| // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| /dts-v1/; |
| |
| #include "mt7621.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| compatible = "gnubee,gb-pc2", "mediatek,mt7621-soc"; |
| model = "GB-PC2"; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x00000000 0x1c000000>, |
| <0x20000000 0x04000000>; |
| }; |
| |
| chosen { |
| bootargs = "console=ttyS0,57600"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| key-reset { |
| label = "reset"; |
| gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; |
| linux,code = <KEY_RESTART>; |
| }; |
| }; |
| |
| gpio-leds { |
| compatible = "gpio-leds"; |
| |
| led-ethblack-green { |
| label = "green:ethblack"; |
| gpios = <&gpio 3 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-ethblue-green { |
| label = "green:ethblue"; |
| gpios = <&gpio 4 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-ethyellow-green { |
| label = "green:ethyellow"; |
| gpios = <&gpio 15 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-ethyellow-orange { |
| label = "orange:ethyellow"; |
| gpios = <&gpio 13 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-power { |
| label = "green:power"; |
| gpios = <&gpio 6 GPIO_ACTIVE_LOW>; |
| linux,default-trigger = "default-on"; |
| }; |
| |
| led-system { |
| label = "green:system"; |
| gpios = <&gpio 8 GPIO_ACTIVE_LOW>; |
| linux,default-trigger = "disk-activity"; |
| }; |
| }; |
| }; |
| |
| &mmc { |
| status = "okay"; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| |
| flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <50000000>; |
| broken-flash-reset; |
| |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x10000>; |
| read-only; |
| }; |
| |
| factory: partition@40000 { |
| label = "factory"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| |
| partition@50000 { |
| label = "firmware"; |
| reg = <0x50000 0x1fb0000>; |
| }; |
| }; |
| }; |
| |
| &pcie { |
| status = "okay"; |
| }; |
| |
| &gmac1 { |
| phy-mode = "rgmii-rxid"; |
| phy-handle = <ðphy5>; |
| |
| fixed-link { |
| status = "disabled"; |
| }; |
| }; |
| |
| &mdio { |
| ethphy5: ethernet-phy@5 { |
| reg = <5>; |
| }; |
| }; |
| |
| &switch0 { |
| ports { |
| port@0 { |
| status = "okay"; |
| label = "ethblack"; |
| }; |
| |
| port@4 { |
| status = "okay"; |
| label = "ethblue"; |
| }; |
| |
| port@5 { |
| status = "disabled"; |
| }; |
| }; |
| }; |