blob: 747a2e9665f4fd7805a2269f4cb5916fdc60522c [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SM8450 Display MDSS
maintainers:
- Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
description:
SM8450 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
DPU display controller, DSI and DP interfaces etc.
$ref: /schemas/display/msm/mdss-common.yaml#
properties:
compatible:
const: qcom,sm8450-mdss
clocks:
items:
- description: Display AHB
- description: Display hf AXI
- description: Display sf AXI
- description: Display core
iommus:
maxItems: 1
interconnects:
maxItems: 3
interconnect-names:
maxItems: 3
patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
additionalProperties: true
properties:
compatible:
const: qcom,sm8450-dpu
"^displayport-controller@[0-9a-f]+$":
type: object
additionalProperties: true
properties:
compatible:
items:
- const: qcom,sm8450-dp
- const: qcom,sm8350-dp
"^dsi@[0-9a-f]+$":
type: object
additionalProperties: true
properties:
compatible:
items:
- const: qcom,sm8450-dsi-ctrl
- const: qcom,mdss-dsi-ctrl
"^phy@[0-9a-f]+$":
type: object
additionalProperties: true
properties:
compatible:
const: qcom,sm8450-dsi-phy-5nm
required:
- compatible
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,sm8450-dispcc.h>
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,sm8450.h>
#include <dt-bindings/power/qcom,rpmhpd.h>
display-subsystem@ae00000 {
compatible = "qcom,sm8450-mdss";
reg = <0x0ae00000 0x1000>;
reg-names = "mdss";
interconnects = <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>,
<&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
interconnect-names = "mdp0-mem",
"mdp1-mem",
"cpu-cfg";
resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
power-domains = <&dispcc MDSS_GDSC>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>,
<&gcc GCC_DISP_SF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
clock-names = "iface", "bus", "nrt_bus", "core";
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
iommus = <&apps_smmu 0x2800 0x402>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
display-controller@ae01000 {
compatible = "qcom,sm8450-dpu";
reg = <0x0ae01000 0x8f000>,
<0x0aeb0000 0x2008>;
reg-names = "mdp", "vbif";
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
<&gcc GCC_DISP_SF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "bus",
"nrt_bus",
"iface",
"lut",
"core",
"vsync";
assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpu_intf1_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
port@1 {
reg = <1>;
dpu_intf2_out: endpoint {
remote-endpoint = <&dsi1_in>;
};
};
};
mdp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-172000000{
opp-hz = /bits/ 64 <172000000>;
required-opps = <&rpmhpd_opp_low_svs_d1>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-325000000 {
opp-hz = /bits/ 64 <325000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-375000000 {
opp-hz = /bits/ 64 <375000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
dsi@ae94000 {
compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x0ae94000 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK>,
<&dispcc DISP_CC_MDSS_ESC0_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>;
clock-names = "byte",
"byte_intf",
"pixel",
"core",
"iface",
"bus";
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&dsi0_phy>;
phy-names = "dsi";
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&dpu_intf1_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
};
};
};
dsi_opp_table: opp-table {
compatible = "operating-points-v2";
opp-160310000{
opp-hz = /bits/ 64 <160310000>;
required-opps = <&rpmhpd_opp_low_svs_d1>;
};
opp-187500000 {
opp-hz = /bits/ 64 <187500000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-358000000 {
opp-hz = /bits/ 64 <358000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
};
};
dsi0_phy: phy@ae94400 {
compatible = "qcom,sm8450-dsi-phy-5nm";
reg = <0x0ae94400 0x200>,
<0x0ae94600 0x280>,
<0x0ae94900 0x260>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "ref";
vdds-supply = <&vreg_dsi_phy>;
};
dsi@ae96000 {
compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x0ae96000 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <5>;
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
<&dispcc DISP_CC_MDSS_PCLK1_CLK>,
<&dispcc DISP_CC_MDSS_ESC1_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>;
clock-names = "byte",
"byte_intf",
"pixel",
"core",
"iface",
"bus";
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
<&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&dsi1_phy>;
phy-names = "dsi";
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi1_in: endpoint {
remote-endpoint = <&dpu_intf2_out>;
};
};
port@1 {
reg = <1>;
dsi1_out: endpoint {
};
};
};
};
dsi1_phy: phy@ae96400 {
compatible = "qcom,sm8450-dsi-phy-5nm";
reg = <0x0ae96400 0x200>,
<0x0ae96600 0x280>,
<0x0ae96900 0x260>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "ref";
vdds-supply = <&vreg_dsi_phy>;
};
};
...