blob: 3723717dc1f6594d4d1fdb3de29609a34f737b52 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/supply/richtek,rt9467.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Richtek RT9467 Switching Battery Charger with Power Path Management
maintainers:
- ChiYuan Huang <cy_huang@richtek.com>
- ChiaEn Wu <chiaen_wu@richtek.com>
description: |
RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for
portable applications. It integrates a synchronous PWM controller, power
MOSFETs, input current sensing and regulation, high-accuracy voltage
regulation, and charge termination. The charge current is regulated through
integrated sensing resistors.
The RT9467 also features USB On-The-Go (OTG) support. It also integrates
D+/D- pin for USB host/charging port detection.
Datasheet is available at
https://www.richtek.com/assets/product_file/RT9467/DS9467-01.pdf
properties:
compatible:
const: richtek,rt9467
reg:
maxItems: 1
wakeup-source: true
interrupts:
maxItems: 1
charge-enable-gpios:
description: GPIO is used to turn on and off charging.
maxItems: 1
usb-otg-vbus-regulator:
type: object
description: OTG boost regulator.
unevaluatedProperties: false
$ref: /schemas/regulator/regulator.yaml#
properties:
enable-gpios: true
required:
- compatible
- reg
- wakeup-source
- interrupts
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
charger@5b {
compatible = "richtek,rt9467";
reg = <0x5b>;
wakeup-source;
interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>;
rt9467_otg_vbus: usb-otg-vbus-regulator {
regulator-name = "rt9467-usb-otg-vbus";
regulator-min-microvolt = <4425000>;
regulator-max-microvolt = <5825000>;
regulator-min-microamp = <500000>;
regulator-max-microamp = <3000000>;
};
};
};