blob: 92d46eb913a38b1b95e2117e8852945d8c820b01 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3ss-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Socionext UniPhier USB3 Super-Speed (SS) PHY
description: |
This describes the devicetree bindings for PHY interfaces built into
USB3 controller implemented on Socionext UniPhier SoCs.
Although the controller includes High-Speed PHY and Super-Speed PHY,
this describes about Super-Speed PHY.
maintainers:
- Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
properties:
compatible:
enum:
- socionext,uniphier-pro4-usb3-ssphy
- socionext,uniphier-pro5-usb3-ssphy
- socionext,uniphier-pxs2-usb3-ssphy
- socionext,uniphier-ld20-usb3-ssphy
- socionext,uniphier-pxs3-usb3-ssphy
- socionext,uniphier-nx1-usb3-ssphy
reg:
maxItems: 1
"#phy-cells":
const: 0
clocks:
minItems: 2
maxItems: 3
clock-names:
oneOf:
- items: # for Pro4, Pro5
- const: gio
- const: link
- items: # for PXs3 with phy-ext
- const: link
- const: phy
- const: phy-ext
- items: # for others
- const: link
- const: phy
resets:
maxItems: 2
reset-names:
oneOf:
- items: # for Pro4,Pro5
- const: gio
- const: link
- items: # for others
- const: link
- const: phy
vbus-supply:
description: A phandle to the regulator for USB VBUS
required:
- compatible
- reg
- "#phy-cells"
- clocks
- clock-names
- resets
- reset-names
- vbus-supply
additionalProperties: false
examples:
- |
usb-glue@65b00000 {
compatible = "socionext,uniphier-ld20-dwc3-glue",
"simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x65b00000 0x400>;
usb_ssphy0: ss-phy@300 {
compatible = "socionext,uniphier-ld20-usb3-ssphy";
reg = <0x300 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 14>, <&sys_clk 16>;
reset-names = "link", "phy";
resets = <&sys_rst 14>, <&sys_rst 16>;
vbus-supply = <&usb_vbus0>;
};
};