blob: bfcb1f364c3aa066a62ea686f824e0d3f68cf8af [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/gpio/intel,ixp4xx-gpio.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Intel IXP4xx XScale Networking Processors GPIO Controller
description: |
This GPIO controller is found in the Intel IXP4xx
processors. It supports 16 GPIO lines.
The interrupt portions of the GPIO controller is hierarchical.
The synchronous edge detector is part of the GPIO block, but the
actual enabling/disabling of the interrupt line is done in the
main IXP4xx interrupt controller which has a 1-to-1 mapping for
the first 12 GPIO lines to 12 system interrupts.
The remaining 4 GPIO lines can not be used for receiving
interrupts.
The interrupt parent of this GPIO controller must be the
IXP4xx interrupt controller.
GPIO 14 and 15 can be used as clock outputs rather than GPIO,
and this can be enabled by a special flag.
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
properties:
compatible:
const: intel,ixp4xx-gpio
reg:
maxItems: 1
gpio-controller: true
"#gpio-cells":
const: 2
interrupt-controller: true
"#interrupt-cells":
const: 2
intel,ixp4xx-gpio14-clkout:
description: If defined, enables clock output on GPIO 14
instead of GPIO.
type: boolean
intel,ixp4xx-gpio15-clkout:
description: If defined, enables clock output on GPIO 15
instead of GPIO.
type: boolean
required:
- compatible
- reg
- "#gpio-cells"
- interrupt-controller
- "#interrupt-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
gpio@c8004000 {
compatible = "intel,ixp4xx-gpio";
reg = <0xc8004000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};