| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor |
| |
| maintainers: |
| - Martin Kepplinger <martin.kepplinger@puri.sm> |
| |
| description: |- |
| The Hi-846 is a raw image sensor with an MIPI CSI-2 image data |
| interface and CCI (I2C compatible) control bus. The output format |
| is raw Bayer. |
| |
| allOf: |
| - $ref: /schemas/media/video-interface-devices.yaml# |
| |
| properties: |
| compatible: |
| const: hynix,hi846 |
| |
| reg: |
| maxItems: 1 |
| |
| clocks: |
| items: |
| - description: Reference to the mclk clock. |
| |
| assigned-clocks: |
| maxItems: 1 |
| |
| assigned-clock-rates: |
| maxItems: 1 |
| |
| reset-gpios: |
| description: Reference to the GPIO connected to the RESETB pin. Active low. |
| maxItems: 1 |
| |
| shutdown-gpios: |
| description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low. |
| maxItems: 1 |
| |
| vddio-supply: |
| description: Definition of the regulator used for the VDDIO power supply. |
| |
| vdda-supply: |
| description: Definition of the regulator used for the VDDA power supply. |
| |
| vddd-supply: |
| description: Definition of the regulator used for the VDDD power supply. |
| |
| port: |
| $ref: /schemas/graph.yaml#/$defs/port-base |
| unevaluatedProperties: false |
| |
| properties: |
| endpoint: |
| $ref: /schemas/media/video-interfaces.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| data-lanes: |
| oneOf: |
| - items: |
| - const: 1 |
| - const: 2 |
| - const: 3 |
| - const: 4 |
| - items: |
| - const: 1 |
| - const: 2 |
| |
| link-frequencies: true |
| |
| required: |
| - data-lanes |
| - link-frequencies |
| |
| required: |
| - compatible |
| - reg |
| - clocks |
| - assigned-clocks |
| - assigned-clock-rates |
| - vddio-supply |
| - vdda-supply |
| - vddd-supply |
| - port |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| hi846: camera@20 { |
| compatible = "hynix,hi846"; |
| reg = <0x20>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_csi1>; |
| clocks = <&clk 0>; |
| assigned-clocks = <&clk 0>; |
| assigned-clock-rates = <25000000>; |
| vdda-supply = <®_camera_vdda>; |
| vddd-supply = <®_camera_vddd>; |
| vddio-supply = <®_camera_vddio>; |
| reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
| shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; |
| orientation = <0>; |
| rotation = <0>; |
| |
| port { |
| camera_out: endpoint { |
| remote-endpoint = <&csi1_ep1>; |
| link-frequencies = /bits/ 64 |
| <80000000 200000000>; |
| data-lanes = <1 2>; |
| }; |
| }; |
| }; |
| }; |
| |
| ... |