blob: be95f6b97b41a57a0ff7b1d7980a47be701d1780 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/auxdisplay/holtek,ht16k33.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Holtek HT16K33 RAM mapping 16*8 LED controller with keyscan
maintainers:
- Robin van der Gracht <robin@protonic.nl>
allOf:
- $ref: /schemas/input/matrix-keymap.yaml#
properties:
compatible:
oneOf:
- items:
- enum:
- adafruit,3108 # 0.56" 4-Digit 7-Segment FeatherWing Display (Red)
- adafruit,3130 # 0.54" Quad Alphanumeric FeatherWing Display (Red)
- const: holtek,ht16k33
- const: holtek,ht16k33 # Generic 16*8 LED controller with dot-matrix display
reg:
maxItems: 1
refresh-rate-hz:
maxItems: 1
description: Display update interval in Hertz for dot-matrix displays
interrupts:
maxItems: 1
debounce-delay-ms:
maxItems: 1
description: Debouncing interval time in milliseconds
linux,keymap: true
linux,no-autorepeat:
type: boolean
description: Disable keyrepeat
default-brightness-level:
minimum: 1
maximum: 16
default: 16
description: Initial brightness level
led:
type: object
$ref: /schemas/leds/common.yaml#
unevaluatedProperties: false
required:
- compatible
- reg
if:
properties:
compatible:
const: holtek,ht16k33
then:
required:
- refresh-rate-hz
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
ht16k33: ht16k33@70 {
compatible = "holtek,ht16k33";
reg = <0x70>;
refresh-rate-hz = <20>;
interrupt-parent = <&gpio4>;
interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
debounce-delay-ms = <50>;
linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
<MATRIX_KEY(3, 0, KEY_F8)>,
<MATRIX_KEY(4, 0, KEY_F10)>,
<MATRIX_KEY(5, 0, KEY_F4)>,
<MATRIX_KEY(6, 0, KEY_F2)>,
<MATRIX_KEY(2, 1, KEY_F5)>,
<MATRIX_KEY(3, 1, KEY_F7)>,
<MATRIX_KEY(4, 1, KEY_F9)>,
<MATRIX_KEY(5, 1, KEY_F3)>,
<MATRIX_KEY(6, 1, KEY_F1)>;
led {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_BACKLIGHT;
linux,default-trigger = "backlight";
};
};
};