| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <linux/bits.h> |
| #include <linux/bitfield.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/tlv.h> |
| |
| #define RT9120_REG_DEVID 0x00 |
| #define RT9120_REG_I2SFMT 0x02 |
| #define RT9120_REG_I2SWL 0x03 |
| #define RT9120_REG_SDIOSEL 0x04 |
| #define RT9120_REG_SYSCTL 0x05 |
| #define RT9120_REG_SPKGAIN 0x07 |
| #define RT9120_REG_VOLRAMP 0x0A |
| #define RT9120_REG_ERRRPT 0x10 |
| #define RT9120_REG_MSVOL 0x20 |
| #define RT9120_REG_SWRESET 0x40 |
| #define RT9120_REG_INTERCFG 0x63 |
| #define RT9120_REG_INTERNAL0 0x65 |
| #define RT9120_REG_INTERNAL1 0x69 |
| #define RT9120_REG_UVPOPT 0x6C |
| #define RT9120_REG_DIGCFG 0xF8 |
| |
| #define RT9120_VID_MASK GENMASK(15, 8) |
| #define RT9120_SWRST_MASK BIT(7) |
| #define RT9120_MUTE_MASK GENMASK(5, 4) |
| #define RT9120_I2SFMT_MASK GENMASK(4, 2) |
| #define RT9120_I2SFMT_SHIFT 2 |
| #define RT9120_CFG_FMT_I2S 0 |
| #define RT9120_CFG_FMT_LEFTJ 1 |
| #define RT9120_CFG_FMT_RIGHTJ 2 |
| #define RT9120_CFG_FMT_DSPA 3 |
| #define RT9120_CFG_FMT_DSPB 7 |
| #define RT9120_AUDBIT_MASK GENMASK(1, 0) |
| #define RT9120_CFG_AUDBIT_16 0 |
| #define RT9120_CFG_AUDBIT_20 1 |
| #define RT9120_CFG_AUDBIT_24 2 |
| #define RT9120_AUDWL_MASK GENMASK(5, 0) |
| #define RT9120_CFG_WORDLEN_16 16 |
| #define RT9120_CFG_WORDLEN_24 24 |
| #define RT9120_CFG_WORDLEN_32 32 |
| #define RT9120_DVDD_UVSEL_MASK GENMASK(5, 4) |
| #define RT9120_AUTOSYNC_MASK BIT(6) |
| |
| #define RT9120_VENDOR_ID 0x42 |
| #define RT9120S_VENDOR_ID 0x43 |
| #define RT9120_RESET_WAITMS 20 |
| #define RT9120_CHIPON_WAITMS 20 |
| #define RT9120_AMPON_WAITMS 50 |
| #define RT9120_AMPOFF_WAITMS 100 |
| #define RT9120_LVAPP_THRESUV 2000000 |
| |
| /* 8000 to 192000 supported , only 176400 not support */ |
| #define RT9120_RATES_MASK (SNDRV_PCM_RATE_8000_192000 &\ |
| ~SNDRV_PCM_RATE_176400) |
| #define RT9120_FMTS_MASK (SNDRV_PCM_FMTBIT_S16_LE |\ |
| SNDRV_PCM_FMTBIT_S24_LE |\ |
| SNDRV_PCM_FMTBIT_S32_LE) |
| |
| enum { |
| CHIP_IDX_RT9120 = 0, |
| CHIP_IDX_RT9120S, |
| CHIP_IDX_MAX |
| }; |
| |
| struct rt9120_data { |
| struct device *dev; |
| struct regmap *regmap; |
| int chip_idx; |
| }; |
| |
| /* 11bit [min,max,step] = [-103.9375dB, 24dB, 0.0625dB] */ |
| static const DECLARE_TLV_DB_SCALE(digital_tlv, -1039375, 625, 1); |
| |
| /* {6, 8, 10, 12, 13, 14, 15, 16}dB */ |
| static const DECLARE_TLV_DB_RANGE(classd_tlv, |
| 0, 3, TLV_DB_SCALE_ITEM(600, 200, 0), |
| 4, 7, TLV_DB_SCALE_ITEM(1300, 100, 0) |
| ); |
| |
| static const char * const sdo_select_text[] = { |
| "None", "INTF", "Final", "RMS Detect" |
| }; |
| |
| static const struct soc_enum sdo_select_enum = |
| SOC_ENUM_SINGLE(RT9120_REG_SDIOSEL, 4, ARRAY_SIZE(sdo_select_text), |
| sdo_select_text); |
| |
| static const struct snd_kcontrol_new rt9120_snd_controls[] = { |
| SOC_SINGLE_TLV("MS Volume", RT9120_REG_MSVOL, 0, 2047, 1, digital_tlv), |
| SOC_SINGLE_TLV("SPK Gain Volume", RT9120_REG_SPKGAIN, 0, 7, 0, classd_tlv), |
| SOC_SINGLE("PBTL Switch", RT9120_REG_SYSCTL, 3, 1, 0), |
| SOC_ENUM("SDO Select", sdo_select_enum), |
| }; |
| |
| static int internal_power_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| struct snd_soc_component *comp = snd_soc_dapm_to_component(w->dapm); |
| |
| switch (event) { |
| case SND_SOC_DAPM_PRE_PMU: |
| snd_soc_component_write(comp, RT9120_REG_ERRRPT, 0); |
| break; |
| case SND_SOC_DAPM_POST_PMU: |
| msleep(RT9120_AMPON_WAITMS); |
| break; |
| case SND_SOC_DAPM_POST_PMD: |
| msleep(RT9120_AMPOFF_WAITMS); |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget rt9120_dapm_widgets[] = { |
| SND_SOC_DAPM_MIXER("DMIX", SND_SOC_NOPM, 0, 0, NULL, 0), |
| SND_SOC_DAPM_DAC("LDAC", NULL, SND_SOC_NOPM, 0, 0), |
| SND_SOC_DAPM_DAC("RDAC", NULL, SND_SOC_NOPM, 0, 0), |
| SND_SOC_DAPM_SUPPLY("PWND", RT9120_REG_SYSCTL, 6, 1, |
| internal_power_event, SND_SOC_DAPM_PRE_PMU | |
| SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), |
| SND_SOC_DAPM_PGA("SPKL PA", SND_SOC_NOPM, 0, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("SPKR PA", SND_SOC_NOPM, 0, 0, NULL, 0), |
| SND_SOC_DAPM_OUTPUT("SPKL"), |
| SND_SOC_DAPM_OUTPUT("SPKR"), |
| }; |
| |
| static const struct snd_soc_dapm_route rt9120_dapm_routes[] = { |
| { "DMIX", NULL, "AIF Playback" }, |
| /* SPKL */ |
| { "LDAC", NULL, "PWND" }, |
| { "LDAC", NULL, "DMIX" }, |
| { "SPKL PA", NULL, "LDAC" }, |
| { "SPKL", NULL, "SPKL PA" }, |
| /* SPKR */ |
| { "RDAC", NULL, "PWND" }, |
| { "RDAC", NULL, "DMIX" }, |
| { "SPKR PA", NULL, "RDAC" }, |
| { "SPKR", NULL, "SPKR PA" }, |
| /* Cap */ |
| { "AIF Capture", NULL, "LDAC" }, |
| { "AIF Capture", NULL, "RDAC" }, |
| }; |
| |
| static int rt9120_codec_probe(struct snd_soc_component *comp) |
| { |
| struct rt9120_data *data = snd_soc_component_get_drvdata(comp); |
| |
| snd_soc_component_init_regmap(comp, data->regmap); |
| |
| /* Internal setting */ |
| if (data->chip_idx == CHIP_IDX_RT9120S) { |
| snd_soc_component_write(comp, RT9120_REG_INTERCFG, 0xde); |
| snd_soc_component_write(comp, RT9120_REG_INTERNAL0, 0x66); |
| } else |
| snd_soc_component_write(comp, RT9120_REG_INTERNAL0, 0x04); |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_component_driver rt9120_component_driver = { |
| .probe = rt9120_codec_probe, |
| .controls = rt9120_snd_controls, |
| .num_controls = ARRAY_SIZE(rt9120_snd_controls), |
| .dapm_widgets = rt9120_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(rt9120_dapm_widgets), |
| .dapm_routes = rt9120_dapm_routes, |
| .num_dapm_routes = ARRAY_SIZE(rt9120_dapm_routes), |
| }; |
| |
| static int rt9120_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| struct snd_soc_component *comp = dai->component; |
| unsigned int format; |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| format = RT9120_CFG_FMT_I2S; |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| format = RT9120_CFG_FMT_LEFTJ; |
| break; |
| case SND_SOC_DAIFMT_RIGHT_J: |
| format = RT9120_CFG_FMT_RIGHTJ; |
| break; |
| case SND_SOC_DAIFMT_DSP_A: |
| format = RT9120_CFG_FMT_DSPA; |
| break; |
| case SND_SOC_DAIFMT_DSP_B: |
| format = RT9120_CFG_FMT_DSPB; |
| break; |
| default: |
| dev_err(dai->dev, "Unknown dai format\n"); |
| return -EINVAL; |
| } |
| |
| snd_soc_component_update_bits(comp, RT9120_REG_I2SFMT, |
| RT9120_I2SFMT_MASK, |
| format << RT9120_I2SFMT_SHIFT); |
| return 0; |
| } |
| |
| static int rt9120_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *param, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *comp = dai->component; |
| unsigned int param_width, param_slot_width, auto_sync; |
| int width, fs; |
| |
| switch (width = params_width(param)) { |
| case 16: |
| param_width = RT9120_CFG_AUDBIT_16; |
| break; |
| case 20: |
| param_width = RT9120_CFG_AUDBIT_20; |
| break; |
| case 24: |
| case 32: |
| param_width = RT9120_CFG_AUDBIT_24; |
| break; |
| default: |
| dev_err(dai->dev, "Unsupported data width [%d]\n", width); |
| return -EINVAL; |
| } |
| |
| snd_soc_component_update_bits(comp, RT9120_REG_I2SFMT, |
| RT9120_AUDBIT_MASK, param_width); |
| |
| switch (width = params_physical_width(param)) { |
| case 16: |
| param_slot_width = RT9120_CFG_WORDLEN_16; |
| break; |
| case 24: |
| param_slot_width = RT9120_CFG_WORDLEN_24; |
| break; |
| case 32: |
| param_slot_width = RT9120_CFG_WORDLEN_32; |
| break; |
| default: |
| dev_err(dai->dev, "Unsupported slot width [%d]\n", width); |
| return -EINVAL; |
| } |
| |
| snd_soc_component_update_bits(comp, RT9120_REG_I2SWL, |
| RT9120_AUDWL_MASK, param_slot_width); |
| |
| fs = width * params_channels(param); |
| /* If fs is divided by 48, disable auto sync */ |
| if (fs % 48 == 0) |
| auto_sync = 0; |
| else |
| auto_sync = RT9120_AUTOSYNC_MASK; |
| |
| snd_soc_component_update_bits(comp, RT9120_REG_DIGCFG, |
| RT9120_AUTOSYNC_MASK, auto_sync); |
| return 0; |
| } |
| |
| static const struct snd_soc_dai_ops rt9120_dai_ops = { |
| .set_fmt = rt9120_set_fmt, |
| .hw_params = rt9120_hw_params, |
| }; |
| |
| static struct snd_soc_dai_driver rt9120_dai = { |
| .name = "rt9120_aif", |
| .playback = { |
| .stream_name = "AIF Playback", |
| .rates = RT9120_RATES_MASK, |
| .formats = RT9120_FMTS_MASK, |
| .rate_max = 192000, |
| .rate_min = 8000, |
| .channels_min = 1, |
| .channels_max = 2, |
| }, |
| .capture = { |
| .stream_name = "AIF Capture", |
| .rates = RT9120_RATES_MASK, |
| .formats = RT9120_FMTS_MASK, |
| .rate_max = 192000, |
| .rate_min = 8000, |
| .channels_min = 1, |
| .channels_max = 2, |
| }, |
| .ops = &rt9120_dai_ops, |
| .symmetric_rate = 1, |
| .symmetric_sample_bits = 1, |
| }; |
| |
| static const struct regmap_range rt9120_rd_yes_ranges[] = { |
| regmap_reg_range(0x00, 0x0C), |
| regmap_reg_range(0x10, 0x15), |
| regmap_reg_range(0x20, 0x27), |
| regmap_reg_range(0x30, 0x38), |
| regmap_reg_range(0x3A, 0x40), |
| regmap_reg_range(0x63, 0x63), |
| regmap_reg_range(0x65, 0x65), |
| regmap_reg_range(0x69, 0x69), |
| regmap_reg_range(0x6C, 0x6C), |
| regmap_reg_range(0xF8, 0xF8) |
| }; |
| |
| static const struct regmap_access_table rt9120_rd_table = { |
| .yes_ranges = rt9120_rd_yes_ranges, |
| .n_yes_ranges = ARRAY_SIZE(rt9120_rd_yes_ranges), |
| }; |
| |
| static const struct regmap_range rt9120_wr_yes_ranges[] = { |
| regmap_reg_range(0x00, 0x00), |
| regmap_reg_range(0x02, 0x0A), |
| regmap_reg_range(0x10, 0x15), |
| regmap_reg_range(0x20, 0x27), |
| regmap_reg_range(0x30, 0x38), |
| regmap_reg_range(0x3A, 0x3D), |
| regmap_reg_range(0x40, 0x40), |
| regmap_reg_range(0x63, 0x63), |
| regmap_reg_range(0x65, 0x65), |
| regmap_reg_range(0x69, 0x69), |
| regmap_reg_range(0x6C, 0x6C), |
| regmap_reg_range(0xF8, 0xF8) |
| }; |
| |
| static const struct regmap_access_table rt9120_wr_table = { |
| .yes_ranges = rt9120_wr_yes_ranges, |
| .n_yes_ranges = ARRAY_SIZE(rt9120_wr_yes_ranges), |
| }; |
| |
| static int rt9120_get_reg_size(unsigned int reg) |
| { |
| switch (reg) { |
| case 0x00: |
| case 0x09: |
| case 0x20 ... 0x27: |
| return 2; |
| case 0x30 ... 0x3D: |
| return 3; |
| case 0x3E ... 0x3F: |
| return 4; |
| default: |
| return 1; |
| } |
| } |
| |
| static int rt9120_reg_read(void *context, unsigned int reg, unsigned int *val) |
| { |
| struct rt9120_data *data = context; |
| struct i2c_client *i2c = to_i2c_client(data->dev); |
| int size = rt9120_get_reg_size(reg); |
| u8 raw[4] = {0}; |
| int ret; |
| |
| ret = i2c_smbus_read_i2c_block_data(i2c, reg, size, raw); |
| if (ret < 0) |
| return ret; |
| else if (ret != size) |
| return -EIO; |
| |
| switch (size) { |
| case 4: |
| *val = be32_to_cpup((__be32 *)raw); |
| break; |
| case 3: |
| *val = raw[0] << 16 | raw[1] << 8 | raw[0]; |
| break; |
| case 2: |
| *val = be16_to_cpup((__be16 *)raw); |
| break; |
| default: |
| *val = raw[0]; |
| } |
| |
| return 0; |
| } |
| |
| static int rt9120_reg_write(void *context, unsigned int reg, unsigned int val) |
| { |
| struct rt9120_data *data = context; |
| struct i2c_client *i2c = to_i2c_client(data->dev); |
| int size = rt9120_get_reg_size(reg); |
| __be32 be32_val; |
| u8 *rawp = (u8 *)&be32_val; |
| int offs = 4 - size; |
| |
| be32_val = cpu_to_be32(val); |
| return i2c_smbus_write_i2c_block_data(i2c, reg, size, rawp + offs); |
| } |
| |
| static const struct regmap_config rt9120_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 32, |
| .max_register = RT9120_REG_DIGCFG, |
| |
| .reg_read = rt9120_reg_read, |
| .reg_write = rt9120_reg_write, |
| |
| .wr_table = &rt9120_wr_table, |
| .rd_table = &rt9120_rd_table, |
| }; |
| |
| static int rt9120_check_vendor_info(struct rt9120_data *data) |
| { |
| unsigned int devid; |
| int ret; |
| |
| ret = regmap_read(data->regmap, RT9120_REG_DEVID, &devid); |
| if (ret) |
| return ret; |
| |
| devid = FIELD_GET(RT9120_VID_MASK, devid); |
| switch (devid) { |
| case RT9120_VENDOR_ID: |
| data->chip_idx = CHIP_IDX_RT9120; |
| break; |
| case RT9120S_VENDOR_ID: |
| data->chip_idx = CHIP_IDX_RT9120S; |
| break; |
| default: |
| dev_err(data->dev, "DEVID not correct [0x%0x]\n", devid); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int rt9120_do_register_reset(struct rt9120_data *data) |
| { |
| int ret; |
| |
| ret = regmap_write(data->regmap, RT9120_REG_SWRESET, |
| RT9120_SWRST_MASK); |
| if (ret) |
| return ret; |
| |
| msleep(RT9120_RESET_WAITMS); |
| return 0; |
| } |
| |
| static int rt9120_probe(struct i2c_client *i2c) |
| { |
| struct rt9120_data *data; |
| struct gpio_desc *pwdnn_gpio; |
| struct regulator *dvdd_supply; |
| int dvdd_supply_volt, ret; |
| |
| data = devm_kzalloc(&i2c->dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->dev = &i2c->dev; |
| i2c_set_clientdata(i2c, data); |
| |
| pwdnn_gpio = devm_gpiod_get_optional(&i2c->dev, "pwdnn", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(pwdnn_gpio)) { |
| dev_err(&i2c->dev, "Failed to initialize 'pwdnn' gpio\n"); |
| return PTR_ERR(pwdnn_gpio); |
| } else if (pwdnn_gpio) { |
| dev_dbg(&i2c->dev, "'pwdnn' from low to high, wait chip on\n"); |
| msleep(RT9120_CHIPON_WAITMS); |
| } |
| |
| data->regmap = devm_regmap_init(&i2c->dev, NULL, data, |
| &rt9120_regmap_config); |
| if (IS_ERR(data->regmap)) { |
| ret = PTR_ERR(data->regmap); |
| dev_err(&i2c->dev, "Failed to init regmap [%d]\n", ret); |
| return ret; |
| } |
| |
| ret = rt9120_check_vendor_info(data); |
| if (ret) { |
| dev_err(&i2c->dev, "Failed to check vendor info\n"); |
| return ret; |
| } |
| |
| ret = rt9120_do_register_reset(data); |
| if (ret) { |
| dev_err(&i2c->dev, "Failed to do register reset\n"); |
| return ret; |
| } |
| |
| dvdd_supply = devm_regulator_get(&i2c->dev, "dvdd"); |
| if (IS_ERR(dvdd_supply)) { |
| dev_err(&i2c->dev, "No dvdd regulator found\n"); |
| return PTR_ERR(dvdd_supply); |
| } |
| |
| dvdd_supply_volt = regulator_get_voltage(dvdd_supply); |
| if (dvdd_supply_volt <= RT9120_LVAPP_THRESUV) { |
| dev_dbg(&i2c->dev, "dvdd low voltage design\n"); |
| ret = regmap_update_bits(data->regmap, RT9120_REG_UVPOPT, |
| RT9120_DVDD_UVSEL_MASK, 0); |
| if (ret) { |
| dev_err(&i2c->dev, "Failed to config dvdd uvsel\n"); |
| return ret; |
| } |
| } |
| |
| return devm_snd_soc_register_component(&i2c->dev, |
| &rt9120_component_driver, |
| &rt9120_dai, 1); |
| } |
| |
| static const struct of_device_id __maybe_unused rt9120_device_table[] = { |
| { .compatible = "richtek,rt9120", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, rt9120_device_table); |
| |
| static struct i2c_driver rt9120_driver = { |
| .driver = { |
| .name = "rt9120", |
| .of_match_table = rt9120_device_table, |
| }, |
| .probe_new = rt9120_probe, |
| }; |
| module_i2c_driver(rt9120_driver); |
| |
| MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); |
| MODULE_DESCRIPTION("RT9120 Audio Amplifier Driver"); |
| MODULE_LICENSE("GPL"); |