| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/media/i2c/sony,imx214.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Sony 1/3.06-Inch 13.13MP CMOS Digital Image Sensor |
| |
| maintainers: |
| - Ricardo Ribalda <ribalda@kernel.org> |
| |
| description: | |
| The Sony IMX214 is a 1/3.06-inch CMOS active pixel digital image sensor with |
| an active array size of 4224H x 3200V. It is programmable through an I2C |
| interface. Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a |
| maximum throughput of 1.2Gbps/lane. |
| |
| allOf: |
| - $ref: ../video-interface-devices.yaml# |
| |
| properties: |
| compatible: |
| const: sony,imx214 |
| |
| reg: |
| enum: |
| - 0x10 |
| - 0x1a |
| |
| clocks: |
| description: Reference to the xclk clock. |
| maxItems: 1 |
| |
| clock-frequency: |
| description: Frequency of the xclk clock in Hz. |
| |
| enable-gpios: |
| description: GPIO descriptor for the enable pin. |
| maxItems: 1 |
| |
| vdddo-supply: |
| description: Chip digital IO regulator (1.8V). |
| |
| vdda-supply: |
| description: Chip analog regulator (2.7V). |
| |
| vddd-supply: |
| description: Chip digital core regulator (1.12V). |
| |
| flash-leds: true |
| lens-focus: true |
| |
| port: |
| $ref: /schemas/graph.yaml#/$defs/port-base |
| description: | |
| Video output port. |
| |
| properties: |
| endpoint: |
| $ref: /schemas/media/video-interfaces.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| data-lanes: |
| anyOf: |
| - items: |
| - const: 1 |
| - const: 2 |
| - items: |
| - const: 1 |
| - const: 2 |
| - const: 3 |
| - const: 4 |
| |
| link-frequencies: true |
| |
| required: |
| - data-lanes |
| - link-frequencies |
| |
| additionalProperties: false |
| |
| required: |
| - compatible |
| - reg |
| - clocks |
| - clock-frequency |
| - enable-gpios |
| - vdddo-supply |
| - vdda-supply |
| - vddd-supply |
| - port |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| camera-sensor@1a { |
| compatible = "sony,imx214"; |
| reg = <0x1a>; |
| vdddo-supply = <&pm8994_lvs1>; |
| vddd-supply = <&camera_vddd_1v12>; |
| vdda-supply = <&pm8994_l17>; |
| lens-focus = <&ad5820>; |
| enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; |
| clocks = <&camera_clk>; |
| clock-frequency = <24000000>; |
| |
| port { |
| imx214_ep: endpoint { |
| data-lanes = <1 2 3 4>; |
| link-frequencies = /bits/ 64 <480000000>; |
| remote-endpoint = <&csiphy0_ep>; |
| }; |
| }; |
| }; |
| }; |
| |
| ... |
