| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/sound/adi,ssm2518.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Analog Devices SSM2518 audio amplifier |
| |
| maintainers: |
| - Lars-Peter Clausen <lars@metafoo.de> |
| |
| allOf: |
| - $ref: dai-common.yaml# |
| |
| properties: |
| compatible: |
| const: adi,ssm2518 |
| |
| reg: |
| maxItems: 1 |
| description: | |
| I2C address of the device. This will either be 0x34 (ADDR pin low) |
| or 0x35 (ADDR pin high) |
| |
| gpios: |
| maxItems: 1 |
| description: | |
| GPIO connected to the nSD pin. If the property is not present |
| it is assumed that the nSD pin is hardwired to always on. |
| |
| required: |
| - compatible |
| - reg |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| codec@34 { |
| compatible = "adi,ssm2518"; |
| reg = <0x34>; |
| gpios = <&gpio 5 0>; |
| }; |
| }; |
