| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/media/i2c/ovti,ov5670.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Omnivision OV5670 5 Megapixels raw image sensor |
| |
| maintainers: |
| - Jacopo Mondi <jacopo.mondi@ideasonboard.com> |
| |
| description: |- |
| The OV5670 is a 5 Megapixels raw image sensor which provides images in 10-bits |
| RAW BGGR Bayer format on a 2 data lanes MIPI CSI-2 serial interface and is |
| controlled through an I2C compatible control bus. |
| |
| properties: |
| compatible: |
| const: ovti,ov5670 |
| |
| reg: |
| maxItems: 1 |
| |
| clocks: |
| description: System clock. From 6 to 27 MHz. |
| maxItems: 1 |
| |
| powerdown-gpios: |
| description: Reference to the GPIO connected to the PWDNB pin. Active low. |
| |
| reset-gpios: |
| description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low. |
| maxItems: 1 |
| |
| avdd-supply: |
| description: Analog circuit power. Typically 2.8V. |
| |
| dvdd-supply: |
| description: Digital circuit power. Typically 1.2V. |
| |
| dovdd-supply: |
| description: Digital I/O circuit power. Typically 2.8V or 1.8V. |
| |
| port: |
| $ref: /schemas/graph.yaml#/$defs/port-base |
| additionalProperties: false |
| |
| properties: |
| endpoint: |
| $ref: /schemas/media/video-interfaces.yaml# |
| additionalProperties: false |
| |
| properties: |
| data-lanes: |
| minItems: 1 |
| maxItems: 2 |
| items: |
| enum: [1, 2] |
| |
| clock-noncontinuous: true |
| remote-endpoint: true |
| |
| required: |
| - compatible |
| - reg |
| - clocks |
| - port |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ov5670: sensor@36 { |
| compatible = "ovti,ov5670"; |
| reg = <0x36>; |
| |
| clocks = <&sensor_xclk>; |
| |
| port { |
| ov5670_ep: endpoint { |
| remote-endpoint = <&csi_ep>; |
| data-lanes = <1 2>; |
| clock-noncontinuous; |
| }; |
| }; |
| }; |
| }; |
| |
| ... |