| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Auvitek AU8522 QAM/8VSB demodulator driver and video decoder |
| * |
| * Copyright (C) 2009 Devin Heitmueller <dheitmueller@linuxtv.org> |
| * Copyright (C) 2005-2008 Auvitek International, Ltd. |
| */ |
| |
| /* Developer notes: |
| * |
| * Enough is implemented here for CVBS and S-Video inputs, but the actual |
| * analog demodulator code isn't implemented (not needed for xc5000 since it |
| * has its own demodulator and outputs CVBS) |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/videodev2.h> |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-device.h> |
| #include "au8522.h" |
| #include "au8522_priv.h" |
| |
| MODULE_AUTHOR("Devin Heitmueller"); |
| MODULE_LICENSE("GPL"); |
| |
| static int au8522_analog_debug; |
| |
| |
| module_param_named(analog_debug, au8522_analog_debug, int, 0644); |
| |
| MODULE_PARM_DESC(analog_debug, |
| "Analog debugging messages [0=Off (default) 1=On]"); |
| |
| struct au8522_register_config { |
| u16 reg_name; |
| u8 reg_val[8]; |
| }; |
| |
| |
| /* Video Decoder Filter Coefficients |
| The values are as follows from left to right |
| 0="ATV RF" 1="ATV RF13" 2="CVBS" 3="S-Video" 4="PAL" 5=CVBS13" 6="SVideo13" |
| */ |
| static const struct au8522_register_config filter_coef[] = { |
| {AU8522_FILTER_COEF_R410, {0x25, 0x00, 0x25, 0x25, 0x00, 0x00, 0x00} }, |
| {AU8522_FILTER_COEF_R411, {0x20, 0x00, 0x20, 0x20, 0x00, 0x00, 0x00} }, |
| {AU8522_FILTER_COEF_R412, {0x03, 0x00, 0x03, 0x03, 0x00, 0x00, 0x00} }, |
| {AU8522_FILTER_COEF_R413, {0xe6, 0x00, 0xe6, 0xe6, 0x00, 0x00, 0x00} }, |
| {AU8522_FILTER_COEF_R414, {0x40, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00} }, |
| {AU8522_FILTER_COEF_R415, {0x1b, 0x00, 0x1b, 0x1b, 0x00, 0x00, 0x00} }, |
| {AU8522_FILTER_COEF_R416, {0xc0, 0x00, 0xc0, 0x04, 0x00, 0x00, 0x00} }, |
| {AU8522_FILTER_COEF_R417, {0x04, 0x00, 0x04, 0x04, 0x00, 0x00, 0x00} }, |
| {AU8522_FILTER_COEF_R418, {0x8c, 0x00, 0x8c, 0x8c, 0x00, 0x00, 0x00} }, |
| {AU8522_FILTER_COEF_R419, {0xa0, 0x40, 0xa0, 0xa0, 0x40, 0x40, 0x40} }, |
| {AU8522_FILTER_COEF_R41A, {0x21, 0x09, 0x21, 0x21, 0x09, 0x09, 0x09} }, |
| {AU8522_FILTER_COEF_R41B, {0x6c, 0x38, 0x6c, 0x6c, 0x38, 0x38, 0x38} }, |
| {AU8522_FILTER_COEF_R41C, {0x03, 0xff, 0x03, 0x03, 0xff, 0xff, 0xff} }, |
| {AU8522_FILTER_COEF_R41D, {0xbf, 0xc7, 0xbf, 0xbf, 0xc7, 0xc7, 0xc7} }, |
| {AU8522_FILTER_COEF_R41E, {0xa0, 0xdf, 0xa0, 0xa0, 0xdf, 0xdf, 0xdf} }, |
| {AU8522_FILTER_COEF_R41F, {0x10, 0x06, 0x10, 0x10, 0x06, 0x06, 0x06} }, |
| {AU8522_FILTER_COEF_R420, {0xae, 0x30, 0xae, 0xae, 0x30, 0x30, 0x30} }, |
| {AU8522_FILTER_COEF_R421, {0xc4, 0x01, 0xc4, 0xc4, 0x01, 0x01, 0x01} }, |
| {AU8522_FILTER_COEF_R422, {0x54, 0xdd, 0x54, 0x54, 0xdd, 0xdd, 0xdd} }, |
| {AU8522_FILTER_COEF_R423, {0xd0, 0xaf, 0xd0, 0xd0, 0xaf, 0xaf, 0xaf} }, |
| {AU8522_FILTER_COEF_R424, {0x1c, 0xf7, 0x1c, 0x1c, 0xf7, 0xf7, 0xf7} }, |
| {AU8522_FILTER_COEF_R425, {0x76, 0xdb, 0x76, 0x76, 0xdb, 0xdb, 0xdb} }, |
| {AU8522_FILTER_COEF_R426, {0x61, 0xc0, 0x61, 0x61, 0xc0, 0xc0, 0xc0} }, |
| {AU8522_FILTER_COEF_R427, {0xd1, 0x2f, 0xd1, 0xd1, 0x2f, 0x2f, 0x2f} }, |
| {AU8522_FILTER_COEF_R428, {0x84, 0xd8, 0x84, 0x84, 0xd8, 0xd8, 0xd8} }, |
| {AU8522_FILTER_COEF_R429, {0x06, 0xfb, 0x06, 0x06, 0xfb, 0xfb, 0xfb} }, |
| {AU8522_FILTER_COEF_R42A, {0x21, 0xd5, 0x21, 0x21, 0xd5, 0xd5, 0xd5} }, |
| {AU8522_FILTER_COEF_R42B, {0x0a, 0x3e, 0x0a, 0x0a, 0x3e, 0x3e, 0x3e} }, |
| {AU8522_FILTER_COEF_R42C, {0xe6, 0x15, 0xe6, 0xe6, 0x15, 0x15, 0x15} }, |
| {AU8522_FILTER_COEF_R42D, {0x01, 0x34, 0x01, 0x01, 0x34, 0x34, 0x34} }, |
| |
| }; |
| #define NUM_FILTER_COEF (sizeof(filter_coef)\ |
| / sizeof(struct au8522_register_config)) |
| |
| |
| /* Registers 0x060b through 0x0652 are the LP Filter coefficients |
| The values are as follows from left to right |
| 0="SIF" 1="ATVRF/ATVRF13" |
| Note: the "ATVRF/ATVRF13" mode has never been tested |
| */ |
| static const struct au8522_register_config lpfilter_coef[] = { |
| {0x060b, {0x21, 0x0b} }, |
| {0x060c, {0xad, 0xad} }, |
| {0x060d, {0x70, 0xf0} }, |
| {0x060e, {0xea, 0xe9} }, |
| {0x060f, {0xdd, 0xdd} }, |
| {0x0610, {0x08, 0x64} }, |
| {0x0611, {0x60, 0x60} }, |
| {0x0612, {0xf8, 0xb2} }, |
| {0x0613, {0x01, 0x02} }, |
| {0x0614, {0xe4, 0xb4} }, |
| {0x0615, {0x19, 0x02} }, |
| {0x0616, {0xae, 0x2e} }, |
| {0x0617, {0xee, 0xc5} }, |
| {0x0618, {0x56, 0x56} }, |
| {0x0619, {0x30, 0x58} }, |
| {0x061a, {0xf9, 0xf8} }, |
| {0x061b, {0x24, 0x64} }, |
| {0x061c, {0x07, 0x07} }, |
| {0x061d, {0x30, 0x30} }, |
| {0x061e, {0xa9, 0xed} }, |
| {0x061f, {0x09, 0x0b} }, |
| {0x0620, {0x42, 0xc2} }, |
| {0x0621, {0x1d, 0x2a} }, |
| {0x0622, {0xd6, 0x56} }, |
| {0x0623, {0x95, 0x8b} }, |
| {0x0624, {0x2b, 0x2b} }, |
| {0x0625, {0x30, 0x24} }, |
| {0x0626, {0x3e, 0x3e} }, |
| {0x0627, {0x62, 0xe2} }, |
| {0x0628, {0xe9, 0xf5} }, |
| {0x0629, {0x99, 0x19} }, |
| {0x062a, {0xd4, 0x11} }, |
| {0x062b, {0x03, 0x04} }, |
| {0x062c, {0xb5, 0x85} }, |
| {0x062d, {0x1e, 0x20} }, |
| {0x062e, {0x2a, 0xea} }, |
| {0x062f, {0xd7, 0xd2} }, |
| {0x0630, {0x15, 0x15} }, |
| {0x0631, {0xa3, 0xa9} }, |
| {0x0632, {0x1f, 0x1f} }, |
| {0x0633, {0xf9, 0xd1} }, |
| {0x0634, {0xc0, 0xc3} }, |
| {0x0635, {0x4d, 0x8d} }, |
| {0x0636, {0x21, 0x31} }, |
| {0x0637, {0x83, 0x83} }, |
| {0x0638, {0x08, 0x8c} }, |
| {0x0639, {0x19, 0x19} }, |
| {0x063a, {0x45, 0xa5} }, |
| {0x063b, {0xef, 0xec} }, |
| {0x063c, {0x8a, 0x8a} }, |
| {0x063d, {0xf4, 0xf6} }, |
| {0x063e, {0x8f, 0x8f} }, |
| {0x063f, {0x44, 0x0c} }, |
| {0x0640, {0xef, 0xf0} }, |
| {0x0641, {0x66, 0x66} }, |
| {0x0642, {0xcc, 0xd2} }, |
| {0x0643, {0x41, 0x41} }, |
| {0x0644, {0x63, 0x93} }, |
| {0x0645, {0x8e, 0x8e} }, |
| {0x0646, {0xa2, 0x42} }, |
| {0x0647, {0x7b, 0x7b} }, |
| {0x0648, {0x04, 0x04} }, |
| {0x0649, {0x00, 0x00} }, |
| {0x064a, {0x40, 0x40} }, |
| {0x064b, {0x8c, 0x98} }, |
| {0x064c, {0x00, 0x00} }, |
| {0x064d, {0x63, 0xc3} }, |
| {0x064e, {0x04, 0x04} }, |
| {0x064f, {0x20, 0x20} }, |
| {0x0650, {0x00, 0x00} }, |
| {0x0651, {0x40, 0x40} }, |
| {0x0652, {0x01, 0x01} }, |
| }; |
| #define NUM_LPFILTER_COEF (sizeof(lpfilter_coef)\ |
| / sizeof(struct au8522_register_config)) |
| |
| static inline struct au8522_state *to_state(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct au8522_state, sd); |
| } |
| |
| static void setup_decoder_defaults(struct au8522_state *state, bool is_svideo) |
| { |
| int i; |
| int filter_coef_type; |
| |
| /* Provide reasonable defaults for picture tuning values */ |
| au8522_writereg(state, AU8522_TVDEC_SHARPNESSREG009H, 0x07); |
| au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH, 0xed); |
| au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH, 0x79); |
| au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH, 0x80); |
| au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH, 0x80); |
| au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH, 0x00); |
| au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH, 0x00); |
| |
| /* Other decoder registers */ |
| au8522_writereg(state, AU8522_TVDEC_INT_MASK_REG010H, 0x00); |
| |
| if (is_svideo) |
| au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x04); |
| else |
| au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x00); |
| |
| au8522_writereg(state, AU8522_TVDEC_PGA_REG012H, |
| AU8522_TVDEC_PGA_REG012H_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_COMB_MODE_REG015H, |
| AU8522_TVDEC_COMB_MODE_REG015H_CVBS); |
| au8522_writereg(state, AU8522_TVDED_DBG_MODE_REG060H, |
| AU8522_TVDED_DBG_MODE_REG060H_CVBS); |
| |
| if (state->std == V4L2_STD_PAL_M) { |
| au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL1_REG061H, |
| AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_525 | |
| AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_492 | |
| AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_AUTO); |
| au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL2_REG062H, |
| AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_PAL_M); |
| } else { |
| /* NTSC */ |
| au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL1_REG061H, |
| AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_525 | |
| AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_492 | |
| AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_MN); |
| au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL2_REG062H, |
| AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_NTSC); |
| } |
| au8522_writereg(state, AU8522_TVDEC_VCR_DET_LLIM_REG063H, |
| AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_VCR_DET_HLIM_REG064H, |
| AU8522_TVDEC_VCR_DET_HLIM_REG064H_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR1_REG065H, |
| AU8522_TVDEC_COMB_VDIF_THR1_REG065H_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR2_REG066H, |
| AU8522_TVDEC_COMB_VDIF_THR2_REG066H_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR3_REG067H, |
| AU8522_TVDEC_COMB_VDIF_THR3_REG067H_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_COMB_NOTCH_THR_REG068H, |
| AU8522_TVDEC_COMB_NOTCH_THR_REG068H_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR1_REG069H, |
| AU8522_TVDEC_COMB_HDIF_THR1_REG069H_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR2_REG06AH, |
| AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR3_REG06BH, |
| AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS); |
| if (is_svideo) { |
| au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH, |
| AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO); |
| au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH, |
| AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO); |
| } else { |
| au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH, |
| AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH, |
| AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS); |
| } |
| au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH, |
| AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_UV_SEP_THR_REG06FH, |
| AU8522_TVDEC_UV_SEP_THR_REG06FH_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H, |
| AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H_CVBS); |
| au8522_writereg(state, AU8522_REG071H, AU8522_REG071H_CVBS); |
| au8522_writereg(state, AU8522_REG072H, AU8522_REG072H_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H, |
| AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H_CVBS); |
| au8522_writereg(state, AU8522_REG074H, AU8522_REG074H_CVBS); |
| au8522_writereg(state, AU8522_REG075H, AU8522_REG075H_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_DCAGC_CTRL_REG077H, |
| AU8522_TVDEC_DCAGC_CTRL_REG077H_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_PIC_START_ADJ_REG078H, |
| AU8522_TVDEC_PIC_START_ADJ_REG078H_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H, |
| AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH, |
| AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_INTRP_CTRL_REG07BH, |
| AU8522_TVDEC_INTRP_CTRL_REG07BH_CVBS); |
| au8522_writereg(state, AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H, |
| AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H_CVBS); |
| au8522_writereg(state, AU8522_TOREGAAGC_REG0E5H, |
| AU8522_TOREGAAGC_REG0E5H_CVBS); |
| au8522_writereg(state, AU8522_REG016H, AU8522_REG016H_CVBS); |
| |
| /* |
| * Despite what the table says, for the HVR-950q we still need |
| * to be in CVBS mode for the S-Video input (reason unknown). |
| */ |
| /* filter_coef_type = 3; */ |
| filter_coef_type = 5; |
| |
| /* Load the Video Decoder Filter Coefficients */ |
| for (i = 0; i < NUM_FILTER_COEF; i++) { |
| au8522_writereg(state, filter_coef[i].reg_name, |
| filter_coef[i].reg_val[filter_coef_type]); |
| } |
| |
| /* It's not clear what these registers are for, but they are always |
| set to the same value regardless of what mode we're in */ |
| au8522_writereg(state, AU8522_REG42EH, 0x87); |
| au8522_writereg(state, AU8522_REG42FH, 0xa2); |
| au8522_writereg(state, AU8522_REG430H, 0xbf); |
| au8522_writereg(state, AU8522_REG431H, 0xcb); |
| au8522_writereg(state, AU8522_REG432H, 0xa1); |
| au8522_writereg(state, AU8522_REG433H, 0x41); |
| au8522_writereg(state, AU8522_REG434H, 0x88); |
| au8522_writereg(state, AU8522_REG435H, 0xc2); |
| au8522_writereg(state, AU8522_REG436H, 0x3c); |
| } |
| |
| static void au8522_setup_cvbs_mode(struct au8522_state *state, u8 input_mode) |
| { |
| /* here we're going to try the pre-programmed route */ |
| au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H, |
| AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS); |
| |
| /* PGA in automatic mode */ |
| au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00); |
| |
| /* Enable clamping control */ |
| au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00); |
| |
| au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H, input_mode); |
| |
| setup_decoder_defaults(state, false); |
| |
| au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, |
| AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS); |
| } |
| |
| static void au8522_setup_cvbs_tuner_mode(struct au8522_state *state, |
| u8 input_mode) |
| { |
| /* here we're going to try the pre-programmed route */ |
| au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H, |
| AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS); |
| |
| /* It's not clear why we have to have the PGA in automatic mode while |
| enabling clamp control, but it's what Windows does */ |
| au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00); |
| |
| /* Enable clamping control */ |
| au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x0e); |
| |
| /* Disable automatic PGA (since the CVBS is coming from the tuner) */ |
| au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x10); |
| |
| /* Set input mode to CVBS on channel 4 with SIF audio input enabled */ |
| au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H, input_mode); |
| |
| setup_decoder_defaults(state, false); |
| |
| au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, |
| AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS); |
| } |
| |
| static void au8522_setup_svideo_mode(struct au8522_state *state, |
| u8 input_mode) |
| { |
| au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H, |
| AU8522_MODULE_CLOCK_CONTROL_REG0A3H_SVIDEO); |
| |
| /* Set input to Y on Channe1, C on Channel 3 */ |
| au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H, input_mode); |
| |
| /* PGA in automatic mode */ |
| au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00); |
| |
| /* Enable clamping control */ |
| au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00); |
| |
| setup_decoder_defaults(state, true); |
| |
| au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, |
| AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static void disable_audio_input(struct au8522_state *state) |
| { |
| au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00); |
| au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00); |
| au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00); |
| |
| au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x04); |
| au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0x02); |
| |
| au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, |
| AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_SVIDEO); |
| } |
| |
| /* 0=disable, 1=SIF */ |
| static void set_audio_input(struct au8522_state *state) |
| { |
| int aud_input = state->aud_input; |
| int i; |
| |
| /* Note that this function needs to be used in conjunction with setting |
| the input routing via register 0x81 */ |
| |
| if (aud_input == AU8522_AUDIO_NONE) { |
| disable_audio_input(state); |
| return; |
| } |
| |
| if (aud_input != AU8522_AUDIO_SIF) { |
| /* The caller asked for a mode we don't currently support */ |
| printk(KERN_ERR "Unsupported audio mode requested! mode=%d\n", |
| aud_input); |
| return; |
| } |
| |
| /* Load the Audio Decoder Filter Coefficients */ |
| for (i = 0; i < NUM_LPFILTER_COEF; i++) { |
| au8522_writereg(state, lpfilter_coef[i].reg_name, |
| lpfilter_coef[i].reg_val[0]); |
| } |
| |
| /* Set the volume */ |
| au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F); |
| au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F); |
| au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0xff); |
| |
| /* Not sure what this does */ |
| au8522_writereg(state, AU8522_REG0F9H, AU8522_REG0F9H_AUDIO); |
| |
| /* Setup the audio mode to stereo DBX */ |
| au8522_writereg(state, AU8522_AUDIO_MODE_REG0F1H, 0x82); |
| msleep(70); |
| |
| /* Start the audio processing module */ |
| au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x9d); |
| |
| /* Set the audio frequency to 48 KHz */ |
| au8522_writereg(state, AU8522_AUDIOFREQ_REG606H, 0x03); |
| |
| /* Set the I2S parameters (WS, LSB, mode, sample rate */ |
| au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0xc2); |
| |
| /* Enable the I2S output */ |
| au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x09); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static int au8522_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct au8522_state *state = |
| container_of(ctrl->handler, struct au8522_state, hdl); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH, |
| ctrl->val - 128); |
| break; |
| case V4L2_CID_CONTRAST: |
| au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH, |
| ctrl->val); |
| break; |
| case V4L2_CID_SATURATION: |
| au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH, |
| ctrl->val); |
| au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH, |
| ctrl->val); |
| break; |
| case V4L2_CID_HUE: |
| au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH, |
| ctrl->val >> 8); |
| au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH, |
| ctrl->val & 0xFF); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static int au8522_g_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct au8522_state *state = to_state(sd); |
| |
| reg->val = au8522_readreg(state, reg->reg & 0xffff); |
| return 0; |
| } |
| |
| static int au8522_s_register(struct v4l2_subdev *sd, |
| const struct v4l2_dbg_register *reg) |
| { |
| struct au8522_state *state = to_state(sd); |
| |
| au8522_writereg(state, reg->reg, reg->val & 0xff); |
| return 0; |
| } |
| #endif |
| |
| static void au8522_video_set(struct au8522_state *state) |
| { |
| u8 input_mode; |
| |
| au8522_writereg(state, 0xa4, 1 << 5); |
| |
| switch (state->vid_input) { |
| case AU8522_COMPOSITE_CH1: |
| input_mode = AU8522_INPUT_CONTROL_REG081H_CVBS_CH1; |
| au8522_setup_cvbs_mode(state, input_mode); |
| break; |
| case AU8522_COMPOSITE_CH2: |
| input_mode = AU8522_INPUT_CONTROL_REG081H_CVBS_CH2; |
| au8522_setup_cvbs_mode(state, input_mode); |
| break; |
| case AU8522_COMPOSITE_CH3: |
| input_mode = AU8522_INPUT_CONTROL_REG081H_CVBS_CH3; |
| au8522_setup_cvbs_mode(state, input_mode); |
| break; |
| case AU8522_COMPOSITE_CH4: |
| input_mode = AU8522_INPUT_CONTROL_REG081H_CVBS_CH4; |
| au8522_setup_cvbs_mode(state, input_mode); |
| break; |
| case AU8522_SVIDEO_CH13: |
| input_mode = AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13; |
| au8522_setup_svideo_mode(state, input_mode); |
| break; |
| case AU8522_SVIDEO_CH24: |
| input_mode = AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24; |
| au8522_setup_svideo_mode(state, input_mode); |
| break; |
| default: |
| case AU8522_COMPOSITE_CH4_SIF: |
| input_mode = AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF; |
| au8522_setup_cvbs_tuner_mode(state, input_mode); |
| break; |
| } |
| } |
| |
| static int au8522_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct au8522_state *state = to_state(sd); |
| |
| if (enable) { |
| /* |
| * Clear out any state associated with the digital side of the |
| * chip, so that when it gets powered back up it won't think |
| * that it is already tuned |
| */ |
| state->current_frequency = 0; |
| |
| au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, |
| 0x01); |
| msleep(10); |
| |
| au8522_video_set(state); |
| set_audio_input(state); |
| |
| state->operational_mode = AU8522_ANALOG_MODE; |
| } else { |
| /* This does not completely power down the device |
| (it only reduces it from around 140ma to 80ma) */ |
| au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, |
| 1 << 5); |
| state->operational_mode = AU8522_SUSPEND_MODE; |
| } |
| return 0; |
| } |
| |
| static int au8522_s_video_routing(struct v4l2_subdev *sd, |
| u32 input, u32 output, u32 config) |
| { |
| struct au8522_state *state = to_state(sd); |
| |
| switch (input) { |
| case AU8522_COMPOSITE_CH1: |
| case AU8522_SVIDEO_CH13: |
| case AU8522_COMPOSITE_CH4_SIF: |
| state->vid_input = input; |
| break; |
| default: |
| printk(KERN_ERR "au8522 mode not currently supported\n"); |
| return -EINVAL; |
| } |
| |
| if (state->operational_mode == AU8522_ANALOG_MODE) |
| au8522_video_set(state); |
| |
| return 0; |
| } |
| |
| static int au8522_s_std(struct v4l2_subdev *sd, v4l2_std_id std) |
| { |
| struct au8522_state *state = to_state(sd); |
| |
| if ((std & (V4L2_STD_PAL_M | V4L2_STD_NTSC_M)) == 0) |
| return -EINVAL; |
| |
| state->std = std; |
| |
| if (state->operational_mode == AU8522_ANALOG_MODE) |
| au8522_video_set(state); |
| |
| return 0; |
| } |
| |
| static int au8522_s_audio_routing(struct v4l2_subdev *sd, |
| u32 input, u32 output, u32 config) |
| { |
| struct au8522_state *state = to_state(sd); |
| |
| state->aud_input = input; |
| |
| if (state->operational_mode == AU8522_ANALOG_MODE) |
| set_audio_input(state); |
| |
| return 0; |
| } |
| |
| static int au8522_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) |
| { |
| int val = 0; |
| struct au8522_state *state = to_state(sd); |
| u8 lock_status; |
| u8 pll_status; |
| |
| /* Interrogate the decoder to see if we are getting a real signal */ |
| lock_status = au8522_readreg(state, 0x00); |
| pll_status = au8522_readreg(state, 0x7e); |
| if ((lock_status == 0xa2) && (pll_status & 0x10)) |
| vt->signal = 0xffff; |
| else |
| vt->signal = 0x00; |
| |
| vt->capability |= |
| V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | |
| V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; |
| |
| val = V4L2_TUNER_SUB_MONO; |
| vt->rxsubchans = val; |
| vt->audmode = V4L2_TUNER_MODE_STEREO; |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static const struct v4l2_subdev_core_ops au8522_core_ops = { |
| .log_status = v4l2_ctrl_subdev_log_status, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = au8522_g_register, |
| .s_register = au8522_s_register, |
| #endif |
| }; |
| |
| static const struct v4l2_subdev_tuner_ops au8522_tuner_ops = { |
| .g_tuner = au8522_g_tuner, |
| }; |
| |
| static const struct v4l2_subdev_audio_ops au8522_audio_ops = { |
| .s_routing = au8522_s_audio_routing, |
| }; |
| |
| static const struct v4l2_subdev_video_ops au8522_video_ops = { |
| .s_routing = au8522_s_video_routing, |
| .s_stream = au8522_s_stream, |
| .s_std = au8522_s_std, |
| }; |
| |
| static const struct v4l2_subdev_ops au8522_ops = { |
| .core = &au8522_core_ops, |
| .tuner = &au8522_tuner_ops, |
| .audio = &au8522_audio_ops, |
| .video = &au8522_video_ops, |
| }; |
| |
| static const struct v4l2_ctrl_ops au8522_ctrl_ops = { |
| .s_ctrl = au8522_s_ctrl, |
| }; |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static int au8522_probe(struct i2c_client *client) |
| { |
| struct au8522_state *state; |
| struct v4l2_ctrl_handler *hdl; |
| struct v4l2_subdev *sd; |
| int instance; |
| #ifdef CONFIG_MEDIA_CONTROLLER |
| int ret; |
| #endif |
| |
| /* Check if the adapter supports the needed features */ |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_BYTE_DATA)) { |
| return -EIO; |
| } |
| |
| /* allocate memory for the internal state */ |
| instance = au8522_get_state(&state, client->adapter, client->addr); |
| switch (instance) { |
| case 0: |
| printk(KERN_ERR "au8522_decoder allocation failed\n"); |
| return -EIO; |
| case 1: |
| /* new demod instance */ |
| printk(KERN_INFO "au8522_decoder creating new instance...\n"); |
| break; |
| default: |
| /* existing demod instance */ |
| printk(KERN_INFO "au8522_decoder attach existing instance.\n"); |
| break; |
| } |
| |
| state->config.demod_address = 0x8e >> 1; |
| state->i2c = client->adapter; |
| |
| sd = &state->sd; |
| v4l2_i2c_subdev_init(sd, client, &au8522_ops); |
| #if defined(CONFIG_MEDIA_CONTROLLER) |
| |
| state->pads[AU8522_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK; |
| state->pads[AU8522_PAD_IF_INPUT].sig_type = PAD_SIGNAL_ANALOG; |
| state->pads[AU8522_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE; |
| state->pads[AU8522_PAD_VID_OUT].sig_type = PAD_SIGNAL_DV; |
| state->pads[AU8522_PAD_AUDIO_OUT].flags = MEDIA_PAD_FL_SOURCE; |
| state->pads[AU8522_PAD_AUDIO_OUT].sig_type = PAD_SIGNAL_AUDIO; |
| sd->entity.function = MEDIA_ENT_F_ATV_DECODER; |
| |
| ret = media_entity_pads_init(&sd->entity, ARRAY_SIZE(state->pads), |
| state->pads); |
| if (ret < 0) { |
| v4l_info(client, "failed to initialize media entity!\n"); |
| return ret; |
| } |
| #endif |
| |
| hdl = &state->hdl; |
| v4l2_ctrl_handler_init(hdl, 4); |
| v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops, |
| V4L2_CID_BRIGHTNESS, 0, 255, 1, 109); |
| v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops, |
| V4L2_CID_CONTRAST, 0, 255, 1, |
| AU8522_TVDEC_CONTRAST_REG00BH_CVBS); |
| v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops, |
| V4L2_CID_SATURATION, 0, 255, 1, 128); |
| v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops, |
| V4L2_CID_HUE, -32768, 32767, 1, 0); |
| sd->ctrl_handler = hdl; |
| if (hdl->error) { |
| int err = hdl->error; |
| |
| v4l2_ctrl_handler_free(hdl); |
| au8522_release_state(state); |
| return err; |
| } |
| |
| state->c = client; |
| state->std = V4L2_STD_NTSC_M; |
| state->vid_input = AU8522_COMPOSITE_CH1; |
| state->aud_input = AU8522_AUDIO_NONE; |
| state->id = 8522; |
| state->rev = 0; |
| |
| /* Jam open the i2c gate to the tuner */ |
| au8522_writereg(state, 0x106, 1); |
| |
| return 0; |
| } |
| |
| static void au8522_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| v4l2_device_unregister_subdev(sd); |
| v4l2_ctrl_handler_free(sd->ctrl_handler); |
| au8522_release_state(to_state(sd)); |
| } |
| |
| static const struct i2c_device_id au8522_id[] = { |
| {"au8522", 0}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, au8522_id); |
| |
| static struct i2c_driver au8522_driver = { |
| .driver = { |
| .name = "au8522", |
| }, |
| .probe_new = au8522_probe, |
| .remove = au8522_remove, |
| .id_table = au8522_id, |
| }; |
| |
| module_i2c_driver(au8522_driver); |