blob: 5167d6eb904a139d73ce8a561a8045bd7b988759 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/ti,lp87561-q1.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI LP87561-Q1 single 4-phase output buck converter
maintainers:
- Keerthy <j-keerthy@ti.com>
properties:
compatible:
const: ti,lp87561-q1
reg:
description: I2C slave address
const: 0x60
reset-gpios:
description: GPIO connected to NRST pin (active low reset, pin 20)
maxItems: 1
gpio-controller: true
'#gpio-cells':
description:
The first cell is the pin number.
The second cell is is used to specify flags.
See ../gpio/gpio.txt for more information.
const: 2
buck3210-in-supply:
description:
Voltage regulator supply for all the four BUCK converters.
regulators:
type: object
properties:
buck3210:
type: object
$ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
required:
- buck3210
additionalProperties: false
required:
- compatible
- reg
- gpio-controller
- '#gpio-cells'
- buck3210-in-supply
additionalProperties: false
examples:
- |
i2c@0 {
reg = <0x0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
pmic@60 {
compatible = "ti,lp87561-q1";
reg = <0x60>;
gpio-controller;
#gpio-cells = <2>;
buck3210-in-supply = <&vsys_3v3>;
regulators {
buck3210_reg: buck3210 {
/* VDD_CORE */
regulator-name = "buck3210";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
...