define DRXJ_ATV_CHANGED_COEF (0x00000001UL)
#define DRXJ_ATV_CHANGED_PEAK_FLT (0x00000008UL)
#define DRXJ_ATV_CHANGED_NOISE_FLT (0x00000010UL)
#define DRXJ_ATV_CHANGED_OUTPUT (0x00000020UL)
#define DRXJ_ATV_CHANGED_SIF_ATT (0x00000040UL)
/* UIO define */
#define DRX_UIO_MODE_FIRMWARE_SMA DRX_UIO_MODE_FIRMWARE0
#define DRX_UIO_MODE_FIRMWARE_SAW DRX_UIO_MODE_FIRMWARE1
/*
* MICROCODE RELATED DEFINES
*/
/* Magic word for checking correct Endianness of microcode data */
#define DRX_UCODE_MAGIC_WORD ((((u16)'H')<<8)+((u16)'L'))
/* CRC flag in ucode header, flags field. */
#define DRX_UCODE_CRC_FLAG (0x0001)
/*
* Maximum size of buffer used to verify the microcode.
* Must be an even number
*/
#define DRX_UCODE_MAX_BUF_SIZE (DRXDAP_MAX_RCHUNKSIZE)
#if DRX_UCODE_MAX_BUF_SIZE & 1
#error DRX_UCODE_MAX_BUF_SIZE must be an even number
#endif
/*
* Power mode macros
*/
#define DRX_ISPOWERDOWNMODE(mode) ((mode == DRX_POWER_MODE_9) || \
(mode == DRX_POWER_MODE_10) || \
(mode == DRX_POWER_MODE_11) || \
(mode == DRX_POWER_MODE_12) || \
(mode == DRX_POWER_MODE_13) || \
(mode == DRX_POWER_MODE_14) || \
(mode == DRX_POWER_MODE_15) || \
(mode == DRX_POWER_MODE_16) || \
(mode == DRX_POWER_DOWN))
/* Pin safe mode macro */
#define DRXJ_PIN_SAFE_MODE 0x0000
/*============================================================================*/
/*=== GLOBAL VARIABLEs =======================================================*/
/*============================================================================*/
/*
*/
/*
* \brief Temporary register definitions.
* (register definitions that are not yet available in register master)
*/
/*****************************************************************************/
/* Audio block 0x103 is write only. To avoid shadowing in driver accessing */
/* RAM addresses directly. This must be READ ONLY to avoid problems. */
/* Writing to the interface addresses are more than only writing the RAM */
/* locations */
/*****************************************************************************/
/*
* \brief RAM location of MODUS registers
*/
#define AUD_DEM_RAM_MODUS_HI__A 0x10204A3
#define AUD_DEM_RAM_MODUS_HI__M 0xF000
#define AUD_DEM_RAM_MODUS_LO__A 0x10204A4
#define AUD_DEM_RAM_MODUS_LO__M 0x0FFF
/*
* \brief RAM location of I2S config registers
*/
#define AUD_DEM_RAM_I2S_CONFIG1__A 0x10204B1
#define AUD_DEM_RAM_I2S_CONFIG2__A 0x10204B2
/*
* \brief RAM location of DCO config registers
*/
#define AUD_DEM_RAM_DCO_B_HI__A 0x1020461
#define AUD_DEM_RAM_DCO_B_LO__A 0x1020462
#define AUD_DEM_RAM_DCO_A_HI__A 0x1020463
#define AUD_DEM_RAM_DCO_A_LO__A 0x1020464
/*
* \brief RAM location of Threshold registers
*/
#define AUD_DEM_RAM_NICAM_THRSHLD__A 0x102045A
#define AUD_DEM_RAM_A2_THRSHLD__A 0x10204BB
#define AUD_DEM_RAM_BTSC_THRSHLD__A 0x10204A6
/*
* \brief RAM location of Carrier Threshold registers
*/
#define AUD_DEM_RAM_CM_A_THRSHLD__A 0x10204AF
#define AUD_DEM_RAM_CM_B_THRSHLD__A 0x10204B0
/*
* \brief FM Matrix register fix
*/
#ifdef AUD_DEM_WR_FM_MATRIX__A
#undef AUD_DEM_WR_FM_MATRIX__A
#endif
#define AUD_DEM_WR_FM_MATRIX__A 0x105006F
/*============================================================================*/
/*
* \brief Defines required for audio
*/
#define AUD_VOLUME_ZERO_DB 115
#define AUD_VOLUME_DB_MIN -60
#define AUD_VOLUME_DB_MAX 12
#define AUD_CARRIER_STRENGTH_QP_0DB 0x4000
#define AUD_CARRIER_STRENGTH_QP_0DB_LOG10T100 421
#define AUD_MAX_AVC_REF_LEVEL 15
#define AUD_I2S_FREQUENCY_MAX 48000UL
#define AUD_I2S_FREQUENCY_MIN 12000UL
#define AUD_RDS_ARRAY_SIZE 18
/*
* \brief Needed for calculation of prescale feature in AUD
*/
#ifndef DRX_AUD_MAX_FM_DEVIATION
#define DRX_AUD_MAX_FM_DEVIATION (100) /* kHz */
#endif
/*
* \brief Needed for calculation of NICAM prescale feature in AUD
*/
#ifndef DRX_AUD_MAX_NICAM_PRESCALE
#define DRX_AUD_MAX_NICAM_PRESCALE (9) /* dB */
#endif
/*============================================================================*/
/* Values for I2S Master/Slave pin configurations */
#define SIO_PDR_I2S_CL_CFG_MODE__MASTER 0x0004
#define SIO_PDR_I2S_CL_CFG_DRIVE__MASTER 0x0008
#define SIO_PDR_I2S_CL_CFG_MODE__SLAVE 0x0004
#define SIO_PDR_I2S_CL_CFG_DRIVE__SLAVE 0x0000
#define SIO_PDR_I2S_DA_CFG_MODE__MASTER 0x0003
#define SIO_PDR_I2S_DA_CFG_DRIVE__MASTER 0x0008
#define SIO_PDR_I2S_DA_CFG_MODE__SLAVE 0x0003
#define SIO_PDR_I2S_DA_CFG_DRIVE__SLAVE 0x0008
#define SIO_PDR_I2S_WS_CFG_MODE__MASTER 0x0004
#define SIO_PDR_I2S_WS_CFG_DRIVE__MASTER 0x0008
#define SIO_PDR_I2S_WS_CFG_MODE__SLAVE 0x0004
#define SIO_PDR_I2S_WS_CFG_DRIVE__SLAVE 0x0000
/*============================================================================*/
/*=== REGISTER ACCESS MACROS =================================================*/
/*============================================================================*/
/*
* This macro is used to create byte arrays for block writes.
* Block writes speed up I2C traffic between host and demod.
* The macro takes care of the required byte order in a 16 bits word.
* x -> lowbyte(x), highbyte(x)
*/
#define DRXJ_16TO8(x) ((u8) (((u16)x) & 0xFF)), \
((u8)((((u16)x)>>8)&0xFF))
/*
* This macro is used to convert byte array to 16 bit register value for block read.
* Block read speed up I2C traffic between host and demod.
* The macro takes care of the required byte order in a 16 bits word.
*/
#define DRXJ_8TO16(x) ((u16) (x[0] | (x[1] << 8)))
/*============================================================================*/
/*=== MISC DEFINES ===========================================================*/
/*============================================================================*/
/*============================================================================*/
/*=== HI COMMAND RELATED DEFINES =============================================*/
/*============================================================================*/
/*
* \brief General maximum number of retries for ucode command interfaces
*/
#define DRXJ_MAX_RETRIES (100)
/*============================================================================*/
/*=== STANDARD RELATED MACROS ================================================*/
/*============================================================================*/
#define DRXJ_ISATVSTD(std) ((std == DRX_STANDARD_PAL_SECAM_BG) || \
(std == DRX_STANDARD_PAL_SECAM_DK) || \
(std == DRX_STANDARD_PAL_SECAM_I) || \
(std == DRX_STANDARD_PAL_SECAM_L) || \
(std == DRX_STANDARD_PAL_SECAM_LP) || \
(std == DRX_STANDARD_NTSC) || \
(std == DRX_STANDARD_FM))
#define DRXJ_ISQAMSTD(std) ((std == DRX_STANDARD_ITU_A) || \
(std == DRX_STANDARD_ITU_B) || \
(std == DRX_STANDARD_ITU_C) || \
(std == DRX_STANDARD_ITU_D))
/*-----------------------------------------------------------------------------
GLOBAL VARIABLES
----------------------------------------------------------------------------*/
/*
* DRXJ DAP structures
*/
static int drxdap_fasi_read_block(struct i2c_device_addr *dev_addr,
u32 addr,
u16 datasize,
u8 *data, u32 flags);
static int drxj_dap_read_modify_write_reg16(struct i2c_device_addr *dev_addr,
u32 waddr,
u32 raddr,
u16 wdata, u16 *rdata);
static int drxj_dap_read_reg16(struct i2c_device_addr *dev_addr,
u32 addr,
u16 *data, u32 flags);
static int drxdap_fasi_read_reg32(struct i2c_device_addr *dev_addr,
u32 addr,
u32 *data, u32 flags);
static int drxdap_fasi_write_block(struct i2c_device_addr *dev_addr,
u32 addr,
u16 datasize,
u8 *data, u32 flags);
static int drxj_dap_write_reg16(struct i2c_device_addr *dev_addr,
u32 addr,
u16 data, u32 flags);
static int drxdap_fasi_write_reg32(struct i2c_device_addr *dev_addr,
u32 addr,
u32 data, u32 flags);
static struct drxj_data drxj_data_g = {
false, /* has_lna : true if LNA (aka PGA) present */
false, /* has_oob : true if OOB supported */
false, /* has_ntsc: true if NTSC supported */
false, /* has_btsc: true if BTSC supported */
false, /* has_smatx: true if SMA_TX pin is available */
false, /* has_smarx: true if SMA_RX pin is available */
false, /* has_gpio : true if GPIO pin is available */
false, /* has_irqn : true if IRQN pin is available */
0, /* mfx A1/A2/A... */
/* tuner settings */
false, /* tuner mirrors RF signal */
/* standard/channel settings */
DRX_STANDARD_UNKNOWN, /* current standard */
DRX_CONSTELLATION_AUTO, /* constellation */
0, /* frequency in KHz */
DRX_BANDWIDTH_UNKNOWN, /* curr_bandwidth */
DRX_MIRROR_NO, /* mirror */
/* signal quality information: */
/* default values taken from the QAM Programming guide */
/* fec_bits_desired should not be less than 4000000 */
4000000, /* fec_bits_desired */
5, /* fec_vd_plen */
4, /* qam_vd_prescale */
0xFFFF, /* qamVDPeriod */
204 * 8, /* fec_rs_plen annex A */
1, /* fec_rs_prescale */
FEC_RS_MEASUREMENT_PERIOD, /* fec_rs_period */
true, /* reset_pkt_err_acc */
0, /* pkt_err_acc_start */
/* HI configuration */
0, /* hi_cfg_timing_div */
0, /* hi_cfg_bridge_delay */
0, /* hi_cfg_wake_up_key */
0, /* hi_cfg_ctrl */
0, /* HICfgTimeout */
/* UIO configuration */
DRX_UIO_MODE_DISABLE, /* uio_sma_rx_mode */
DRX_UIO_MODE_DISABLE, /* uio_sma_tx_mode */
DRX_UIO_MODE_DISABLE, /* uioASELMode */
DRX_UIO_MODE_DISABLE, /* uio_irqn_mode */
/* FS setting */
0UL, /* iqm_fs_rate_ofs */
false, /* pos_image */
/* RC setting */
0UL, /* iqm_rc_rate_ofs */
/* AUD information */
/* false, * flagSetAUDdone */
/* false, * detectedRDS */
/* true, * flagASDRequest */
/* false, * flagHDevClear */
/* false, * flagHDevSet */
/* (u16) 0xFFF, * rdsLastCount */
/* ATV configuration */
0UL, /* flags cfg changes */
/* shadow of ATV_TOP_EQU0__A */
{-5,
ATV_TOP_EQU0_EQU_C0_FM,
ATV_TOP_EQU0_EQU_C0_L,
ATV_TOP_EQU0_EQU_C0_LP,
ATV_TOP_EQU0_EQU_C0_BG,
ATV_TOP_EQU0_EQU_C0_DK,
ATV_TOP_EQU0_EQU_C0_I},
/* shadow of ATV_TOP_EQU1__A */
{-50,
ATV_TOP_EQU1_EQU_C1_FM,
ATV_TOP_EQU1_EQU_C1_L,
ATV_TOP_EQU1_EQU_C1_LP,
ATV_TOP_EQU1_EQU_C1_BG,
ATV_TOP_EQU1_EQU_C1_DK,
ATV_TOP_EQU1_EQU_C1_I},
/* shadow of ATV_TOP_EQU2__A */
{210,
ATV_TOP_EQU2_EQU_C2_FM,
ATV_TOP_EQU2_EQU_C2_L,
ATV_TOP_EQU2_EQU_C2_LP,
ATV_TOP_EQU2_EQU_C2_BG,
ATV_TOP_EQU2_EQU_C2_DK,
ATV_TOP_EQU2_EQU_C2_I},
/* shadow of ATV_TOP_EQU3__A */
{-160,
ATV_TOP_EQU3_EQU_C3_FM,
ATV_TOP_EQU3_EQU_C3_L,
ATV_TOP_EQU3_EQU_C3_LP,
ATV_TOP_EQU3_EQU_C3_BG,
ATV_TOP_EQU3_EQU_C3_DK,
ATV_TOP_EQU3_EQU_C3_I},
false, /* flag: true=bypass */
ATV_TOP_VID_PEAK__PRE, /* shadow of ATV_TOP_VID_PEAK__A */
ATV_TOP_NOISE_TH__PRE, /* shadow of ATV_TOP_NOISE_TH__A */
true, /* flag CVBS output enable */
false, /* flag SIF output enable */
DRXJ_SIF_ATTENUATION_0DB, /* current SIF att setting */
{ /* qam_rf_agc_cfg */
DRX_STANDARD_ITU_B, /* standard */
DRX_AGC_CTRL_AUTO, /* ctrl_mode */
0, /* output_level */
0, /* min_output_level */
0xFFFF, /* max_output_level */
0x0000, /* speed */
0x0000, /* top */
0x0000 /* c.o.c. */
},
{ /* qam_if_agc_cfg */
DRX_STANDARD_ITU_B, /* standard */
DRX_AGC_CTRL_AUTO, /* ctrl_mode */
0, /* output_level */
0, /* min_output_level */
0xFFFF, /* max_output_level */
0x0000, /* speed */
0x0000, /* top (don't care) */
0x0000 /* c.o.c. (don't care) */
},
{ /* vsb_rf_agc_cfg */
DRX_STANDARD_8VSB, /* standard */
DRX_AGC_CTRL_AUTO, /* ctrl_mode */
0, /* output_level */
0, /* min_output_level */
0xFFFF, /* max_output_level */
0x0000, /* speed */
0x0000, /* top (don't care) */
0x0000 /* c.o.c. (don't care) */
},
{ /* vsb_if_agc_cfg */
DRX_STANDARD_8VSB, /* standard */
DRX_AGC_CTRL_AUTO, /* ctrl_mode */
0, /* output_level */
0, /* min_output_level */
0xFFFF, /* max_output_level */
0x0000, /* speed */
0x0000, /* top (don't care) */
0x0000 /* c.o.c. (don't care) */
},
0, /* qam_pga_cfg */
0, /* vsb_pga_cfg */
{ /* qam_pre_saw_cfg */
DRX_STANDARD_ITU_B, /* standard */
0, /* reference */
false /* use_pre_saw */
},
{ /* vsb_pre_saw_cfg */
DRX_STANDARD_8VSB, /* standard */
0, /* reference */
false /* use_pre_saw */
},
/* Version information */
#ifndef _CH_
{
"01234567890", /* human readable version microcode */
"01234567890" /* human readable version device specific code */
},
{
{ /* struct drx_version for microcode */
DRX_MODULE_UNKNOWN,
(char *)(NULL),
0,
0,
0,
(char *)(NULL)
},
{ /* struct drx_version for device specific code */
DRX_MODULE_UNKNOWN,
(char *)(NULL),
0,
0,
0,
(char *)(NULL)
}
},
{
{ /* struct drx_version_list for microcode */
(struct drx_version *) (NULL),
(struct drx_version_list *) (NULL)
},
{ /* struct drx_version_list for device specific code */
(struct drx_version *) (NULL),
(struct drx_version_list *) (NULL)
}
},
#endif
false, /* smart_ant_inverted */
/* Tracking filter setting for OOB */
{
12000,
9300,
6600,
5280,
3700,
3000,
2000,
0},
false, /* oob_power_on */
0, /* mpeg_ts_static_bitrate */
false, /* disable_te_ihandling */
false, /* bit_reverse_mpeg_outout */
DRXJ_MPEGOUTPUT_CLOCK_RATE_AUTO, /* mpeg_output_clock_rate */
DRXJ_MPEG_START_WIDTH_1CLKCYC, /* mpeg_start_width */
/* Pre SAW & Agc configuration for ATV */
{
DRX_STANDARD_NTSC, /* standard */
7, /* reference */
true /* use_pre_saw */
},
{ /* ATV RF-AGC */
DRX_STANDARD_NTSC, /* standard */
DRX_AGC_CTRL_AUTO, /* ctrl_mode */
0, /* output_level */
0, /* min_output_level (d.c.) */
0, /* max_output_level (d.c.) */
3, /* speed */
9500, /* top */
4000 /* cut-off current */
},
{ /* ATV IF-AGC */
DRX_STANDARD_NTSC, /* standard */
DRX_AGC_CTRL_AUTO, /* ctrl_mode */
0, /* output_level */
0, /* min_output_level (d.c.) */
0, /* max_output_level (d.c.) */
3, /* speed */
2400, /* top */
0 /* c.o.c. (d.c.) */
},
140, /* ATV PGA config */
0, /* curr_symbol_rate */
false, /* pdr_safe_mode */
SIO_PDR_GPIO_CFG__PRE, /* pdr_safe_restore_val_gpio */
SIO_PDR_VSYNC_CFG__PRE, /* pdr_safe_restore_val_v_sync */
SIO_PDR_SMA_RX_CFG__PRE, /* pdr_safe_restore_val_sma_rx */
SIO_PDR_SMA_TX_CFG__PRE, /* pdr_safe_restore_val_sma_tx */
4, /* oob_pre_saw */
DRXJ_OOB_LO_POW_MINUS10DB, /* oob_lo_pow */
{
false /* aud_data, only first member */
},
};
/*
* \var drxj_default_addr_g
* \brief Default I2C address and device identifier.
*/
static struct i2c_device_addr drxj_default_addr_g = {
DRXJ_DEF_I2C_ADDR, /* i2c address */
DRXJ_DEF_DEMOD_DEV_ID /* device id */
};
/*
* \var drxj_default_comm_attr_g
* \brief Default common attributes of a drxj demodulator instance.
*/
static struct drx_common_attr drxj_default_comm_attr_g = {
NULL, /* ucode file */
true, /* ucode verify switch */
{0}, /* version record */
44000, /* IF in kHz in case no tuner instance is used */
(151875 - 0), /* system clock frequency in kHz */
0, /* oscillator frequency kHz */
0, /* oscillator deviation in ppm, signed */
false, /* If true mirror frequency spectrum */
{
/* MPEG output configuration */
true, /* If true, enable MPEG output */
false, /* If true, insert RS byte */
false, /* If true, parallel out otherwise serial */
false, /* If true, invert DATA signals */
false, /* If true, invert ERR signal */
false, /* If true, invert STR signals */
false, /* If true, invert VAL signals */
false, /* If true, invert CLK signals */
true, /* If true, static MPEG clockrate will
be used, otherwise clockrate will
adapt to the bitrate of the TS */
19392658UL, /* Maximum bitrate in b/s in case
static clockrate is selected */
DRX_MPEG_STR_WIDTH_1 /* MPEG Start width in clock cycles */
},
/* Initilisations below can be omitted, they require no user input and
are initially 0, NULL or false. The compiler will initialize them to these
values when omitted. */
false, /* is_opened */
/* SCAN */
NULL, /* no scan params yet */
0, /* current scan index */
0, /* next scan frequency */
false, /* scan ready flag */
0, /* max channels to scan */
0, /* nr of channels scanned */
NULL, /* default scan function */
NULL, /* default context pointer */
0, /* millisec to wait for demod lock */
DRXJ_DEMOD_LOCK, /* desired lock */
false,
/* Power management */
DRX_POWER_UP,
/* Tuner */
1, /* nr of I2C port to which tuner is */
0L, /* minimum RF input frequency, in kHz */
0L, /* maximum RF input frequency, in kHz */
false, /* Rf Agc Polarity */
false, /* If Agc Polarity */
false, /* tuner slow mode */
{ /* current channel (all 0) */
0UL /* channel.frequency */
},
DRX_STANDARD_UNKNOWN, /* current standard */
DRX_STANDARD_UNKNOWN, /* previous standard */
DRX_STANDARD_UNKNOWN, /* di_cache_standard */
false, /* use_bootloader */
0UL, /* capabilities */
0 /* mfx */
};
/*
* \var drxj_default_demod_g
* \brief Default drxj demodulator instance.
*/
static struct drx_demod_instance drxj_default_demod_g = {
&drxj_default_addr_g, /* i2c address & device id */
&drxj_default_comm_attr_g, /* demod common attributes */
&drxj_data_g /* demod device specific attributes */
};
/*
* \brief Default audio data structure for DRK demodulator instance.
*
* This structure is DRXK specific.
*
*/
static struct drx_aud_data drxj_default_aud_data_g = {
false, /* audio_is_active */
DRX_AUD_STANDARD_AUTO, /* audio_standard */
/* i2sdata */
{
false, /* output_enable */
48000, /* frequency */
DRX_I2S_MODE_MASTER, /* mode */
DRX_I2S_WORDLENGTH_32, /* word_length */
DRX_I2S_POLARITY_RIGHT, /* polarity */
DRX_I2S_FORMAT_WS_WITH_DATA /* format */
},
/* volume */
{
true, /* mute; */
0, /* volume */
DRX_AUD_AVC_OFF, /* avc_mode */
0, /* avc_ref_level */
DRX_AUD_AVC_MAX_GAIN_12DB, /* avc_max_gain */
DRX_AUD_AVC_MAX_ATTEN_24DB, /* avc_max_atten */
0, /* strength_left */
0 /* strength_right */
},
DRX_AUD_AUTO_SOUND_SELECT_ON_CHANGE_ON, /* auto_sound */
/* ass_thresholds */
{
440, /* A2 */
12, /* BTSC */
700, /* NICAM */
},
/* carrier */
{
/* a */
{
42, /* thres */
DRX_NO_CARRIER_NOISE, /* opt */
0, /* shift */
0 /* dco */
},
/* b */
{
42, /* thres */
DRX_NO_CARRIER_MUTE, /* opt */
0, /* shift */
0 /* dco */
},
},
/* mixer */
{
DRX_AUD_SRC_STEREO_OR_A, /* source_i2s */
DRX_AUD_I2S_MATRIX_STEREO, /* matrix_i2s */
DRX_AUD_FM_MATRIX_SOUND_A /* matrix_fm */
},
DRX_AUD_DEVIATION_NORMAL, /* deviation */
DRX_AUD_AVSYNC_OFF, /* av_sync */
/* prescale */
{
DRX_AUD_MAX_FM_DEVIATION, /* fm_deviation */
DRX_AUD_MAX_NICAM_PRESCALE /* nicam_gain */
},
DRX_AUD_FM_DEEMPH_75US, /* deemph */
DRX_BTSC_STEREO, /* btsc_detect */
0, /* rds_data_counter */
false /* rds_data_present */
};
/*-----------------------------------------------------------------------------
STRUCTURES
----------------------------------------------------------------------------*/
struct drxjeq_stat {
u16 eq_mse;
u8 eq_mode;
u8 eq_ctrl;
u8 eq_stat;
};
/* HI command */
struct drxj_hi_cmd {
u16 cmd;
u16 param1;
u16 param2;
u16 param3;
u16 param4;
u16 param5;
u16 param6;
};
/*============================================================================*/
/*=== MICROCODE RELATED STRUCTURES ===========================================*/
/*============================================================================*/
/*
* struct drxu_code_block_hdr - Structure of the microcode block headers
*
* @addr: Destination address of the data in this block
* @size: Size of the block data following this header counted in
* 16 bits words
* @CRC: CRC value of the data block, only valid if CRC flag is
* set.
*/
struct drxu_code_block_hdr {
u32 addr;
u16 size;
u16 flags;
u16 CRC;
};
/*-----------------------------------------------------------------------------
FUNCTIONS
----------------------------------------------------------------------------*/
/* Some prototypes */
static int
hi_command(struct i2c_device_addr *dev_addr,
const struct drxj_hi_cmd *cmd, u16 *result);
static int
ctrl_lock_status(struct drx_demod_instance *demod, enum drx_lock_status *lock_stat);
static int
ctrl_power_mode(struct drx_demod_instance *demod, enum drx_power_mode *mode);
static int power_down_aud(struct drx_demod_instance *demod);
static int
ctrl_set_cfg_pre_saw(struct drx_demod_instance *demod, struct drxj_cfg_pre_saw *pre_saw);
static int
ctrl_set_cfg_afe_gain(struct drx_demod_instance *demod, struct drxj_cfg_afe_gain *afe_gain);
/*============================================================================*/
/*============================================================================*/
/*== HELPER FUNCTIONS ==*/
/*============================================================================*/
/*============================================================================*/
/*============================================================================*/
/*
* \fn u32 frac28(u32 N, u32 D)
* \brief Compute: (1<<28)*N/D
* \param N 32 bits
* \param D 32 bits
* \return (1<<28)*N/D
* This function is used to avoid floating-point calculations as they may
* not be present on the target platform.
* frac28 performs an unsigned 28/28 bits division to 32-bit fixed point
* fraction used for setting the Frequency Shifter registers.
* N and D can hold numbers up to width: 28-bits.
* The 4 bits integer part and the 28 bits fractional part are calculated.
* Usage condition: ((1<<28)*n)/d < ((1<<32)-1) => (n/d) < 15.999
* N: 0...(1<<28)-1 = 268435454
* D: 0...(1<<28)-1
* Q: 0...(1<<32)-1
*/
static u32 frac28(u32 N, u32 D)
{
int i = 0;
u32 Q1 = 0;
u32 R0 = 0;
R0 = (N % D) << 4; /* 32-28 == 4 shifts possible at max */
Q1 = N / D; /* integer part, only the 4 least significant bits
will be visible in the result */
/* division using radix 16, 7 nibbles in the result */
for (i = 0; i < 7; i++) {
Q1 = (Q1 << 4) | R0 / D;
R0 = (R0 % D) << 4;
}
/* rounding */
if ((R0 >> 3) >= D)
Q1++;
return Q1;
}
/*
* \fn u32 log1_times100( u32 x)
* \brief Compute: 100*log10(x)
* \param x 32 bits
* \return 100*log10(x)
*
* 100*log10(x)
* = 100*(log2(x)/log2(10)))
* = (100*(2^15)*log2(x))/((2^15)*log2(10))
* = ((200*(2^15)*log2(x))/((2^15)*log2(10)))/2
* = ((200*(2^15)*(log2(x/y)+log2(y)))/((2^15)*log2(10)))/2
* = ((200*(2^15)*log2(x/y))+(200*(2^15)*log2(y)))/((2^15)*log2(10)))/2
*
* where y = 2^k and 1<= (x/y) < 2
*/
static u32 log1_times100(u32 x)
{
static const u8 scale = 15;
static const u8 index_width = 5;
/*
log2lut[n] = (1<<scale) * 200 * log2( 1.0 + ( (1.0/(1<<INDEXWIDTH)) * n ))
0 <= n < ((1<<INDEXWIDTH)+1)
*/
static const u32 log2lut[] = {
0, /* 0.000000 */
290941, /* 290941.300628 */
573196, /* 573196.476418 */
847269, /* 847269.179851 */
1113620, /* 1113620.489452 */
1372674, /* 1372673.576986 */
1624818, /* 1624817.752104 */
1870412, /* 1870411.981536 */
2109788, /* 2109787.962654 */
2343253, /* 2343252.817465 */
2571091, /* 2571091.461923 */
2793569, /* 2793568.696416 */
3010931, /* 3010931.055901 */
3223408, /* 3223408.452106 */
3431216, /* 3431215.635215 */
3634553, /* 3634553.498355 */
3833610, /* 3833610.244726 */
4028562, /* 4028562.434393 */
4219576, /* 4219575.925308 */
4406807, /* 4406806.721144 */
4590402, /* 4590401.736809 */
4770499, /* 4770499.491025 */
4947231, /* 4947230.734179 */
5120719, /* 5120719.018555 */
5291081, /* 5291081.217197 */
5458428, /* 5458427.996830 */
5622864, /* 5622864.249668 */
5784489, /* 5784489.488298 */
5943398, /* 5943398.207380 */
6099680, /* 6099680.215452 */
6253421, /* 6253420.939751 */
6404702, /* 6404701.706649 */
6553600, /* 6553600.000000 */
};
u8 i = 0;
u32 y = 0;
u32 d = 0;
u32 k = 0;
u32 r = 0;
if (x == 0)
return 0;
/* Scale x (normalize) */
/* computing y in log(x/y) = log(x) - log(y) */
if ((x & (((u32) (-1)) << (scale + 1))) == 0) {
for (k = scale; k > 0; k--) {
if (x & (((u32) 1) << scale))
break;
x <<= 1;
}
} else {
for (k = scale; k < 31; k++) {
if ((x & (((u32) (-1)) << (scale + 1))) == 0)
break;
x >>= 1;
}
}
/*
Now x has binary point between bit[scale] and bit[scale-1]
and 1.0 <= x < 2.0 */
/* correction for division: log(x) = log(x/y)+log(y) */
y = k * ((((u32) 1) << scale) * 200);
/* remove integer part */
x &= ((((u32) 1) << scale) - 1);
/* get index */
i = (u8) (x >> (scale - index_width));
/* compute delta (x-a) */
d = x & ((((u32) 1) << (scale - index_width)) - 1);
/* compute log, multiplication ( d* (.. )) must be within range ! */
y += log2lut[i] +
((d * (log2lut[i + 1] - log2lut[i])) >> (scale - index_width));
/* Conver to log10() */
y /= 108853; /* (log2(10) << scale) */
r = (y >> 1);
/* rounding */
if (y & ((u32)1))
r++;
return r;
}
/*
* \fn u32 frac_times1e6( u16 N, u32 D)
* \brief Compute: (N/D) * 1000000.
* \param N nominator 16-bits.
* \param D denominator 32-bits.
* \return u32
* \retval ((N/D) * 1000000), 32 bits
*
* No check on D=0!
*/
static u32 frac_times1e6(u32 N, u32 D)
{
u32 remainder = 0;
u32 frac = 0;
/*
frac = (N * 1000000) / D
To let it fit in a 32 bits computation:
frac = (N * (1000000 >> 4)) / (D >> 4)
This would result in a problem in case D < 16 (div by 0).
So we do it more elaborate as shown below.
*/
frac = (((u32) N) * (1000000 >> 4)) / D;
frac <<= 4;
remainder = (((u32) N) * (1000000 >> 4)) % D;
remainder <<= 4;
frac += remainder / D;
remainder = remainder % D;
if ((remainder * 2) > D)
frac++;
return frac;
}
/*============================================================================*/
/*
* \brief Values for NICAM prescaler gain. Computed from dB to integer
* and rounded. For calc used formula: 16*10^(prescaleGain[dB]/20).
*
*/
#if 0
/* Currently, unused as we lack support for analog TV */
static const u16 nicam_presc_table_val[43] = {
1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 4, 4,
5, 5, 6, 6, 7, 8, 9, 10, 11, 13, 14, 16,
18, 20, 23, 25, 28, 32, 36, 40, 45,
51, 57, 64, 71, 80, 90, 101, 113, 127
};
#endif
/*============================================================================*/
/*== END HELPER FUNCTIONS ==*/
/*============================================================================*/
/*============================================================================*/
/*============================================================================*/
/*== DRXJ DAP FUNCTIONS ==*/
/*============================================================================*/
/*============================================================================*/
/*
This layer takes care of some device specific register access protocols:
-conversion to short address format
-access to audio block
This layer is placed between the drx_dap_fasi and the rest of the drxj
specific implementation. This layer can use address map knowledge whereas
dap_fasi may not use memory map knowledge.
* For audio currently only 16 bits read and write register access is
supported. More is not needed. RMW and 32 or 8 bit access on audio
registers will have undefined behaviour. Flags (RMW, CRC reset, broadcast
single/multi master) will be ignored.
TODO: check ignoring single/multimaster is ok for AUD access ?
*/
#define DRXJ_ISAUDWRITE(addr) (((((addr)>>16)&1) == 1) ? true : false)
#define DRXJ_DAP_AUDTRIF_TIMEOUT 80 /* millisec */
/*============================================================================*/
/*
* \fn bool is_handled_by_aud_tr_if( u32 addr )
* \brief Check if this address is handled by the audio token ring interface.
* \param addr
* \return bool
* \retval true Yes, handled by audio token ring interface
* \retval false No, not handled by audio token ring interface
*
*/
static
bool is_handled_by_aud_tr_if(u32 addr)
{
bool retval = false;
if ((DRXDAP_FASI_ADDR2BLOCK(addr) == 4) &&
(DRXDAP_FASI_ADDR2BANK(addr) > 1) &&
(DRXDAP_FASI_ADDR2BANK(addr) < 6)) {
retval = true;
}
return retval;
}
/*============================================================================*/
int drxbsp_i2c_write_read(struct i2c_device_addr *w_dev_addr,
u16 w_count,
u8 *wData,
struct i2c_device_addr *r_dev_addr,
u16 r_count, u8 *r_data)
{
struct drx39xxj_state *state;
struct i2c_msg msg[2];
unsigned int num_msgs;
if (w_dev_addr == NULL) {
/* Read only */
state = r_dev_addr->user_data;
msg[0].addr = r_dev_addr->i2c_addr >> 1;
msg[0].flags = I2C_M_RD;
msg[0].buf = r_data;
msg[0].len = r_count;
num_msgs = 1;
} else if (r_dev_addr == NULL) {
/* Write only */
state = w_dev_addr->user_data;
msg[0].addr = w_dev_addr->i2c_addr >> 1;
msg[0].flags = 0;
msg[0].buf = wData;
msg[0].len = w_count;
num_msgs = 1;
} else {
/* Both write and read */
state = w_dev_addr->user_data;
msg[0].addr = w_dev_addr->i2c_addr >> 1;
msg[0].flags = 0;
msg[0].buf = wData;
msg[0].len = w_count;
msg[1].addr = r_dev_addr->i2c_addr >> 1;
msg[1].flags = I2C_M_RD;
msg[1].buf = r_data;
msg[1].len = r_count;
num_msgs = 2;
}
if (state->i2c == NULL) {
pr_err("i2c was zero, aborting\n");
return 0;
}
if (i2c_transfer(state->i2c, msg, num_msgs) != num_msgs) {
pr_warn("drx3933: I2C write/read failed\n");
return -EREMOTEIO;
}
#ifdef DJH_DEBUG
if (w_dev_addr == NULL || r_dev_addr == NULL)
return 0;
state = w_dev_addr->user_data;
if (state->i2c == NULL)
return 0;
msg[0].addr = w_dev_addr->i2c_addr;
msg[0].flags = 0;
msg[0].buf = wData;
msg[0].len = w_count;
msg[1].addr = r_dev_addr->i2c_addr;
msg[1].flags = I2C_M_RD;
msg[1].buf = r_data;
msg[1].len = r_count;
num_msgs = 2;
pr_debug("drx3933 i2c operation addr=%x i2c=%p, wc=%x rc=%x\n",
w_dev_addr->i2c_addr, state->i2c, w_count, r_count);
if (i2c_transfer(state->i2c, msg, 2) != 2) {
pr_warn("drx3933: I2C write/read failed\n");
return -EREMOTEIO;
}
#endif
return 0;
}
/*============================================================================*/
/*****************************
*
* int drxdap_fasi_read_block (
* struct i2c_device_addr *dev_addr, -- address of I2C device
* u32 addr, -- address of chip register/memory
* u16 datasize, -- number of bytes to read
* u8 *data, -- data to receive
* u32 flags) -- special device flags
*
* Read block data from chip address. Because the chip is word oriented,
* the number of bytes to read must be even.
*
* Make sure that the buffer to receive the data is large enough.
*
* Although this function expects an even number of bytes, it is still byte
* oriented, and the data read back is NOT translated to the endianness of
* the target platform.
*
* Output:
* - 0 if reading was successful
* in that case: data read is in *data.
* - -EIO if anything went wrong
*
******************************/
static int drxdap_fasi_read_block(struct i2c_device_addr *dev_addr,
u32 addr,
u16 datasize,
u8 *data, u32 flags)
{
u8 buf[4];
u16 bufx;
int rc;
u16 overhead_size = 0;
/* Check parameters ******************************************************* */
if (dev_addr == NULL)
return -EINVAL;
overhead_size = (IS_I2C_10BIT(dev_addr->i2c_addr) ? 2 : 1) +
(DRXDAP_FASI_LONG_FORMAT(addr) ? 4 : 2);
if ((DRXDAP_FASI_OFFSET_TOO_LARGE(addr)) ||
((!(DRXDAPFASI_LONG_ADDR_ALLOWED)) &&
DRXDAP_FASI_LONG_FORMAT(addr)) ||
(overhead_size > (DRXDAP_MAX_WCHUNKSIZE)) ||
((datasize != 0) && (data == NULL)) || ((datasize & 1) == 1)) {
return -EINVAL;
}
/* ReadModifyWrite & mode flag bits are not allowed */
flags &= (~DRXDAP_FASI_RMW & ~DRXDAP_FASI_MODEFLAGS);
#if DRXDAP_SINGLE_MASTER
flags |= DRXDAP_FASI_SINGLE_MASTER;
#endif
/* Read block from I2C **************************************************** */
do {
u16 todo = (datasize < DRXDAP_MAX_RCHUNKSIZE ?
datasize : DRXDAP_MAX_RCHUNKSIZE);
bufx = 0;
addr &= ~DRXDAP_FASI_FLAGS;
addr |= flags;
#if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 1) && (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1))
/* short format address preferred but long format otherwise */
if (DRXDAP_FASI_LONG_FORMAT(addr)) {
#endif
#if (DRXDAPFASI_LONG_ADDR_ALLOWED == 1)
buf[bufx++] = (u8) (((addr << 1) & 0xFF) | 0x01);
buf[bufx++] = (u8) ((addr >> 16) & 0xFF);
buf[bufx++] = (u8) ((addr >> 24) & 0xFF);
buf[bufx++] = (u8) ((addr >> 7) & 0xFF);
#endif
#if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 1) && (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1))
} else {
#endif
#if (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1)
buf[bufx++] = (u8) ((addr << 1) & 0xFF);
buf[bufx++] =
(u8) (((addr >> 16) & 0x0F) |
((addr >> 18) & 0xF0));
#endif
#if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 1) && (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1))
}
#endif
#if DRXDAP_SINGLE_MASTER
/*
* In single master mode, split the read and write actions.
* No special action is needed for write chunks here.
*/
rc = drxbsp_i2c_write_read(dev_addr, bufx, buf,
NULL, 0, NULL);
if (rc == 0)
rc = drxbsp_i2c_write_read(NULL, 0, NULL, dev_addr, todo, data);
#else
/* In multi master mode, do everything in one RW action */
rc = drxbsp_i2c_write_read(dev_addr, bufx, buf, dev_addr, todo,
data);
#endif
data += todo;
addr += (todo >> 1);
datasize -= todo;
} while (datasize && rc == 0);
return rc;
}
/*****************************
*
* int drxdap_fasi_read_reg16 (
* struct i2c_device_addr *dev_addr, -- address of I2C device
* u32 addr, -- address of chip register/memory
* u16 *data, -- data to receive
* u32 flags) -- special device flags
*
* Read one 16-bit register or memory location. The data received back is
* converted back to the target platform's endianness.
*
* Output:
* - 0 if reading was successful
* in that case: read data is at *data
* - -EIO if anything went wrong
*
******************************/
static int drxdap_fasi_read_reg16(struct i2c_device_addr *dev_addr,
u32 addr,
u16 *data, u32 flags)
{
u8 buf[sizeof(*data)];
int rc;
if (!data)
return -EINVAL;
rc = drxdap_fasi_read_block(dev_addr, addr, sizeof(*data), buf, flags);
*data = buf[0] + (((u16) buf[1]) << 8);
return rc;
}
/*****************************
*
* int drxdap_fasi_read_reg32 (
* struct i2c_device_addr *dev_addr, -- address of I2C device
* u32 addr, -- address of chip register/memory
* u32 *data, -- data to receive
* u32 flags) -- special device flags
*
* Read one 32-bit register or memory location. The data received back is
* converted back to the target platform's endianness.
*
* Output:
* - 0 if reading was successful
* in that case: read data is at *data
* - -EIO if anything went wrong
*
******************************/
static int drxdap_fasi_read_reg32(struct i2c_device_addr *dev_addr,
u32 addr,
u32 *data, u32 flags)
{
u8 buf[sizeof(*data)];
int rc;
if (!data)
return -EINVAL;
rc = drxdap_fasi_read_block(dev_addr, addr, sizeof(*data), buf, flags);
*data = (((u32) buf[0]) << 0) +
(((u32) buf[1]) << 8) +
(((u32) buf[2]) << 16) + (((u32) buf[3]) << 24);
return rc;
}
/*****************************
*
* int drxdap_fasi_write_block (
* struct i2c_device_addr *dev_addr, -- address of I2C device
* u32 addr, -- address of chip register/memory
* u16 datasize, -- number of bytes to read
* u8 *data, -- data to receive
* u32 flags) -- special device flags
*
* Write block data to chip address. Because the chip is word oriented,
* the number of bytes to write must be even.
*
* Although this function expects an even number of bytes, it is still byte
* oriented, and the data being written is NOT translated from the endianness of
* the target platform.
*
* Output:
* - 0 if writing was successful
* - -EIO if anything went wrong
*
******************************/
static int drxdap_fasi_write_block(struct i2c_device_addr *dev_addr,
u32 addr,
u16 datasize,
u8 *data, u32 flags)
{
u8 buf[DRXDAP_MAX_WCHUNKSIZE];
int st = -EIO;
int first_err = 0;
u16 overhead_size = 0;
u16 block_size = 0;
/* Check parameters ******************************************************* */
if (dev_addr == NULL)
return -EINVAL;
overhead_size = (IS_I2C_10BIT(dev_addr->i2c_addr) ? 2 : 1) +
(DRXDAP_FASI_LONG_FORMAT(addr) ? 4 : 2);
if ((DRXDAP_FASI_OFFSET_TOO_LARGE(addr)) ||
((!(DRXDAPFASI_LONG_ADDR_ALLOWED)) &&
DRXDAP_FASI_LONG_FORMAT(addr)) ||
(overhead_size > (DRXDAP_MAX_WCHUNKSIZE)) ||
((datasize != 0) && (data == NULL)) || ((datasize & 1) == 1))
return -EINVAL;
flags &= DRXDAP_FASI_FLAGS;
flags &= ~DRXDAP_FASI_MODEFLAGS;
#if DRXDAP_SINGLE_MASTER
flags |= DRXDAP_FASI_SINGLE_MASTER;
#endif
/* Write block to I2C ***************************************************** */
block_size = ((DRXDAP_MAX_WCHUNKSIZE) - overhead_size) & ~1;
do {
u16 todo = 0;
u16 bufx = 0;
/* Buffer device address */
addr &= ~DRXDAP_FASI_FLAGS;
addr |= flags;
#if (((DRXDAPFASI_LONG_ADDR_ALLOWED) == 1) && ((DRXDAPFASI_SHORT_ADDR_ALLOWED) == 1))
/* short format address preferred but long format otherwise */
if (DRXDAP_FASI_LONG_FORMAT(addr)) {
#endif
#if ((DRXDAPFASI_LONG_ADDR_ALLOWED) == 1)
buf[bufx++] = (u8) (((addr << 1) & 0xFF) | 0x01);
buf[bufx++] = (u8) ((addr >> 16) & 0xFF);
buf[bufx++] = (u8) ((addr >> 24) & 0xFF);
buf[bufx++] = (u8) ((addr >> 7) & 0xFF);
#endif
#if (((DRXDAPFASI_LONG_ADDR_ALLOWED) == 1) && ((DRXDAPFASI_SHORT_ADDR_ALLOWED) == 1))
} else {
#endif
#if ((DRXDAPFASI_SHORT_ADDR_ALLOWED) == 1)
buf[bufx++] = (u8) ((addr << 1) & 0xFF);
buf[bufx++] =
(u8) (((addr >> 16) & 0x0F) |
((addr >> 18) & 0xF0));
#endif
#if (((DRXDAPFASI_LONG_ADDR_ALLOWED) == 1) && ((DRXDAPFASI_SHORT_ADDR_ALLOWED) == 1))
}
#endif
/*
In single master mode block_size can be 0. In such a case this I2C
sequense will be visible: (1) write address {i2c addr,
4 bytes chip address} (2) write data {i2c addr, 4 bytes data }
(3) write address (4) write data etc...
Address must be rewritten because HI is reset after data transport and
expects an address.
*/
todo = (block_size < datasize ? block_size : datasize);
if (todo == 0) {
u16 overhead_size_i2c_addr = 0;
u16 data_block_size = 0;
overhead_size_i2c_addr =
(IS_I2C_10BIT(dev_addr->i2c_addr) ? 2 : 1);
data_block_size =
(DRXDAP_MAX_WCHUNKSIZE - overhead_size_i2c_addr) & ~1;
/* write device address */
st = drxbsp_i2c_write_read(dev_addr,
(u16) (bufx),
buf,
(struct i2c_device_addr *)(NULL),
0, (u8 *)(NULL));
if ((st != 0) && (first_err == 0)) {
/* at the end, return the first error encountered */
first_err = st;
}
bufx = 0;
todo =
(data_block_size <
datasize ? data_block_size : datasize);
}
memcpy(&buf[bufx], data, todo);
/* write (address if can do and) data */
st = drxbsp_i2c_write_read(dev_addr,
(u16) (bufx + todo),
buf,
(struct i2c_device_addr *)(NULL),
0, (u8 *)(NULL));
if ((st != 0) && (first_err == 0)) {
/* at the end, return the first error encountered */
first_err = st;
}
datasize -= todo;
data += todo;
addr += (todo >> 1);
} while (datasize);
return first_err;
}
/*****************************
*
* int drxdap_fasi_write_reg16 (
* struct i2c_device_addr *dev_addr, -- address of I2C device
* u32 addr, -- address of chip register/memory
* u16 data, -- data to send
* u32 flags) -- special device flags
*
* Write one 16-bit register or memory location. The data being written is
* converted from the target platform's endianness to little endian.
*
* Output:
* - 0 if writing was successful
* - -EIO if anything went wrong
*
******************************/
static int drxdap_fasi_write_reg16(struct i2c_device_addr *dev_addr,
u32 addr,
u16 data, u32 flags)
{
u8 buf[sizeof(data)];
buf[0] = (u8) ((data >> 0) & 0xFF);
buf[1] = (u8) ((data >> 8) & 0xFF);
return drxdap_fasi_write_block(dev_addr, addr, sizeof(data), buf, flags);
}
/*****************************
*
* int drxdap_fasi_read_modify_write_reg16 (
* struct i2c_device_addr *dev_addr, -- address of I2C device
* u32 waddr, -- address of chip register/memory
* u32 raddr, -- chip address to read back from
* u16 wdata, -- data to send
* u16 *rdata) -- data to receive back
*
* Write 16-bit data, then read back the original contents of that location.
* Requires long addressing format to be allowed.
*
* Before sending data, the data is converted to little endian. The
* data received back is converted back to the target platform's endianness.
*
* WARNING: This function is only guaranteed to work if there is one
* master on the I2C bus.
*
* Output:
* - 0 if reading was successful
* in that case: read back data is at *rdata
* - -EIO if anything went wrong
*
******************************/
static int drxdap_fasi_read_modify_write_reg16(struct i2c_device_addr *dev_addr,
u32 waddr,
u32 raddr,
u16 wdata, u16 *rdata)
{
int rc = -EIO;
#if (DRXDAPFASI_LONG_ADDR_ALLOWED == 1)
if (rdata == NULL)
return -EINVAL;
rc = drxdap_fasi_write_reg16(dev_addr, waddr, wdata, DRXDAP_FASI_RMW);
if (rc == 0)
rc = drxdap_fasi_read_reg16(dev_addr, raddr, rdata, 0);
#endif
return rc;
}
/*****************************
*
* int drxdap_fasi_write_reg32 (
* struct i2c_device_addr *dev_addr, -- address of I2C device
* u32 addr, -- address of chip register/memory
* u32 data, -- data to send
* u32 flags) -- special device flags
*
* Write one 32-bit register or memory location. The data being written is
* converted from the target platform's endianness to little endian.
*
* Output:
* - 0 if writing was successful
* - -EIO if anything went wrong
*
******************************/
static int drxdap_fasi_write_reg32(struct i2c_device_addr *dev_addr,
u32 addr,
u32 data, u32 flags)
{
u8 buf[sizeof(data)];
buf[0] = (u8) ((data >> 0) & 0xFF);
buf[1] = (u8) ((data >> 8) & 0xFF);
buf[2] = (u8) ((data >> 16) & 0xFF);
buf[3] = (u8) ((data >> 24) & 0xFF);
return drxdap_fasi_write_block(dev_addr, addr, sizeof(data), buf, flags);
}
/*============================================================================*/
/*
* \fn int drxj_dap_rm_write_reg16short
* \brief Read modify write 16 bits audio register using short format only.
* \param dev_addr
* \param waddr Address to write to
* \param raddr Address to read from (usually SIO_HI_RA_RAM_S0_RMWBUF__A)
* \param wdata Data to write
* \param rdata Buffer for data to read
* \return int
* \retval 0 Success
* \retval -EIO Timeout, I2C error, illegal bank
*
* 16 bits register read modify write access using short addressing format only.
* Requires knowledge of the registermap, thus device dependent.
* Using DAP FASI directly to avoid endless recursion of RMWs to audio registers.
*
*/
/* TODO correct define should be #if ( DRXDAPFASI_SHORT_ADDR_ALLOWED==1 )
See comments drxj_dap_read_modify_write_reg16 */
#if (DRXDAPFASI_LONG_ADDR_ALLOWED == 0)
static int drxj_dap_rm_write_reg16short(struct i2c_device_addr *dev_addr,
u32 waddr,
u32 raddr,
u16 wdata, u16 *rdata)
{
int rc;
if (rdata == NULL)
return -EINVAL;
/* Set RMW flag */
rc = drxdap_fasi_write_reg16(dev_addr,
SIO_HI_RA_RAM_S0_FLG_ACC__A,
SIO_HI_RA_RAM_S0_FLG_ACC_S0_RWM__M,
0x0000);
if (rc == 0) {
/* Write new data: triggers RMW */
rc = drxdap_fasi_write_reg16(dev_addr, waddr, wdata,
0x0000);
}
if (rc == 0) {
/* Read old data */
rc = drxdap_fasi_read_reg16(dev_addr, raddr, rdata,
0x0000);
}
if (rc == 0) {
/* Reset RMW flag */
rc = drxdap_fasi_write_reg16(dev_addr,
SIO_HI_RA_RAM_S0_FLG_ACC__A,
0, 0x0000);
}
return rc;
}
#endif
/*============================================================================*/
static int drxj_dap_read_modify_write_reg16(struct i2c_device_addr *dev_addr,
u32 waddr,
u32 raddr,
u16 wdata, u16 *rdata)
{
/* TODO: correct short/long addressing format decision,
now long format has higher prio then short because short also
needs virt bnks (not impl yet) for certain audio registers */
#if (DRXDAPFASI_LONG_ADDR_ALLOWED == 1)
return drxdap_fasi_read_modify_write_reg16(dev_addr,
waddr,
raddr, wdata, rdata);
#else
return drxj_dap_rm_write_reg16short(dev_addr, waddr, raddr, wdata, rdata);
#endif
}
/*============================================================================*/
/*
* \fn int drxj_dap_read_aud_reg16
* \brief Read 16 bits audio register
* \param dev_addr
* \param addr
* \param data
* \return int
* \retval 0 Success
* \retval -EIO Timeout, I2C error, illegal bank
*
* 16 bits register read access via audio token ring interface.
*
*/
static int drxj_dap_read_aud_reg16(struct i2c_device_addr *dev_addr,
u32 addr, u16 *data)
{
u32 start_timer = 0;
u32 current_timer = 0;
u32 delta_timer = 0;
u16 tr_status = 0;
int stat = -EIO;
/* No read possible for bank 3, return with error */
if (DRXDAP_FASI_ADDR2BANK(addr) == 3) {
stat = -EINVAL;
} else {
const u32 write_bit = ((dr_xaddr_t) 1) << 16;
/* Force reset write bit */
addr &= (~write_bit);
/* Set up read */
start_timer = jiffies_to_msecs(jiffies);
do {
/* RMW to aud TR IF until request is granted or timeout */
stat = drxj_dap_read_modify_write_reg16(dev_addr,
addr,
SIO_HI_RA_RAM_S0_RMWBUF__A,
0x0000, &tr_status);
if (stat != 0)
break;
current_timer = jiffies_to_msecs(jiffies);
delta_timer = current_timer - start_timer;
if (delta_timer > DRXJ_DAP_AUDTRIF_TIMEOUT) {
stat = -EIO;
break;
}
} while (((tr_status & AUD_TOP_TR_CTR_FIFO_LOCK__M) ==
AUD_TOP_TR_CTR_FIFO_LOCK_LOCKED) ||
((tr_status & AUD_TOP_TR_CTR_FIFO_FULL__M) ==
AUD_TOP_TR_CTR_FIFO_FULL_FULL));
} /* if ( DRXDAP_FASI_ADDR2BANK(addr)!=3 ) */
/* Wait for read ready status or timeout */
if (stat == 0) {
start_timer = jiffies_to_msecs(jiffies);
while ((tr_status & AUD_TOP_TR_CTR_FIFO_RD_RDY__M) !=
AUD_TOP_TR_CTR_FIFO_RD_RDY_READY) {
stat = drxj_dap_read_reg16(dev_addr,
AUD_TOP_TR_CTR__A,
&tr_status, 0x0000);
if (stat != 0)
break;
current_timer = jiffies_to_msecs(jiffies);
delta_timer = current_timer - start_timer;
if (delta_timer > DRXJ_DAP_AUDTRIF_TIMEOUT) {
stat = -EIO;
break;
}
} /* while ( ... ) */
}
/* Read value */
if (stat == 0)
stat = drxj_dap_read_modify_write_reg16(dev_addr,
AUD_TOP_TR_RD_REG__A,
SIO_HI_RA_RAM_S0_RMWBUF__A,
0x0000, data);
return stat;
}
/*============================================================================*/
static int drxj_dap_read_reg16(struct i2c_device_addr *dev_addr,
u32 addr,
u16 *data, u32 flags)
{
int stat = -EIO;
/* Check param */
if ((dev_addr == NULL) || (data == NULL))
return -EINVAL;
if (is_handled_by_aud_tr_if(addr))
stat = drxj_dap_read_aud_reg16(dev_addr, addr, data);
else
stat = drxdap_fasi_read_reg16(dev_addr, addr, data, flags);
return stat;
}
/*============================================================================*/
/*
* \fn int drxj_dap_write_aud_reg16
* \brief Write 16 bits audio register
* \param dev_addr
* \param addr
* \param data
* \return int
* \retval 0 Success
* \retval -EIO Timeout, I2C error, illegal bank
*
* 16 bits register write access via audio token ring interface.
*
*/
static int drxj_dap_write_aud_reg16(struct i2c_device_addr *dev_addr,
u32 addr, u16 data)
{
int stat = -EIO;
/* No write possible for bank 2, return with error */
if (DRXDAP_FASI_ADDR2BANK(addr) == 2) {
stat = -EINVAL;
} else {
u32 start_timer = 0;
u32 current_timer = 0;
u32 delta_timer = 0;
u16 tr_status = 0;
const u32 write_bit = ((dr_xaddr_t) 1) << 16;
/* Force write bit */
addr |= write_bit;
start_timer = jiffies_to_msecs(jiffies);
do {
/* RMW to aud TR IF until request is granted or timeout */
stat = drxj_dap_read_modify_write_reg16(dev_addr,
addr,
SIO_HI_RA_RAM_S0_RMWBUF__A,
data, &tr_status);
if (stat != 0)
break;
current_timer = jiffies_to_msecs(jiffies);
delta_timer = current_timer - start_timer;
if (delta_timer > DRXJ_DAP_AUDTRIF_TIMEOUT) {
stat = -EIO;
break;
}
} while (((tr_status & AUD_TOP_TR_CTR_FIFO_LOCK__M) ==
AUD_TOP_TR_CTR_FIFO_LOCK_LOCKED) ||
((tr_status & AUD_TOP_TR_CTR_FIFO_FULL__M) ==
AUD_TOP_TR_CTR_FIFO_FULL_FULL));
} /* if ( DRXDAP_FASI_ADDR2BANK(addr)!=2 ) */
return stat;
}
/*============================================================================*/
static int drxj_dap_write_reg16(struct i2c_device_addr *dev_addr,
u32 addr,
u16 data, u32 flags)
{
int stat = -EIO;
/* Check param */
if (dev_addr == NULL)
return -EINVAL;
if (is_handled_by_aud_tr_if(addr))
stat = drxj_dap_write_aud_reg16(dev_addr, addr, data);
else
stat = drxdap_fasi_write_reg16(dev_addr,
addr, data, flags);
return stat;
}
/*============================================================================*/
/* Free data ram in SIO HI */
#define SIO_HI_RA_RAM_USR_BEGIN__A 0x420040
#define SIO_HI_RA_RAM_USR_END__A 0x420060
#define DRXJ_HI_ATOMIC_BUF_START (SIO_HI_RA_RAM_USR_BEGIN__A)
#define DRXJ_HI_ATOMIC_BUF_END (SIO_HI_RA_RAM_USR_BEGIN__A + 7)
#define DRXJ_HI_ATOMIC_READ SIO_HI_RA_RAM_PAR_3_ACP_RW_READ
#define DRXJ_HI_ATOMIC_WRITE SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE
/*
* \fn int drxj_dap_atomic_read_write_block()
* \brief Basic access routine for atomic read or write access
* \param dev_addr pointer to i2c dev address
* \param addr destination/source address
* \param datasize size of data buffer in bytes
* \param data pointer to data buffer
* \return int
* \retval 0 Success
* \retval -EIO Timeout, I2C error, illegal bank
*
*/
static
int drxj_dap_atomic_read_write_block(struct i2c_device_addr *dev_addr,
u32 addr,
u16 datasize,
u8 *data, bool read_flag)
{
struct drxj_hi_cmd hi_cmd;
int rc;
u16 word;
u16 dummy = 0;
u16 i = 0;
/* Parameter check */
if (!data || !dev_addr || ((datasize % 2)) || ((datasize / 2) > 8))
return -EINVAL;
/* Set up HI parameters to read or write n bytes */
hi_cmd.cmd = SIO_HI_RA_RAM_CMD_ATOMIC_COPY;
hi_cmd.param1 =
(u16) ((DRXDAP_FASI_ADDR2BLOCK(DRXJ_HI_ATOMIC_BUF_START) << 6) +
DRXDAP_FASI_ADDR2BANK(DRXJ_HI_ATOMIC_BUF_START));
hi_cmd.param2 =
(u16) DRXDAP_FASI_ADDR2OFFSET(DRXJ_HI_ATOMIC_BUF_START);
hi_cmd.param3 = (u16) ((datasize / 2) - 1);
if (!read_flag)
hi_cmd.param3 |= DRXJ_HI_ATOMIC_WRITE;
else
hi_cmd.param3 |= DRXJ_HI_ATOMIC_READ;
hi_cmd.param4 = (u16) ((DRXDAP_FASI_ADDR2BLOCK(addr) << 6) +
DRXDAP_FASI_ADDR2BANK(addr));
hi_cmd.param5 = (u16) DRXDAP_FASI_ADDR2OFFSET(addr);
if (!read_flag) {
/* write data to buffer */
for (i = 0; i < (datasize / 2); i++) {
word = ((u16) data[2 * i]);
word += (((u16) data[(2 * i) + 1]) << 8);
drxj_dap_write_reg16(dev_addr,
(DRXJ_HI_ATOMIC_BUF_START + i),
word, 0);
}
}
rc = hi_command(dev_addr, &hi_cmd, &dummy);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
if (read_flag) {
/* read data from buffer */
for (i = 0; i < (datasize / 2); i++) {
rc = drxj_dap_read_reg16(dev_addr,
(DRXJ_HI_ATOMIC_BUF_START + i),
&word, 0);
if (rc) {
pr_err("error %d\n", rc);
goto rw_error;
}
data[2 * i] = (u8) (word & 0xFF);
data[(2 * i) + 1] = (u8) (word >> 8);
}
}
return 0;
rw_error:
return rc;
}
/*============================================================================*/
/*
* \fn int drxj_dap_atomic_read_reg32()
* \brief Atomic read of 32 bits words
*/
static
int drxj_dap_atomic_read_reg32(struct i2c_device_addr *dev_addr,
u32 addr,
u32 *data, u32 flags)
{
u8 buf[sizeof(*data)] = { 0 };
int rc;
u32 word = 0;
if (!data)
return -EINVAL;
rc = drxj_dap_atomic_read_write_block(dev_addr, addr,
sizeof(*data), buf, true);
if (rc < 0)
return 0;
word = (u32) buf[3];
word <<= 8;
word |= (u32) buf[2];
word <<= 8;
word |= (u32) buf[1];
word <<= 8;
word |= (u32) buf[0];
*data = word;
return rc;
}
/*============================================================================*/
/*============================================================================*/
/*== END DRXJ DAP FUNCTIONS ==*/
/*============================================================================*/
/*============================================================================*/
/*============================================================================*/
/*== HOST INTERFACE FUNCTIONS ==*/
/*============================================================================*/
/*============================================================================*/
/*
* \fn int hi_cfg_command()
* \brief Configure HI with settings stored in the demod structure.
* \param demod Demodulator.
* \return int.
*
* This routine was created because to much orthogonal settings have
* been put into one HI API function (configure). Especially the I2C bridge
* enable/disable should not need re-configuration of the HI.
*
*/
static int hi_cfg_command(const struct drx_demod_instance *demod)
{
struct drxj_data *ext_attr = (struct drxj_data *) (NULL);
struct drxj_hi_cmd hi_cmd;
u16 result = 0;
int rc;
ext_attr = (struct drxj_data *) demod->my_ext_attr;
hi_cmd.cmd = SIO_HI_RA_RAM_CMD_CONFIG;
hi_cmd.param1 = SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY;
hi_cmd.param2 = ext_attr->hi_cfg_timing_div;
hi_cmd.param3 = ext_attr->hi_cfg_bridge_delay;
hi_cmd.param4 = ext_attr->hi_cfg_wake_up_key;
hi_cmd.param5 = ext_attr->hi_cfg_ctrl;
hi_cmd.param6 = ext_attr->hi_cfg_transmit;
rc = hi_command(demod->my_i2c_dev_addr, &hi_cmd, &result);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
/* Reset power down flag (set one call only) */
ext_attr->hi_cfg_ctrl &= (~(SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ));
return 0;
rw_error:
return rc;
}
/*
* \fn int hi_command()
* \brief Configure HI with settings stored in the demod structure.
* \param dev_addr I2C address.
* \param cmd HI command.
* \param result HI command result.
* \return int.
*
* Sends command to HI
*
*/
static int
hi_command(struct i2c_device_addr *dev_addr, const struct drxj_hi_cmd *cmd, u16 *result)
{
u16 wait_cmd = 0;
u16 nr_retries = 0;
bool powerdown_cmd = false;
int rc;
/* Write parameters */
switch (cmd->cmd) {
case SIO_HI_RA_RAM_CMD_CONFIG:
case SIO_HI_RA_RAM_CMD_ATOMIC_COPY:
rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_6__A, cmd->param6, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_5__A, cmd->param5, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_4__A, cmd->param4, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_3__A, cmd->param3, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
fallthrough;
case SIO_HI_RA_RAM_CMD_BRDCTRL:
rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_2__A, cmd->param2, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_1__A, cmd->param1, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
fallthrough;
case SIO_HI_RA_RAM_CMD_NULL:
/* No parameters */
break;
default:
return -EINVAL;
}
/* Write command */
rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_CMD__A, cmd->cmd, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
if ((cmd->cmd) == SIO_HI_RA_RAM_CMD_RESET)
msleep(1);
/* Detect power down to omit reading result */
powerdown_cmd = (bool) ((cmd->cmd == SIO_HI_RA_RAM_CMD_CONFIG) &&
(((cmd->
param5) & SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M)
== SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ));
if (!powerdown_cmd) {
/* Wait until command rdy */
do {
nr_retries++;
if (nr_retries > DRXJ_MAX_RETRIES) {
pr_err("timeout\n");
goto rw_error;
}
rc = drxj_dap_read_reg16(dev_addr, SIO_HI_RA_RAM_CMD__A, &wait_cmd, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
} while (wait_cmd != 0);
/* Read result */
rc = drxj_dap_read_reg16(dev_addr, SIO_HI_RA_RAM_RES__A, result, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
}
/* if ( powerdown_cmd == true ) */
return 0;
rw_error:
return rc;
}
/*
* \fn int init_hi( const struct drx_demod_instance *demod )
* \brief Initialise and configurate HI.
* \param demod pointer to demod data.
* \return int Return status.
* \retval 0 Success.
* \retval -EIO Failure.
*
* Needs to know Psys (System Clock period) and Posc (Osc Clock period)
* Need to store configuration in driver because of the way I2C
* bridging is controlled.
*
*/
static int init_hi(const struct drx_demod_instance *demod)
{
struct drxj_data *ext_attr = (struct drxj_data *) (NULL);
struct drx_common_attr *common_attr = (struct drx_common_attr *) (NULL);
struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL);
int rc;
ext_attr = (struct drxj_data *) demod->my_ext_attr;
common_attr = (struct drx_common_attr *) demod->my_common_attr;
dev_addr = demod->my_i2c_dev_addr;
/* PATCH for bug 5003, HI ucode v3.1.0 */
rc = drxj_dap_write_reg16(dev_addr, 0x4301D7, 0x801, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
/* Timing div, 250ns/Psys */
/* Timing div, = ( delay (nano seconds) * sysclk (kHz) )/ 1000 */
ext_attr->hi_cfg_timing_div =
(u16) ((common_attr->sys_clock_freq / 1000) * HI_I2C_DELAY) / 1000;
/* Clipping */
if ((ext_attr->hi_cfg_timing_div) > SIO_HI_RA_RAM_PAR_2_CFG_DIV__M)
ext_attr->hi_cfg_timing_div = SIO_HI_RA_RAM_PAR_2_CFG_DIV__M;
/* Bridge delay, uses oscilator clock */
/* Delay = ( delay (nano seconds) * oscclk (kHz) )/ 1000 */
/* SDA brdige delay */
ext_attr->hi_cfg_bridge_delay =
(u16) ((common_attr->osc_clock_freq / 1000) * HI_I2C_BRIDGE_DELAY) /
1000;
/* Clipping */
if ((ext_attr->hi_cfg_bridge_delay) > SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M)
ext_attr->hi_cfg_bridge_delay = SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M;
/* SCL bridge delay, same as SDA for now */
ext_attr->hi_cfg_bridge_delay += ((ext_attr->hi_cfg_bridge_delay) <<
SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B);
/* Wakeup key, setting the read flag (as suggest in the documentation) does
not always result into a working solution (barebones worked VI2C failed).
Not setting the bit works in all cases . */
ext_attr->hi_cfg_wake_up_key = DRXJ_WAKE_UP_KEY;
/* port/bridge/power down ctrl */
ext_attr->hi_cfg_ctrl = (SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE);
/* transit mode time out delay and watch dog divider */
ext_attr->hi_cfg_transmit = SIO_HI_RA_RAM_PAR_6__PRE;
rc = hi_cfg_command(demod);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
return 0;
rw_error:
return rc;
}
/*============================================================================*/
/*== END HOST INTERFACE FUNCTIONS ==*/
/*============================================================================*/
/*============================================================================*/
/*============================================================================*/
/*== AUXILIARY FUNCTIONS ==*/
/*============================================================================*/
/*============================================================================*/
/*
* \fn int get_device_capabilities()
* \brief Get and store device capabilities.
* \param demod Pointer to demodulator instance.
* \return int.
* \return 0 Success
* \retval -EIO Failure
*
* Depending on pulldowns on MDx pins the following internals are set:
* * common_attr->osc_clock_freq
* * ext_attr->has_lna
* * ext_attr->has_ntsc
* * ext_attr->has_btsc
* * ext_attr->has_oob
*
*/
static int get_device_capabilities(struct drx_demod_instance *demod)
{
struct drx_common_attr *common_attr = (struct drx_common_attr *) (NULL);
struct drxj_data *ext_attr = (struct drxj_data *) NULL;
struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL);
u16 sio_pdr_ohw_cfg = 0;
u32 sio_top_jtagid_lo = 0;
u16 bid = 0;
int rc;
common_attr = (struct drx_common_attr *) demod->my_common_attr;
ext_attr = (struct drxj_data *) demod->my_ext_attr;
dev_addr = demod->my_i2c_dev_addr;
rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_read_reg16(dev_addr, SIO_PDR_OHW_CFG__A, &sio_pdr_ohw_cfg, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY__PRE, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
switch ((sio_pdr_ohw_cfg & SIO_PDR_OHW_CFG_FREF_SEL__M)) {
case 0:
/* ignore (bypass ?) */
break;
case 1:
/* 27 MHz */
common_attr->osc_clock_freq = 27000;
break;
case 2:
/* 20.25 MHz */
common_attr->osc_clock_freq = 20250;
break;
case 3:
/* 4 MHz */
common_attr->osc_clock_freq = 4000;
break;
default:
return -EIO;
}
/*
Determine device capabilities
Based on pinning v47
*/
rc = drxdap_fasi_read_reg32(dev_addr, SIO_TOP_JTAGID_LO__A, &sio_top_jtagid_lo, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
ext_attr->mfx = (u8) ((sio_top_jtagid_lo >> 29) & 0xF);
switch ((sio_top_jtagid_lo >> 12) & 0xFF) {
case 0x31:
rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_read_reg16(dev_addr, SIO_PDR_UIO_IN_HI__A, &bid, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
bid = (bid >> 10) & 0xf;
rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY__PRE, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
ext_attr->has_lna = true;
ext_attr->has_ntsc = false;
ext_attr->has_btsc = false;
ext_attr->has_oob = false;
ext_attr->has_smatx = true;
ext_attr->has_smarx = false;
ext_attr->has_gpio = false;
ext_attr->has_irqn = false;
break;
case 0x33:
ext_attr->has_lna = false;
ext_attr->has_ntsc = false;
ext_attr->has_btsc = false;
ext_attr->has_oob = false;
ext_attr->has_smatx = true;
ext_attr->has_smarx = false;
ext_attr->has_gpio = false;
ext_attr->has_irqn = false;
break;
case 0x45:
ext_attr->has_lna = true;
ext_attr->has_ntsc = true;
ext_attr->has_btsc = false;
ext_attr->has_oob = false;
ext_attr->has_smatx = true;
ext_attr->has_smarx = true;
ext_attr->has_gpio = true;
ext_attr->has_irqn = false;
break;
case 0x46:
ext_attr->has_lna = false;
ext_attr->has_ntsc = true;
ext_attr->has_btsc = false;
ext_attr->has_oob = false;
ext_attr->has_smatx = true;
ext_attr->has_smarx = true;
ext_attr->has_gpio = true;
ext_attr->has_irqn = false;
break;
case 0x41:
ext_attr->has_lna = true;
ext_attr->has_ntsc = true;
ext_attr->has_btsc = true;
ext_attr->has_oob = false;
ext_attr->has_smatx = true;
ext_attr->has_smarx = true;
ext_attr->has_gpio = true;
ext_attr->has_irqn = false;
break;
case 0x43:
ext_attr->has_lna = false;
ext_attr->has_ntsc = true;
ext_attr->has_btsc = true;
ext_attr->has_oob = false;
ext_attr->has_smatx = true;
ext_attr->has_smarx = true;
ext_attr->has_gpio = true;
ext_attr->has_irqn = false;
break;
case 0x32:
ext_attr->has_lna = true;
ext_attr->has_ntsc = false;
ext_attr->has_btsc = false;
ext_attr->has_oob = true;
ext_attr->has_smatx = true;
ext_attr->has_smarx = true;
ext_attr->has_gpio = true;
ext_attr->has_irqn = true;
break;
case 0x34:
ext_attr->has_lna = false;
ext_attr->has_ntsc = true;
ext_attr->has_btsc = true;
ext_attr->has_oob = true;
ext_attr->has_smatx = true;
ext_attr->has_smarx = true;
ext_attr->has_gpio = true;
ext_attr->has_irqn = true;
break;
case 0x42:
ext_attr->has_lna = true;
ext_attr->has_ntsc = true;
ext_attr->has_btsc = true;
ext_attr->has_oob = true;
ext_attr->has_smatx = true;
ext_attr->has_smarx = true;
ext_attr->has_gpio = true;
ext_attr->has_irqn = true;
break;
case 0x44:
ext_attr->has_lna = false;
ext_attr->has_ntsc = true;
ext_attr->has_btsc = true;
ext_attr->has_oob = true;
ext_attr->has_smatx = true;
ext_attr->has_smarx = true;
ext_attr->has_gpio = true;
ext_attr->has_irqn = true;
break;
default:
/* Unknown device variant */
return -EIO;
break;
}
return 0;
rw_error:
return rc;
}
/*
* \fn int power_up_device()
* \brief Power up device.
* \param demod Pointer to demodulator instance.
* \return int.
* \return 0 Success
* \retval -EIO Failure, I2C or max retries reached
*
*/
#ifndef DRXJ_MAX_RETRIES_POWERUP
#define DRXJ_MAX_RETRIES_POWERUP 10
#endif
static int power_up_device(struct drx_demod_instance *demod)
{
struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL);
u8 data = 0;
u16 retry_count = 0;
struct i2c_device_addr wake_up_addr;
dev_addr = demod->my_i2c_dev_addr;
wake_up_addr.i2c_addr = DRXJ_WAKE_UP_KEY;
wake_up_addr.i2c_dev_id = dev_addr->i2c_dev_id;
wake_up_addr.user_data = dev_addr->user_data;
/*
* I2C access may fail in this case: no ack
* dummy write must be used to wake uop device, dummy read must be used to
* reset HI state machine (avoiding actual writes)
*/
do {
data = 0;
drxbsp_i2c_write_read(&wake_up_addr, 1, &data,
(struct i2c_device_addr *)(NULL), 0,
(u8 *)(NULL));
msleep(10);
retry_count++;
} while ((drxbsp_i2c_write_read
((struct i2c_device_addr *) (NULL), 0, (u8 *)(NULL), dev_addr, 1,
&data)
!= 0) && (retry_count < DRXJ_MAX_RETRIES_POWERUP));
/* Need some recovery time .... */
msleep(10);
if (retry_count == DRXJ_MAX_RETRIES_POWERUP)
return -EIO;
return 0;
}
/*----------------------------------------------------------------------------*/
/* MPEG Output Configuration Functions - begin */
/*----------------------------------------------------------------------------*/
/*
* \fn int ctrl_set_cfg_mpeg_output()
* \brief Set MPEG output configuration of the device.
* \param devmod Pointer to demodulator instance.
* \param cfg_data Pointer to mpeg output configuaration.
* \return int.
*
* Configure MPEG output parameters.
*
*/
static int
ctrl_set_cfg_mpeg_output(struct drx_demod_instance *demod, struct drx_cfg_mpeg_output *cfg_data)
{
struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL);
struct drxj_data *ext_attr = (struct drxj_data *) (NULL);
struct drx_common_attr *common_attr = (struct drx_common_attr *) (NULL);
int rc;
u16 fec_oc_reg_mode = 0;
u16 fec_oc_reg_ipr_mode = 0;
u16 fec_oc_reg_ipr_invert = 0;
u32 max_bit_rate = 0;
u32 rcn_rate = 0;
u32 nr_bits = 0;
u16 sio_pdr_md_cfg = 0;
/* data mask for the output data byte */
u16 invert_data_mask =
FEC_OC_IPR_INVERT_MD7__M | FEC_OC_IPR_INVERT_MD6__M |
FEC_OC_IPR_INVERT_MD5__M | FEC_OC_IPR_INVERT_MD4__M |
FEC_OC_IPR_INVERT_MD3__M | FEC_OC_IPR_INVERT_MD2__M |
FEC_OC_IPR_INVERT_MD1__M | FEC_OC_IPR_INVERT_MD0__M;
/* check arguments */
if ((demod == NULL) || (cfg_data == NULL))
return -EINVAL;
dev_addr = demod->my_i2c_dev_addr;
ext_attr = (struct drxj_data *) demod->my_ext_attr;
common_attr = (struct drx_common_attr *) demod->my_common_attr;
if (cfg_data->enable_mpeg_output == true) {
/* quick and dirty patch to set MPEG in case current std is not
producing MPEG */
switch (ext_attr->standard) {
case DRX_STANDARD_8VSB:
case DRX_STANDARD_ITU_A:
case DRX_STANDARD_ITU_B:
case DRX_STANDARD_ITU_C:
break;
default:
return 0;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_OCR_INVERT__A, 0, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
switch (ext_attr->standard) {
case DRX_STANDARD_8VSB:
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_FCT_USAGE__A, 7, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
} /* 2048 bytes fifo ram */
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_TMD_CTL_UPD_RATE__A, 10, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_TMD_INT_UPD_RATE__A, 10, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_AVR_PARM_A__A, 5, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_AVR_PARM_B__A, 7, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_RCN_GAIN__A, 10, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
/* Low Water Mark for synchronization */
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_LWM__A, 3, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
/* High Water Mark for synchronization */
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_HWM__A, 5, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
break;
case DRX_STANDARD_ITU_A:
case DRX_STANDARD_ITU_C:
switch (ext_attr->constellation) {
case DRX_CONSTELLATION_QAM256:
nr_bits = 8;
break;
case DRX_CONSTELLATION_QAM128:
nr_bits = 7;
break;
case DRX_CONSTELLATION_QAM64:
nr_bits = 6;
break;
case DRX_CONSTELLATION_QAM32:
nr_bits = 5;
break;
case DRX_CONSTELLATION_QAM16:
nr_bits = 4;
break;
default:
return -EIO;
} /* ext_attr->constellation */
/* max_bit_rate = symbol_rate * nr_bits * coef */
/* coef = 188/204 */
max_bit_rate =
(ext_attr->curr_symbol_rate / 8) * nr_bits * 188;
fallthrough; /* as b/c Annex A/C need following settings */
case DRX_STANDARD_ITU_B:
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_FCT_USAGE__A, FEC_OC_FCT_USAGE__PRE, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_TMD_CTL_UPD_RATE__A, FEC_OC_TMD_CTL_UPD_RATE__PRE, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_TMD_INT_UPD_RATE__A, 5, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_AVR_PARM_A__A, FEC_OC_AVR_PARM_A__PRE, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_AVR_PARM_B__A, FEC_OC_AVR_PARM_B__PRE, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
if (cfg_data->static_clk == true) {
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_RCN_GAIN__A, 0xD, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
} else {
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_RCN_GAIN__A, FEC_OC_RCN_GAIN__PRE, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_LWM__A, 2, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_HWM__A, 12, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
break;
default:
break;
} /* switch (standard) */
/* Check insertion of the Reed-Solomon parity bytes */
rc = drxj_dap_read_reg16(dev_addr, FEC_OC_MODE__A, &fec_oc_reg_mode, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_read_reg16(dev_addr, FEC_OC_IPR_MODE__A, &fec_oc_reg_ipr_mode, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
if (cfg_data->insert_rs_byte == true) {
/* enable parity symbol forward */
fec_oc_reg_mode |= FEC_OC_MODE_PARITY__M;
/* MVAL disable during parity bytes */
fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_MVAL_DIS_PAR__M;
switch (ext_attr->standard) {
case DRX_STANDARD_8VSB:
rcn_rate = 0x004854D3;
break;
case DRX_STANDARD_ITU_B:
fec_oc_reg_mode |= FEC_OC_MODE_TRANSPARENT__M;
switch (ext_attr->constellation) {
case DRX_CONSTELLATION_QAM256:
rcn_rate = 0x008945E7;
break;
case DRX_CONSTELLATION_QAM64:
rcn_rate = 0x005F64D4;
break;
default:
return -EIO;
}
break;
case DRX_STANDARD_ITU_A:
case DRX_STANDARD_ITU_C:
/* insert_rs_byte = true -> coef = 188/188 -> 1, RS bits are in MPEG output */
rcn_rate =
(frac28
(max_bit_rate,
(u32) (common_attr->sys_clock_freq / 8))) /
188;
break;
default:
return -EIO;
} /* ext_attr->standard */
} else { /* insert_rs_byte == false */
/* disable parity symbol forward */
fec_oc_reg_mode &= (~FEC_OC_MODE_PARITY__M);
/* MVAL enable during parity bytes */
fec_oc_reg_ipr_mode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M);
switch (ext_attr->standard) {
case DRX_STANDARD_8VSB:
rcn_rate = 0x0041605C;
break;
case DRX_STANDARD_ITU_B:
fec_oc_reg_mode &= (~FEC_OC_MODE_TRANSPARENT__M);
switch (ext_attr->constellation) {
case DRX_CONSTELLATION_QAM256:
rcn_rate = 0x0082D6A0;
break;
case DRX_CONSTELLATION_QAM64:
rcn_rate = 0x005AEC1A;
break;
default:
return -EIO;
}
break;
case DRX_STANDARD_ITU_A:
case DRX_STANDARD_ITU_C:
/* insert_rs_byte = false -> coef = 188/204, RS bits not in MPEG output */
rcn_rate =
(frac28
(max_bit_rate,
(u32) (common_attr->sys_clock_freq / 8))) /
204;
break;
default:
return -EIO;
} /* ext_attr->standard */
}
if (cfg_data->enable_parallel == true) { /* MPEG data output is parallel -> clear ipr_mode[0] */
fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M));
} else { /* MPEG data output is serial -> set ipr_mode[0] */
fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_SERIAL__M;
}
/* Control slective inversion of output bits */
if (cfg_data->invert_data == true)
fec_oc_reg_ipr_invert |= invert_data_mask;
else
fec_oc_reg_ipr_invert &= (~(invert_data_mask));
if (cfg_data->invert_err == true)
fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MERR__M;
else
fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MERR__M));
if (cfg_data->invert_str == true)
fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MSTRT__M;
else
fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MSTRT__M));
if (cfg_data->invert_val == true)
fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MVAL__M;
else
fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MVAL__M));
if (cfg_data->invert_clk == true)
fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MCLK__M;
else
fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MCLK__M));
if (cfg_data->static_clk == true) { /* Static mode */
u32 dto_rate = 0;
u32 bit_rate = 0;
u16 fec_oc_dto_burst_len = 0;
u16 fec_oc_dto_period = 0;
fec_oc_dto_burst_len = FEC_OC_DTO_BURST_LEN__PRE;
switch (ext_attr->standard) {
case DRX_STANDARD_8VSB:
fec_oc_dto_period = 4;
if (cfg_data->insert_rs_byte == true)
fec_oc_dto_burst_len = 208;
break;
case DRX_STANDARD_ITU_A:
{
u32 symbol_rate_th = 6400000;
if (cfg_data->insert_rs_byte == true) {
fec_oc_dto_burst_len = 204;
symbol_rate_th = 5900000;
}
if (ext_attr->curr_symbol_rate >=
symbol_rate_th) {
fec_oc_dto_period = 0;
} else {
fec_oc_dto_period = 1;
}
}
break;
case DRX_STANDARD_ITU_B:
fec_oc_dto_period = 1;
if (cfg_data->insert_rs_byte == true)
fec_oc_dto_burst_len = 128;
break;
case DRX_STANDARD_ITU_C:
fec_oc_dto_period = 1;
if (cfg_data->insert_rs_byte == true)
fec_oc_dto_burst_len = 204;
break;
default:
return -EIO;
}
bit_rate =
common_attr->sys_clock_freq * 1000 / (fec_oc_dto_period +
2);
dto_rate =
frac28(bit_rate, common_attr->sys_clock_freq * 1000);
dto_rate >>= 3;
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_RATE_HI__A, (u16)((dto_rate >> 16) & FEC_OC_DTO_RATE_HI__M), 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_RATE_LO__A, (u16)(dto_rate & FEC_OC_DTO_RATE_LO_RATE_LO__M), 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_MODE__A, FEC_OC_DTO_MODE_DYNAMIC__M | FEC_OC_DTO_MODE_OFFSET_ENABLE__M, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_FCT_MODE__A, FEC_OC_FCT_MODE_RAT_ENA__M | FEC_OC_FCT_MODE_VIRT_ENA__M, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_BURST_LEN__A, fec_oc_dto_burst_len, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
if (ext_attr->mpeg_output_clock_rate != DRXJ_MPEGOUTPUT_CLOCK_RATE_AUTO)
fec_oc_dto_period = ext_attr->mpeg_output_clock_rate - 1;
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_PERIOD__A, fec_oc_dto_period, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
} else { /* Dynamic mode */
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_MODE__A, FEC_OC_DTO_MODE_DYNAMIC__M, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_FCT_MODE__A, 0, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
}
rc = drxdap_fasi_write_reg32(dev_addr, FEC_OC_RCN_CTL_RATE_LO__A, rcn_rate, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
/* Write appropriate registers with requested configuration */
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_MODE__A, fec_oc_reg_mode, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_IPR_MODE__A, fec_oc_reg_ipr_mode, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_IPR_INVERT__A, fec_oc_reg_ipr_invert, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
/* enabling for both parallel and serial now */
/* Write magic word to enable pdr reg write */
rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, 0xFABA, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
/* Set MPEG TS pads to outputmode */
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MSTRT_CFG__A, 0x0013, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MERR_CFG__A, 0x0013, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MCLK_CFG__A, MPEG_OUTPUT_CLK_DRIVE_STRENGTH << SIO_PDR_MCLK_CFG_DRIVE__B | 0x03 << SIO_PDR_MCLK_CFG_MODE__B, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MVAL_CFG__A, 0x0013, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
sio_pdr_md_cfg =
MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH <<
SIO_PDR_MD0_CFG_DRIVE__B | 0x03 << SIO_PDR_MD0_CFG_MODE__B;
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD0_CFG__A, sio_pdr_md_cfg, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
if (cfg_data->enable_parallel == true) { /* MPEG data output is parallel -> set MD1 to MD7 to output mode */
sio_pdr_md_cfg =
MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH <<
SIO_PDR_MD0_CFG_DRIVE__B | 0x03 <<
SIO_PDR_MD0_CFG_MODE__B;
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD0_CFG__A, sio_pdr_md_cfg, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD1_CFG__A, sio_pdr_md_cfg, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD2_CFG__A, sio_pdr_md_cfg, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD3_CFG__A, sio_pdr_md_cfg, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD4_CFG__A, sio_pdr_md_cfg, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD5_CFG__A, sio_pdr_md_cfg, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD6_CFG__A, sio_pdr_md_cfg, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD7_CFG__A, sio_pdr_md_cfg, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
} else { /* MPEG data output is serial -> set MD1 to MD7 to tri-state */
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD1_CFG__A, 0x0000, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD2_CFG__A, 0x0000, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD3_CFG__A, 0x0000, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD4_CFG__A, 0x0000, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD5_CFG__A, 0x0000, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
}
rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD6_CFG__A, 0x0000, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;