blob: d6e51d0cf5464ba1d19239dcaaf54bf8abbac654 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/fsl,imx93-mipi-dsi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale i.MX93 specific extensions to Synopsys Designware MIPI DSI
maintainers:
- Liu Ying <victor.liu@nxp.com>
description: |
There is a Synopsys Designware MIPI DSI Host Controller and a Synopsys
Designware MIPI DPHY embedded in Freescale i.MX93 SoC. Some configurations
and extensions to them are controlled by i.MX93 media blk-ctrl.
allOf:
- $ref: snps,dw-mipi-dsi.yaml#
properties:
compatible:
const: fsl,imx93-mipi-dsi
clocks:
items:
- description: apb clock
- description: pixel clock
- description: PHY configuration clock
- description: PHY reference clock
clock-names:
items:
- const: pclk
- const: pix
- const: phy_cfg
- const: phy_ref
interrupts:
maxItems: 1
fsl,media-blk-ctrl:
$ref: /schemas/types.yaml#/definitions/phandle
description:
i.MX93 media blk-ctrl, as a syscon, controls pixel component bit map
configurations from LCDIF display controller to the MIPI DSI host
controller and MIPI DPHY PLL related configurations through PLL SoC
interface.
power-domains:
maxItems: 1
required:
- compatible
- interrupts
- fsl,media-blk-ctrl
- power-domains
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/imx93-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/fsl,imx93-power.h>
dsi@4ae10000 {
compatible = "fsl,imx93-mipi-dsi";
reg = <0x4ae10000 0x10000>;
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_MIPI_DSI_GATE>,
<&clk IMX93_CLK_MEDIA_DISP_PIX>,
<&clk IMX93_CLK_MIPI_PHY_CFG>,
<&clk IMX93_CLK_24M>;
clock-names = "pclk", "pix", "phy_cfg", "phy_ref";
fsl,media-blk-ctrl = <&media_blk_ctrl>;
power-domains = <&media_blk_ctrl IMX93_MEDIABLK_PD_MIPI_DSI>;
#address-cells = <1>;
#size-cells = <0>;
panel@0 {
compatible = "raydium,rm67191";
reg = <0>;
reset-gpios = <&adp5585gpio 6 GPIO_ACTIVE_LOW>;
dsi-lanes = <4>;
video-mode = <2>;
port {
panel_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi_to_lcdif: endpoint {
remote-endpoint = <&lcdif_to_dsi>;
};
};
port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};