| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/media/i2c/samsung,s5k5baf.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP |
| |
| maintainers: |
| - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
| |
| properties: |
| compatible: |
| const: samsung,s5k5baf |
| |
| reg: |
| maxItems: 1 |
| |
| clocks: |
| maxItems: 1 |
| |
| clock-names: |
| items: |
| - const: mclk |
| |
| clock-frequency: |
| default: 24000000 |
| description: mclk clock frequency |
| |
| rstn-gpios: |
| maxItems: 1 |
| description: RSTN pin |
| |
| stbyn-gpios: |
| maxItems: 1 |
| description: STDBYN pin |
| |
| vdda-supply: |
| description: Analog power supply 2.8V (2.6V to 3.0V) |
| |
| vddio-supply: |
| description: I/O power supply 1.8V (1.65V to 1.95V) or 2.8V (2.5V to 3.1V) |
| |
| vddreg-supply: |
| description: |
| Regulator input power supply 1.8V (1.7V to 1.9V) or 2.8V (2.6V to 3.0) |
| |
| port: |
| $ref: /schemas/graph.yaml#/$defs/port-base |
| additionalProperties: false |
| |
| properties: |
| endpoint: |
| $ref: /schemas/media/video-interfaces.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| data-lanes: |
| items: |
| - const: 1 |
| |
| required: |
| - compatible |
| - clocks |
| - clock-names |
| - rstn-gpios |
| - stbyn-gpios |
| - vdda-supply |
| - vddio-supply |
| - vddreg-supply |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| sensor@2d { |
| compatible = "samsung,s5k5baf"; |
| reg = <0x2d>; |
| clocks = <&camera 0>; |
| clock-names = "mclk"; |
| clock-frequency = <24000000>; |
| rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>; |
| stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>; |
| vdda-supply = <&cam_io_en_reg>; |
| vddio-supply = <&vtcam_reg>; |
| vddreg-supply = <&vt_core_15v_reg>; |
| |
| port { |
| endpoint { |
| remote-endpoint = <&csis1_ep>; |
| data-lanes = <1>; |
| }; |
| }; |
| }; |
| }; |
