blob: 623a4b5cd27a86ce9af07593ae271154327ea048 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/stericsson,ab8500.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ST-Ericsson Analog Baseband AB8500 and AB8505
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
description:
the AB8500 "Analog Baseband" is the mixed-signals integrated circuit
handling power management (regulators), analog-to-digital conversion
(ADC), battery charging, fuel gauging of the battery, battery-backed
RTC, PWM, USB PHY and some GPIO lines in the ST-Ericsson U8500 platforms
in connection with the DB8500 digital baseband. The DB8500 PRCMU
communicates directly and autonomously with the AB8500 and thus it
appears as a subnode of the DB8500 PRCMU. An altered version called
AB8505 also exist, the difference in AB8505 is that some of the USB and
USB charging handling has changed, and it has an embedded USB-to-serial
converter. Most subblocks takes their interrupts directly from the
AB8500 embedded interrupt controller.
properties:
$nodename:
pattern: '^ab850[05]$'
compatible:
enum:
- stericsson,ab8500
- stericsson,ab8505
interrupts:
maxItems: 1
interrupt-controller: true
'#interrupt-cells':
const: 2
# Some subnodes use a reg, some don't. Those that do use a single cell.
'#address-cells':
const: 1
'#size-cells':
const: 0
clock-controller:
description: Node describing the AB8500 clock controller. This
provides the reference clock for the entire U8500 system and
the DB8500 counterpart.
type: object
properties:
compatible:
const: stericsson,ab8500-clk
'#clock-cells':
const: 1
gpio:
description: Node describing the AB8500 GPIO controller. A few
GPIO pins available for misc usage.
type: object
properties:
compatible:
enum:
- stericsson,ab8500-gpio
- stericsson,ab8505-gpio
gpio-controller: true
'#gpio-cells':
const: 2
rtc:
description: Node describing the AB8500 battery-backed RTC.
type: object
properties:
compatible:
const: stericsson,ab8500-rtc
interrupts:
items:
- description: 60 second interval alarm interrupt
- description: RTC alarm
interrupt-names:
items:
- const: 60S
- const: ALARM
adc:
description: Node describing the AB8500 general purpose analog to digital
converter, GPADC.
type: object
properties:
compatible:
const: stericsson,ab8500-gpadc
# AB8505 only supports one (software) EOC interrupt
interrupts:
minItems: 1
maxItems: 2
interrupt-names: true
vddadc-supply: true
'#address-cells':
const: 1
'#size-cells':
const: 0
'#io-channel-cells':
const: 1
patternProperties:
"^channel@[0-9a-f]+$":
type: object
$ref: ../iio/adc/adc.yaml#
description: Represents each of the external channels which are
connected to the ADC.
properties:
reg:
items:
minimum: 1
maximum: 31
required:
- reg
additionalProperties: false
required:
- compatible
- interrupts
- interrupt-names
- vddadc-supply
- '#address-cells'
- '#size-cells'
- '#io-channel-cells'
additionalProperties: false
thermal:
description: Node describing the AB8500 thermal control block. All this block
really does is to fire an interrupt when the die becomes 130 degrees Celsius
in temperature.
type: object
properties:
compatible:
const: stericsson,abx500-temp
interrupts:
items:
- description: Thermal warm warning interrupt
interrupt-names:
items:
- const: ABX500_TEMP_WARM
required:
- compatible
- interrupts
- interrupt-names
additionalProperties: false
ab8500_fg:
description: Node describing the AB8500 fuel gauge control block.
type: object
$ref: ../power/supply/stericsson,ab8500-fg.yaml
ab8500_btemp:
description: Node describing the AB8500 battery temperature control block.
type: object
$ref: ../power/supply/stericsson,ab8500-btemp.yaml
ab8500_charger:
description: Node describing the AB8500 battery charger control block.
type: object
$ref: ../power/supply/stericsson,ab8500-charger.yaml
ab8500_chargalg:
description: Node describing the AB8500 battery charger algorithm.
type: object
$ref: ../power/supply/stericsson,ab8500-chargalg.yaml
phy:
description: Node describing the AB8500 USB PHY control block.
type: object
properties:
compatible:
const: stericsson,ab8500-usb
interrupts:
items:
- description: ID wakeup rising IRQ
- description: ID wakeup falling IRQ
- description: VBUS detection falling IRQ
- description: VBUS detection rising IRQ
- description: USB link status change IRQ
- description: ADP probe plug IRQ
- description: ADP probe unplug IRQ
interrupt-names:
items:
- const: ID_WAKEUP_R
- const: ID_WAKEUP_F
- const: VBUS_DET_F
- const: VBUS_DET_R
- const: USB_LINK_STATUS
- const: USB_ADP_PROBE_PLUG
- const: USB_ADP_PROBE_UNPLUG
vddulpivio18-supply: true
v-ape-supply: true
musb_1v8-supply: true
clocks:
items:
- description: PRCMY system clock
clock-names:
items:
- const: sysclk
'#phy-cells':
const: 0
required:
- compatible
- interrupts
- interrupt-names
- vddulpivio18-supply
- v-ape-supply
- musb_1v8-supply
- clocks
- clock-names
- '#phy-cells'
additionalProperties: false
key:
description: Node describing the AB8500 power-on key control block.
type: object
properties:
compatible:
const: stericsson,ab8500-poweron-key
interrupts:
items:
- description: ON key falling IRQ
- description: ON key rising IRQ
interrupt-names:
items:
- const: ONKEY_DBF
- const: ONKEY_DBR
required:
- compatible
- interrupts
- interrupt-names
additionalProperties: false
ab8500-sysctrl:
description: Node describing the AB8500 system control block.
type: object
properties:
compatible:
const: stericsson,ab8500-sysctrl
required:
- compatible
additionalProperties: false
codec:
description: Node describing the AB8500 audio codec block.
type: object
properties:
compatible:
const: stericsson,ab8500-codec
V-AUD-supply: true
V-AMIC1-supply: true
V-AMIC2-supply: true
V-DMIC-supply: true
clocks:
items:
- description: Audio system clock
clock-names:
items:
- const: audioclk
stericsson,earpeice-cmv:
description: Earpeice voltage
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 950, 1100, 1270, 1580 ]
required:
- compatible
additionalProperties: false
regulator:
description: Node describing the AB8500 internal regulators.
type: object
properties:
compatible:
enum:
- stericsson,ab8500-regulator
- stericsson,ab8505-regulator
vin-supply:
description: The regulator supplying all of the internal regulators
with power.
ab8500_ldo_aux1:
description: The voltage for the auxilary LDO regulator 1
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ldo_aux2:
description: The voltage for the auxilary LDO regulator 2
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ldo_aux3:
description: The voltage for the auxilary LDO regulator 3
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ldo_aux4:
description: The voltage for the auxilary LDO regulator 4
only present on AB8505
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ldo_aux5:
description: The voltage for the auxilary LDO regulator 5
only present on AB8505
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ldo_aux6:
description: The voltage for the auxilary LDO regulator 6
only present on AB8505
type: object
$ref: ../regulator/regulator.yaml#
# There is never any AUX7 regulator which is confusing
ab8500_ldo_aux8:
description: The voltage for the auxilary LDO regulator 8
only present on AB8505
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ldo_intcore:
description: The LDO regulator for the internal core voltage
of the AB8500
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ldo_adc:
description: Analog power regulator for the analog to digital converter
ADC, only present on AB8505
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ldo_tvout:
description: The voltage for the TV output regulator, incidentally
this voltage is also used for other purposes such as measuring
the temperature of the NTC thermistor on the battery.
Only present on AB8500.
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ldo_audio:
description: The LDO regulator for the audio codec output
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ldo_anamic1:
description: The LDO regulator for the analog microphone 1
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ldo_anamic2:
description: The LDO regulator for the analog microphone 2
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ldo_dmic:
description: The LDO regulator for the digital microphone
only present on AB8500
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ldo_ana:
description: Analog power regulator for CSI and DSI interfaces,
Camera Serial Interface CSI and Display Serial Interface DSI.
type: object
$ref: ../regulator/regulator.yaml#
required:
- compatible
additionalProperties: false
regulator-external:
description: Node describing the AB8500 external regulators. This
concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3
that are normally controlled by external electronics but also
sometimes need to be explicitly controlled by software.
type: object
properties:
compatible:
const: stericsson,ab8500-ext-regulator
ab8500_ext1:
description: The voltage for the VSMPS1 external regulator
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ext2:
description: The voltage for the VSMPS2 external regulator
type: object
$ref: ../regulator/regulator.yaml#
ab8500_ext3:
description: The voltage for the VSMPS3 external regulator
type: object
$ref: ../regulator/regulator.yaml#
required:
- compatible
additionalProperties: false
patternProperties:
"^pwm@[1-9]+?$":
type: object
$ref: ../pwm/pwm.yaml#
description: Represents each of the PWM blocks in the AB8500
properties:
compatible:
const: stericsson,ab8500-pwm
reg: true
clocks:
items:
- description: internal clock
clock-names:
items:
- const: intclk
required:
- compatible
- reg
required:
- compatible
- clock-controller
- gpio
- rtc
- adc
- thermal
- ab8500_fg
- ab8500_btemp
- ab8500_charger
- ab8500_chargalg
- phy
- key
- regulator
additionalProperties: false