blob: c2ae79df424fda1be7f8be2b2c3d304df9040c60 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-tlmm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Technologies, Inc. SM8550 TLMM block
maintainers:
- Abel Vesa <abel.vesa@linaro.org>
description:
Top Level Mode Multiplexer pin controller in Qualcomm SM8550 SoC.
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
properties:
compatible:
const: qcom,sm8550-tlmm
reg:
maxItems: 1
interrupts:
maxItems: 1
gpio-reserved-ranges:
minItems: 1
maxItems: 105
gpio-line-names:
maxItems: 210
patternProperties:
"-state$":
oneOf:
- $ref: "#/$defs/qcom-sm8550-tlmm-state"
- patternProperties:
"-pins$":
$ref: "#/$defs/qcom-sm8550-tlmm-state"
additionalProperties: false
$defs:
qcom-sm8550-tlmm-state:
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
description:
List of gpio pins affected by the properties specified in this
subnode.
items:
oneOf:
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
- enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
minItems: 1
maxItems: 36
function:
description:
Specify the alternative function to be configured for the specified
pins.
enum: [ aon_cci, aoss_cti, atest_char, atest_usb,
audio_ext_mclk0, audio_ext_mclk1, audio_ref_clk,
cam_aon_mclk4, cam_mclk, cci_async_in, cci_i2c_scl,
cci_i2c_sda, cci_timer, cmu_rng, coex_uart1_rx,
coex_uart1_tx, coex_uart2_rx, coex_uart2_tx,
cri_trng, dbg_out_clk, ddr_bist_complete,
ddr_bist_fail, ddr_bist_start, ddr_bist_stop,
ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot,
gcc_gp1, gcc_gp2, gcc_gp3, gpio, i2chub0_se0,
i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4,
i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8,
i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck,
i2s0_ws, i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws,
ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0_out,
mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out,
mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2,
pcie0_clk_req_n, pcie1_clk_req_n, phase_flag,
pll_bist_sync, pll_clk_aux, prng_rosc0, prng_rosc1,
prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
qlink0_enable, qlink0_request, qlink0_wmss,
qlink1_enable, qlink1_request, qlink1_wmss,
qlink2_enable, qlink2_request, qlink2_wmss,
qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs,
qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4,
qup1_se5, qup1_se6, qup1_se7, qup2_se0,
qup2_se0_l0_mira, qup2_se0_l0_mirb, qup2_se0_l1_mira,
qup2_se0_l1_mirb, qup2_se0_l2_mira, qup2_se0_l2_mirb,
qup2_se0_l3_mira, qup2_se0_l3_mirb, qup2_se1,
qup2_se2, qup2_se3, qup2_se4, qup2_se5, qup2_se6,
qup2_se7, sd_write_protect, sdc40, sdc41, sdc42,
sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4,
tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2,
tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3,
uim0_clk, uim0_data, uim0_present, uim0_reset,
uim1_clk, uim1_data, uim1_present, uim1_reset,
usb1_hs, usb_phy, vfr_0, vfr_1, vsense_trigger_mirnat ]
required:
- pins
required:
- compatible
- reg
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
tlmm: pinctrl@f100000 {
compatible = "qcom,sm8550-tlmm";
reg = <0x0f100000 0x300000>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&tlmm 0 0 211>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-wo-state {
pins = "gpio1";
function = "gpio";
};
uart-w-state {
rx-pins {
pins = "gpio26";
function = "qup2_se7";
bias-pull-up;
};
tx-pins {
pins = "gpio27";
function = "qup2_se7";
bias-disable;
};
};
};
...