blob: 2f36ac23604c50b1e9838c6a3d8b10bdc873bdac [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2020 MediaTek Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: SMI (Smart Multimedia Interface) Common
maintainers:
- Yong Wu <yong.wu@mediatek.com>
description: |
The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
MediaTek SMI have two generations of HW architecture, here is the list
which generation the SoCs use:
generation 1: mt2701 and mt7623.
generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8186, mt8188, mt8192 and mt8195.
There's slight differences between the two SMI, for generation 2, the
register which control the iommu port is at each larb's register base. But
for generation 1, the register is at smi ao base(smi always on register
base). Besides that, the smi async clock should be prepared and enabled for
SMI generation 1 to transform the smi clock into emi clock domain, but that is
not needed for SMI generation 2.
properties:
compatible:
oneOf:
- enum:
- mediatek,mt2701-smi-common
- mediatek,mt2712-smi-common
- mediatek,mt6779-smi-common
- mediatek,mt6795-smi-common
- mediatek,mt8167-smi-common
- mediatek,mt8173-smi-common
- mediatek,mt8183-smi-common
- mediatek,mt8186-smi-common
- mediatek,mt8188-smi-common-vdo
- mediatek,mt8188-smi-common-vpp
- mediatek,mt8192-smi-common
- mediatek,mt8195-smi-common-vdo
- mediatek,mt8195-smi-common-vpp
- mediatek,mt8195-smi-sub-common
- mediatek,mt8365-smi-common
- description: for mt7623
items:
- const: mediatek,mt7623-smi-common
- const: mediatek,mt2701-smi-common
reg:
maxItems: 1
power-domains:
maxItems: 1
clocks:
description: |
apb and smi are mandatory. the async is only for generation 1 smi HW.
gals(global async local sync) also is optional, see below.
minItems: 2
items:
- description: apb is Advanced Peripheral Bus clock, It's the clock for
setting the register.
- description: smi is the clock for transfer data and command.
- description: Either asynchronous clock to help transform the smi clock
into the emi clock domain on Gen1 h/w, or the path0 clock of gals.
- description: gals1 is the path1 clock of gals.
clock-names:
minItems: 2
maxItems: 4
mediatek,smi:
$ref: /schemas/types.yaml#/definitions/phandle
description: a phandle to the smi-common node above. Only for sub-common.
required:
- compatible
- reg
- power-domains
- clocks
- clock-names
allOf:
- if: # only for gen1 HW
properties:
compatible:
contains:
enum:
- mediatek,mt2701-smi-common
then:
properties:
clocks:
minItems: 3
maxItems: 3
clock-names:
items:
- const: apb
- const: smi
- const: async
- if: # only for sub common
properties:
compatible:
contains:
enum:
- mediatek,mt8195-smi-sub-common
then:
required:
- mediatek,smi
properties:
clocks:
minItems: 3
maxItems: 3
clock-names:
items:
- const: apb
- const: smi
- const: gals0
else:
properties:
mediatek,smi: false
- if: # for gen2 HW that have gals
properties:
compatible:
enum:
- mediatek,mt6779-smi-common
- mediatek,mt8183-smi-common
- mediatek,mt8186-smi-common
- mediatek,mt8192-smi-common
- mediatek,mt8195-smi-common-vdo
- mediatek,mt8195-smi-common-vpp
- mediatek,mt8365-smi-common
then:
properties:
clocks:
minItems: 4
maxItems: 4
clock-names:
items:
- const: apb
- const: smi
- const: gals0
- const: gals1
- if: # for gen2 HW that don't have gals
properties:
compatible:
enum:
- mediatek,mt2712-smi-common
- mediatek,mt6795-smi-common
- mediatek,mt8167-smi-common
- mediatek,mt8173-smi-common
then:
properties:
clocks:
minItems: 2
maxItems: 2
clock-names:
items:
- const: apb
- const: smi
additionalProperties: false
examples:
- |+
#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/power/mt8173-power.h>
smi_common: smi@14022000 {
compatible = "mediatek,mt8173-smi-common";
reg = <0x14022000 0x1000>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_SMI_COMMON>,
<&mmsys CLK_MM_SMI_COMMON>;
clock-names = "apb", "smi";
};