| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/sound/qcom,wsa883x.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Qualcomm WSA8830/WSA8832/WSA8835 |
| smart speaker amplifier |
| |
| maintainers: |
| - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> |
| |
| description: | |
| WSA883X is the Qualcomm Aqstic smart speaker amplifier |
| Their primary operating mode uses a SoundWire digital audio |
| interface. This binding is for SoundWire interface. |
| |
| allOf: |
| - $ref: dai-common.yaml# |
| |
| properties: |
| compatible: |
| const: sdw10217020200 |
| |
| reg: |
| maxItems: 1 |
| |
| powerdown-gpios: |
| description: GPIO spec for Powerdown/Shutdown line to use (pin SD_N) |
| maxItems: 1 |
| |
| vdd-supply: |
| description: VDD Supply for the Codec |
| |
| '#thermal-sensor-cells': |
| const: 0 |
| |
| '#sound-dai-cells': |
| const: 0 |
| |
| required: |
| - compatible |
| - reg |
| - vdd-supply |
| - powerdown-gpios |
| - "#thermal-sensor-cells" |
| - "#sound-dai-cells" |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| |
| soundwire@3250000 { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| reg = <0x3250000 0x2000>; |
| |
| speaker@0,1 { |
| compatible = "sdw10217020200"; |
| reg = <0 1>; |
| powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; |
| vdd-supply = <&vreg_s10b_1p8>; |
| #thermal-sensor-cells = <0>; |
| #sound-dai-cells = <0>; |
| sound-name-prefix = "SpkrLeft"; |
| }; |
| |
| speaker@0,2 { |
| compatible = "sdw10217020200"; |
| reg = <0 2>; |
| powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; |
| vdd-supply = <&vreg_s10b_1p8>; |
| #thermal-sensor-cells = <0>; |
| #sound-dai-cells = <0>; |
| sound-name-prefix = "SpkrRight"; |
| }; |
| }; |
| |
| ... |
