| /* |
| * Procedures for interfacing to Open Firmware. |
| * |
| * Peter Bergner, IBM Corp. June 2001. |
| * Copyright (C) 2001 Peter Bergner. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <asm/types.h> |
| #include <asm/page.h> |
| #include <asm/prom.h> |
| #include <asm/lmb.h> |
| #include <asm/abs_addr.h> |
| |
| struct lmb lmb; |
| |
| #undef DEBUG |
| |
| void lmb_dump_all(void) |
| { |
| #ifdef DEBUG |
| unsigned long i; |
| |
| udbg_printf("lmb_dump_all:\n"); |
| udbg_printf(" memory.cnt = 0x%lx\n", |
| lmb.memory.cnt); |
| udbg_printf(" memory.size = 0x%lx\n", |
| lmb.memory.size); |
| for (i=0; i < lmb.memory.cnt ;i++) { |
| udbg_printf(" memory.region[0x%x].base = 0x%lx\n", |
| i, lmb.memory.region[i].base); |
| udbg_printf(" .size = 0x%lx\n", |
| lmb.memory.region[i].size); |
| } |
| |
| udbg_printf("\n reserved.cnt = 0x%lx\n", |
| lmb.reserved.cnt); |
| udbg_printf(" reserved.size = 0x%lx\n", |
| lmb.reserved.size); |
| for (i=0; i < lmb.reserved.cnt ;i++) { |
| udbg_printf(" reserved.region[0x%x].base = 0x%lx\n", |
| i, lmb.reserved.region[i].base); |
| udbg_printf(" .size = 0x%lx\n", |
| lmb.reserved.region[i].size); |
| } |
| #endif /* DEBUG */ |
| } |
| |
| static unsigned long __init |
| lmb_addrs_overlap(unsigned long base1, unsigned long size1, |
| unsigned long base2, unsigned long size2) |
| { |
| return ((base1 < (base2+size2)) && (base2 < (base1+size1))); |
| } |
| |
| static long __init |
| lmb_addrs_adjacent(unsigned long base1, unsigned long size1, |
| unsigned long base2, unsigned long size2) |
| { |
| if (base2 == base1 + size1) |
| return 1; |
| else if (base1 == base2 + size2) |
| return -1; |
| |
| return 0; |
| } |
| |
| static long __init |
| lmb_regions_adjacent(struct lmb_region *rgn, unsigned long r1, unsigned long r2) |
| { |
| unsigned long base1 = rgn->region[r1].base; |
| unsigned long size1 = rgn->region[r1].size; |
| unsigned long base2 = rgn->region[r2].base; |
| unsigned long size2 = rgn->region[r2].size; |
| |
| return lmb_addrs_adjacent(base1, size1, base2, size2); |
| } |
| |
| /* Assumption: base addr of region 1 < base addr of region 2 */ |
| static void __init |
| lmb_coalesce_regions(struct lmb_region *rgn, unsigned long r1, unsigned long r2) |
| { |
| unsigned long i; |
| |
| rgn->region[r1].size += rgn->region[r2].size; |
| for (i=r2; i < rgn->cnt-1; i++) { |
| rgn->region[i].base = rgn->region[i+1].base; |
| rgn->region[i].size = rgn->region[i+1].size; |
| } |
| rgn->cnt--; |
| } |
| |
| /* This routine called with relocation disabled. */ |
| void __init |
| lmb_init(void) |
| { |
| /* Create a dummy zero size LMB which will get coalesced away later. |
| * This simplifies the lmb_add() code below... |
| */ |
| lmb.memory.region[0].base = 0; |
| lmb.memory.region[0].size = 0; |
| lmb.memory.cnt = 1; |
| |
| /* Ditto. */ |
| lmb.reserved.region[0].base = 0; |
| lmb.reserved.region[0].size = 0; |
| lmb.reserved.cnt = 1; |
| } |
| |
| /* This routine called with relocation disabled. */ |
| void __init |
| lmb_analyze(void) |
| { |
| int i; |
| |
| lmb.memory.size = 0; |
| |
| for (i = 0; i < lmb.memory.cnt; i++) |
| lmb.memory.size += lmb.memory.region[i].size; |
| } |
| |
| /* This routine called with relocation disabled. */ |
| static long __init |
| lmb_add_region(struct lmb_region *rgn, unsigned long base, unsigned long size) |
| { |
| unsigned long i, coalesced = 0; |
| long adjacent; |
| |
| /* First try and coalesce this LMB with another. */ |
| for (i=0; i < rgn->cnt; i++) { |
| unsigned long rgnbase = rgn->region[i].base; |
| unsigned long rgnsize = rgn->region[i].size; |
| |
| adjacent = lmb_addrs_adjacent(base,size,rgnbase,rgnsize); |
| if ( adjacent > 0 ) { |
| rgn->region[i].base -= size; |
| rgn->region[i].size += size; |
| coalesced++; |
| break; |
| } |
| else if ( adjacent < 0 ) { |
| rgn->region[i].size += size; |
| coalesced++; |
| break; |
| } |
| } |
| |
| if ((i < rgn->cnt-1) && lmb_regions_adjacent(rgn, i, i+1) ) { |
| lmb_coalesce_regions(rgn, i, i+1); |
| coalesced++; |
| } |
| |
| if ( coalesced ) { |
| return coalesced; |
| } else if ( rgn->cnt >= MAX_LMB_REGIONS ) { |
| return -1; |
| } |
| |
| /* Couldn't coalesce the LMB, so add it to the sorted table. */ |
| for (i=rgn->cnt-1; i >= 0; i--) { |
| if (base < rgn->region[i].base) { |
| rgn->region[i+1].base = rgn->region[i].base; |
| rgn->region[i+1].size = rgn->region[i].size; |
| } else { |
| rgn->region[i+1].base = base; |
| rgn->region[i+1].size = size; |
| break; |
| } |
| } |
| rgn->cnt++; |
| |
| return 0; |
| } |
| |
| /* This routine called with relocation disabled. */ |
| long __init |
| lmb_add(unsigned long base, unsigned long size) |
| { |
| struct lmb_region *_rgn = &(lmb.memory); |
| |
| /* On pSeries LPAR systems, the first LMB is our RMO region. */ |
| if ( base == 0 ) |
| lmb.rmo_size = size; |
| |
| return lmb_add_region(_rgn, base, size); |
| |
| } |
| |
| long __init |
| lmb_reserve(unsigned long base, unsigned long size) |
| { |
| struct lmb_region *_rgn = &(lmb.reserved); |
| |
| return lmb_add_region(_rgn, base, size); |
| } |
| |
| long __init |
| lmb_overlaps_region(struct lmb_region *rgn, unsigned long base, unsigned long size) |
| { |
| unsigned long i; |
| |
| for (i=0; i < rgn->cnt; i++) { |
| unsigned long rgnbase = rgn->region[i].base; |
| unsigned long rgnsize = rgn->region[i].size; |
| if ( lmb_addrs_overlap(base,size,rgnbase,rgnsize) ) { |
| break; |
| } |
| } |
| |
| return (i < rgn->cnt) ? i : -1; |
| } |
| |
| unsigned long __init |
| lmb_alloc(unsigned long size, unsigned long align) |
| { |
| return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE); |
| } |
| |
| unsigned long __init |
| lmb_alloc_base(unsigned long size, unsigned long align, unsigned long max_addr) |
| { |
| long i, j; |
| unsigned long base = 0; |
| |
| for (i=lmb.memory.cnt-1; i >= 0; i--) { |
| unsigned long lmbbase = lmb.memory.region[i].base; |
| unsigned long lmbsize = lmb.memory.region[i].size; |
| |
| if ( max_addr == LMB_ALLOC_ANYWHERE ) |
| base = _ALIGN_DOWN(lmbbase+lmbsize-size, align); |
| else if ( lmbbase < max_addr ) |
| base = _ALIGN_DOWN(min(lmbbase+lmbsize,max_addr)-size, align); |
| else |
| continue; |
| |
| while ( (lmbbase <= base) && |
| ((j = lmb_overlaps_region(&lmb.reserved,base,size)) >= 0) ) { |
| base = _ALIGN_DOWN(lmb.reserved.region[j].base-size, align); |
| } |
| |
| if ( (base != 0) && (lmbbase <= base) ) |
| break; |
| } |
| |
| if ( i < 0 ) |
| return 0; |
| |
| lmb_add_region(&lmb.reserved, base, size); |
| |
| return base; |
| } |
| |
| /* You must call lmb_analyze() before this. */ |
| unsigned long __init |
| lmb_phys_mem_size(void) |
| { |
| return lmb.memory.size; |
| } |
| |
| unsigned long __init |
| lmb_end_of_DRAM(void) |
| { |
| int idx = lmb.memory.cnt - 1; |
| |
| return (lmb.memory.region[idx].base + lmb.memory.region[idx].size); |
| } |
| |
| /* |
| * Truncate the lmb list to memory_limit if it's set |
| * You must call lmb_analyze() after this. |
| */ |
| void __init lmb_enforce_memory_limit(void) |
| { |
| extern unsigned long memory_limit; |
| unsigned long i, limit; |
| |
| if (! memory_limit) |
| return; |
| |
| limit = memory_limit; |
| for (i = 0; i < lmb.memory.cnt; i++) { |
| if (limit > lmb.memory.region[i].size) { |
| limit -= lmb.memory.region[i].size; |
| continue; |
| } |
| |
| lmb.memory.region[i].size = limit; |
| lmb.memory.cnt = i + 1; |
| break; |
| } |
| } |